Database Info

Micromax A60 CWM-Recovery v5 by ngage_me

Presenting CWM Recovery v5
Hi Friends, Here is the download link...
CLICK HERE (Eclair 2.1) with 2.6.29 Kernel
MD5 checksum 37d712d4b8fb3856cd68ffd7147ac9d7
Click to expand...
Click to collapse
Please test this recovery for new A60 devices purchased in 2012
Click here to downlaod New (25th April)
Follow the below procedure to install.
Click to expand...
Click to collapse
How to install... Better instructions here for novice..
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Purpose of this recovery...... I can see only few... To clarify others doubt...
1. We can utilize latest format of updater/update scripts... while flashing....
2. It does backup of sd-ext also.. not sure if u hv observed for v2.5 or not...
3. Better and faster....
4. Most important... A recovery have nothing to do with any ROM... so it's 2.1 or 2.2 or 2.3... Its sole purpose is to backup the partition
Click to expand...
Click to collapse
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..

CwM Recovery v5 for Froyo 2.2.1
Here is the link for A60 Froyo 2.2.1 users.....
CLICK HERE (Froyo 2.2.1) with 2.6.32 Kernel STILL WAITING FOR CLARO TESTERS... LINK IS FALSE NOW
Click to expand...
Click to collapse
Installation Procedure remains same as mentioned above.....
CLARO USERS RECOVERY IS UNDER TEST.. NEED MORE TESTER FOR CLARO
Click to expand...
Click to collapse
Cheers.... Njoy.... & Thank....

For those who are using the recovery for first time
1. Root ur phone. check here
2. install busybox from market.
3. Install "recovery manager".. check there is a "recoveryy" folder on ur sd card is created.
4. Download the latest recovery or the v2.5 recovery.. links on my signature..
5. place the downloaded recovery in "recoveryy" folder and flash it via recovery manager..
For those recovery 5 isn't work.. try v2.5 recovery first..
Follow the instruction carefully...
A better way of doing this on the way.. stay tuned...

ngage_me said:
Planned to post for eclair, froyo..
and also for claro users....
Click to expand...
Click to collapse
It was long time awaiting development from your side..Good work again, keep going.........

????
ngage_me, this recovery will enable us to run gingerbread on our fones or something else, thanks for the development, I have already clicked the thanks button.
ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse

link ?
dude when are you going to post the link ? and i have clicked on thanks !

ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
bro where is the link bro i am the most happiest man if this recovery works perfect in our a60 really thanks a lot bro

Sorry for d delay friends......
I did tested things.. nd all work fine.. jst usb toggle isn't work this time again..
it's detecting my sd-ext partition too... since i don't hv anything on sd-ext not sure if it will take backup.. for first few test it hvn't created any backup...
so just wanted to double sure before i post here.. that you guys don't loose ur valuable data of sd-ext..
so please b patient...
I'll upload it tonight......

@ngage_me-yes you did that again by making a new recovery as u made earlier, just one bug as you said in the mount corner except everything is fine........

confirmed successful flashing with android download tool on micromax a60.

thanks,I successfully flashed cwm recovery v5.0.2.8 using recovery manager.apk
Sent from my HTC Explorer A310e

@ngage_me
Awesome work!!!
Built from source??
Btw can I get recovery.fstab of this??
Sent from my Micromax_A70 using Tapatalk 2 Beta-4

Stuck at Micromax Screen
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?

awesome
bro really awesome bro downloading will reply in a while i already cliked thanks yesterday itself anyway thanks a lot bro
---------- Post added at 04:49 PM ---------- Previous post was at 04:31 PM ----------
bro your recovery is great can u please post me the backup.img files of the 2.1 eclair rom bro please i need them to flash it from the android download tool please help me bro
@nagae_me--please help me bro

rohan.sankhe said:
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?
Click to expand...
Click to collapse
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.

Congrtzzz.....
ngage_me said:
Presenting CWM Recovery v5
How to install...
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
hey ngage_me....its another grt work from u dude.....u rockzzzzz..........and tanx for upgrading us frm stone age.......
--------------------------------------------------------
Juz click thanx if u liked this post...!!!

small problem bro
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do

Suggestion....
sridz.y.j said:
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do
Click to expand...
Click to collapse
OK cool!!! seems u messed of few things...
Try factory reset from recovery....
else
follow this... (2.1 original rom)
1. download full dump, link available in signature..
2. In case Android tool is detecting ur phone gr888.. just flash all the image available in the zip... MAKE SURE U HIG ERASE CHECK BOX WHILE FLASHING..., else first install the usb driver available in zip...
3. then repeat the step 2.
i sure ur phone will be back on working.... u can directly flash this recovery instead of using stock recovery from zip...
later u hv all options to using ny other rom...
Cheers!!!...
And yeah sorry for d delay.. i ws out on a party yesterday...

ramyjec said:
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.
Click to expand...
Click to collapse
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...

ngage_me said:
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...
Click to expand...
Click to collapse
@ngage_me I am using Jet 2.1 (froyo one) and yours froyo recovery is not working (not installing through ARM 11 and if installed using recovery manager it stucks in micromax logo when going into recovery), but eclair recovery is working I have taken backup from it and everything sceems fine even sd-ext was backedup.

[Q] How to install Suvi Rom? and problem with JB Stock Rom

Well at first let me tell that that i am noob.. i have been browsing continuously for 2 days but i dont get these techy terms.
let me tell you my problem
1. i installed JB V1.11 SP based from http://forum.xda-developers.com/showthread.php?t=2160609 but it is mentioned that it is prerooted. after i instralled using SP tools following the procedure in various threads, i used root checker and it said "your phone has no proper root access" i was like confused.. how can be it so since it is "prerooted rom" right????
2. i also wanted to install later the Suvi ROm. so i downloaded again this rom from http://forum.xda-developers.com/showpost.php?p=43178120&postcount=1510 here... but is something CWM based. and how to install using the SP tools??? and will it root my phone after i install this???
3. How to install CWM recovery?? and is it essential to do it?
Currently i am using official jelly bean 4.1.1 on my micromax a110..
Rgards,
Nick.

leonine1989 said:
Well at first let me tell that that i am noob.. i have been browsing continuously for 2 days but i dont get these techy terms.
let me tell you my problem
1. i installed JB V1.11 SP based from http://forum.xda-developers.com/showthread.php?t=2160609 but it is mentioned that it is prerooted. after i instralled using SP tools following the procedure in various threads, i used root checker and it said "your phone has no proper root access" i was like confused.. how can be it so since it is "prerooted rom" right????
2. i also wanted to install later the Suvi ROm. so i downloaded again this rom from http://forum.xda-developers.com/showpost.php?p=43178120&postcount=1510 here... but is something CWM based. and how to install using the SP tools??? and will it root my phone after i install this???
3. How to install CWM recovery?? and is it essential to do it?
Currently i am using official jelly bean 4.1.1 on my micromax a110..
Rgards,
Nick.
Click to expand...
Click to collapse
Whoa Whoa.. Don't panic dude.. here's what you need to know.
Replies:
1. Yes, the ROM you flashed was pre-rooted... you need to give root permissions for the Root Checker app using SuperSU app... did you?
2. ClockWorkMod (CWM) is a very important and useful recovery... it's like safe mode in your windows.
To flash CWM:
i. Download MobileUncleMTK tool from google play.
ii. Give root permissions to the app when prompted.
ii. Download recovery.img and follow this procedure: http://forum.xda-developers.com/showthread.php?t=2204785
3. After successfully flashing CWM now download the SUVI ROM and put it in your SD card.. now go to your CWM recovery.. switch off your phone completely.. then press power button+volume up+volume down all three of them simultaneously.. then press volume up button once..
voila.. you're into your CWM recovery.. it will look like as in the screenshot of the above link...
4. Then follow the procedure for flashing SUVI ROM mentioned in its own thread...
Browse around the thread you'll know many things.. :good:
Hit Thanks :good: if i helped you :fingers-crossed:

adil uddin said:
Whoa Whoa.. Don't panic dude.. here's what you need to know.
Replies:
1. Yes, the ROM you flashed was pre-rooted... you need to give root permissions for the Root Checker app using SuperSU app... did you?
2. ClockWorkMod (CWM) is a very important and useful recovery... it's like safe mode in your windows.
To flash CWM:
i. Download MobileUncleMTK tool from google play.
ii. Give root permissions to the app when prompted.
ii. Download recovery.img and follow this procedure: http://forum.xda-developers.com/showthread.php?t=2204785
3. After successfully flashing CWM now download the SUVI ROM and put it in your SD card.. now go to your CWM recovery.. switch off your phone completely.. then press power button+volume up+volume down all three of them simultaneously.. then press volume up button once..
voila.. you're into your CWM recovery.. it will look like as in the screenshot of the above link...
4. Then follow the procedure for flashing SUVI ROM mentioned in its own thread...
Browse around the thread you'll know many things.. :good:
Hit Thanks :good: if i helped you :fingers-crossed:
Click to expand...
Click to collapse
Well explained...
Just to add to it, when flashing SUVI rom, do remember to download and place the boot.img file as mentioned in his post. :good:

adil uddin said:
Whoa Whoa.. Don't panic dude.. here's what you need to know.
Replies:
1. Yes, the ROM you flashed was pre-rooted... you need to give root permissions for the Root Checker app using SuperSU app... did you?
2. ClockWorkMod (CWM) is a very important and useful recovery... it's like safe mode in your windows.
To flash CWM:
i. Download MobileUncleMTK tool from google play.
ii. Give root permissions to the app when prompted.
ii. Download recovery.img and follow this procedure: http://forum.xda-developers.com/showthread.php?t=2204785
3. After successfully flashing CWM now download the SUVI ROM and put it in your SD card.. now go to your CWM recovery.. switch off your phone completely.. then press power button+volume up+volume down all three of them simultaneously.. then press volume up button once..
voila.. you're into your CWM recovery.. it will look like as in the screenshot of the above link...
4. Then follow the procedure for flashing SUVI ROM mentioned in its own thread...
Browse around the thread you'll know many things.. :good:
Hit Thanks :good: if i helped you :fingers-crossed:
Click to expand...
Click to collapse
heyyy thank you... i got u...
but after i installed that prerooted rom... there is no app in my menu like SuperUs... how to do that??

leonine1989 said:
heyyy thank you... i got u...
but after i installed that prerooted rom... there is no app in my menu like SuperUs... how to do that??
Click to expand...
Click to collapse
Then it seems you didn't flash the rooted ROM... check the thread carefully which ROM did you flash?
---------- Post added at 11:32 PM ---------- Previous post was at 11:31 PM ----------
ibshar said:
Well explained...
Just to add to it, when flashing SUVI rom, do remember to download and place the boot.img file as mentioned in his post. :good:
Click to expand...
Click to collapse
:silly: Yup i sure forgot that

Galaxy s duos s7562 L-Touch rom problem

ı have a problem
My phone have cosmic rom but i want change
i like this but i can not
i flash stock (s7562xxbmj1) rom and flash the cmw recovery everything okay
then i moved L-Tocuh rom on the phone
i wipe data cache dalvk cache battery stats and install your rom
rom is quickly installed about 10 second
i install file and bugfix zip
and i reboot,telephone was staying first boot screen (Samsung galaxy s duos 7562 screen)
i try wipe data cache ...
i tryed three time
how can i fix this ?
Thanks

help pls

enom6 said:
ı have a problem
My phone have cosmic rom but i want change
i like this but i can not
i flash stock (s7562xxbmj1) rom and flash the cmw recovery everything okay
then i moved L-Tocuh rom on the phone
i wipe data cache dalvk cache battery stats and install your rom
rom is quickly installed about 10 second
i install file and bugfix zip
and i reboot,telephone was staying first boot screen (Samsung galaxy s duos 7562 screen)
i try wipe data cache ...
i tryed three time
how can i fix this ?
Thanks
Click to expand...
Click to collapse
Try to change kernal.

[email protected] # said:
Try to change kernal.
Click to expand...
Click to collapse
before flashing rom or later ?
thanks

enom6 said:
before flashing rom or later ?
thanks
Click to expand...
Click to collapse
Ltouch ROM runs smoothly on gts7562.I didn't face any problem after flashing ROM.
If u have issue then try these steps -
1- wipe data,cache,dalvik
2-go to mounts and storage
3-choose format/system then select yes
4- after formating system, install zip from sdcard
5- flash L-touchrom.zip & file.zip
6- reboot & wait
If ur device stuck on boot screen then try to change kernal.
Before do anything make nandroid backup for safety.
Try & report again.

[email protected] # said:
Ltouch ROM runs smoothly on gts7562.I didn't face any problem after flashing ROM.
If u have issue then try these steps -
1- wipe data,cache,dalvik
2-go to mounts and storage
3-choose format/system then select yes
4- after formating system, install zip from sdcard
5- flash L-touchrom.zip & file.zip
6- reboot & wait
If ur device stuck on boot screen then try to change kernal.
Before do anything make nandroid backup for safety.
Try & report again.
Click to expand...
Click to collapse
i do everything you say data cache dalvik cache format system then flashed ktouch rom and file but phone wait same screen
then ı flashed another kernel (kernel-xvasek-013-1.19GHz)
but same problem
when installing rom, problem does not appear everything is okay
but rom flashing quickly in 10 second
does not appear a error
problem is my baseband?

enom6 said:
i do everything you say data cache dalvik cache format system then flashed ktouch rom and file but phone wait same screen
then ı flashed another kernel (kernel-xvasek-013-1.19GHz)
but same problem
when installing rom, problem does not appear everything is okay
but rom flashing quickly in 10 second
does not appear a error
problem is my baseband?
Click to expand...
Click to collapse
OK if ur problem is baseband then try this-
Compatible Baseband is S7562XXBMJ1 for LTouch rom
U can easily change ur baseband to s7562XXBMJ1 with this method below (by me) :-
http://forum.xda-developers.com/showthread.php?t=3091922
download modem and flash with cwm or twrp.

[email protected] # said:
OK if ur problem is baseband then try this-
Compatible Baseband is S7562XXBMJ1 for LTouch rom
U can easily change ur baseband to s7562XXBMJ1 with this method below (by me) :-
http://forum.xda-developers.com/showthread.php?t=3091922
download modem and flash with cwm or twrp.
Click to expand...
Click to collapse
no same problem
i do you say 2 way
cant open phone
whats the problem i dont understand
ı try cosmic and xperience rom no problem
but l touch and pmp roms not open in my phone

enom6 said:
no same problem
i do you say 2 way
cant open phone
whats the problem i dont understand
ı try cosmic and xperience rom no problem
but l touch and pmp roms not open in my phone
Click to expand...
Click to collapse
I guess ur LtouchRom.zip (rom package) is coruppted, redownload & try again.
Which cwm recovery version u using?
U have to use cwm v 5.5 (I am using CWM 5.5)
Ltouch rom & pmp roms works fine in my own device.
U say that flashing time is 10 sec but real flashing time is about 2min.

[email protected] # said:
I guess ur LtouchRom.zip (rom package) is coruppted, redownload & try again.
Which cwm recovery version u using?
U have to use cwm v 5.5 (I am using CWM 5.5)
Ltouch rom & pmp roms works fine in my own device.
U say that flashing time is 10 sec but real flashing time is about 2min.
Click to expand...
Click to collapse
thanks bro
rom package is correct i'm sure im redownload 2 times
my cmw recovery version is 5.5.0.4
you are using ltouch rom?

enom6 said:
thanks bro
rom package is correct i'm sure im redownload 2 times
my cmw recovery version is 5.5.0.4
you are using ltouch rom?
Click to expand...
Click to collapse
Yes,Ltouch ROM works smoothly for me without any issue.
I don't understand what's the problem with ur device.
Try to flash Ltouch ROM with TWRP 2.7 recovery & report again.
Twrp recovery download link :-
d-h.st/IyGy
Download recovery.zip & flash with cwm recovery.
After flashing in cwm..
Go to advance & select reboot recovery
Now u will see TWRP recovery,which successfully installed in ur s duos.
In TWRP click on install & select ROM package,flash it(swipe).
If above method not works 4u then I suggest u, try this..
1-Flash stock firmware (like .tar.md5) with Odin
2- root ur device ( I like unlockRoot pro for rooting bcuz it's a one click root method)
3- install cwm recovery 5.5 & again flash Ltouch ROM.
That's all.
Gud Luck.....:thumbup:
Hope this works 4 u..

[email protected] # said:
Yes,Ltouch ROM works smoothly for me without any issue.
I don't understand what's the problem with ur device.
Try to flash Ltouch ROM with TWRP 2.7 recovery & report again.
Twrp recovery download link :-
d-h.st/IyGy
Download recovery.zip & flash with cwm recovery.
After flashing in cwm..
Go to advance & select reboot recovery
Now u will see TWRP recovery,which successfully installed in ur s duos.
In TWRP click on install & select ROM package,flash it(swipe).
If above method not works 4u then I suggest u, try this..
1-Flash stock firmware (like .tar.md5) with Odin
2- root ur device ( I like unlockRoot pro for rooting bcuz it's a one click root method)
3- install cwm recovery 5.5 & again flash Ltouch ROM.
That's all.
Gud Luck.....:thumbup:
Hope this works 4 u..
Click to expand...
Click to collapse
oh thanks bro twrp is worked
everyting okay thanks

enom6 said:
oh thanks bro twrp is worked
everyting okay thanks
Click to expand...
Click to collapse
Ur welcome..
# Happy to help u #
OK,TWRP solved ur problem,so now u r using Ltouch ROM,am I right ?
Thanks for report .
Hope,It would be helpful for more people.

[email protected] # said:
Ur welcome..
# Happy to help u #
OK,TWRP solved ur problem,so now u r using Ltouch ROM,am I right ?
Thanks for report .
Hope,It would be helpful for more people.
Click to expand...
Click to collapse
Yes solved i'm using L-touch rom now, its working smoothly
Thanks again

M not getting the main zip file of L-touch rom..can u send me the link

shubham1001 said:
M not getting the main zip file of L-touch rom..can u send me the link
Click to expand...
Click to collapse
Here is the link I got on internet not verified by there where positive comment so it will be most likely legit
http://www.mediafire.com/?86mon9bsrk6mhu5

Lyf flame 6 ls 4005 backup stock rom flash to fastboot

Flame 6 Flash by Fastboot Method....I'm Searching official firmware online there is no available ...
FLame 6 also not pre-installed play store.so i trying root and flash gapps .and then i m factory reset
setup screen cannot finish.. becoz flame 6 not gapps thats the problem... i already backup from flashfire apk
so im here share my backup rom. pure Official with rooted.
steps:
1.extract all files in fastboot folder see attachment like that
2.Goto fastboot mode volume down +power then android logo comes afeter volume up hold +power single press see to reboot bootloader
3.fastboot folder hold shift and right click open cmd here
4.type fastboot devices shows that model
5.then come to fastboot folder double click the flash all.bat file then automatic run flashing to ur mobile wait 10 min
finished type fastboot reboot to phone ..Enjoy dont forget to hit thanks.....:good:
Download Links​
https://mega.nz/#!i1wGmZxS!ryR9V2BcbCTniCJMG7qj8VlQfRHc9D0MVgpQvlpy3mo
https://mega.nz/#!nkgmxawJ!qSU0saW-UMGXf-xTL9IaEilHDEL984N6wJc3dq9APZQ
Credits: For Great App
 @Chainfire

Which version is it?
The latest build version is LYS_4005_06_11

step Needed
hi. bro please specify the full steps to flash my mobile lyf 4005

Please provide all steps.

Have anyone tried this ... please reply and describe the steps ....in a easy way....
Thanks..☺

I did tried, but doesn't works with fastboot properly, I think its driver problem, please help me bro how to fix it
and thanks for this fastboot flash file. :good:

I want only stock recovery, anyone plz upload it. Flame 6.
Sent from my LS-4005 using Tapatalk

i trayed thios method and it is so easy
i trayed this method and it is so easy and thanks bro you don gread job now i upload video for all this steps soon thanck bro agin for this

it has been successfully flashed in my Flame 6 its very easy. again thank u for this Fastboot file. but the ROM hasn't rooted.
In my way I did root my flame 6 by kingroot and also install Gapps successfully by replacing method
can any one make custom recovery for this mobile

Im stuck ar waiting for device, i think drivers problem how to install drivers plz help

can i unroot after flash this sotck rom ?fast reply

skyrp said:
can i unroot after flash this sotck rom ?fast reply
Click to expand...
Click to collapse
This ROM hasn't rooted ! ,this is fully unrooted ROM you can be root after Flash this ROM

i wil upload a new flshifay bacup
MTK001 said:
it has been successfully flashed in my Flame 6 its very easy. again thank u for this Fastboot file. but the ROM hasn't rooted.
In my way I did root my flame 6 by kingroot and also install Gapps successfully by replacing method
can any one make custom recovery for this mobile
Click to expand...
Click to collapse
in this back up rooted and pre plystore instaled
link wil upload soon....

shabbirsaify said:
in this back up rooted and pre plystore instaled
link wil upload soon....
Click to expand...
Click to collapse
Bro Flashify Doesn't work with this phone because flashify need a custom recovery like CWM/TWRP to perform
I did place the Gapps one by one,
required gapps;
1.'google-framework-services.apk'
2.'google-account-manager.apk'
3.'Google Play Store.apk'
4.'Google Play Services'
Thats All Thank U

I've successfully installed Google Play Store in my flame 6
Watch this Video ;
Click Here

please upload video on youtube and give lin
shabbirsaify said:
i trayed this method and it is so easy and thanks bro you don gread job now i upload video for all this steps soon thanck bro agin for this
Click to expand...
Click to collapse
please help me because my phone is bricked

shabbirsaify said:
i trayed this method and it is so easy and thanks bro you don gread job now i upload video for all this steps soon thanck bro agin for this
Click to expand...
Click to collapse
please upload video

.....
shabbirsaify said:
i trayed this method and it is so easy and thanks bro you don gread job now i upload video for all this steps soon thanck bro agin for this
Click to expand...
Click to collapse
please upload video....

Files for lyf ls-4005
MTK001 said:
Bro Flashify Doesn't work with this phone because flashify need a custom recovery like CWM/TWRP to perform
I did place the Gapps one by one,
required gapps;
1.'google-framework-services.apk'
2.'google-account-manager.apk'
3.'Google Play Store.apk'
4.'Google Play Services'
Thats All Thank U
Click to expand...
Click to collapse
Can you provide the links for these files working with lyf ls-4005

link is not working please help my lyf phone is bricked

[Video][How-To]Fix Unable To mount /system while installing a ROM

This is a Video TUT on How to fix Unable To Mount /System Partiton
While Flashing A Rom:-
In The Video I have used the Multi-Rom TWRP 3.0.0 but this problem occurred with every Version
Watch the video - Video Starting is About the problem and then the solution to flash roms bypassing this prob.
*This is My First video so ignore Mistakes i made:silly:
Use EarPhone For Best Sound
Proper Method To -Install a rom From TWRP Follow:-
1).Reboot Into recovery [Obviously]
2).Select Wipe-AdvanceWipe-and select Dalvik,Cache,System,Data and Swipe the slider to wipe
3) Then Follow the Procedure i mentioned in video above
4).Then install Any Rom u want
Note:- This is not a permanent fix you have to follow the same procedure every time you want to install the ROM
THANKS To
XDA-Devs
@Sheref (for asking a Video Tut)
@GautamMaini (For Video and Thread)
Do Hit Thanks Button If I Helped It Encourages ME

Reserved Waiting For Video to Upload

Very helpful bro:good:

Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.

Sheref said:
Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.
Click to expand...
Click to collapse
What it is

Gautam Maini said:
What it is
Click to expand...
Click to collapse
I'm using old twrp 2.7..1...
Select wipe and select system and then select repair or change file system(something like that)and change the system partition ext4 to ext3 and wipe ,done .install ROM . now I flashed baiducloud os and it successfully installed and booted.
Sry for my bad English

bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx

aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
First Wipe system then restart recovery with no os installed. Then mount system and install rom !
Otherwise
Update to latest twrp

aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.

Thanks!!! You Are great

TheAndroidMods said:
Thanks!!! You Are great
Click to expand...
Click to collapse
Pleasure Helping

Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
thanks bro u saved the day

aniket_anky said:
thanks bro u saved the day
Click to expand...
Click to collapse
Welcome bro. :good::laugh:

Thanks a Core!
Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core

zooperaj said:
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core
Click to expand...
Click to collapse
Thanks bro.
32bit also not worked for me , idk why. Thanks for trying it. :angel: :angel::angel::angel:

hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .

[email protected] said:
hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .
Click to expand...
Click to collapse
Don't mess

Gautam Maini said:
Don't mess
Click to expand...
Click to collapse
you mean its impossible to do so

[email protected] said:
you mean its impossible to do so
Click to expand...
Click to collapse
Yes you can say . Repartition can lead to derious damage