Database Info

[2013-02-12][ROM - CyanogenMod 10 - JB 4.1.2 - UNOFFICIAL]

Hey fellas,
I just start to compile a CM10 rom for my own use from the source and I wish to share with you guys.
So far so good, seems everything is working fine.
Instructions..
You probably know.. but just in case..
1. Boot to recovery (MANDATORY A TOUCH RECOVERY - I strongly recommend the RaymanFX's recovery (plenty of useful features): http://forum.xda-developers.com/showthread.php?t=1855686) (Thanks to RaymanFX)
2. Darkside super wipe - Thanks to him!
3. Wipe data/factory reset
4. Flash the rom
5. Reboot
6. Flash the GAPPS - http://goo.im/devs/Formula84/gapps-jb-20121012-4.1.2-JZO54K (Thanks to Formula84)
7. Reboot and have fun
Attention:
1. Do not install any kind of cpu manager, for now, like setCPU. Keep for now the stock frequencies. It can cause SODs and RRs.
2. When using Titanium Backup do not proceed restoration of data. It can be corrupted or even incompatible in some point to new releases. It can cause FCs.
Attention about to post a bug:
1. Before to post a bug, PLEASE, try to reproduce it at least twice.
2. Make sure that is not related to a bad and dirty flash, you can try to wipe cache and dalvik.
3. Be polite, after all, we are doing this for fun and for the pleasure of share, with no benefits at all.
4. You can contribute here with some debug methodology lol
Changelog (?!) (just a short description about what has changed in CM10 Source):
- Usual changes at the CM source. For more details http://review.cyanogenmod.com/#/q/status:merged,n,z (Thanks to krazeecracker)
- More about official CM changelog http://changelog.bbqdroid.org/#tf101cm10/next (Thanks to mobbarley)
- much more to come soon.. (just let me have some time to go through the kernel source code )
ROM
2013-02-12
http://goo.im/devs/erickwill/tf101/cm-10-20130212-UNOFFICIAL-tf101.zip
MD5SUM - dcb4a330156515d5f238fc4ee829033d cm-10-20130212-UNOFFICIAL-tf101.zip
For old releases:
http://goo.im/devs/erickwill/tf101/
ATTENTION
You DON'T need to install any other kernel. Everything works fine, at least in my end
As usual, THANKS everybody involved somehow in CyanogenMod development!
Hope you enjoy as I am enjoying this awesome branch.
PS. As also usual, I don't wanna get in flame with anyone over here. So please, any issue PM and I will, promptly, try to resolve any dispute or simply remove the content. I am posting this for fun and for the pleasure to share something that has been cool for me.
Oh, and please, just note that I am not responsible for bricked devices, dead SD cards and so on.
Have fun!

Guess I'm the only one in the mood to Flash a Rom tonight... So thanks

Mee too !! + 1
---------- Post added at 07:00 AM ---------- Previous post was at 06:43 AM ----------
And to be sure, what gapps are you using? Link please...

Very good.is dock working well and HDMI audio out put work?
Inviato dal mio Nexus S con Tapatalk 2

so I want to know if:
-NTFS R/W is working;
-HDMI A/V is working
-docking is working
-it is speedly
thanks a lot

Does this use my dock lid kernel space patch?

Hi,
Before trying, why all your links are for GS2 ? No risk for the Transformer ?

Caramel said:
Hi,
Before trying, why all your links are for GS2 ? No risk for the Transformer ?
Click to expand...
Click to collapse
We need to email cm team to they refresh/update/add tf101 device manteiners. We dont have one active for us anymore.

Caramel said:
Hi,
Before trying, why all your links are for GS2 ? No risk for the Transformer ?
Click to expand...
Click to collapse
Of course it's safe! I tried myself in my own tf101 otherwise I wouldn't post it here. Please check my signature and you'll read recognized dev okay?

prendomiao said:
so I want to know if:
-NTFS R/W is working;
-HDMI A/V is working
-docking is working
-it is speedly
thanks a lot
Click to expand...
Click to collapse
This is a compilation straight from the source, so as something is released from CM source it's available here, including fixes and other features
Enjoy

so they work?

Ahem..... Is the gapps update for 4.1.2?
Thanks.
Everything just works !! I am using the 4.1.1 gapps.....
Great ROM !

chappatti said:
Ahem..... Is the gapps update for 4.1.2?
Thanks.
Everything just works !! I am using the 4.1.1 gapps.....
Great ROM !
Click to expand...
Click to collapse
I'm using this version here. No problems to report on RaymanFX's Cyanogen 10 ROM. Formula84 always seems to have the latest GAPPS. I've used his previous two versions without issues.

grgmre said:
I'm using this version here. No problems to report on RaymanFX's Cyanogen 10 ROM. Formula84 always seems to have the latest GAPPS. I've used his previous two versions without issues.
Click to expand...
Click to collapse
Thanks, added this gapps at the op

[2012-10-14] [ROM - CyanogenMod 10 - JB 4.1.2 - UNOFFICIAL]
New release available:
ROM
2012-10-14
http://goo.im/devs/erickwill/tf101/cm-10-20121014-UNOFFICIAL-tf101.zip
Have fun!

What are the differences from just downloading the nightlies from get.cm?

st0nedpenguin said:
What are the differences from just downloading the nightlies from get.cm?
Click to expand...
Click to collapse
For now is pretty much the same thing, except by the way how each compiler gonna proceed in each compilation, I mean using different versions of JDK or tool chains..
I will be adding some cherries and my own stuffs pretty soon

[2012-10-14 - Revision 01] [ROM - CyanogenMod 10 - JB 4.1.2 - UNOFFICIAL]
Hey fellas,
Here you go the latest updates from the CM sources
ROM
2012-10-14 - Revision 01
http://goo.im/devs/erickwill/tf101/cm-10-20121014-UNOFFICIAL-tf101.r1.zip
Have fun!

Keeps Rebooting To Recovery
Flashed 4.1.2 with no errors. Everytime I reboot it goes to recovery. The only way I can get into the TF is a cold restart. Any suggestions?

erickwill said:
For now is pretty much the same thing, except by the way how each compiler gonna proceed in each compilation, I mean using different versions of JDK or tool chains..
I will be adding some cherries and my own stuffs pretty soon
Click to expand...
Click to collapse
The problem now with TF101 is to get a stable JB ROM, we have some nice nightly stuff like TeamEOS, JellyBro and RaymanFX CM10, but they're not really daily drivers, we need something like Megatron CM9, stable hi performance and battery saving ROM. And of course, kernel devs are so reaaly needed, since gevor hillness there's lot of ROMs out there but nohi powred kernels.
You said the magic word: cherries! If your way is to make a stable and smooth daily driver ROM count me in.
I have an idea to share/request: the CM10 wifi system is somewhat using an "old" scheme, maybe that could be tuned to "new"scheme, to work with Guevor CM10 kernel for instance.
Hope you continue this work, tf101 needs skilled devs.

[ROM][CM11][grouper] OpenPDroid-patched CyanogenMod 11 builds for Nexus 7 2012 Wi-Fi

Main thread: OpenPDroid patches for CyanogenMod 11
WARNING: OpenPDroid is not compatible with ART for now. disable ART before flashing. enabling ART will cause the device to fail to boot. if you enabled ART and are unable to boot, flash official CyanogenMod temporarily to be able to fix (will cause privacy leaks). or if you have ADB access in android or recovery, you can disable ART by using setprop or editing a file.
these are grouper builds of CyanogenMod 11 patched with OpenPDroid. find them here.
update: releases will now be distributed as overlays to the official CyanogenMod snapshots. first flash the official "M" snapshot corresponding to the OpenPDroid overlay you want to flash, then flash the overlay.
update: device-specific builds are being phased out in favor of the generic overlays. please refer to this post.
note: OpenPDroid does not affect the recovery nor the kernel, you can use whatever you want.
CM11-M6 broke OpenPDroid patches, so i forked OpenPDroid to restore compatibility, fix several bugs and clean up the code. sources are here.
XDA:DevDB Information
CM11-OpenPDroid-Grouper, ROM for the Nexus 7
Contributors
Lanchon
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2014-08-06
Last Updated 2014-10-08

(reserved)

Lanchon said:
(reserved)
Click to expand...
Click to collapse
What that open droid ?and what the different froom cm11 m9 and this is ?
Sent from my Nexus 7 using XDA Free mobile app

leos0000 said:
What that open droid ?and what the different froom cm11 m9 and this is ?
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
something like XPrivacy but doesn't require Xposed, is 'native' and is free.
http://forum.xda-developers.com/showthread.php?t=2098156

Lanchon said:
something like XPrivacy but doesn't require Xposed, is 'native' and is free.
http://forum.xda-developers.com/showthread.php?t=2098156
Click to expand...
Click to collapse
I see in your host post recovery.so i need flash this recovery to cm ?
Sent from my Nexus 7 using XDA Free mobile app

leos0000 said:
I see in your host post recovery.so i need flash this recovery to cm ?
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
not needed, it's just there for completeness. you can use whatever recovery you want.

CM11 M9 snapshot is now available, enjoy!
(this release has been tested on an actual device.)

Downloading now.
Will post, any bugs and a big thanx, after testing

HasH_BrowN said:
Downloading now.
Will post, any bugs and a big thanx, after testing
Click to expand...
Click to collapse
thanks!

Quick question do you have a recommended GApps package? Or do you have replacement( open source app market, besides fdroid)?
---------- Post added at 04:13 AM ---------- Previous post was at 03:27 AM ----------
? ? So far very nice! This things SMMMOOOOTHH!
I haven't added anything as far as apks yet. Just testing everything out. Rotation, from portrait to landscape and back again while loading browser on resource intensive page, was super responsive. And as far as initial boot up after install, WOW - fastest I've seen.
This works very well inside MultiROM Manager. I'm using 3.1.10 M-Kernel a69 dirty. @Lanchon Really looking foward to what updates you have for this. ??

Camera and video are the best quality so far on any N7 ROM, most others are very grainy. I've installed ShowBox v2.3 (movies,shows) and haven't had any freeze ups. TuneIn Radio plays smooth. YouTube through the browser works great also.
Getting ready to stress the system with some apps for the next couple of days.
No complaints yet.☺

HasH_BrowN said:
Quick question do you have a recommended GApps package? Or do you have replacement( open source app market, besides fdroid)?
---------- Post added at 04:13 AM ---------- Previous post was at 03:27 AM ----------
? ? So far very nice! This things SMMMOOOOTHH!
I haven't added anything as far as apks yet. Just testing everything out. Rotation, from portrait to landscape and back again while loading browser on resource intensive page, was super responsive. And as far as initial boot up after install, WOW - fastest I've seen.
This works very well inside MultiROM Manager. I'm using 3.1.10 M-Kernel a69 dirty. @Lanchon Really looking foward to what updates you have for this. ??
Click to expand...
Click to collapse
i dont know about gapps really.
hey thanks for the comments, but im afraid this rom doesnt have any performance improvements over official CM11 M9. in fact, it should be slower due to OPD: it introduces db lookups during many API calls. i suggest you try official M9 unless you are using PDroid Manager.

update: releases will now be distributed as overlays to the official CyanogenMod snapshots. first flash the official "M" snapshot corresponding to the OpenPDroid overlay you want to flash, then flash the overlay. full rom releases are unsupported as of now.

UPDATE: OpenPDroid support for CM11 M10 for all devices has been released!
PLEASE NOTE: device-specific builds are being phased out in favor of the generic overlays. please refer to this post.
enjoy!

UPDATE: OpenPDroid is now compatible with ART!
get the new generic overlays here. enjoy!

UPDATE: CM11 M11 OpenPDroid overlays for all devices released!
THREAD END NOTICE: no further notifications of updates will be posted to this thread.
please subscribe to the device-independent thread instead.
enjoy!

[ROM][5.0.2][20150306][SaberMod][N7100] CM12 Unofficial Build [BETA] need testers!

Welcome to wilson3q's CM12 Unoffical Build!
I don't own a n7100, please help to test.
Disclaimer: I take no responsibility for bad things that happen as a result of flashing this.
All are pretty standard cm12 stuffs, except those patches I applied on top of them.
[Download]
ROM (please don't mirror)
build - 20150306
Gapp:
http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Recommended launcher:
Nova Launcher (really like its JB zoom app animation, hate L slide up animation)
Recommended theme:
Deep Darkness
[Flashing Guide]
1. Reboot to CWM/TWRP recovery
2. Flash ROM zip file
3. Flash Gapps
4. Reboot
* Wipe data first if you come from another rom *
* Newer boot loader, modem and recovery is highly recommended (don't use twrp 2.8.4, use 2.8.1 instead) *
* No other kernel will be supported, use the stock one, for your best experiences too *
[Patches]
My additional patches over cm12 includes:
Enhancements and bug fixes cherry-picked from other ROMs, including Slim LP, Nameless, LiquidSmooth
SaberMod for ROM and kernel
O3, JustArchi optimization
Added Boeffla sound engine 1.67 (Get Boeffla Sound app to enable)
Added CPU governor zzmoove, smartassv2, savagedzen
Video playback forward/backward fix
Removed all kernel debuging stuffs
Fixed keyboard not showing up during setup wizard
Fixed Camera issue
Fixed Day Dream
Fixed Netflix streaming (one more reboot needed after installation of Netflix)
Fixed audio
Enabled Multi-user
LMK minfree tweaks
Misc tweaks
Changed DPI to 280
more...
For better experience, change Nova animation/scroll speed to Fast...
[Known Bugs]
I am not sure what issues you will get, but one thing is for sure: YOUR PHONE WILL FLY!
chrome glitch: type chrome://flags as URL and disable GPU thank @bigmarv31)
Thank cm team for the amazing ROM.
Special thanks to: @DerTeufel1980, @sbrissen, @rogersb11, @TheBr0ken...

Please help to test if baseband issue is fixed or not...
Thanks

Welcome on board mate

Awesome buddy one more flawless rom for our device....gr8 @wilson3q

Great news! I can't wait to try it! Thanks

20150227 build does not boot

mimmo13 said:
20150227 build does not boot
Click to expand...
Click to collapse
Clean install?
Logcat...plz.

wilson3q said:
Clean install?
Logcat...plz.
Click to expand...
Click to collapse
Clean install.... bootloop...

@wilson3q after note 2 logo, i have black screen and after 2/3 mins, the phone reboots.
Sorry , but i'm not able to do a logcat.

wilson3q said:
Clean install?
Logcat...plz.
Click to expand...
Click to collapse
Disable selinux, in kernel and make the trees permissive, refer to nameless git for the same. You kernel is crashing at boot, that's why logcat, dmesg or a kmsg is a no go.
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*

Welcome on board !
Please tell us call recorder could works and loud with this rom !

KNIGHT97 said:
Disable selinux, in kernel and make the trees permissive, refer to nameless git for the same. You kernel is crashing at boot, that's why logcat, dmesg or a kmsg is a no go.
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*
Click to expand...
Click to collapse
Already disabled..
Hard If no Logcat...
Can u try to use another kernel? See if any other issues...
I will look at the kernel again..

I tried with purecm and it seems to boot.
Edit: No Baseband

NisseCool said:
I tried with purecm and it seems to boot.
Edit: No Baseband
Click to expand...
Click to collapse
Ohh then dwnld and flash one from Androidwizzards thread...u will get BB working

Okay

New build up...
Try to see if can boot...

wilson3q said:
New build up...
Try to see if can boot...
Click to expand...
Click to collapse
It does boot.
nvm. It starts rebooting after it gets to setup wizard.

NisseCool said:
It does boot.
nvm. It starts rebooting after it gets to setup wizard.
Click to expand...
Click to collapse
Logcat?

Yannn said:
Welcome on board !
Please tell us call recorder could works and loud with this rom !
Click to expand...
Click to collapse
Not sure...I don't have a device to try.

thanks man! i'm gonna try it!
---------- Post added at 01:12 AM ---------- Previous post was at 01:05 AM ----------
[email protected] said:
Ohh then dwnld and flash one from Androidwizzards thread...u will get BB working
Click to expand...
Click to collapse
I have no baseband too.
Where i can find Androidwizard thread?

[ROM][Nexus 7 2012 Wifi][grouper][Unofficial LineageOS 11.0]

This is an unofficial build for all those who want to stay with CM11. The build is based on the pure CM code and does include the stagefright patches and other patches up to July 30.
It does run perfectly on my own Nexus 7. However, use at your own risk.
https://www.mediafire.com/folder/7ywn971ujxyux5c,gqmwu22jm3q24a2/shared

Works great on multirom

Thank you so much for this. Was looking for this.

New version available:
https://www.mediafire.com/folder/s2mrb38x07a6a6b,44johuqob71w1be/shared
Includes the latest patches, so I strongly encourage everyone to upgrade.

Thanks for the rom. Which version of gapps are you using, and could you supply a link. Thanks

Many thanks for the CM11 build NeuDLi, much appreciated
Wasn't able to find a 5.1 build that wouldn't lag
Was about to pull the trigger on a new tablet but the nexus 7 has had a stay of execution.
I used the nano variant of 4.4 for ARM from the Open Gapps Project.
Cheers, Paul

Which version is this built from, I'm currently using the M12 build?

Can I use it in f2fs partition?
Sent from my Nexus 7 using Tapatalk

NeuDLi said:
New version available:
https://www.mediafire.com/folder/s2mrb38x07a6a6b,44johuqob71w1be/shared
Includes the latest patches, so I strongly encourage everyone to upgrade.
Click to expand...
Click to collapse
Thanks so much for that! Google and CM did not give us a fast, stable and secure ROM, but you did.

I'd like to share a All F2FS compatible version
http://www.mediafire.com/download/idfb249mc3lozb3/CM11-20150830-ALL-F2FS.zip
Sent from my Nexus 7 using Tapatalk

Really great and fluid ROM!! Awesome. i guess, CM11 (KK 4.4.4) is the last and only ROM / Android version, which is running reasonably acceptable...
I nearly try all 5.1.x versions here - al became lagy and unusable (sometimes without reaction and suspended ).
Thanks!!!!!!!!

Gulfstream 650 said:
Which version is this built from, I'm currently using the M12 build?
Click to expand...
Click to collapse
Oh my... you should not use this outdated version anymore, thanks to issues with stagefright and "one certificate to bind them all".
As to the version, my build is based on the pure CM code, CM11 branch, with no changes. As official builds are only available for CM12 I had to, since CM12 is just crap on our device.

I flashed your ROM a few minutes ago and i think it is awesome!
Didn´t think about stagefright when installing it.....
Is there an other Fluid ROM which doesn´t come with stagefright and renders our device useless after some time? Had no luck with other Lollipop ROMs so far...

NeuDLi said:
New version available:
https://www.mediafire.com/folder/s2mrb38x07a6a6b,44johuqob71w1be/shared
Includes the latest patches, so I strongly encourage everyone to upgrade.
Click to expand...
Click to collapse
I am on 5.1.1 (LMY47V) stock/rooted.
Just to confirm, this ROM should get my grouper/nakasi device up to the latest security, StageFright included?
If so, any special instructions to update via TWRP via Wugfresh? Thanks

pshadoww said:
I'd like to share a All F2FS compatible version
http://www.mediafire.com/download/idfb249mc3lozb3/CM11-20150830-ALL-F2FS.zip
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Hi everyone.
Got tired of my laggy and constantly crashing unlocked and rooted Nexus 7 Lollipop 5.1.1. so I decided today to flash this Rom on it.
After entering the Team Win Recovery Mode I and wiping cache and Dalvik I chose the CM 11.0 zip file.
All went well and at the end I wiped again cache and Dalvik pressing after the reboot.
After that the tablet keeps getting stuck on the Cyanogenmod logo at startup.
Some help would be really appreciated, since I haven't found any helpful advices after googling the issue.
Thanks in advance

lmcmil said:
Hi everyone.
Got tired of my laggy and constantly crashing unlocked and rooted Nexus 7 Lollipop 5.1.1. so I decided today to flash this Rom on it.
After entering the Team Win Recovery Mode I and wiping cache and Dalvik I chose the CM 11.0 zip file.
All went well and at the end I wiped again cache and Dalvik pressing after the reboot.
After that the tablet keeps getting stuck on the Cyanogenmod logo at startup.
Some help would be really appreciated, since I haven't found any helpful advices after googling the issue.
Thanks in advance
Click to expand...
Click to collapse
I just got done tossing this ROM on it it seems to be working great.
Try wiping data? That is the only thing I did different than you. Not sure if wiping /system is needed. Also, make sure checksum is what it should be.
On a side note, which gapps should we use? CM's website has a 2014 version. I just need Google Store working. Thanks folks!
It seems pico will work for me, but what do I choose for Platform if this is an ok method?

lmcmil said:
Hi everyone.
Got tired of my laggy and constantly crashing unlocked and rooted Nexus 7 Lollipop 5.1.1. so I decided today to flash this Rom on it.
After entering the Team Win Recovery Mode I and wiping cache and Dalvik I chose the CM 11.0 zip file.
All went well and at the end I wiped again cache and Dalvik pressing after the reboot.
After that the tablet keeps getting stuck on the Cyanogenmod logo at startup.
Some help would be really appreciated, since I haven't found any helpful advices after googling the issue.
Thanks in advance
Click to expand...
Click to collapse
Make sure your partitions are all F2FS.
---------- Post added at 02:27 PM ---------- Previous post was at 02:25 PM ----------
mugsy77 said:
I just got done tossing this ROM on it it seems to be working great.
Try wiping data? That is the only thing I did different than you. Not sure if wiping /system is needed. Also, make sure checksum is what it should be.
On a side note, which gapps should we use? CM's website has a 2014 version. I just need Google Store working. Thanks folks!
It seems pico will work for me, but what do I choose for Platform if this is an ok method?
Click to expand...
Click to collapse
http://opengapps.org/

F2FS
Hi, pshadoww, What is the version of your F2FS CM11 based on? Is it based on m11 ? If so, do you have one that is based on the OP?
pshadoww said:
Make sure your partitions are all F2FS.
---------- Post added at 02:27 PM ---------- Previous post was at 02:25 PM ----------
http://opengapps.org/
Click to expand...
Click to collapse

The file I've shared is based on OP, just a different kernel (M-Kernel) for f2fs compatibility.

Hey, just a quick question: how do I get rid of the stock image of Google (5.1.1) and install yours? I have no clue how to do that. Anyone can help? Thanks!

[ROM][surnia][unofficial][7.1.2] Lineage 14.1 ROM with VoLTE(DEPRECATED)

THIS ROM WILL NO LONGER BE UPDATED
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is this ROM about?
This ROM is based on LineageOS but with VoLTE support and some additional security features included. These builds include a lot of security and performance optimizations even for the models that doesn't have VoLTE.
Instructions:
Do NOT dirty flash over non-VoLTE CyanogenMod or LineageOS releases.
Which models support VoLTE?
VoLTE is supported on the models where the baseband firmware supports it. Some models are listed below.
XT1521: It will work for sure if your baseband is up-to-date with what moto released in 6.0.1
Other XT152x models: depends on your baseband
Note for XT1521: Your Baseband will only be up to date if you have been updated to or flashed stock 6.0.1 as released by moto at least once and never downgraded it. If you have downgraded, update your baseband file NON-HLOS.bin to the one from stock 6.0.1 . (follow instructions in other threads at your own risk.)
Note for CDMA users including XT1526 and XT1529 . There have been reported network switching issues. and I recommend CDMA users to avoid this ROM.
Where to get this ROM?
I continuously release updated builds on my github page https://github.com/vishnunaini/lineage-surnia-releases/releases
The latest Build:
2017-06-18 build
Links:
https://github.com/vishnunaini/lineage-surnia-releases/releases/tag/20170618
https://github.com/vishnunaini/line...neage-14.1-20170618-00-vishnunaini-surnia.zip
sha256: 3cde80009a026e03e742727790ebccce92a031efe279507f819aeaebefefb14d
I also GPG sign my releases you can get the detached signature on the release page below
for old releases see here https://github.com/vishnunaini/lineage-surnia-releases/releases
I will release new builds once every week or two.
Only tested on XT1521 .
BUGS:
No Major bugs or show stoppers.
Caveats:
Does NOT include root or debugging features for security reasons.
How to flash :
Download the linked zip.
If you are flashing this ROM for the first time Wipe system, dalvik, cache, userdata and data. All old data will be lost.
Flash the zip using twrp or cm recovery.
Flash your favourite Gapps. Opengapps is recommended. Get them at http://opengapps.org .
Do NOT dirty flash unless you are already using a VoLTE build. Otherwise you will see crashes.
Please use the recovery linked below if you want a tested one
Use this recovery if required: https://github.com/vishnunaini/line...oad/20161229/recommended-recovery-cm-13.0.img
Contributors:
CyanogenMod/LineageOS maintainers and contributors.
Bug reporting:
Report any build specific bugs here https://github.com/vishnunaini/lineage-surnia-releases/issues
Versions:
Android 7.1.2
LineageOS 14.1
Kernel 3.10.x with latest security updates
SELinux: Enforcing
Root: NO
If you use gapps, Always flash gapps immediately after flashing an update or else gapps wont be preserved.
Source Code:
Core: https://github.com/LineageOS
Kernel: https://github.com/vishnunaini/android_kernel_motorola_msm8916 (see branch cm-14.1-custom)
Device changes: https://github.com/vishnunaini/android_device_motorola_msm8916-common (see branch cm-14.1-custom for new volte code that syncs with upstream. see cm-14.1-volte for old code) https://github.com/vishnunaini/android_device_motorola_surnia

Cool.. Btw is there any difference between this and Seraph08's cm14.1 build except the ROM name?

Can we flash using twrp...
N what gapps are recommended..
Sent from my XT1521 using XDA Labs

You can use twrp
use opengapps for android 7.1
enter.hk said:
Can we flash using twrp...
N what gapps are recommended..
Sent from my XT1521 using XDA Labs
Click to expand...
Click to collapse

This build includes latest security updates right down to today and some additional security hardening.
I do not know about Seraph08's build but I will describe what is in my build
cm-14.1 latest
+ VoLTE
+ YAMA LSM security module(helps chrome/chromium sandboxing)
+ PXN no-execute on user_page_table
+ latest upstream security updates till 20161229
+ disable ICMP timestamps for security
+ disable ICMP pings echoes
rushabshah32 said:
Cool.. Btw is there any difference between this and Seraph08's cm14.1 build except the ROM name?
Click to expand...
Click to collapse

Going to attempt this on a 1527. Will report back when flashed....
Update... Everything works perfect on xt1527 on boost mobile, and using fire kernel. LTE works, and have not seen any camera issues.

Did you try the kernel in this ROM? Did you flash fire kernel during the ROM flash itself?
drsemaj87 said:
Going to attempt this on a 1527. Will report back when flashed....
Update... Everything works perfect on xt1527 on boost mobile, and using fire kernel. LTE works, and have not seen any camera issues.
Click to expand...
Click to collapse

vnai said:
Did you try the kernel in this ROM? Did you flash fire kernel during the ROM flash itself?
Click to expand...
Click to collapse
No, I was going to try and run with your kernel, but forgot about it and flashed fire kernel along side the ROM. I can go back and flash the stock kernel and report back...
Update.. Flashed your stock kernel, camera fails to connect. Can't get it to even try. Everything else seems OK.
Another update, don't know if it's important. I'm running a xt1526, not a 1527. Oops.

The performance is good but there is a slight delay in opening background apps which is noticeable. All in all though the rom is stable.
Pair it with pixel mod and firekernel makes it a beast and VOLTE works too.

drsemaj87 said:
No, I was going to try and run with your kernel, but forgot about it and flashed fire kernel along side the ROM. I can go back and flash the stock kernel and report back...
Update.. Flashed your stock kernel, camera fails to connect. Can't get it to even try. Everything else seems OK.
Another update, don't know if it's important. I'm running a xt1526, not a 1527. Oops.
Click to expand...
Click to collapse
VOLTE works on xt1526 ??
Hit THANKS if somebody help you

ROM doesn't flash using TWRP 3.0.2-r1 on XT1521 it just stopped at about 45% & never crossed that

sonnu0100 said:
VOLTE works on xt1526 ??
Hit THANKS if somebody help you
Click to expand...
Click to collapse
I have no idea. I'm on boost mobile, which I don't think supports Volte. How do I find out if it works?
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
Sher1234 said:
ROM doesn't flash using TWRP 3.0.2-r1 on XT1521 it just stopped at about 45% & never crossed that
Click to expand...
Click to collapse
I believe the latest is r5, which is what I have. Try updating twrp.
Side note.. I think Bluetooth might be broken. It connects OK, but once I start music it locks up my stereo. I'll try with your kernel later, and if still have issues, I'll supply logs.
Edit. Bluetooth OK. Stereo was just frozen from cold weather.

Camera bug looks like a bug in the kernel.

I will fix my kernel and make a new release soon
drsemaj87 said:
No, I was going to try and run with your kernel, but forgot about it and flashed fire kernel along side the ROM. I can go back and flash the stock kernel and report back...
Update.. Flashed your stock kernel, camera fails to connect. Can't get it to even try. Everything else seems OK.
Another update, don't know if it's important. I'm running a xt1526, not a 1527. Oops.
Click to expand...
Click to collapse

Prefer cm-13 recovery instead. although it worked fine with twrp in my test.
Sher1234 said:
ROM doesn't flash using TWRP 3.0.2-r1 on XT1521 it just stopped at about 45% & never crossed that
Click to expand...
Click to collapse

vnai said:
Prefer cm-13 recovery instead. although it worked fine with twrp in my test.
Click to expand...
Click to collapse
I tried TWRP 3.0.2-r2 & r5 but still the same result

Try cm-13 recovery linked here https://github.com/vishnunaini/line...oad/20161229/recommended-recovery-cm-13.0.img
Sher1234 said:
I tried TWRP 3.0.2-r2 & r5 but still the same result
Click to expand...
Click to collapse

sonnu0100 said:
VOLTE works on xt1526 ??
Hit THANKS if somebody help you
Click to expand...
Click to collapse
Volte does not work on 1526 as boost mobile/ sprint does not support it.

vnai said:
Try cm-13 recovery linked here https://github.com/vishnunaini/line...oad/20161229/recommended-recovery-cm-13.0.img
Click to expand...
Click to collapse
It worked
Now on lineage 14.1 with Everything working fine except camera

drsemaj87 said:
I have no idea. I'm on boost mobile, which I don't think supports Volte. How do I find out if it works?
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
I believe the latest is r5, which is what I have. Try updating twrp.
Side note.. I think Bluetooth might be broken. It connects OK, but once I start music it locks up my stereo. I'll try with your kernel later, and if still have issues, I'll supply logs.
Edit. Bluetooth OK. Stereo was just frozen from cold weather.
Click to expand...
Click to collapse
drsemaj87 said:
Volte does not work on 1526 as boost mobile/ sprint does not support it.
Click to expand...
Click to collapse
I am using this model on a LTE only network . Tried cm14.1 but it was not able to connect call.
I think that for volte support it has to be enabled in firmware ( only asain varaint xt1521 supports volte out of box and supports on custom ron like cm14.1 and lineage os ) . If developer find a way to enable thia on these surnia models then it will be like a new suprise . Still waiting
Hit THANKS if somebody help you