4.4 Camera - Sony Xperia M2

Is there any KK camera port to JB?

peter-k said:
Is there any KK camera port to JB?
Click to expand...
Click to collapse
Why don't you update to KK ?

Kzeran said:
Why don't you update to KK ?
Click to expand...
Click to collapse
Maybe, he can't update? D:
I'll have the same question as him, 'cause of the update. My country (Chile) doesn't have the update. It's just planned, but, no update yet.

xLobito said:
Maybe, he can't update? D:
I'll have the same question as him, 'cause of the update. My country (Chile) doesn't have the update. It's just planned, but, no update yet.
Click to expand...
Click to collapse
You can always update by flashing a FTF

I can update and I can also flash. I would like to stay with JB. But I will install 4.4, if I'm left with no choice, bcs. the 4.3 pic quality is just about the same as what I could get from a 80 bucks China-Tupperware.

Garcia98 said:
You can always update by flashing a FTF
Click to expand...
Click to collapse
But, if I flash a 4.4.2 Stock Firmware Brazilian Generic (D2306 model). My carrier (Movistar Chile) can works fine with this? I don't know about flashing a Firmware xD. Just know a few things but, not too much for me flash my phone without get bricked D:
Thanks >.<.
PD: Dam... 4.3 camera D:

xLobito said:
But, if I flash a 4.4.2 Stock Firmware Brazilian Generic (D2306 model). My carrier (Movistar Chile) can works fine with this? I don't know about flashing a Firmware xD. Just know a few things but, not too much for me flash my phone without get bricked D:
Thanks >.<.
PD: Dam... 4.3 camera D:
Click to expand...
Click to collapse
Yep, it will work well

Related

need stock firmware for canadian N8010

Looking for the the stock firmware or even the firmware # for N8010 Canadian version. Even the ICS would be good. Any help would be appreciated.
Striker333 said:
Looking for the the stock firmware or even the firmware # for N8010 Canadian version. Even the ICS would be good. Any help would be appreciated.
Click to expand...
Click to collapse
Yeah same, i had it rooted, seen there was the JB update, so i flashed back to stock using a guide on XDA
Now i try to update it and it says there's no update. Halp
The 4.1.2 was posted here:
eusor said:
Here, sorry for the delay : http://alpha.cp8.ca/gnote101/N8010XXUCMA5_N8010XACCMA2_805288_REV00.zip
Note: I didn't test it, grabbed it while updating from Kies.
Click to expand...
Click to collapse
eusor said:
Nope, that's the full 4.1.2 stock rom.
Click to expand...
Click to collapse
Would be nice if someone can post the 4.0.4 too.

[Q] Android 4.2.2 Newest firmware

Hello I'm currently on the 15.3.A.0.26 update. As far as I know Sony released an update on their 4.2.2. Is it worth updating? Because I got a custom kernel so I cannot download the rom from the update center.
Thanks.
All upon you. Yes, there are don't bugs like the proximity sensor bug but those can be easily fixed. Yeah, camera has also improved a bit. Not much changes though, if you're satisfied with your kernel I don't recommend you to update.
Your choice to be honest.
I have a question.
Im using stock 0.26 with thunderzap 3.1 kernel. rooted BL unlocked, of course.
But just now Update center notified me of the 1.12 update is available. Its just 40MB
Can I update it through the air and then reflash thunderzap? I wont lost any data and apps, right?
edit: just realized I would also have to reroot, right? but its no problem, riiight?
Hackner said:
I have a question.
Im using stock 0.26 with thunderzap 3.1 kernel. rooted BL unlocked, of course.
But just now Update center notified me of the 1.12 update is available. Its just 40MB
Can I update it through the air and then reflash thunderzap? I wont lost any data and apps, right?
edit: just realized I would also have to reroot, right? but its no problem, riiight?
Click to expand...
Click to collapse
No......you can brick your fone....to update flash a ftf on flashtool....
Hipom said:
No......you can brick your fone....to update flash a ftf on flashtool....
Click to expand...
Click to collapse
oh, thanks man. I guess ill just wait for CM from Brinly then.

[Q] How to install stock rom again

Hi. I have cyanogenmod 11 on my samsung note 3 (sm-n9005) and would like to install the stock 4.4.2 frimware... How can I do that? I can not find the firmware for my n9005xxudmj7... Or can I just download any firmware and use that? I am from Norway.
And then I would like to install the x-note 13 rom. That I can not do now because of the old bootloader on cyanogenmod 11.
http://forum.xda-developers.com/showthread.php?t=2704363
XperienceD said:
http://forum.xda-developers.com/showthread.php?t=2704363
Click to expand...
Click to collapse
Thanx. But should I just choose a firmware from any country? I dont se a firmware for Norway...
leff123 said:
Thanx. But should I just choose a firmware from any country? I dont se a firmware for Norway...
Click to expand...
Click to collapse
I found out that I can use other contries rom. So thanx again
leff123 said:
Thanx. But should I just choose a firmware from any country? I dont se a firmware for Norway...
Click to expand...
Click to collapse
I tend to go for a generic ROM, so if there isn't one for your country then that's what I'd look for.
XperienceD said:
I tend to go for a generic ROM, so if there isn't one for your country then that's what I'd look for.
Click to expand...
Click to collapse
Now I have stock rom 4.4.2 and no root. Not shure if I dare to do more on my phone... Maybe I should stay with the stock android. But if I know myselfe well I most sertanly will do something with my phone. One thing I think is rare is that when booting it dont show that the knox is tripped... how come? It just start like it came from the factory.
Find a Stock ROM from Sammobile and split, then flash it with Odin. Find a detailed guide.
Sent from my GT-P3110 using XDA Premium 4 mobile app
Modding??
leff123 said:
Now I have stock rom 4.4.2 and no root. Not shure if I dare to do more on my phone... Maybe I should stay with the stock android. But if I know myselfe well I most sertanly will do something with my phone. One thing I think is rare is that when booting it dont show that the knox is tripped... how come? It just start like it came from the factory.
Click to expand...
Click to collapse
If your looking into a custom firmware, I would suggest taking a look at SlimRom for you phone HERE. I have the Galaxy S3 with Slimrom and its way smooth!. Take a look at the features, because there are many!..
xKJTx

no stock 4.2.2 for my region

hey everybody... im on p5100 4.1.2 and couldn't update to 4.2.2 because i'm from asia and my region is not supported. is there anyway i could flash to the latest firmware without custom rom?
hmgan said:
hey everybody... im on p5100 4.1.2 and couldn't update to 4.2.2 because i'm from asia and my region is not supported. is there anyway i could flash to the latest firmware without custom rom?
Click to expand...
Click to collapse
Just try one from another region. Grab it from Sammobile.com
CSP III said:
Just try one from another region. Grab it from Sammobile.com
Click to expand...
Click to collapse
thanks for the suggestion bro but what will happen if i install from other region? will the 3G work? everything else work? can update with ODIN and still retain all my files/settings/etc ?
hmgan said:
thanks for the suggestion bro but what will happen if i install from other region? will the 3G work? everything else work? can update with ODIN and still retain all my files/settings/etc ?
Click to expand...
Click to collapse
Yes, as long as its a P5100 file.
Send from OnePlus One using Tapatalk

S7 Snapdragon Battery Blues

Hey guys,
So I'm running a stock S7 (AT&T) and have read tons of threads about how to fix battery drain, etc etc. And I'm not finding any great result.
I've tried different debloats and dumbing down lots of system settings, but haven't found that sweet spot yet. I know disabling some things can end up causing further drain, so maybe I'm doing it wrong.
Has there been any definitive solution to fixing the Android System drain? Mine is constantly 30% or more drain at the end of the day.
Any help is greatly appreciated!
Firmware . Mostly older firmwares like apc8 or apf2.
fureedx said:
Firmware . Mostly older firmwares like apc8 or apf2.
Click to expand...
Click to collapse
You mean rolling back my firmware would improve it?
CobraStrike said:
You mean rolling back my firmware would improve it?
Click to expand...
Click to collapse
If you updated to API2 you can't go back.
VenomMOD said:
If you updated to API2 you can't go back.
Click to expand...
Click to collapse
Damn. You always assume updating will FIX bugs. Haha.
CobraStrike said:
Damn. You always assume updating will FIX bugs. Haha.
Click to expand...
Click to collapse
API2 has an updated bootloader. You can't downgrade to any other version of the AT&T firmware unless it's Bootloader 4... This is what I meant when I said "You can't go back."
VenomMOD said:
API2 has an updated bootloader. You can't downgrade to any other version of the AT&T firmware unless it's Bootloader 4... This is what I meant when I said "You can't go back."
Click to expand...
Click to collapse
I just traded in mine for another to see if it improves anything... What firmware should i stick with?
CobraStrike said:
I just traded in mine for another to see if it improves anything... What firmware should i stick with?
Click to expand...
Click to collapse
Stay on stock for awhile and try not to take any OTAs. There are multiple complaints about the latest updates causing a lot of battery drain.
VenomMOD said:
Stay on stock for awhile and try not to take any OTAs. There are multiple complaints about the latest updates causing a lot of battery drain.
Click to expand...
Click to collapse
Alright, will do. I'll post with an update. Thanks, man.
CobraStrike said:
Alright, will do. I'll post with an update. Thanks, man.
Click to expand...
Click to collapse
I also have a 930A , just dont update the bootloader , that is BL in odin . Rest you can install the latest using odin . People have been paying 15$ and buying AT&T updates from the persian site . Check S7 At&t forums
Here's the latest firmware for the G930A if you need it
http://forum.xda-developers.com/att...are-g930aucs4api2-bootloader-4-t3481957/page3
kuduku said:
I also have a 930A , just dont update the bootloader , that is BL in odin . Rest you can install the latest using odin . People have been paying 15$ and buying AT&T updates from the persian site . Check S7 At&t forums
Click to expand...
Click to collapse
Dude... you're going to have to help me out, because I have no idea what you're talking about. Haha.
Looks like this one came on APE1. Should I stick with it and not update at all or what? Phone is unrooted.
CobraStrike said:
Looks like this one came on APE1. Should I stick with it and not update at all or what? Phone is unrooted.
Click to expand...
Click to collapse
You are on May update
to update download from link posted before
then use this http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039 to go back to stock
Do exactly as its in this but change AP , CP and CSC as per new downloaded file .
You will be then on unrooted API2 but it has Android system battery drain
kuduku said:
You are on May update
to update download from link posted before
then use this http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039 to go back to stock
Do exactly as its in this but change AP , CP and CSC as per new downloaded file .
You will be then on unrooted API2 but it has Android system battery drain
Click to expand...
Click to collapse
I'm not rooted at the moment... Wouldn't it just be easier to accept the OTA update?
I exchanged my device for a new one already.
CobraStrike said:
I'm not rooted at the moment... Wouldn't it just be easier to accept the OTA update?
I exchanged my device for a new one already.
Click to expand...
Click to collapse
OTA can be taken but that would upgrade your BL to 4 , then you are stuck on API only
kuduku said:
OTA can be taken but that would upgrade your BL to 4 , then you are stuck on API only
Click to expand...
Click to collapse
Ah, so the idea is to update without updating the bootloader, huh?
Is there any way to do this without root?
Sorry, man... I'm a complete noob and haven't rooted a phone in a while.
CobraStrike said:
Ah, so the idea is to update without updating the bootloader, huh?
Is there any way to do this without root?
Sorry, man... I'm a complete noob and haven't rooted a phone in a while.
Click to expand...
Click to collapse
1 . yes
2. All without root only
3. Gave you all the links /Guide earlier
No requirement of rooting in this anywhere . Just using odin
kuduku said:
1 . yes
2. All without root only
3. Gave you all the links /Guide earlier
No requirement of rooting in this anywhere . Just using odin
Click to expand...
Click to collapse
Ah, alright. Thanks a lot, man. I'll do this when I get home. I keep getting pesky update requests!
I read everything over and i see what you're talking about. Download and flash all updates besides the BL which is the bootloader... But I'm trying to get away from the battery drain. Should I flash a previous firmware instead of the current for better battery life?
Also, what's the big benefit of having an older bootloader? So you can upgrade and downgrade at will?

Categories

Resources