Database Info

[EI22] Stock-ish MTD Build [Update 12/21]

Note: This is a MTD build. If you don't know what that is, read about it here
If you don't want MTD, don't flash this.
As an added bonus of going to MTD, you get more space in /data. Its almost 700mb now
Because this is MTD, you cant flash other kernels until they become MTD compatible!
To go back to pure stock, you'll need Odin or Heimdall.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
To install:
1 - Download the zip
2 - Make a nandroid backup!
3 - Flash the zip
4 - If you want, follow the steps to restore your data
5 - ??
6 - Profit!
When coming from another MTD rom/build, this will NOT wipe data. If your using BML, it will. So please beware, and make backups.
Also, please note that this is not perfect. Theres a special splash logo right now, I hope you enjoy it. I may improve on this later. Update: New splash!
Tweaks:
-All deodexed
-Pre-rooted
-1% Battery
-CRT off
-Wireless Hotspot
-1x/3g Icons
-No CIQ
-GPS Fix
-Almost all bloatware removed
Kernel Tweaks
-Voodoo Sound
-Many speed/efficiency tweaks
-Slight Undervolt
-No overclock, stock frequencies
-Added extra CPU governors, use Set CPU to change
-More that I cant remember
Changelog in 3rd post!
Download links:
Version 3 (12/21) - Download
V3 Kernel Only (Thanks zman0900!) - Download
Older versions:
Version 2 (12/20) - Download
Version 1 - Download
Some more notes: You can restore your old system too, use the data restore guide, and modify it for the system backup.
All stock themes/mods (Other than kernels) will flash fine. The kernel is the most important part of this build.
Note: To make themes/mods work, you will need to go to Mounts and mount system before flashing the zip. Pretty much every zip tries to mount the BML system.
The kernel sources for this are located here
To make a working MTD kernel is more difficult than stock, Ill post the process later.
Thanks to:
noobnl (Boot.img)
xBTx (Deodexed files)
k0nane (NoCIQ)
Necrosan (Hotspot)
AproSamurai (Info)
CM Team
SenseiSimple (1x/3g)
And more

To restore data from a nandroid backup:
1 - Mount your sdcard as USB storage
2 - Navigate to clockworkmod/backups/<LAST BACKUP>/
3 - Rename system.rfs.tar to system.yaffs2.tar, data.rfs.tar to data.yaffs2.tar
4 - Open the nandroid.md5 file, replace all rfs in the filenames with yaffs2
5 - Save/close, unmount USB, and reboot into recovery
6 - Advanced restore data (And system if you really want). Only advanced restore, or else it will give you a BML kernel and recovery, which wont boot
7 - Reboot!
(If you were on ext4, just replace rfs with ext4)
If you want your previous Rom, advanced restore system too.

Changelog:
Version 3 - 12/21
Upped voltages to prevent lockups/reboots
Added stock android keyboard (Haptic feedback doesnt work though)
Version 2 - 12/20
Added 1x icon (Thanks to SenseiSimple)
Updated kernel to fix splash issue
Added SuperUser.apk to /system/app (Whoops)
Updated su binary
Confirmed GPS fix
Added extra ringtones and notification tones, from a mix of other devices
Changed the hotspot app name from 'Sprint Hotspot' to 'Wireless Hotspot'
Version 1 - 12/19
Initial release

Yay
1st
10chars

Thanks guys.
Also to reiterate, this is for people on MTD who want a stock experience, overall nothing out of the ordinary or special added to this kernel. This for the meantime is so people don't have to go back to BML for features of their phone which they don't have on AOSP distributions. For non stock features, you're going to have to wait until someone decides to do them otherwise this process isn't as simple as forking someones github and compiling.

1st page reserve. Great job to all involved.
/temporary sig
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Needs crt on and 1x fix. Just sayin. Sooo glad to see this finally for those who don't want MIUI or Cyanogen. Thank you.
Sent from my SPH-D700 using Tapatalk

Perfect timing, I was reluctant to download cm7 beside I hate using odin for anything cause my computers don't recognise cept my sister lappy. -.- but now if I get bored or wanna switch there's always this
Sent from my SPH-D700 using xda premium

If I advanced restore data AND system from a nand made from legendary would that be like essentially having my legendary rom setup on mtd (sans bml kernel of course). And then i could make a nand of that and restore to it whenever I wanted?
Sent from my SPH-D700 using Tapatalk

stilesja said:
If I advanced restore data AND system from a nand made from legendary would that be like essentially having my legendary rom setup on mtd (sans bml kernel of course). And then i could make a nand of that and restore to it whenever I wanted?
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Essentially yes, on CWM 5 on BML backups are labeled as system.ext4.tar as an example. You can make a backup, and then edit system.ext4.tar to system.yaffs2.tar and change the name for each individual file in the md5 to yaffs2.tar and you should be able to advance restore those files.
Also, as always. lol

AproSamurai said:
Essentially yes, on CWM 5 on BML backups are labeled as system.ext4.tar as an example. You can make a backup, and then edit system.ext4.tar to system.yaffs2.tar and change the name for each individual file in the md5 to yaffs2.tar and you should be able to advance restore those files.
Also, as always. lol
Click to expand...
Click to collapse
Apro loves his memory
/temporary sig

AproSamurai said:
Essentially yes, on CWM 5 on BML backups are labeled as system.ext4.tar as an example. You can make a backup, and then edit system.ext4.tar to system.yaffs2.tar and change the name for each individual file in the md5 to yaffs2.tar and you should be able to advance restore those files.
Also, as always. lol
Click to expand...
Click to collapse
Whaaat? Yes! This made me so happy cause I use my own custom rom and wouldn't want to change anything. So you would just advanced restore system and data after converting the filenames for them correct?
Sent from my SPH-D700 using Tapatalk

Zeinzu said:
Whaaat? Yes! This made me so happy cause I use my own custom rom and wouldn't want to change anything. So you would just advanced restore system and data after converting the filenames for them correct?
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Theoretically yes, as long as everything is changed properly you should be good. lol

Woo!!!! Now no one will have to worry about switching to MTD since everyone will be on it soon!
Sent from my Galaxy Tab 10.1

Thanks for this. It'll be a nice stopgap until CM7 has full video capabilities and permanent solution to PRL updates, switching usb modes, etc.

Is there kernel source somewhere? I'm a computer science student / Linux nut so I would really like to look at that to see if I can understand how this boots or maybe try my hand at some overclocking.
Also, thanks for this. I'm amazed at how quickly development has been moving around here lately.
Sent from my SPH-D700 using xda premium

How about themes

Wow! And they said it would be almost impossible for TW ROMs! Thanks for opening the door!

dangambino said:
How about themes
Click to expand...
Click to collapse
I THINK they should be fine. Along with roms that don't include a kernel
sent from my always aosp epic

K. Cool. Gonna try a ei22 theme on this build later

[GSM Only] CM10 port for Photon Q

This is a CM10 (Jelly Bean, Android 4.1.2) firmware for Photon Q, and at this state only for those who made the SIM card mod and using it on GSM. It's not a official CyanogenMod, not supported by the CM team.
CDMA is being worked on by interloper and arrrghhh.
Credits: CM10 port for Photon Q is made by Skrilax_CZ and nadlabak. Futher credits go to epinter for RAZR HD port - with which this port shares a lot, also collaborated with Hashcode. And of course, CyanogenMod Team.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Installation
The proprietary files come from ASA14 firmware, I recommend you to flash it first before you put CM10 on.
Unlocked bootloader required - you already have no warranty due to the SIM card mod
1) Download the build and gapps.
2) Boot into recovery
3) Backup your firmware + data !!!
4) Flash CM10 (install zip ...)
5) Flash gapps (install zip ...)
6) Wipe data / cache (factory reset)
7) Reboot & Enjoy
To update, just download newer CM10 zip file and install it from recovery.
Working
QWERTY keyboard (with multipress)
Call, SMS, Mobile Data (GSM Only)
Wifi (network scan may take a long time)
Wifi tethering
USB (mass storage mode GUI is not very good)
USB tethering
Camera (front, back)
Video Camera
HW acceleration
GPS / Glonass (long boot time)
Rotation / Sensors
Torch
NFC (untested)
Bluetooth
Not Working
CDMA / LTE
HDMI
Reading contacts from simcard
Other Issues
Shift + arrow keys not working in terminal properly
Sometimes back virtual button has wrong icon as if virtual keyboard was out
SIM PIN cannot be typed on QWERTY keyboard
Changelog
11/04/2013
- fixed A2DP
08/04/2013
- fixed sound in car dock
06/04/2013:
- kernel updated to 3.0.72
04/04/2013:
- GPS working (with long boottime)
01/03/2013:
- added keyboard multipress (default ON)
25/02/2013:
- fixed low speaker volume
22/02/2013:
- fixed crt-off animaion
Download
CM10 is no longer supported. Last build is from 27/04/2013!
Downolad: http://skrilax.droid-developers.org/xt897/cm-10-20130427-NIGHTLY-asanti_c.zip (MD5: 7debc60f189f32aab8f034ff1eb02c90)
Google apps: http://skrilax.droid-developers.org/xt897/gapps-jb-20130214-photonq.zip
Source
Github: https://github.com/SkrilaxCZ
Build steps:
Code:
mkdir cm
cd cm
repo init -u git://github.com/SkrilaxCZ/android.git -b jellybean
repo sync
vendor/cm/get-prebuilts
. build/envsetup.sh && brunch asanti_c
Notes
1) Any QPST / SPC related things should be done on stock firmware.
2) If you want to ged rid of the "unlocked BL logo", download: http://skrilax.droid-developers.org/xt897/stock_logo.zip, unpack it, reboot the phone to fastboot open command line in the folder and type "moto-fastboot flash logo stocklogo_swapped.bin" to get stock boot logo.
3) If there is a filesystem check it will take a while to get past the CM bootanimation

Thank you, this is great! I will try this ROM. When do you think GPS and Bluetooth work?

Fantastic, thanks.
Do you think GPS can be made to work?
Best
Tony

abbie7 said:
Thank you, this is great! I will try this ROM. When do you think GPS and Bluetooth work?
Click to expand...
Click to collapse
antonyfirst said:
Fantastic, thanks.
Do you think GPS can be made to work?
Best
Tony
Click to expand...
Click to collapse
Wow guys, maybe let it go through a few revisions first? lol.
Good work Skrilax_CZ - was hoping you would post an official thread soon .

Good work, finally seeing some CM!
Can't wait for CDMA.
Sent from my GT-N8013 using Tapatalk HD

Hahaha! Yup, again Skrillax, well done.
Looks like me and abbie7 had the same timing haha

antonyfirst said:
Fantastic, thanks.
Do you think GPS can be made to work?
Best
Tony
Click to expand...
Click to collapse
I'm pretty sure that if I'll not be able to make GPS work by the time nadlabak has his Photon Q, he will make it work fast as he badly needs it

Where's the super, ultra, ThanksICan'tWaitForCDMASoICanRunThis button?
Sent from my Photon Q

drool.......

So I tried this out just cause, and its great! I noticed though, CDMA sorta works, I've been getting texts just fine, but there's no data.
Sent from my XT897 using xda premium

topherrjames said:
So I tried this out just cause, and its great! I noticed though, CDMA sorta works, I've been getting texts just fine, but there's no data.
Sent from my XT897 using xda premium
Click to expand...
Click to collapse
lol, what about phone calls?

Sadly no, for outgoing calls an error message pops up saying com.android.phone has stopped, but if you don't press ok the phone you were calling will keep ringing. Incoming calls won't even connect at all.
Sent from my XT897 using xda premium

omg i want this so bad. is this CM 10.1?
can we get an option to mount the external sd card as /sdcard?

topherrjames said:
Sadly no, for outgoing calls an error message pops up saying com.android.phone has stopped, but if you don't press ok the phone you were calling will keep ringing. Incoming calls won't even connect at all.
Sent from my XT897 using xda premium
Click to expand...
Click to collapse
Yea, I'm trying to figure out why... I was really hoping it was a simple build.prop thing, but it seems to be deeper than that....
If anyone has any ideas, please let me know! I've build this thing from source many times now and I was able to get 1xRTT data... but I never got phone calls to function properly. com.android.phone keeps imploding...
wintrxtrem said:
omg i want this so bad. is this CM 10.1?
can we get an option to mount the external sd card as /sdcard?
Click to expand...
Click to collapse
CM10. 10.1 has cam issues on similar moto hardware, so Skrilax_CZ went with CM10...
As for an option to mount the external SD card as /sdcard, I assume you could just "do this" - I don't see why the option needs to be provided? Also, what would you do with the "internal" SD? Odd request.

An external card option was added to CM for the original photon, so I was hoping the same could be done for the Q. See screenshot.
Sent from my MB855 using Tapatalk 2

wintrxtrem said:
An external card option was added to CM for the original photon, so I was hoping the same could be done for the Q. See screenshot.
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
If it's a part of CM, then I don't see why it wouldn't be available. Did you look and see it wasn't available...?
Does this option "combine" the external SD and internal SD? Interesting if so, wondering how it achieves this. The whole internal/external SD thing seems kind of half-baked to be honest.

By default a lot of apps use /sdsard so if you want to use your own external sdcard or bring it over from an old phone this option allows you to mount it as /sdcard instead of Moto's internal card.
I haven't flashed the ROM yet because I'm a CDMA guy, so I don't know if it's built in to CM.

wintrxtrem said:
An external card option was added to CM for the original photon, so I was hoping the same could be done for the Q. See screenshot.
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
It's not in the CM itself, this is part of the device specific settings. I haven't made it yet (for things like multipress, i.e in CZ press 'o' twice fast and it will write 'ó' etc.). Anyway, right, it's not difficult to do at all and I like that option too.
As for CM10.1, it's likely we'll be doing it together with RAZR HD / RAZR M guys, however, there are some things that need to be fixed in their sources to make it work on our phone (such as display driver; this will take some time). And also Camera isn't working on it, as it was rewritten in 4.2 - will also take time. So I picked CM10 first, to know the differences between this phone and the other QC phones from Moto and so we have something that works (when the GPS / CDMA gets fixed).

I've also pinpointed other issues while testing it. It appears suspend / resume is sometimes not working properly (extremely poor battery life may occur) - which sucks hard. Compared to stock ROM, audio speaker is too low too.

1) Any QPST / SPC related things should be done on stock firmware.
Click to expand...
Click to collapse
tell me more Please

[ROM] Provision JB | Make your Smart Life With Us | 4.1.2 | Final Build Released!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This project is one that I've been blowing off for about 3 weeks. It is a port from the One V found here. It was originally Designed and Developed by Provision Team.http://provisionmod.com
I used CM10 as my base for this.Remember this is a work in progress, so things my be broken on some varients, if so post it here.​
Features:
Choice of Apex or Trebuchet launchers. (I prefer Apex)
- A slightly different design of the lock screen
- New forms of notification (no notification) panel
- Readily available banks - superuser app integrated into the Settings App, App
- Very easy to set in the routing can be toggled
- Extended Desktop mode Support
- Center Clock, stopwatch display
- Multi-tasking button to delete all set to application / window
- Navigation bar / status bar color adjustments and watch the color
adjustments and a variety of customization options
- Custom carrier terms
- Self-performance optimization
- Font setting feature added
- Adjustable font size
- The status bar on the day of the week display
- Notifications panel to switch tabs when sliding animation
What works:
Everything from CM10!!!
Issues:
- Camera Apk not working properly( 3rd party camera apps work fine)
- GPS buugy, works on some phones
- Statusbar pulldown buggy, wont pulldown sometimes
-You Tell Me!!!
Disclaimer - Flash at your own risk!
Code:
* Your warranty is now void.
* This is a Dev Port, not a fully stable rom. Please, for developers/ testers only!!!
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Instructions:
Make a backup!!!
Put the file on SD card.
Reboot to recovery.
Wipe Data/cache (Optional, but for best results)
Flash Provision Rom
Flash Gapps
Reboot and enjoy.
Sneak Peak!!!​
Downloads:
Provision Rom Stable - Build 2(Final)
Gapps - Official Gapps - Basic Gapps - Ultra Slim Gapps
A2SD - Direct Download (DO NOT FLASH UNLESS YOU HAVE AN SD-EXT PARTITION)
A2SD INSTRUCTIONS:
1. Get a properly formatted sd-ext partition. (Do not move on until you have done this.)
2. Reboot into recovery
3. Wipe dalvik cache and cache 3x
3. Go into Mounts & Storage
4. Mount cache, data, sd-ext, sdcard and system
5. Flash dtapps2sd-2.7.5.2-1-signed.zip
6. Reboot
7. After reboot, go into terminal
8. Type-> su -> hit enter->hit "allow" when SuperSU prompts you
9. Type-> a2sd reinstall-> hit enter
10. Wait until it reboots. If this doesn't work, start over at step 1 and do it again.
11. To make sure it worked, go into Titanium Backup. If there is an a2sd partition at the bottom it worked.
Credits:
Thanks to sk8erboy for bringing Provision to the HTC One V and Perms.
Thanks to kevsthabest for all of his work for the DesireHD and and CM10
Thanks to the Provision team for their awesome work.
Thanks to -SmOgER for being a big help with this rom and testing non stop.
Thanks to Seraz007 for his mods toward the Provision Rom
I'd also like to say a special thank you to the HTC Desire HD community for helping me test this rom
Thanks!

Changelog:
Code:
[B][U]Stable Build Final(09/06/13)[/U][/B]
- Added correct Notification,ringtone,etc.
- Fixed build.prop errors
- Fixed Weather Functions
- Fixed close screen reboot and wlan share
- Statusbar header (clock, date, weather) is smaller than the original.
- Optimized the layout of the controls (margins, positions, alignments).
- Switched "notifications" and "toggles" buttons with each other, so the "swipe all" button is next to the "notifications" button.
- Removed "NOT CHARGING" label from the battery status.
- Memory and battery icons aligned to left to make it more separated from the switches on the right.
[U][B]Stable build 1(09/05/13)[/B][/U]
- Initial Release
- Rom is now booting up and working!
Post your thoughts about this Rom below​

Not booting. Stuck on boot animation.

Screenshots at least are looking really nice.. :good:
Finally a clean looking AOSP based UI with some new features, and not yet another themed Jellytime/CM10 build.

Awesome isnt it!

can anyone make a logcat

So is this build booting or not?

Yes, I unlocked the bootloader. At the moment I can `t send logkat.

I was excited to try this rom but, when i flashed this one, it doesn't boot
I hope that you will find a solution

Overall, I'm glad that there are people who will not die for our telephone and doing something on this big round of applause for such people
But I have chosen two versions of the build that I thought would work for me, well, disappointed because he did not turn up .. Is the creator can not test the rom on your phone and insert tested dhd? Is the translation is that it does not have such a phone? bravo

logcat isn't working..
Unable to open log device '/dev/log/main': No such file or directory
Click to expand...
Click to collapse

Hamdiz said:
I was excited to try this rom but, when i flashed this one, it doesn't boot
I hope that you will find a solution
Click to expand...
Click to collapse
I have a fix on the way, check for build 3 in a while

-SmOgER said:
logcat isn't working..
Click to expand...
Click to collapse
Okay Try B3

Zpik said:
Okay Try B3
Click to expand...
Click to collapse
I tried the B3, Stuck on boot animation :/

-SmOgER said:
logcat isn't working..
Click to expand...
Click to collapse
Hamdiz said:
I tried the B3, Stuck on boot animation :/
Click to expand...
Click to collapse
sorry guys:laugh: my heads not on right todasy. I have alot of up coming roms and for some reason keep uploading funked ones, like alpha builds. My b, guaranteed working one coming up.

Zpik said:
sorry guys:laugh: my heads not on right todasy. I have alot of up coming roms and for some reason keep uploading funked ones, like alpha builds. My b, guaranteed working one coming up.
Click to expand...
Click to collapse
When is the next update? I can not wait :laugh:

Hamdiz said:
When is the next update? I can not wait :laugh:
Click to expand...
Click to collapse
Like an hour or sooner, finishing it up now:laugh:, but dev-host slow uploud:crying:

Hamdiz said:
When is the next update? I can not wait :laugh:
Click to expand...
Click to collapse
its up boi:laugh:

Zpik said:
its up boi:laugh:
Click to expand...
Click to collapse
yep but doesnt boot:laugh: bricked my phone

LOL!
Sent from my HTC Desire HD using Music Player

[ROM][PORT][CM7.2] JellyBread V5.2

Thread Navigator : #1 - Features,installation guide,downloads.
#2 - Changelog
#3 - Buglist
#4 - Screenshots​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Screen Shots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Features - Gapps Included
BLN Enabled
Integrated Achep ICS layout , modified to JellyBean Layout
Themed the whole framework-res.apk, SystemUI.apk, and all system apps. No theme.apk
Jelly Bean style statusbar expanded
Settings shortcut on statusbar expanded
Wifi and Bluetooth Switch on Settings
ICS/JB Task Swithcer Style
Nexus 4 (Android 4.2) Analog Clock Style
ICS/JB Style Settings
Jelly Bean transition animation (super smooth)
Included Universall Megabass Audioboost
Full Roboto font
Ads free, hacked host
Effiecient RAM consumption
Overall smooth and fast​
Installation Guide :
*First flash bieltv.3's CM7 kernel (If you're on stock rom)
*If you're on any CM7 rom based on percy's CM7,please don't flash this rom.First flash the bieltv.3's kernel and then flash this rom.
1.Download the rom given below.
2.Place it in the root of your sd card.
3.Go to CWM and under mounts and storage,format system,data and cache.
4.Go back and wipe data and cache.
5.Again go to mounts and storage and mount system,data,cache and sd card.Mount the system 2nd time also.
6.Flash the rom
7.Wipe data and reboot.​
Downloads (#1) - https://www.mediafire.com/?87f6eqghala1zr8 ​
Original Thread - http://forum.xda-developers.com/showthread.php?t=1991020​

Changelog - #1 - Initial Build
Dev's Changelog - Added slider brightness on statusbar expanded (swipe the date to left)
New PNG's file
New Framework.jar
New Home Screen
Fixed Wifi and Bluetooth switch when landscape mode
New Settings Layout
Calculator with swicth theme-able to dark or light theme
kitkat dialer style
Advance clock settings by potato
Kitkat easter egg
New file manager
Google search like a google now
Kitkat wallpaper and Lollypop wallpaper
New Bootanimation
Backup ROM from TERMINAL EMULATOR
Pie Control use LMT launcher (you can find in buttons setting)
Disable or enable backlight (you can find in buttons setting)
Double tap status bar to sleep

Buglist - Same as RC4 by bieltv.3

Haha u still porting keep up
Sent from my Nexus 5 using XDA Premium 4 mobile app

Mya SeR said:
Haha u still porting keep up
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah a user requested me to port it.

good post bro..bro

good job @op nice port

Thanks #aniket

I'll try it .... its ports are incredible .... thanks ..
Sorry for my bad English

Getting Bootloops
I am on stock Rom, i followed the process as explained by Bieltv.3 CM7 but still getting bootloop.
INSTALL PROCESS
-power off the phone
-reboot it in recovery mode by holding home button+ power button+volume up button
-select apply update from sd card and flash cwm
-select install zip
-choose zip
-cyanogenmod#2_modded.zip
-advanced
-reboot recovery
-wipe data,wipe cache
-advanced then wipe dalvik cache and wipe battery stats
-mount and storage then mount system data and cache
-install zip
-choose zip
-JellyBread
Mount and storage:mount system
reflash cyanogenmod#2_modded
Reboot System
Please help me

thepain20 said:
I am on stock Rom, i followed the process as explained by Bieltv.3 CM7 but still getting bootloop.
INSTALL PROCESS
-power off the phone
-reboot it in recovery mode by holding home button+ power button+volume up button
-select apply update from sd card and flash cwm
-select install zip
-choose zip
-cyanogenmod#2_modded.zip
-advanced
-reboot recovery
-wipe data,wipe cache
-advanced then wipe dalvik cache and wipe battery stats
-mount and storage then mount system data and cache
-install zip
-choose zip
-JellyBread
Mount and storage:mount system
reflash cyanogenmod#2_modded
Reboot System
Please help me
Click to expand...
Click to collapse
u have to install biel's kernel bro ...its based on it

Looks pretty good. Will try it soon.

Omar El- Hussien said:
u have to install biel's kernel bro ...its based on it
Click to expand...
Click to collapse
I guess cyanogenmod#2_modded.zip is the kernel anyways can you guide me how to flash biel's kernel on stock rom rooted.
I am using CMW by madteam

thepain20 said:
I guess cyanogenmod#2_modded.zip is the kernel anyways can you guide me how to flash biel's kernel on stock rom rooted.
I am using CMW by madteam
Click to expand...
Click to collapse
I think u must know how to use cwm...
Download the kernel(must thank bieltv. 3)..go 2 cwm... and flash it(dont forget to mount everything!)... Reboot recovery.. (everything becomes blue) then flash the rom using the procedure...
Link(kernel) =>> http://www.mediafire.com/download/lzw3ddt9dtd9tw3/kernel_CM7_v4.0_totoro.zip
Orginal thread for kernel==>> http://forum.xda-developers.com/showthread.php?t=2673603

unkown rockstar said:
I think u must know how to use cwm...
Download the kernel(must thank bieltv. 3)..go 2 cwm... and flash it(dont forget to mount everything!)... Reboot recovery.. (everything becomes blue) then flash the rom using the procedure...
Link(kernel) =>> http://www.mediafire.com/download/lzw3ddt9dtd9tw3/kernel_CM7_v4.0_totoro.zip
Orginal thread for kernel==>> http://forum.xda-developers.com/showthread.php?t=2673603
Click to expand...
Click to collapse
Thanks for helping me, the problem was with Kernel.
Now the Rom is working fine only one problem though when the phone starts after flashing the rom the pie control pops up every time when I touch the screen and it will not allow you to click next option at initial phone setup. when I went to setting to disable the pie control i getting FC.

Another Big Problem, after every reboot the phone data gets wiped like factory reset.
Everything is deleted contact, sms, applications setting etc.

thepain20 said:
Another Big Problem, after every reboot the phone data gets wiped like factory reset.
Everything is deleted contact, sms, applications setting etc.
Click to expand...
Click to collapse
thepain20 said:
Thanks for helping me, the problem was with Kernel.
Now the Rom is working fine only one problem though when the phone starts after flashing the rom the pie control pops up every time when I touch the screen and it will not allow you to click next option at initial phone setup. when I went to setting to disable the pie control i getting FC.
Click to expand...
Click to collapse
FC the pie controls twice it wll stop till next reboot
now install link2sd and uninstall it

@op Instead of copy pasting ss from original thread, use ss taken on sgy. That way we will be able to have a better idea that how this rom is going to look on our device.

y model is gt-s5660?? isn't it for gt-5360???

Sarfu4ndroid said:
y model is gt-s5660?? isn't it for gt-5360???
Click to expand...
Click to collapse
The screenshots posted over here are copied from original thread. But when you'll flash the rom the model will be gt-s5360

[ROM][PORT][10.0] Masik P Port [MIUI 12][WHYRED][2020/09/03]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MASIK P WHYRED PORT​Masik is a Russian MIUI based ROM which aims in giving best performance and smoothness for your device with less customisations to customise your xiaomi device and comes with a inbuilt adblocker.
Masik is one of the Custom MIUI ROMs based on China Beta ROM.
There are two variants of Masik ROMs:-​Masik X - Beta version of Masik aiming at testing new and unstable features.​Masik P - Stable version of Masik aiming at Best performance, smoothness and stability.​
PORTTEAM DESCRIPTION​This Masik ROM is Ported from both Lavender and Ginkgo​(kindly read the changelogs to understand why it is ported from different devices)
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
CHANGELOGS​(Kindly Read the below Changelogs before proceeding to download)​
Code:
Masik ™ Premium
Updated: Aug 30, 2020
System: MIUI 12, Android 10
CHANGELOGS:
- Updated applications: "Camera", "Gallery", "Desktop", "Messages", "Control Center", "Calculator", "Health", "Ribbon of widgets", "Security"
- Added regional parameters to determine the geolocation of subscribers + extended database of phone codes
- Updated media content (wallpapers, bootanimation, sounds)
- Updated widgets + added new ones
- Reduced font size in some system applications
- Added "Long exposure" option to the "Camera" application
- Added additional options to change the call window for devices in which options were missing before
- Fixed size of desktop shortcuts and indents between shortcuts in open folders
- Fixed the work of some Google applications, assigned permissions for accessing Google services to MIUI functions
- Updated audio engine Masik Pulse 4.0
- Updated translation for some system applications (Russian, Ukrainian, Belarusian, Turkish)
- Fixed vibration response when unlocking the device with a fingerprint
- Hardware used acceleration for system applications
- Optimization of the system for better performance
- Expanded list of unwanted sites to block
- Updated APN and SPN parameters
- Much more
PORT CHANGELOGS:
- MIUI 11 CAM ONLY
- Don't report that ROM is laggy if you use super walls (Always use static walls for smoother experience)
LAVENDER PORT CHANGELOGS:
- Fixed device watermark can be turned on now
- Fixed back Cam Portrait
- Fixed Colour Scheme
- Reading mode improved
- Added Predator Kernel as Stock
- Use Magisk 20.3 to pass safetynet
- If you are using Magisk 20.3 or 20.4 hide magisk manager for some banking apps to work
- Safetynet passed by hiding Magisk 20.4
GINKGO PORT CHANGELOGS:
- TO FIX STATUS BAR HEIGHT TURN ON NOTCH KILLER OPTION or DOUBLE DISPLAY CUTOUT OPTION VIA DISPLAY CUTOUT IN DEVELOPER SETTINGS
- Equalizer not working (it will be fixed soon)
- More smoothness than Lavender port (if you don't use super walls)
- Added Extended EAS v50 Kernel as Stock
- Use Magisk 20.3 to pass safetynet
- If you are using Magisk 20.3 or 20.4 hide magisk manager for some banking apps to work
- Safetynet passed by hiding Magisk 20.4
- Thanks to @boeloekzz for base vendor of Ginkgo
—-Thanks to @FatymElita—-
DOWNLOAD​Click on this link to proceed to the download page​
DONATE​Donate to the Main Developer (Stas) who made this ROM possible​PayPal​Yandex​
CREDITS​
Code:
@electrojack
@boeloekzz
@EdwardROCKS
@AbhiXShakya
@FatymElita
@NAHSEEZ
@minte03
@Pritishsingh07
@nosshormanus
@THANOS_is_here
MY TESTERS TEAM
MIUI Port Hub Family
And all members whyred
STAY TUNED​Our Telegram Channel​Bugs and Discussions​
Android OS version: 10.0
Security patch level: September 2020
Maintainer/Ported by: xtarotcards
ROM Developer: Stas
Credits for Porttool: JamFlux

Support f2fs?

The FM radio have sound? thanks

ZidaneNaufal said:
Support f2fs?
Click to expand...
Click to collapse
Yes

Provide some screenshots for the rom

testing since yesterday evening... but, so far less bugs than ionOS
Dev said that we shouldn't report that ROM is laggy if you use super walls .... but man... extremly laggy.
im using static wallpaper, all good, but is there any reason for that?

napsterr said:
testing since yesterday evening... but, so far less bugs than ionOS
Dev said that we shouldn't report that ROM is laggy if you use super walls .... but man... extremly laggy.
im using static wallpaper, all good, but is there any reason for that?
Click to expand...
Click to collapse
Could you tell me if the FM radio works fine and have sound? Thanks

wiliplasen said:
Could you tell me if the FM radio works fine and have sound? Thanks
Click to expand...
Click to collapse
Nope... Doesn't work, No sound

https://ibb.co/qjnYkrn
https://ibb.co/sJsVSQ1
https://ibb.co/DDwQMdS
https://ibb.co/k8V58Mc
I can't list app by installed time, it list by apps name.
Network speed shows in notification, not in status bar.
I need to pull down notification to see network speed.
If I rotate to landscape, network speed shows up.
Long screenshot doesn't work.
Anything ok, thx.
Cell phone signal is very strong.
Uh...Miracast aka Wifi display doesn't work.
O M G.

how can i install magisk on that rom?
i get a bootloop when i flash magist 20.3 or 20.4
need to hide root for some apps

napsterr said:
how can i install magisk on that rom?
i get a bootloop when i flash magist 20.3 or 20.4
need to hide root for some apps
Click to expand...
Click to collapse
Just flash magisk 20.4 recovery package via recovery then wipe cache&dalvik

dfight said:
Just flash magisk 20.4 recovery package via recovery then wipe cache&dalvik
Click to expand...
Click to collapse
This Rom has Root already ?

What is wrong with this rom?
Clean install but cannot boot it as it ask me for password!!! I input corect password but it says "Incorrect Password" over and over again...
Moreover, this install encrypted my data partition and cannot access it anymore, that is the reason I cannot boot into OS!!!
Recovery also is trying to decrypt but IT DOES NOT RECOGNIZE MY PASSWORD!!!

MadK9 said:
What is wrong with this rom?
Clean install but cannot boot it as it ask me for password!!! I input corect password but it says "Incorrect Password" over and over again...
Moreover, this install encrypted my data partition and cannot access it anymore, that is the reason I cannot boot into OS!!!
Recovery also is trying to decrypt but IT DOES NOT RECOGNIZE MY PASSWORD!!!
Click to expand...
Click to collapse
Have u tried format data?

Sidgup1998 said:
Have u tried format data?
Click to expand...
Click to collapse
God Almighty!!!
Yes, but trying all the passwords that came to mind lead to a reset and WIPE MY DEVICE CLEAN!!! AND I TRIED TO AVOID THAT!!! I had about 5 tries left but the wiping process went on and lost ALL MY INTERNAL STORAGE!!!
I'm so MAD and frustrated right now!!!!

MadK9 said:
God Almighty!!!
Yes, but trying all the passwords that came to mind lead to a reset and WIPE MY DEVICE CLEAN!!! AND I TRIED TO AVOID THAT!!! I had about 5 tries left but the wiping process went on and lost ALL MY INTERNAL STORAGE!!!
I'm so MAD and frustrated right now!!!!
Click to expand...
Click to collapse
You should always format data and you will always lost everything that on the phone that's why you should make backup it's nothing new.

openbzh said:
You should always format data and you will always lost everything that on the phone that's why you should make backup it's nothing new.
Click to expand...
Click to collapse
Well, I know the importance of back-up but I tried a few roms in order to discover which one is suitable for use and DID NOT FORMAT INTERNAL STORAGE OR LOOSE ANY DATA UNTIL THIS ROM... it encrypted my data partition and did not recognized any of my password used for this device!!! So, Google wiped my internal storage for this matter!!! I formatted data partition only to regain control of my device and run away as possible from this rom!!!

MadK9 said:
Well, I know the importance of back-up but I tried a few roms in order to discover which one is suitable for use and DID NOT FORMAT INTERNAL STORAGE OR LOOSE ANY DATA UNTIL THIS ROM... it encrypted my data partition and did not recognized any of my password used for this device!!! So, Google wiped my internal storage for this matter!!! I formatted data partition only to regain control of my device and run away as possible from this rom!!!
Click to expand...
Click to collapse
Thats because, Not all custom ROM supports encryption..
You dont have to format the data if custom rom supports encryption or else you have to format the data to boot the ROM

Is this development dead?