Related
Do All The Following At Your Own Risk. I Will Not Be Responsible In Any Case.
Click to expand...
Click to collapse
Rooting
1.Rooting i9 stock rom is very simple, download the framaroot app attached below
2.Install framaroot
3.Open framaroot and select install supersu
4.Choose the 3rd method (Barahir)
5.Now install busybox if you want
6.You are now rooted
For KitKat Update Click Here
Credits
umangleekha
Custom Recovery
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
http://www.mediafire.com/download/b99962l7273y4du/MPRioRecoveryInstaller.apk
Credits
ng0tkul4
Battery Mod
You must have noticed that about 4% battery is drained till morning when phone is in standby, a simple buildprop tweak can solve this and now my phone drains only 0% OR 1% battery in standby overnight, just follow the steps below-
1.You must be rooted before doing this
2.Download root browser from playstore
3.Open Root Browser.
4.Scroll down and open system folder
5.Open build.prop, you will see a menu asking how to open the file, select Text Editor
6.Now be very careful, don't make any mistake here
7.Scroll to the bottom and type "pm.sleep_mode=1"
8.Now press back button twice then press yes to save the changes and restart
9.Now enjoy no battery drain
Credits
umangleekha
Stock ROM
1) Download the ROM from the link https://mega.co.nz/#!YwBRkCxB!hTSU0eqI-zMwufgqug2qaHpVrTutXnPCn4rPVJfAtEM.
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
Credits
malick186
Miui ROM with OTA updates
Features:
Official MIUI V5
Nokia Keyboard
Official OTA updates
Extreme Scrolling
Init.d Support
Zipaligned
1) Download the ROM from the link http://d-h.st/Pc2
2) Once you have downloaded the ROM File, mount your phones SD card and and copy over the .zip file.
3) Power off the device and then boot up to recovery.
4) In your phone's custom recovery, locate the menu options which allow you to wipe the phone and wipe cache.
5) Once your phone has been wiped go back up to the root of the menu and select 'Flash Zip from SD Card' the text may be different per Recovery.
6) Locate the ROM .Zip file you wish to flash.
7) Confirm the flash by following the on-screen instructions.
8) If no errors arise during the flashing process then the ROM flash was successful, Reboot the device.
OTA Updates
Click Here For Updates
Credits
INCPAK Team
helloansuman
Custom ROMs
Reserved For More ROMs
KitKat Rom For i9
For Updating QMobile i9 to KitKat Follow This Link
KitKat QMobile i9 Link
Need some help bro! Whenever flash the miui rom my internal sd card dnt get mounted! Any workaround which you know??? reply asap!
Sent from my MIUI using XDA Free mobile app
Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow
qwerfaseeh said:
Ya there is an issue in some cell phones about miui if you are using the miui I provided then use miui for s5501 or mmx120 version it will solve your problem but dont use miui for wiko rainbow
Click to expand...
Click to collapse
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app
malick186 said:
Can you share the link in which sdcard is working??
Sent from my RAINBOW using XDA Free mobile app
Click to expand...
Click to collapse
Use this miui rom and update it with OTA it has no bugs
http://d-h.st/Pc2
QMobile i9 is now supported by MIUI India so visit to get latest updates
http://forum.miui.co.in/viewtopic.php?t=1492
For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui
qwerfaseeh said:
For the new taste of miui 6 use a theme called miui v6, search in the theme app of miui
Click to expand...
Click to collapse
i installed this lewa os v1 rom on i9 sim card not detect after restore imei can you please help
https://www.facebook.com/notes/myph...gua-rio-versions-v0-v1-and-v2/288315014697928
To restore imei you need to have busybox installed check that it has busybox installed or not and use latest version of MTK droid tools
Original QMobile i9 Rom
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!
Its already on post
AliZaib1 said:
Please Upload Q Mobile i9 Original(official) ROM with Default Ads-ons and everything Please Upload it!!
Click to expand...
Click to collapse
Next time search before you post anything. :banghead:
Sent from my SGH-T999 using XDA Free mobile app
It is on my 2nd post, the link of which is posted on first page named kitkat for noir i9
I tried this method to install customer recovery in i9. But now my mobile isn't going into recovery. When I press both volume and power buttons it shows option to go into recovery and factory mode but then mobile just turns on if I press volume button or not. Can any one guide how to get my recovery fixed for Q mobile i9?. Thanks in advance.
qwerfaseeh said:
This app requires root privileges, which means that your phone needs to be rooted. Busybox is also required, which can be obtained from PlayStore.
USE THIS APP TO...
Install TWRP for i9
Install CWMR for i9
Install stock recovery
HOW TO USE
Download the apk file
Install in your i9
Once installed, launch the app "RIO Recovery Installer"
Tap the recovery of your choice from the set of buttons
Confirm to Install
Reboot to recovery to test
Click to expand...
Click to collapse
Q&A for [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Flying Sparrow V3.0 { The Fastest ROM For Micromax a89 }. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
not working..after imstalling it reboot to recovery
not working..after imstalling it reboot to recovery..help
Follow the instructions carefully
sunilbagal said:
not working..after imstalling it reboot to recovery..help
Click to expand...
Click to collapse
1) Download the zip file from the download link provided below...
2) Extract the zip file....
3) You will find two zip files inside it,, first one is ROM zip and another is addons zip...
4) Copy both the zip files two your SDcard ..
5) Go to recovery mod and firstly take the nandroid backup and reboot...
6) Again go to recovery mod and wipe cache ,data ,system and dalvik cache flash the ROM zip only and reboot...
7) Then again go to recovery mod and flash the addon zip...
8) That's it ..now reboot your phone ....now fly with sparrow
---------- Post added at 06:28 AM ---------- Previous post was at 06:25 AM ----------
sunilbagal said:
not working..after imstalling it reboot to recovery..help
Click to expand...
Click to collapse
Do not flash the addon zip just after installing ROM .... A reboot is necessory after installing ROM and after a reboot then flash addon zip.. Also don't do any factory reset after installing both rom and addon zip.
And after this if again any problem occur then do inform me...
a complaint
My handset has been appearing white and then booting often, but it is not booting properly and it becoming white and then again booting as ninja..I don't know what to do...please help me Bro's....I can't use my headset ninja a89..;reply me soon... XDAXda
Finally sorry for my English...
I think you don't followed the instructions to install flying sparrow carefully... Please read the instructions first and strictly follow them.. And also use the cautions..
Also report me if it work
USB Mass storage not working
Hi
I have installed Flying Sparrow OS in my A89. But my USB mass storage function is not working. I cannot connect it as a media device or as a camera. It just gets charging when connected to my computer. How can I get out of this??? Thanks in advance..
solution
Karthik Bala said:
Hi
I have installed Flying Sparrow OS in my A89. But my USB mass storage function is not working. I cannot connect it as a media device or as a camera. It just gets charging when connected to my computer. How can I get out of this??? Thanks in advance..
Click to expand...
Click to collapse
Actually flying sparrow is completely bugless but if you are facing problem of usb ,do the following things for solution. Firstly install the rom zip only don't flash the addon zip and reboot .Then try to connect your phone to your computer. Then usb will work.. And after this try ,go to recovery mode and flash the addon zip.. And reboot. Don't do factory reset.. Now usb will work.. If any other problem occurs report me
Not Working in my A89
HI,
I downloaded your file, and transferred to SD card, I used CWM Recovery to install, after few steps , after opening update package...., installing update......, installation aborted. I tried the same 3 times and getting the same message. Kindly guide me to install your ROM in micromax A89.
venki
+91 9342519832
solution
vsmv said:
HI,
I downloaded your file, and transferred to SD card, I used CWM Recovery to install, after few steps , after opening update package...., installing update......, installation aborted. I tried the same 3 times and getting the same message. Kindly guide me to install your ROM in micromax A89.
venki
+91 9342519832
Click to expand...
Click to collapse
Installation is abroted because you are installing the wrong zip file...
You need to firstly extract the downloaded zip file and you will find the ROM zip inside it
Kindly follow the steps...
1) Download the zip file
2) Extract the zip file....
3) You will find two zip files inside it,, first one is ROM zip and another is addons zip...
4) Copy both the zip files two your SDcard ..
6) Go to recovery mod and wipe cache ,data ,system and dalvik cache flash the ROM zip only and reboot...
7) Then again go to recovery mod and flash the addon zip...
8) That's it ..now reboot your phone
Need Help
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Abhay S said:
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Click to expand...
Click to collapse
Everything is ok but between steps 1 and 2 you forget to extract zip file... After extraction you will find rom zip and addon zip.. You have to put these two zip files in your sdcard...
install fly sparrow in micromax a89 ninja
installation Steps For CWM 6 Users
Make Backup BEFORE Flashing
1.Download Flying sparrow v3.0
2.Put it on your SDcard
3:Go to CWM Recovery(Press Vol. Up Power
Button)
4.wipe cache partition
5. Format Data(Mounts And Storage>Scroll
Down>Format Data)
6. Format System(Mounts And Storage>Scroll
Down>Format System)
7. Format Dalvik Cache(Advanced>Dalvik
Cache)
8. Go back at the first page of the CWM
recovery and choose install .zip from SDcard
9.Choose
Flying sparrow v3.0.zip
10.then reboot and then again go to recovery and then go to again install zip from sd card and choose addon zip and flash it
11. then reboot and then again go to recovery and then go to again install zip from sd card and choose full kitkat white theme and flash it
12.Then reboot system now
I am using this method for install flying sparrow v3.0 in Micromax a89 ninja this method is right or not please tell me flying sparrow v3.0 developers fast
Installation steps updated
Steps for installing rom properly are updated now and explained properly for cwm and twrp users individually in the discussion page.....:d
regarding xblast tools
Flying sparrow is the best rom i have used till now. the only thing that i want to ask is how to change the background image of apps like settings, contacts,phone.
Secondly,certain changes made in xblast tools like of quick settings do not get implemented.how do i do that?
And finally, everytime i open Ex themer & select the theme option it says no data found. How do i theme my phone.
I use a micromax a89 ninja.
Thank you
Solution
Pbm12345 said:
Flying sparrow is the best rom i have used till now. the only thing that i want to ask is how to change the background image of apps like settings, contacts,phone.
Secondly,certain changes made in xblast tools like of quick settings do not get implemented.how do i do that?
And finally, everytime i open Ex themer & select the theme option it says no data found. How do i theme my phone.
I use a micromax a89 ninja.
Thank you
Click to expand...
Click to collapse
For changing the background wallpapers of apps you need to decompile them.. There are many tutorials available on xda ,kindly follow them..
Quick settings will not work work on flying sparrow as quick setting will only work for jb.. You can try to install them but i know that this feature will not work for an ics based rom.. Proceed to post no.2 in the discussion thread of flying sparrow for installing xposed framework.. Also i have provided the list features of xblast tools which are tested and work perfectly on flying sparrow.. If follow the procedure in post 2 correctly you will successfully work with exthemer... You need to select exthemer in the module list of xposed installer.. And reboot.. I hope this will help you and give answers to you your questions... Also participate in poll in flying sparrow thread...
Error
Hey,there is problm after reboot......
it does not go further after boot animation..
plz help me out....
How to remove transparency in each view
Hi Preet,
I have installed your ROM, on MMX A89 just few minutes before, and it looks nice.
I have some questions and main is I DO NOT want Transparent background in any case.
How do I achieve that in your ROM? I do not like transparent background.
Please help me for this.
Note: I will wait for 1 day otherwise I will restore my old backup (ICS 4.0.4 company look). And what you had said about battery saver? What bug it has for battery?
Thanks in advance.
As it was a challenge @rohitsinghpu, here is MY 7th PORTED ROM for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiUi7_v5.10.15 by Sachin.zip in sd card.
2) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
3) If you are on MiUi ROM, Wipe Cache, Dalvik Cache, Android Secure using Advanced Wipe, else perform Full Wipe.
4) Install MiUi7_v5.10.15 by Sachin.zip
5) Wipe Cache & Dalvik Cache & Reboot.
9) Phone will get upgraded to newer version, without losing any data.
10) If u face any problem or want to flash as clean install, then wipe data as well as system, alongwith Dalvik & Cache, before flashing rom.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) MIUI Video as default media player
6) WiFi Direct working
7) Advanced power menu
8) Custom Boot Logo
9) Full changelog at: http://en.miui.com
Bugs:
Nearly Bugless ROM, few minor bugs are as follows:
1) Some of the Icons missing when using default theme(Change the theme).
2) Report, if you found any.
Note:
For Engineer Mode, dial *#*#3646633#*#*,
Download Links:
1) MiUi7_v5.10.15 Full ROM
All the Best, Guys......
Screenshots:
https://drive.google.com/open?id=0B9c3NsdJ2PscTlE2WVJid2lwX3c
Updates:
If you are using TWRP, Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
Also, if you are on twrp or any other recovery, you can update as follows:
reboot to recovery and flash ota.zip, wipe cache & dalvik, reboot.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Bug Fixes:
Great work bro, i ws missing wsm tool as it ws not compatible with roith bro port, it gave fc n random reboot, i tried many wsm version, then fount it ws instability in rom, ( sorry no offense roith bro, u did ur best and im thankfull to u)
Sachin bro, i always look forward to ur work?
Thanks fr making update easyy, downloading now, will review later
sachin.r.fulzele said:
Updates:
Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Click to expand...
Click to collapse
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
iaditya91 said:
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Click to expand...
Click to collapse
U must be on twrp to update in the mentioned way. If u r on any other recovery, flash as a normal zip from recovery.
Jagadish-ravi said:
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
Click to expand...
Click to collapse
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
sachin.r.fulzele said:
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
Click to expand...
Click to collapse
Awesome bro :thumbup::thumbup:
Does security and cleaner app works fine or still has reboot issues...
Inbuilt browser fc..
This is a stable rom with good user interface .
WARNING
THIS MAY VOID UR WARRANTY OR MAY BRICK UR PHONE SO,INSTALL THIS ROM ON UR OWN RISK.
PRE-REQUISTES.
1.ROM ZIP FILE. (FROM THE LINK GIVEN BELOW) .
2.CUSTOM RECOVERY INSTALLED.(I PREFERR TWRP RECOVERY).
3.GAPPS 32 BIT LOLLIPOP 5.0.x.
Method of installing.
1.place the downloaded rom and gapps zip file in ur external sd card.
2.Then go to recovery mode.
3.select wipe.
In wipe select advanced
In advanced select dalvik cache,cache,system and data.
4.after wiping go back and select install.
5.and select the rom.zip file from ur sdcard which u have downloaded.
6.and leave it untill it installed in ur device.
7. Once installed, then reboot system.
When rebooting it says"NO OS INSTALLED" .
BUT DONT WORRY SWIPE TO REBOOT AND THEN REMOVE UR BATTERY AND AFTER 5 SECONDS REINSERT UR BATTERY AND POWER ON UR DEVICE.
8. Done!!!! .
9.Now again reboot ur device into recovery mode and now install gapps and reboot ur device...
10. U have vibe 2.5 installed in ur lenovo a6000/plus.
Rom link:- https://userscloud.com/2dkg9t4ogsmm
Gapps link:- http://opengapps.org/?download=true&arch=arm&api=5.0&variant=pico
Rom credit :-techolite.
Android version:- 5.0.2
32 bit architecture.
No bugs reported so far.
Screenshot copy to direct techolite!!
1st use & share .. .
This rom all are know abouy that
Vibe ui
Emui
Color os
Funtouch
Cararoot & teholite site .
meet8823 said:
Screenshot copy to direct techolite!!
1st use & share .. .
This rom all are know abouy that
Vibe ui
Emui
Color os
Funtouch
Cararoot & teholite site .
Click to expand...
Click to collapse
I used this rom but didnt take any screenshot thats why i have to put direct screenshot from techolite
is it better than stock lollipop?
sanjeevkp90 said:
is it better than stock lollipop?
Click to expand...
Click to collapse
Yes....
It has nice system animation and themes store too...
any bugs and jio work fine or not like data toggle issues?
No bugs reported so far as i posted in my op
It would be good if it was 5.1.1
Then u should try vibe ui 2.9
But it has some bugs
Confirm 64 bit & need gapps?
meet8823 said:
Confirm 64 bit & need gapps?
Click to expand...
Click to collapse
No it is not 64 bit.... It is 32 bit.... And u have to install 32 bit gapps...
64 bit gapps doesnt install try..
And let me know
I am currently using this ROM. I love the interface! Although it has some issues with its kernel but somehow I managed to tweak it.
Sir rom file is not available ...please give me new link
File not available help...
What is average free ram available in this ROM?
The link is not working: (
Bad link?
Bad link ??
Pls update link
update link sir
Want to know that if this rom contain system.img or maybe system folder pls tell
Want to know that if this rom contain system.img or maybe system folder pls tell I want to install sytem.img via fastboot because my Lenovo a6000 us bricked pls help
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
sujon3903 said:
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
Click to expand...
Click to collapse
Nice one, Man. If you need some help, I am here.
Does this work on LUA-U23?
DiegoxG said:
Does this work on LUA-U23?
Click to expand...
Click to collapse
This ROM, is developed by dev on android latino org. So you can ask the dev, Does this ROM can be used on U23.
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
viper7144 said:
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
Click to expand...
Click to collapse
Can you give screenshot and logcat?
will this remove huawei apps like huawei backup??
drkpntr said:
will this remove huawei apps like huawei backup??
Click to expand...
Click to collapse
Well, Installing custom ROM will remove official features like cloud storage, device account, system data, and user data.
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
drkpntr said:
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
Click to expand...
Click to collapse
I think huawei backup will not work properly, because Huawei system use huaweisdk and sync data to account. If you do that, the apps will force close, because Not all custom ROM have same process. Example, you are installing huawei backup, This mean the huawei backup cant work properly(force close) or else. You need a SDK to run huawei system apps. (Like MIUI from Xiaomi)
---------- Post added at 10:50 AM ---------- Previous post was at 10:45 AM ----------
If you want to try please backup your data and system. And Try to install huawei backup. if the apps force close. You can go back to your previous ROM
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
pojunkampar said:
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
Click to expand...
Click to collapse
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Reed_405 said:
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Click to expand...
Click to collapse
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
pojunkampar said:
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
Click to expand...
Click to collapse
Before trying to install this ROM, you must follow the order first.
1. Unlock Bootloader
2. Installing Philz/CWM/TWRP
3. Do wipe
4. Install the ROM, SuperSU, and other stuff
5. Reboot system
6. Wait 5-10 minutes
7. Enjoy
Why is my phone stuck on start after flashing the Rom .
Sandip Rai said:
Why is my phone stuck on start after flashing the Rom .
Click to expand...
Click to collapse
Have you follow the instruction?
The link is down.... Anyone please give new download link
aroien said:
The link is down.... Anyone please give new download link
Click to expand...
Click to collapse
Okay, since the owner didnt active to reply this message. So I would like to say that this is like disbanded. If I have time I ll give the link. Please wait.
Link not Working
Link not Working
Download Link.........
Cyanogenmod 12.1 Custom Rom please give me the download link..