Related
System Specs:
TF101
Android Version: 4.1.1 (now 4.1.2)
Kernel Version: 2.6.39.4 CyanogenMod RaymanFX DHD (now 2.6.39.4ASUS [email protected] #1 Sat Oct 13 19:34:10 CEST 2012)
CyanogenMod Version 10-20120916-UNOFFICIAL-tf101 (now 10-20121013-UNOFFICIAL-tf101)
Problem
com.google.process.gapps stops working
What I have done so far:
Cleared cache
Cleared davlik cache
Removed Gmail account and re-added
Disabled ALL sync options
What I did to get here:
Installed TWRP (replaced Clockwork Recovery)
Installed CM10
Installed GooManager (for gapps)
Restored ALL apps I had/wanted back from the Play store
This problem occured immediately after I finished installing all apps. I dont know what one app might have caused this. I am trying to avoid a factory reset, but it seems this may not be avoidable at this current step. My question is, what else is there I can do short of a factory reset?
EDIT 1: just found out the GAPPS i am using is for 4.1.2. Would this cause the issue since i am on Android 4.1.1?
EDIT 2: Re-flashed the GAPPS from GooManager and it seems to be working better. I will update after testing it throughout my 24 hour duty.
EDIT 3: I let it go to "sleep" and when i woke it up, the process failed again.
EDIT 4: Used another version of GAPPS for Tegra. Now trebuchet crashes after going to sleep. Seems the GAPPS is the cause of the problem. Is there a stable version for my device and CM10? The latest crashes the com.process.google.gapps and the later crashes trebuchet
.
EDIT 5: After a night of troubleshooting, I found out i was using version B3 instead of V6 of CM10. Thus the Android version of 4.1.1 instead of 4.1.2. I just flashed V6 to my tablet and now I am testing the device for compatibility with the first version of GAPPS that i had installed earlier. I will post results after my tests.
EDIT 6: So far so good, everything seems to be running normally. I have not had any problems for the last five hours. I hope this fixed my problem
EDIT 7: So after waking up to my tablet sleeping, i woke it and the process failed again. Is there a compadible GAPPS zip out there somewhere?
EDIT 8: Ok, so I decided to do a factory wipe, install CM10 V6 fresh. Then install google apps filename "gapps-jb-20121011-signed.zip" Seems that the google apps keeps failing. I even unchecked all the sync options and didn't put my account in until after i installed the google apps. At this time there are NO apps installed other than the default CM and GAPPS. I am officially stumped. HELP PLEASE!
EDIT 9: I did a factory wipe, no re-install of CM10 or GAPPS, just a standard wipe followed by clearing both caches. Upon reboot it wanted my credentials for google. Seems to be working ok, meaning it GAPPS is not crashing at this current moment. However, it has dropped WiFi on me while it went to sleep and came back. I told it to not turn WiFi off when it sleeps, but alas, it seems to be broken. Also, it lockes up randomly, and the only way to recover is to hold the power button to turn it off and then reboot. Thoughts?
EDIT 10: Changed to the nightlys from CM and updated to the most recent GAPPS. Everything is working great. Minus some of the things that have already been mentioned. My lock screen disappears ever so often. Also, I have noticed that when not charging, the tablet will shut down at 49% when sleeping. I don't know if that is a feature of the CM10, but it is annoying. I have yet to have any random lock ups, but some of my apps won't work anymore. I have noticed that some apps will work one moment, the next it will have a video failure, but the sound will continue and the process will continue. Just the video display will be stuck on one image. For example, Jetpack Joyride does this. Also, Song Pop Free will not work, among some other apps. So, I guess I have to wait for a Jelly Bean update for some of these apps.
I've had a similar issue with gapps, usual provoked by accessing gmail or maps however I did have the same issue with the stock rom.
Sent from my Transformer using Tapatalk HD
I appreciate the info, was this with ICS or Jelly Bean? I am assuming with your stock you mean ICS. Am I missing something about GAPPS? Is there a better compatible build for this?
.. just go to the settings and then click on the application manager and then click on all and then scroll to download manager and enable it if it is disabled. .......Thanks. ....
video
haythams said:
.. just go to the settings and then click on the application manager and then click on all and then scroll to download manager and enable it if it is disabled. .......Thanks. ....
Click to expand...
Click to collapse
just like this video
go to youtube and type com.google.procces.gapps and click the video that says solution for the problem.
humnn. did you got that idea from this.
haythams said:
.. just go to the settings and then click on the application manager and then click on all and then scroll to download manager and enable it if it is disabled. .......Thanks. ....
Click to expand...
Click to collapse
thanks bro it worked. thanks for the info.
I had a slightly different solution
wipe the google play services data complete it will then need to be updated
All the widgets that I use gets disappeared whenever I reboot my device. All the defaults apps get cleared too. I dont know why this is happening but I want to fix it.
One more thing whenever I use any module of Xposed framework which asks for soft reboot the device keeps popping up the message of unfortunately system UI has stopped. But the problem gets solved when I reboot my device but the changes made by the module disappears..
Is there any solution to it?
P.S. My device is rooted but I dont have CWM recovery.
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
I am going through the exact same problem on the exact same device with the exact same versions of update file and gapps zip file.
After almost trying to search any possible solution to it on google and xda, I gave up and tried to solve it myself by looking into the phone itself. There wasnt much I was able to do because of the Crash Loop saying "Unfortunately, Setup Wizard has stopped". So to rest the situation for now, I somehow went into Setting > Apps > Show System > Setup Wizard with setting logo and not the Cynogen Logo one! And Force stopped it.
Also, I cant open my home on the phone either. I press the home button and the Setup Wizard starts to crash again!
Its painful to see your beloved phone struggle to work like that! I sometimes hate CynogenMod for their nightlies and wish I could go back to the stable versions of Oxygen or CM 12!
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Tried More than 5 Different Gapps
playya said:
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
Click to expand...
Click to collapse
Initially, I thought its just an update. So there wont be any need to install Gapps back again. But then The Play store kept crashing. So I rebooted my phone after cleaning Google Play Services and Play Store.
That didn't help. Then Found somewhere written that the issue might be caused by corrupt Gapps or incompatible Gapps, So tried installing The Gapps downloaded from OpenGapps. There I downloaded all the versions of it from , Stock to nano and pico. None of them helped. The Phone is still crashing saying The Setup Wizard has stopped. Can't open Home Screen Either. Can't open Keyboard either.
Abhinav_Rakesh said:
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
abhishek.karvi said:
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
Click to expand...
Click to collapse
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Was getting the same error
Wiped the whole phone off including data reinstalled cm 13 (latest nightly i.e 28112015) and added the opengapps nano package to the flashing zip que in twrp solved the problem
Abhinav_Rakesh said:
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
abhishek.karvi said:
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
Click to expand...
Click to collapse
Found a solution!
Looks like the Gapps from Opengapps werent compatible with the 6.0 Marshmallow yet.
I spent a day looking for different gapps and tried them all on my phone.
The only gapps file which worked with CM13.120151128 update for the oneplus one was this one -->
But before installing this, In TWRP you need to Go to Wipe>Advanced Wipe And select > System, Data, Dalvik and Cache to wipe everything from your phone. Then Fresh install CM13.120151128 and Slim Zero gapps you downloaded from the above link!
All Of this, only if you want to really run your phone with Android 6.0 Marshmallow!
abhishek.karvi said:
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
Click to expand...
Click to collapse
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
Thanks for this, it did the trick for me
Now running CM13.0-20151201 NIGHTLY Bacon.
The error "Setup Wizard Stopped" of in het nederlands "Installatiewizard gestopt" has not shown up again after changing permissions for "Setup Wizard" (one without cm logo)
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
MrSeler said:
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
Click to expand...
Click to collapse
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
maxpayne1989 said:
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
Click to expand...
Click to collapse
yeah i m going to try this a few times more and write what were the results. all i have to do is simply copy the gapps into my phone, the pc sees it but im not able to access it in any way and cant figure out how.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
pankspoo said:
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
Click to expand...
Click to collapse
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
You're a life saver. Thanks for the tip! It works for me.
Yes I have the same setup and the same problem.
Interesting appraoch ... . My problem: I do not have "Setup Wizard" in the Apps List within settings ... and my phone stay unuseable
-------------------------
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I tried this approach to get rid of the "Setup Wizard has stopped" pop-up error, but got an error message when I tried to execute the command ...
>adb shell pm disable com.google.android.setupwizard
CANNOT LINK EXECUTABLE: cannot locate symbol "android_set_rt_ioprio" referenced by "/system/lib/libinputflinger.so".
page record for 0xb6f0f04c was not found (block_size=32)
tungdil said:
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
Click to expand...
Click to collapse
Hi together,
after flashing the open gapps I got this:
"Unfortunately, Setup Wizard has stopped"" application crashed message
I tried the full -> Error 70
only the nano could be flashed and after reboot I got the same error: "Unfortunately, Setup Wizard has stopped"" application crashed message
I also tried to wipe ... no changes ..
what can I do to get gapps running on CM13?
Hi,
with the installation cm-13.0-20151128-NIGHTLY-hammerhead.zip I have the same problem... When the phone turns on I got the same error "Unfortunately, Setup Wizard has stopped", You have two options REPORT ERROR and OK, if I press OK then immediately displays the same error msg. and you can not continue..
what is the solution?
strozi78 said:
Hi,
with the installation cm-13.0-20151128-NIGHTLY-hammerhead.zip I have the same problem... When the phone turns on I got the same error "Unfortunately, Setup Wizard has stopped", You have two options REPORT ERROR and OK, if I press OK then immediately displays the same error msg. and you can not continue..
what is the solution?
Click to expand...
Click to collapse
haven't found one yet ... and you?
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Kuarinfou said:
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Click to expand...
Click to collapse
thanks that solved the problem with the setup wizard ...
and now I can run playstore but can't download apps - I got the error: Error while fetching information from Server
solved! ... deleted google accound and remapped
Only the Setup wizard popup stops coming. Thanks for that.
There is a random popup about Google Play services which disappears on its own. I have given all permissions to the Google Play services app using the same steps as provided earlier. Still the same.
Please help.
Also in addition to this, there is a fix given by the OpenGAPPS team on GitHub as Notes for Android 6.0 (Sorry, cannot post link as this is my first post).
Can anyone help me patch this file onto my device (LG Nexus 5)?
Thanks in advance.
Maybe try different versions of gapps? I use the latest pico version and it works on the latest nightly.
I tried, micro, pico, stock.. All with same results. I was using nightly that came out on 12/02/2015.
Currently I reverted back to cm12.1 as I need to use the phone for day to day stuff. Please let me know if the latest nightly does actually fix this. And also which gapps, I will download the specified file and let you know by weekend.
Thanks for the help!
Try these gapps: http://opengapps.org
Yes I was using gapps from this site. I just need confirmation if the new cm13 nightly actually fixes the issue.
I guess it's not even with Cyanogen to fix the issue. The gapps when installed (flashed) , don't get the desired permissions to execute. It should be the a new gapps build released by opengapps. Still, I will keep searching.
PS: please look at the fix given by gapps team. I also don't know where to modify that code.
Here is how i got it to work.
1) Boot to recovery
2) Do a full wipe (Data,System,Cache,Dalvik)
3)Flash CM13
4)Do a wipe (Cache,Dalvik)
5)Flash GAPPS ( I used pico from Open Gapps)
6)Do a wipe (Cache,Dalvik)
7) Do a Factory Reset.
8) Reboot !
That should do it, Don't complain about useless wipes after trying for 2 days this finally worked !
I have my lovely G3 back
Good Luck !
I got it to work to flash it together with the ROM.
Cheers
I managed to make it work by installing CM13, in recovery mount /system and check how much space left on you system partition. After that you can choose the maximum size Gapps that fits the free space.
Wipe all excluding sdcard and USB-OTG. Install CM13 and Gapps together.
After reboot the wizard will not crash.
Other option is risky and can turn your phone into a break This is option is to resize /system to make it bigger.
I used the latest nightly CM13 for Xiaomi Mi4 and twrp-2.8.7.0-cancro
Solved
This guy will solve your issue watch this video
Search
Moto G Cm13 Gapps Fix (Setup Wizard)-TechZotic
on YouTube
sorry couldnt paste link as i am a new user
holzfelix said:
thanks that solved the problem with the setup wizard ...
and now I can run playstore but can't download apps - I got the error: Error while fetching information from Server
Click to expand...
Click to collapse
Thanks. This worked for me, although I had 2 Setup Wizard apps. The one with the CM logo had no permissions that needed assigning. The other one did. Once permissions were given, the issue went away. It was tricky to do it between the error dialogs appearing. What helped was switching to the guest account and back, then, occasionally, you had enough time to work the settings.
Had those Problems often, don't know why.
I just delete the settingwizard.apk in twrp (mount system, then system/priv-app if I remember).
Worked Several Times for me - you must do that always After flashing gapps!
My Fix....worked for me on HTC One M8
NOTE: Ensure you have a NANDROID backup BEFORE proceeding with the below, just in case something goes wrong
1. Ensure that you have all required files (CM13 Zip and Open GAPP Zip) saved to your phone (internal or SD card)
2. In my case, I used TWRP, so ensure you have the latest one
3. Boot into TWRP recovery
4. Using ‘WIPE’ option, select ‘Advance’ and choose: Data, Dalvik, Cache, System
5. Using ‘INSTALL’ option, Install CM13 via TWRP
6. DO NOT BOOT UP PHONE JUST YET
7. Perform a Cache and Dalvik wipe
8. Using ‘INSTALL’ option, Install GAPP Zip via TWRP (I used GAPP mini due to space)
9. Now you may reboot the phone.
The solved the ‘Setup not working’ issue for me and my phone is now working like a charm with CM13 and google apps! I have a HTC One M8 FYI
ThankYou So MUCH!
Kuarinfou said:
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Click to expand...
Click to collapse
You're A Life Saver! Thanks!
please share solution for this or any working apps link..
Hello
Info:
Updated recently to 11 using full factory image with wipe (with - w flag).
Rooted with Magisk (canary update channel, see images)
Patched clean boot file and flashed with fastboot flash boot magisk_patched.img
All good.
Problem: trying to open a .docx file from storage with M$ Word. Screen goes black and phone restarts. On first restart I get the dreaded "cannot load android system - try again or factory reset. Luckily try again does boot my phone.
Attempted solution: remove and reinstall word - click uninstall -" the app wasn't found in the list of installed apps" - see image.
Went to play store to reinstall - only have "open" button - when clicked, screen goes black and back to "cannot load android system" screen ?
Any ideas/advice much appreciated
Many thanks
*Update*
Couldn't resolve via normal methods -
Used App Inspector (UBQSoft) from playstore to see if M$ Word showed up in there and it did:
From there, clicked the cog wheel to go through to "App Info" screen and was able to successfully uninstall from there.
Installed the Office full suite as a work around and am now able to open the document as needed.
Any thoughts or info still appreciate - especially if anyone has had a similar bug, even with different apps.
Many thanks ?
Further Update
So, I've gone back to the same document about an hour after being able to open it - same prob, screen goes black, phone restarts to "cannot load android system - try again or factory reset"
Tried open again from within Files,
got message "none of you apps can open this file"
I have office installed - see images.
I think I'm going to go back to Android 10 - this is quite the inconvenience for the time being
Not sure if it's 11, Magisk or kernel (using the latest EXKM)
but it's system UI that keeps crashing - I cleared out storage and cache as I am currently unable to uninstall Office, even via App Inspector.
*Solved*
Removed one of my Outlook/Micro$oft accounts to which Word and Office were both previously syncing - removed Office via playstore Uninstall button and rebooted phone.
Tested opening the same document both from Files, SolidExplorer and from within Word, opens for editing no probs and performs as expected.
Root and EXKM still installed and fine.
Sorry for multiple updates, just thought it might be useful for anyobe with similar issues.
?