[CWM][Recovery] Geeksphone Peak - Miscellaneous Android Development

ClockworkMod-based recovery for Geeksphone peak! This recovery will allow you to backup your system along with userdata and restore at any time in the future. This will also help you to install ROMs right from your device, my subsequent Android / Firefox OS ROM builds for Geeksphone Peak can be flashed with these recoveries.
Cheers! Check the Downloads tab above to download the recoveries.
Installation
Make sure you have ADB and Fastboot installed. Reboot into fastboot mode.
Code:
adb reboot bootloader
Then move into the directory you saved the recovery image in and run this command from a Terminal / Command Prompt.
Code:
fastboot flash recovery cwm-*****.img
XDA:DevDB Information
ClockworkMod Recovery for Geeksphone Peak, Tool/Utility for the Android General
Contributors
tuxboy
Version Information
Status: Beta
Created 2014-10-06
Last Updated 2014-10-06

Hi Tuxboy, I'm looking for a Jellly Bean rom for my Peak, KitKat would be awesome. Are you developing one?
Thank you

Related

[APP][RECOVERY][ROOT]Recoveries and Recovery Installer for Taoshan

Recovery Installation on Sony Xperia L is now just a matter few taps.
This thread is all about Recovery installation in device's FOTAKernel partition.
Why FOTAKernel ?
Because it over-rides kernel from boot partition and it does not change when switching ROMs.
It will go back to Stock FOTAKernel if flashed stock though.
Maintainers
App Maintainer - Me, I will be bringing app updates so as to make your lives easier and beatiful.
Recovery Maintainer - @SdtBarbarossa, he will be updating various recoveries, which can be downloaded and installed right from the app. More of demonstration of his work in 2nd post.
Recoveries Supported
TeamWin Recovery Project (TWRP)
CWM-Philz Touch Recovery
Cannibal Open Touch Recovery
Cyanogen Recovery
Stock FOTAKernel
Utilities Supported
Aroma File Manager
App Usage
Open the app
Grant Root Access
Let the app get latest info from Recovery Miantainer's database. Choose any Recovery and download it, you need internet for that I guess.
App will start downloading recovery for ya, and will automagically install the recovery and reboot to recovery, for ya.
In case of aroma, as soon as download is finished, it will reboot to recovery and will automatically open (or prompt to open, depending on recovery) aroma fm.
Easy heh?
Download - https://www.androidfilehost.com/?fid=24052804347802379
XDA:DevDB Information
Recoveries and Recovery Installer for Taoshan, Tool/Utility for the Sony Xperia L
Contributors
corphish, SdtBarbarossa
Version Information
Status: Beta
Current Beta Version: 1.0
Created 2015-08-27
Last Updated 2015-08-27

Android One ToolKit, Unlocks/Relocks and Install Custom Recovery

Android One ToolKit
This Program will help you to Unlock/Relock your phone and then Install latest TWRP 2.8.6.0 in your phone. :laugh:
If you want to Unlock your device and Install Custom Recovery
1. Open .EXE file and then install it
2.Open Android One Toolkit.bat follow the Instructions and Make Your phone ready
If you Want to Lock/Relock your phone run lock.bat
1.Open the installed folder and run Lock.bat
2.Follow the Instruction to Unlock your phone safely
Download the file and enjoy this is still in Testing Stage so if any bugs or any errors occurred pls report
In next version there will be a file to install root access in your phone
Download File Link
https://www.androidfilehost.com/?fid=24369303960685956
This Software is still is testing mode so any bugs pls report.
Whats Working:
Everything
Whats Not Working:
You should say
XDA:DevDB Information
Android One ToolKit , Tool/Utility for the Android General
Contributors
MICKEY_ANDRO100
Version Information
Status: Testing
Current Stable Version: v1.0.0
Created 2016-01-16
Last Updated 2016-01-15

[RECOVERY][TWRP] TWRP 2.8.7.0 Galaxy Trend Lite Duos GT-S7392L

Hello every Galaxy Trend Lite Duos users i have compiled Twrp 2.8.7.0 ! ​
This twrp is compiled by omni 6.0 branch and this is amazing twrp i ever used and can't find any twrp better then this one yet and i think so every trend(GT-S7392L) user should try this recovery on there device
Install instructions :-
1. Download recovery.zip
2. Flash it from old cwm or old twrp
OR​1. Download recovery.tar.md5 and flash it from odin
OR​
1. Install terminal emulator from play store.
2. Download recovery.img file
3. Open terminal emulator and type su and give root permission .
4. Then type dd if=recovery.img of=/dev/block/mmcblk0p6
5. Now you have installed recovery successfully enjoy!
Screenshots:-​
http://forum.xda-developers.com/devdb/project/?id=13289#screenshots
Contributors
@zim555 for device tree
@Neo Because of him i am on xda thanks
@mac12m99
@tra_dax
@DigiGoon for his compressed sources
Source Code: https://github.com/Grace5921/android_device_kyleve
Version Information
TWRP Version: 2.8.7.0
TWRP Kernel: Linux 3.4.x
Based On: Omni
Status: Stable

[RECOVERY] TWRP 3.0.3 For Micromax Unite 2

TWRP 3.0.3 Recovery Project​Disclaimer
Disclaimer
#include
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
ChangeLog For 3.0.3
Fixed issue with ext4 (Formatting in ext4 no longer takes a life.)
build ramdisk on LZMA
Builded DT on lz4c
Improve backup display names with emulated storage
Fix crash during check for TWRP app
Fill uid/gid for screenshots at compile time
Allow custom bootloader msg offset in block misc
ScreenShots
Click Here
Installation Instructions:silly:
By PC
What’s required:
USB Cable / PC
SP Flash Tool or MTK Flash Tool
ADB VCOM Drivers (normally I use PDAnet)
Scatter file for your phone
recovery.img
Click to expand...
Click to collapse
What to do:
Download and install the drivers
Download, extract and run SP Flash Tool
Click scatter loading on right side of SP Flash Tool and direct SPFT to where your scatter file is
Uncheck everything except for recovery
In the list of images in SPFT, click the recovery line and direct it to where your TWRP is saved
Click download at the top of SPFT
You’ll see a warning pop up letting you know that not all items are selected. Just click okay.
Remove the battery from your phone for a second and replace
Attach phone to PC via USB – At this point in the bottom of SPFT, you will see the preloader communicating with the PC. The bar at the bottom of SPFT may flash a couple of different colors, then you’ll see a green circle indicating it’s finished successfully.
Detach the phone
Boot into recovery by holding volUp + volDown+power and then hold volUP to boot into recovery
By Mobile
Download the recovery in phone or move it to phone.
Download Flashify (mobile uncle tool should work too, rename the TWRP.img to recovery.img and place it in sdcard root)
Open flashify and follow the screenshots.
Go To Flash Tap And Select Recovery Image
Select - Choose a file , Download the recovery.img and select this recovery from your dir
Tap on Yes and after successful recovery flash , reboot and enjoy
By Custom Recovery (CTR OR TWRP or CWM)
Download Recovery Flashable TWRP from the given link ... Flash It and then reboot to recovery
Bugs :- The Recovery Is Inverted As Our device Is Inverted ... Will be fixed soon
Download Links (Choose Carefully)
TWRP 3.0.3 - SP TOOL FLASHABLE AND FLASHIFY : Click Here - (9mb)
TWRP 3.0.3 - CUSTOM RECOVERY FLASHABLE : Click Here
Credits
Allah SWT
Vojtěch Hejsek for build from source
TeamWin
Dees Troy
Omni
LPAD
AMD Families
You & Me
HIT THANKS IT WLL NOT COST YOU !!!
XDA:DevDB Information
TWRP 3.0.3 For Micromax Unite 2, Tool/Utility for the Micromax A106 Unite 2
Contributors
manjot.gni, charansai, Ayush Rathore, Teamwin
Source Code: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Version Information
Status: Stable
Current Stable Version: 3.0.3
Stable Release Date: 2017-02-23
Created 2017-02-26
Last Updated 2017-02-26
Will this work to flash resurrection remix MM?
---------- Post added at 01:13 PM ---------- Previous post was at 12:50 PM ----------
its not flashing through flashify it gives error and yes i have rooted stock rom
---------- Post added at 01:22 PM ---------- Previous post was at 01:13 PM ----------
not flashing through mobile uncle tools also
Hey bro send me a link
Peter pan7034779691]I am kinda new to xda.... And therefore I don't know much about modding android.... But I have flashed many ROMs in my device (MMX u3) and also in some huawei devices ... ....
I have noticed that MMX u2 has many ROMs... Whereas its successor, MMX u3 don't have much.. . so. Can u plz guide me to port resurrection remix 5.6.7 for using in my micromax unite 3
THANKS IN ADVANCE
manjot.gni said:
TWRP 3.0.3 Recovery Project​Disclaimer
ChangeLog For 3.0.3
Fixed issue with ext4 (Formatting in ext4 no longer takes a life.)
build ramdisk on LZMA
Builded DT on lz4c
Improve backup display names with emulated storage
Fix crash during check for TWRP app
Fill uid/gid for screenshots at compile time
Allow custom bootloader msg offset in block misc
ScreenShots
Click Here
Installation Instructions:silly:
By PC
What’s required:
What to do:
Download and install the drivers
Download, extract and run SP Flash Tool
Click scatter loading on right side of SP Flash Tool and direct SPFT to where your scatter file is
Uncheck everything except for recovery
In the list of images in SPFT, click the recovery line and direct it to where your TWRP is saved
Click download at the top of SPFT
You’ll see a warning pop up letting you know that not all items are selected. Just click okay.
Remove the battery from your phone for a second and replace
Attach phone to PC via USB – At this point in the bottom of SPFT, you will see the preloader communicating with the PC. The bar at the bottom of SPFT may flash a couple of different colors, then you’ll see a green circle indicating it’s finished successfully.
Detach the phone
Boot into recovery by holding volUp + volDown+power and then hold volUP to boot into recovery
By Mobile
Download the recovery in phone or move it to phone.
Download Flashify (mobile uncle tool should work too, rename the TWRP.img to recovery.img and place it in sdcard root)
Open flashify and follow the screenshots.
Go To Flash Tap And Select Recovery Image
Select - Choose a file , Download the recovery.img and select this recovery from your dir
Tap on Yes and after successful recovery flash , reboot and enjoy
By Custom Recovery (CTR OR TWRP or CWM)
Download Recovery Flashable TWRP from the given link ... Flash It and then reboot to recovery
Bugs :- The Recovery Is Inverted As Our device Is Inverted ... Will be fixed soon
Download Links (Choose Carefully)
TWRP 3.0.3 - SP TOOL FLASHABLE AND FLASHIFY : Click Here - (9mb)
TWRP 3.0.3 - CUSTOM RECOVERY FLASHABLE : Click Here
Credits
Allah SWT
Vojtěch Hejsek for build from source
TeamWin
Dees Troy
Omni
LPAD
AMD Families
You & Me
HIT THANKS IT WLL NOT COST YOU !!!
XDA:DevDB Information
TWRP 3.0.3 For Micromax Unite 2, Tool/Utility for the Micromax A106 Unite 2
Contributors
manjot.gni, charansai, Ayush Rathore, Teamwin
Source Code: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Version Information
Status: Stable
Current Stable Version: 3.0.3
Stable Release Date: 2017-02-23
Created 2017-02-26
Last Updated 2017-02-26
Click to expand...
Click to collapse
I flashed it, but now my screen goes black when I go into recovery mode
Opens original recovery please help !!!

Redmi Go Aosp 9

Follow the instructions
Files required to be download:
Aosp 9:here
build.prop: here
Flash GSI with TWRP use this fix sd card not read in twrp here
reboot to twrp by pressing power + volume up
Perform a factory reset within TWRP. format data
Download and extract system-arm-aonly-gapps-su.img.xz and you will get system-arm-aonly-gapps-su.img
Transfer the system-arm-aonly-gapps-su.img from your PC to your device’s internal storage where TWRP can access it.
Tap on “Install
Change the type from “zip” to “image.
Find and select the system-arm-aonly-gapps-su.img you downloaded.
Choose to flash to the system partition
no need to flash modified vendor
Once that is done, reboot your device.
Fix : performance copy the build.prop to system/
Bugs: google certification (fix here) after registration clear the google apps data (framewrork/services)
XDA:DevDB Information
Aosp 9 Redmi Go, ROM for all devices (see above for details)
Contributors
samsungics1200, phhusson
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Based On: Aosp 9
Version Information
Status: Testing
Current Beta Version: April 16 2019
Created 2019-04-17
Last Updated 2019-06-11
is there any bug?
Fix : performance copy the build.prop : here copy to system/
Click to expand...
Click to collapse
File needs permission to access - is there another link?
Thanks - the file is available for download now.
I have installed the ROM and it works well but do you know if it is possible to disable the forced device encryption?
Also, my SIM2 is not recognised. Any ideas?
Auto booting to fastboot after installing... (installed to redmi go, it is unlocked, followed instruction, tried minimum 3-4 times, tried several variants of 9.0 Pie GSI etc.)
If You installed 9.0 by the instruction above and it successfully started, it means there is some hardware difference between different region redmi go devices. Mine is Global version.
Stock 8.1 GO is installing and starting normally from TWRP. Problem occurs only with the rom from this thread.
I want to switch to 9.0 beacuse stock 8.1 GO have push notification issue. Believe me, I tried everything to fix it, but unsuccessfully...
Waiting for Your help.
Instructions
NOTE: Do not flash the vendor file from the OP, that causes bootloops on my device.
This is what I did - now happily running AOSP 9:
- Restore stock firmware (http://en.miui.com/download-365.html)
- Reboot then perform system update to get latest release
- Reboot to bootloader (fastboot mode)
- Download the GSI image from the OP
- fastboot flash system system-test-20190415-arm-a.img
- Boot to TWRP recovery
- Mount system partition
- Replace /system/build.prop with one from OP
- Reboot
Additionally, if you want to disable encryption:
- Format data partition (You will loose all of your data!)
- Download vendor image file from OP
- Extract default.prop and fstab.qcom
- Mount vendor partition
- Replace extracted files to phone
Update
Hello to my Russian friends who are following this thread from http://4pda.ru/forum/index.php?showtopic=939092&view=findpost&p=84933744
I have attached the files that need to be replaced to this post
hello guys. i have tried both procedures. it gets stuck on "android" logo (booting i guess).
shall i use vendor? shall not use vendor?
"
- Restore stock firmware (http://en.miui.com/download-365.html)
....
- Replace /system/build.prop with one from OP
- Reboot"
now it should boot?
i tried stopping here, and no luck. i tried doing those "additionally.." steps, same lack of luck.
You only need to touch vendor if you want to disable forced encryption.
These instructions worked when I posted them on 4pda:
- Unlock bootloader - there are instructions elsewhere
- Download: http://treble.phh.me/system-test-20190415-arm-a.img (system.img)
- Download TWRP from other thread (trwp.img)
- Download files.zip from my previous post and extract build.prop
- Power off the phone
- Press volume down and power buttons to go to fastboot bootloader
- Connect your phone to your computer via usb cable
- Type in terminal: fastboot flash system system.img
- Wait for process to finish
- Type in terminal: fastboot boot twrp.img
- Phone will reboot to TRWP recovery mode
- Select "Mount" then "System"
- Type in terminal: adb push build.prop /system/
- Type in terminal: adb shell chmod 600 /system/build.prop
- Reboot phone
If you need GApps, grab the latest pico from https://github.com/opengapps/arm/releases - ie https://github.com/opengapps/arm/releases/download/20190507/open_gapps-arm-9.0-pico-20190507.zip - and install from TWRP.
in locks every time in the "Encryption unsuccessful ... RESET PHONE"
/vendor issue
What process did you use? Did you touch the /vendor partition? Does formatting /data from TWRP help?
Restore stock formware (all partitions from fastboot) then follow steps here: post 10
Camera issue
Only issue I spotted on this ROM for now is - Camera quality became worse. Is it a driver or just app level issue?
This is a Project Treble device which means that the drivers remain untouched in the /vendor partition and the new GSI uses them, unlike older ROMs which contained their own drivers. Which version of firmware did you have before installing the GSI? On 4pda it was observed that camera2 api apps was the issue but I have not seen any such problem.
Just updated to the May 2019 build (v113) and all is good - just had to resize the image to fit the partition. I shall keep updating monthly as long as phh keeps making them.
The ROM from the original post is no longer available. If anyone is interested then I can make an updated GSI available.
Note: FM radio is missing
Kyuunex said:
Note: FM radio is missing
Click to expand...
Click to collapse
Indeed, but the developer is on it, follow progress here: Include FM Radio app
I can't find a gsi that will fit my system partition
need the smallest GSI possible for an obscure mt6580 device
EDIT: would love to try the outdated image that's no longer available ANYWHERE

Categories

Resources