Hillo~
My Samsung Galaxy P3110 suddenly keeps restarting itself 2 weeks ago until now.
I did hard reset using POWER button + VOLUMN UP button, even it says everything was wiped, but when the table get started, everything are still there, even my passwords and wallpapers.
Then it will start itself again. It does it about 10 - 20 seconds after it started.
When I manually removed widgets, uninstall apps, after it restarts, they are still there.
I did used odin and follow some instructions I found on the internet, even it says "PASS", but in real, it doesn't work for anything, the problem is still there.
My tablet is running under CyanogenMod.
Is there anyone can help me with this?
I will be so much appreciate if you guys can help me fix the problem.
Thankz in advance!
Related
Ok well i downloaded and installed the redemption Rom on my galaxy note 10.1 .GT-N8013 and after doing so now my lock screen, the power button options and side option went i pull out the s pen and a few other things no longer work. Also wen i turn off then boot up my tablet i get a error message at the beginning saying that you are still in factory mode and there are a couple of programs not running correctly disabling wifi. If i could possibly get help on this problem i would greatly appreciate it. Thanks
Any one possibly know wits going on?
Hello good people
Firstly, i want to say that i searched the forum for this and i couldn't find an answer or a solution to my problem. So here it is:
I have a SGS Plus I9001 which cannot stay ON more than 1 sec. I turn on the phone, all the logos and texts pass, but when the menu shows, after 1-2 seconds the phone turns off completly or restarts itself. I have a long hisoty with my phone however :cyclops: I used a normal 2.3.6 android and then switched to CyanogenMod 10.1. It worked just fine. I was very, very happy with it. One night i left the phone charging and when i woke up in the morning, the phone was dead. Completly DEAD! Services change the whole motherboard and the phone worked just fine for about 1-2 hours and then this happened. I opened it up and saw that the motherboard shows "SGH-T959". I tried installing stock roms, different versions of Cyanogen and Kernels but nothing can turn on the phone and make it work. It just restarts itself. The only thing i ave managed to install via Odin is CWM Recovery.. However, my knowledge of this is limited so here i am seeking for your assistance
PS. I tried changing the power button but no luck.. still the same..
If anyone is interested in this problem, please post an answer or question (if you need more information)..
Thank you!
Deni
I wanted to solve this problem on my own but after almost 6 hours I just can't figure it out. Its either totally bricked or I'm just missing something simple. I've seen many people complain about this problem but none of them seem to have had the same problem I do. Thing is I was just really starting to love the way I had the phone set up. DAMN!
I used this thread to root: (CF)
http://forum.xda-developers.com/sprint-galaxy-s5/help/q-root-galaxy-s5-sport-sm-860p-t2859473
SPRINT GALAXY S5 SPORT SM-G860P
Android 4.4
I had CW recovery installed
(wish I had more info about the software)
Here's whats happening:
START
(vibrate)
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
(Also on Screen are the logos)
Samsung Galaxy S5 Sport
Powered by Android
This stays on for about 10 seconds.
Then blank screen (2 seconds)
(vibrate)
Screen still blank (2 seconds)
REPEAT (Auto reboot and goes back to start)
Other notes:
Trying to boot into recovery (home+vol up+power) Nothing Happens
Try to power off and nothing happens.
Pulled battery, did the 30 sec and restarted no change.
I have all updated usb drivers.
Odin will not see the device because its not on long enough. (Kies didn't see it either.)
Plug into PC via usb - Nothing Happens, device doesn't even show up because its not on long enough (win 8.1 and 7)
Pull battery to get it to stop, once battery goes back in, it auto starts again.
I TRIED AS MANY SD CARD / BATTERY/USB CABLE/POWER CABLE/BATTERY PULL/BUTTON COMBINATIONS AS I COULD FIND ONLINE AND THEN SOME. No Luck with anything.
I know this isn't a "help desk" I just wanted to give as much info as possible hoping to help you help me!
Please point me in the right direction.
Thanks!
Try to hard-reset your phone. There is a button combination for that., search it over the internet.
Thanks for the reply.
Unfortunately the hard reset combo does nothing. I've tried every button combination that I have been able to find with no luck. Factory reset, hard reset, etc. etc. no luck. I've also searched for a possible "hidden" button underneath the back cover or something of the like...nothing.
hmmmm
At least, it is not hard-bricked. So there is hope.
Have you checked if it is entering the download mode? If not, then try it. You can use this mode to flash file via the PC.
Check this link
It worked! Obviously I didn't search or try as many things as I thought I did. : / I can't thank you enough! wow. Amazing!
Thread closed.
So I own a Samsung galaxy tab 2 10.1 and I have it rooted using king of roots.I was occasionaly experiencing tablet freezing and then restarting on its own.Recently,while I was away,I think it downloaded some updates or something.When I tried to look at it,it restarted and from that time it gives me only a small amount of time like 10 seconds or something and then it restarts again and again.I tried to hard reset it half a dozen of times but everytime i reboot it everything is the same and it keep restarting like before.Any ideas on how to fix this ?I would really appreciate your help here guys.
so i tried to recover it using odin but still nothing happened.any ideas?
Sorry if this is the wrong place to put this in but I´ve been going nuts for hours and finding no solution to my problem.
I have a practically new Fusion5 108 tablet runing marshmallow. Today I was setting it up on first use and I hate that persistant google search bar. Didn´t find an easy way to remove via settings so I took to Google for answers (ironic I know). I found the same suggestion on several sites: going into apps and disable google app, and restart tablet. So I did that, but when I restarted it got stuck in an ¨optimizing apps¨ boot loop... it did 2 out of 2, then seemed it would start and then again back to optimizing. I was going to try just wiping and reseting from recovery mode, but I get a NO COMMAND when attempting recover. I tried EVERY possible combination with the only 3 buttons it has (power, volume +/-) and even tried a small reset button it has (which just resets the tablet) and still cannot go into recovery. I even opened it up and killed the battery connection and reconnected to see if that helped, the only difference it made was that after doing that it said ¨optimizing 2 our of 4 instead of 2 out of 2 like before. At this point I´m about to just throw it in the trash so any ideas would be useful. I never got to enabling debugging to try to connect it via PC either.
HELP?????
emv1031 said:
Sorry if this is the wrong place to put this in but I´ve been going nuts for hours and finding no solution to my problem.
I have a practically new Fusion5 108 tablet runing marshmallow. Today I was setting it up on first use and I hate that persistant google search bar. Didn´t find an easy way to remove via settings so I took to Google for answers (ironic I know). I found the same suggestion on several sites: going into apps and disable google app, and restart tablet. So I did that, but when I restarted it got stuck in an ¨optimizing apps¨ boot loop... it did 2 out of 2, then seemed it would start and then again back to optimizing. I was going to try just wiping and reseting from recovery mode, but I get a NO COMMAND when attempting recover. I tried EVERY possible combination with the only 3 buttons it has (power, volume +/-) and even tried a small reset button it has (which just resets the tablet) and still cannot go into recovery. I even opened it up and killed the battery connection and reconnected to see if that helped, the only difference it made was that after doing that it said ¨optimizing 2 our of 4 instead of 2 out of 2 like before. At this point I´m about to just throw it in the trash so any ideas would be useful. I never got to enabling debugging to try to connect it via PC either.
HELP?????
Click to expand...
Click to collapse
I would look up the Fusion5 website and send them an Email explaining the problem as they may be able to help. I had to contact them when I had wifi connection problem and they were very helpful.....it's worth a try before you throw it in the trash.