Database Info

[Q] I need a logging app to figure out what's occupying my camera.

I'm in a bit of a pickle. At some point in the last week I did something or put something on my phone that's now occupying my camera and preventing me from recording anything. Pictures still work. Whether this means something is recording, I don't know. I disabled the camera with another app, but that's no solution.
I'm not rooted. I need an app that can log at some level what apps are using my camera so that I can uninstall the offending app. My wifi also recently started disabling itself during use, and I can't figure that out either. If you know of something that can inform me on both problems, please do pass that my way. I've been unsuccessful on my end so far in my search.
I just don't have enough information to troubleshoot these issues, the only viable option I have atm is a factory reset, and that's not a solution, it's just a shortcut.

Toastly said:
I'm in a bit of a pickle. At some point in the last week I did something or put something on my phone that's now occupying my camera and preventing me from recording anything. Pictures still work. Whether this means something is recording, I don't know. I disabled the camera with another app, but that's no solution.
I'm not rooted. I need an app that can log at some level what apps are using my camera so that I can uninstall the offending app. My wifi also recently started disabling itself during use, and I can't figure that out either. If you know of something that can inform me on both problems, please do pass that my way. I've been unsuccessful on my end so far in my search.
I just don't have enough information to troubleshoot these issues, the only viable option I have atm is a factory reset, and that's not a solution, it's just a shortcut.
Click to expand...
Click to collapse
The same thing happened to me, Turned out Google Now was causing the problem however It's been resolved now for me as i have it enabled again

Allowing "Google Now" voice detection "From Any Screen" seems to be the culprit. Set "From Any Screen" to off to take videos.

Hussain_Salam said:
The same thing happened to me, Turned out Google Now was causing the problem however It's been resolved now for me as i have it enabled again
Click to expand...
Click to collapse
It doesn't seem to have been fixed for me yet. I just verified that's the cause, that's a relief. I really like that feature, how unfortunate.
My wifi hasn't been disabling itself today, but how would I troubleshoot it when it does? It's a really annoying problem, I don't tend to use data.

Toastly said:
It doesn't seem to have been fixed for me yet. I just verified that's the cause, that's a relief. I really like that feature, how unfortunate.
My wifi hasn't been disabling itself today, but how would I troubleshoot it when it does? It's a really annoying problem, I don't tend to use data.
Click to expand...
Click to collapse
I'm not entirely sure what's causing your WiFi problem, However to see if you can recover the Google now feature make sure your device is up-to-date and your app is up-to-date, Have you tried Rebooting the device :/ Really Not sure on the Wi-Fi buddy

Hussain_Salam said:
I'm not entirely sure what's causing your WiFi problem, However to see if you can recover the Google now feature make sure your device is up-to-date and your app is up-to-date, Have you tried Rebooting the device :/ Really Not sure on the Wi-Fi buddy
Click to expand...
Click to collapse
Thank you, I'll post a separate thread if it reappears. My phone locks itself whenever my wifi is disabled or I'm disconnected from my home network, so it's quite annoying. Much thanks for everyone's help.

[Q] Google Maps GPS Not working

This problem is starting to get really annoying. Recently i did a clean flash of cataclysm with code blue kernel, and i remember even on stock lollipop on my other nexus 5, there were no gps issues. This is an RMA unit which i have had for a little over a month now and today i desperately needed GPS cause i was lost...literally.
With 4g and gps it couldnt find me...crap
I have done everything, booted in safe mode, tried calibrating gps, rebooting, reinstalling google maps, everything. Every gps fixing app knows my exact location within seconds of turning on gps. literally, i live out in the country where there aren't many obstacles to obstruct the gps, im in my basement with 2 floors on top of me and STILL those apps find my location no problem. But GOOGLE ****ing MAPS cant find me! Its specifically google maps, everything else uses gps just fine.
any ideas what on earth to do?

I called google and they just offered to replace it. And i desperately dont want to go through that hassle again.
EDIT:
What ive done so far
1. tried safe mode and safe mode recalibration
2. tried factory reset
3. tried reflashing rom and kernel
4. flashing kitkat modems
5. using gps fixing apps

fixed it.
in App Ops on cataclysm rom i enabled location for oogle play services.
It looks like the issue is in play services and not gps

russian392 said:
fixed it.
in App Ops on cataclysm rom i enabled location for oogle play services.
It looks like the issue is in play services and not gps
Click to expand...
Click to collapse
Hi, can you give me the procedure that you have follow?
I've the same problem

Edogolf said:
Hi, can you give me the procedure that you have follow?
I've the same problem
Click to expand...
Click to collapse
In my ROM, I have option to control each apps individual permissions. (I think you can get "app ops" with xposed. Its built into cataclysm ROM).
I simply went to 'android system' and 'google play services' and enabled location access.

russian392 said:
In my ROM, I have option to control each apps individual permissions. (I think you can get "app ops" with xposed. Its built into cataclysm ROM).
I simply went to 'android system' and 'google play services' and enabled location access.
Click to expand...
Click to collapse
Thanks for your reply, this afternoon I tryied to flash the original SW and hope that this operation can solve my problem...
I'm not an expert and I prefer to use the original ROM, however I've all the option for the geolocation access available and setting on "YES"

Edogolf said:
Thanks for your reply, this afternoon I tryied to flash the original SW and hope that this operation can solve my problem...
I'm not an expert and I prefer to use the original ROM, however I've all the option for the geolocation access available and setting on "YES"
Click to expand...
Click to collapse
Good luck

russian392 said:
Good luck
Click to expand...
Click to collapse
Nothing happend... I've flash my cell but google maps doesn't work fine
I'll try next week to call the LG service and hope to solve this problem. Otherwise I'll change my phone with another brand.

Edogolf said:
Nothing happend... I've flash my cell but google maps doesn't work fine
I'll try next week to call the LG service and hope to solve this problem. Otherwise I'll change my phone with another brand.
Click to expand...
Click to collapse
Idk google should replace it no questions asked. I'd call them first.

Do the NatWest and RBS apps now reject rooted/failed Safety Net users?

The latest updates to these apps on the 18th and 19th of June 2018 produce "Error 04 Security Check failed" at launch. Dismissing the message exits the app.
Rolling back to the previous versions of the apps or even a year old version fixes the problem (for now).
Are these apps finally rejecting 'insecure' devices?

I've got the same error.
It was working this morning but root was disabled as I had done a software update a few days ago and not reinstalled magisk.
Installed 05.09.0000.43.0 May 14, 2018 from apkmonk and I can login again.
Every week I'm almost finding more reasons to give up on rooting. I only use it for a few convenience things mainly but they are so useful. I couldn't have a phone without online banking though...

Just point your stock web browser at nwolb.com.

intrepidis said:
Just point your stock web browser at nwolb.com.
Click to expand...
Click to collapse
Not really the same though? The login process takes longer, the information isn't as nicely formatted etc..

roll back to the previous update.
jeffbesoz said:
Agree with you. :good::good:
Click to expand...
Click to collapse
If you use natwest current version you will get this error if you are rooted - I tried using magisk and hide root but that did not work.
use natwest app version V05.03.0001.125.0 this one will not detect root but it is not as secure as the latest version
https://natwest.en.aptoide.com/?store_name=monadiva&app_id=30626821

I spoke to Natwest support about this and got a call back from one of their techies... he stated that the error message was not from the Natwest app, but from Android itself... this could mean (if true) that Natwest isn't checking for root, but offloading the check onto Google Pay, which in turn gives the error 04...

shayraz said:
I spoke to Natwest support about this and got a call back from one of their techies... he stated that the error message was not from the Natwest app, but from Android itself... this could mean (if true) that Natwest isn't checking for root, but offloading the check onto Google Pay, which in turn gives the error 04...
Click to expand...
Click to collapse
Interesting..
I also saw that they are now saying that finger print logins will not work unless you update. Can't do fingerprint anyway because of root etc..

Update: I received a text message saying that older versions of the app will no longer work in 30 days.
You are using an old version of our app which we will be switching off in 30 days. To continue to use our Mobile Banking app, you will need to update your phones operating system to 6.0 and visit your app store to update to the latest version of our app. If you are unable to update your phones operating system, you can continue to use Online Banking as an alternative.
Click to expand...
Click to collapse
The most recent version of the app (Dec-3rd-2018, 05.14.0000.63.0) continues to give the aforementioned error message. In the meantime, I will continue to use version 05.14.0000.36.0.
It would be nice for Natwest to give an official statement on this.

htr5 said:
Update: I received a text message saying that older versions of the app will no longer work in 30 days.
The most recent version of the app (Dec-3rd-2018, 05.14.0000.63.0) continues to give the aforementioned error message. In the meantime, I will continue to use version 05.14.0000.36.0.
It would be nice for Natwest to give an official statement on this.
Click to expand...
Click to collapse
I've not received a text but keep getting a popup when I login...
Not sure what version I'm on though ... no idea what will do if it stops working

I had the same problem too. I have figured out that the incompatibility seems not to be with root but with Xposed.
The app works with root enabled, it does not when Xposed is on.
Here how I managed to make it work:
I uninstalled the app, disabled root from my settings, turned off Xposed, restarted the phone and then installed the app again.
The RBS app worked perfectly, also with root on, until I re-enabled Xposed. Once I enable Xposed, I get the Error 04 message.
It works again every time I disable Xposed and restart the phone. It is a bit of a workaround but it works, and luckily it is not an app I use every day.
I am on an S5 with Lineage 15.1.

I can also confirm the issue is with xposed. If you turn off xposed from the installer and an then reboot, the app banking app will work fine.
I have tried installing NatWest in the work profile using the Islands app but it didn't work. The Sudohide xposed module also didn't work. There are no relevant permissions in the NatWest app that can be revoked.

Maybe something similar to DBXposed module could be a workaround?
https://forum.xda-developers.com/xposed/modules/dbxposed-bypass-root-xposed-detection-t3536406
I have no experience in compiling or programming though

I suppose if you turn off Xposed from the installer all of the xposed modules stop working?
Got my 29 day count down now before this version of Natwest stops working .. ugh ... theres just a few simple things I have on Xposed but they make the phone so much better.. e.g. Xinsta and ChromePie

oli356 said:
I suppose if you turn off Xposed from the installer all of the xposed modules stop working?
Got my 29 day count down now before this version of Natwest stops working .. ugh ... theres just a few simple things I have on Xposed but they make the phone so much better.. e.g. Xinsta and ChromePie
Click to expand...
Click to collapse
I have systemless Xposed installed meaning that it can be disabled really easily from within the app. A soft reboot keeps some of my modules to continue working such as the cosmetic tweaks.
The reboot process takes about 45 seconds each way but I'm finding myself using the browser website for quick transfers anyway.

Hi guys, i was researching a bit how to make natwest app working along with magisk and edxposed, i found that adding natwest to edxposed blacklist did the job, since i saw natwest has an activity looking for hooks...
As simple fingerprint works
Of course also box checked in magisk hide

pincopallowfs said:
Hi guys, i was researching a bit how to make natwest app working along with magisk and edxposed, i found that adding natwest to edxposed blacklist did the job, since i saw natwest has an activity looking for hooks...
As simple fingerprint works
Of course also box checked in magisk hide
Click to expand...
Click to collapse
Frustratingly this doesn't work for me.

Brig1979 said:
Frustratingly this doesn't work for me.
Click to expand...
Click to collapse
Have you cleared natwest data app before?
After set natwest in magiskhide and set natwest in edxposed blacklist can try to clean dalvik and reboot...
It's kinda strange indeed, on my tablet lenovo running aospextended natwest works outofthebox without doin nothing apart from set it into magiskhide, on mi mix3 it worked only after setting it into magiskhide and edxposed blacklist.... It should work as well putting magisk into core mode, but no modules get loaded, so you need reboot, use natwest and then reboot again to reload modules...

pincopallowfs said:
Have you cleared natwest data app before?
After set natwest in magiskhide and set natwest in edxposed blacklist can try to clean dalvik and reboot...
It's kinda strange indeed, on my tablet lenovo running aospextended natwest works outofthebox without doin nothing apart from set it into magiskhide, on mi mix3 it worked only after setting it into magiskhide and edxposed blacklist.... It should work as well putting magisk into core mode, but no modules get loaded, so you need reboot, use natwest and then reboot again to reload modules...
Click to expand...
Click to collapse
Completely forgot to answer this, but i'd tried literally everything!
Updated the natwest app last night and it's now working again (I do still have it added to the the blacklist in Edxposed, and magisk hide set)

I also updated to 05.18.0000.85.0 and it is working now with xposed and root. I am not using any masking tools.

Updated to latest version today as it said app would stop working in couple of days. With magisk hide on and xposed disabled I still get an error and can't login.

User Data and Cache = 0?

I finally loaded the May factory image on my unlocked and Magisk rooted 3 a couple weeks back, and I noticed that every single app now reports user data and cache as 0 when I bring up app info. Makes it difficult to troubleshoot apps short of completely uninstalling them. Has anyone else seen this issue, and have you found a fix? I'm trying to wait a few days before getting the June update, just because there have been a few problems with the last couple updates and Magisk, I'd like to know if my 10 minute task will end up taking me an hour or more.

scooter1979 said:
I finally loaded the May factory image on my unlocked and Magisk rooted 3 a couple weeks back, and I noticed that every single app now reports user data and cache as 0 when I bring up app info. Makes it difficult to troubleshoot apps short of completely uninstalling them. Has anyone else seen this issue, and have you found a fix? I'm trying to wait a few days before getting the June update, just because there have been a few problems with the last couple updates and Magisk, I'd like to know if my 10 minute task will end up taking me an hour or more.
Click to expand...
Click to collapse
are you using magisk systemless host module/magisk hide? if yes then flash below/kirisakura kernel which should fix the issue
https://forum.xda-developers.com/showpost.php?p=79658098&postcount=1774

SacredDeviL666 said:
are you using magisk systemless host module/magisk hide? if yes then flash below/kirisakura kernel which should fix the issue
https://forum.xda-developers.com/showpost.php?p=79658098&postcount=1774
Click to expand...
Click to collapse
From what I heard the other day when I posted about the grayed out clear cache/data in Google Play Store, Freak07 doesn't even know what he did that fixed the issue. Do you have more information about how it was resolved? I'd hate to be limited to one kernel that fixes the issue without reason (when obviously many of us use others for other reasons).

sliding_billy said:
From what I heard the other day when I posted about the grayed out clear cache/data in Google Play Store, Freak07 doesn't even know what he did that fixed the issue. Do you have more information about how it was resolved? I'd hate to be limited to one kernel that fixes the issue without reason (when obviously many of us use others for other reasons).
Click to expand...
Click to collapse
It's something to do with pixel's f2fs partitions and Magisk so its not a kernel issue to be addressed by kernel devs
https://github.com/topjohnwu/Magisk/issues/1109#issuecomment-499181858
Yeah apparently only @Freak07 kernel fixes the issue caused by magisk/pixel parition.
ElementalX is close to stock and he won't deviate from it and which is good too. Probably @flar2 would know what is the difference?

SacredDeviL666 said:
It's something to do with pixel's f2fs partitions and Magisk so its not a kernel issue to be addressed by kernel devs
https://github.com/topjohnwu/Magisk/issues/1109#issuecomment-499181858
Yeah apparently only @Freak07 kernel fixes the issue caused by magisk/pixel parition.
ElementalX is close to stock and he won't deviate from it and which is good too. Probably @flar2 would know what is the difference?
Click to expand...
Click to collapse
I appreciate the reply. It's not a huge issue for me, but you guessed it that I use ElementalX. I just have to disable the Edge Sensor module if I need to clear data/cache in Google Play Store (typically once a month to get Play Store to show the devices as certified).

sliding_billy said:
I just have to disable the Edge Sensor module if I need to clear data/cache in Google Play Store (typically once a month to get Play Store to show the devices as certified).
Click to expand...
Click to collapse
THAT'S the quick fix that I was looking for. Thanks.

scooter1979 said:
THAT'S the quick fix that I was looking for. Thanks.
Click to expand...
Click to collapse
Haha, no problem.

Question Pixel 7 can't pass safetynet

Hello,
I have an unlocked, rooted Pixel 7, Android 13 panther. My device is rooted, and the bootloader is unlocked. I have Magisk 25.2 installed with Zygisk and enforce denylist active.
I cannot seem to get my device to pass SafetyNet. I use YASNAC and am continually getting a CTS profile Match Fail.
I have installed the magisks modules, Universal SafetyNet fix, and Magisk Hide Props Config.
I cannot figure out a sequence of options using Hide Props Config that will get me to pass SafetyNet.
Is there anyone who might have any suggestions?

i have the exact same issue

captain_howdy said:
Hello,
I have an unlocked, rooted Pixel 7, Android 13 panther. My device is rooted, and the bootloader is unlocked. I have Magisk 25.2 installed with Zygisk and enforce denylist active.
I cannot seem to get my device to pass SafetyNet. I use YASNAC and am continually getting a CTS profile Match Fail.
I have installed the magisks modules, Universal SafetyNet fix, and Magisk Hide Props Config.
I cannot figure out a sequence of options using Hide Props Config that will get me to pass SafetyNet.
Is there anyone who might have any suggestions?
Click to expand...
Click to collapse
dangercl0se said:
i have the exact same issue
Click to expand...
Click to collapse
you both need to check out the post below (or better yet, get from his Github) and use Displax's updated mod to Universal SafetyNet fix. The original USNF hadn't worked with the Pixel 6 (or Pixel 7), where his original mod worked and passed everything but Strong Integrity. Then, when it came to the Pixel 7 Pro, he needed to mod it again and we all have been using his mod_2.0 to get things to work.
Of course, after applying the module and putting Google Play Store, Google Services Framework, & Google Play Protect Service in the Denylist (every entry in its subdirectory ticked), be sure to clear data from them to make sure you get the best chance at passing safetynet...
MAGISK MODULE ❯ Universal SafetyNet Fix 2.4.0
Universal SafetyNet Fix Magisk module Magisk module to work around Google's SafetyNet attestation. This module works around hardware attestation and recent updates to SafetyNet CTS profile checks. You must already be able to pass basic CTS...
forum.xda-developers.com

simplepinoi177 said:
you both need to check out the post below (or better yet, get from his Github) and use Displax's updated mod to Universal SafetyNet fix. The original USNF hadn't worked with the Pixel 6 (or Pixel 7), where his original mod worked and passed everything but Strong Integrity. Then, when it came to the Pixel 7 Pro, he needed to mod it again and we all have been using his mod_2.0 to get things to work.
Of course, after applying the module and putting Google Play Store, Google Services Framework, & Google Play Protect Service in the Denylist (every entry in its subdirectory ticked), be sure to clear data from them to make sure you get the best chance at passing safetynet...
MAGISK MODULE ❯ Universal SafetyNet Fix 2.4.0
Universal SafetyNet Fix Magisk module Magisk module to work around Google's SafetyNet attestation. This module works around hardware attestation and recent updates to SafetyNet CTS profile checks. You must already be able to pass basic CTS...
forum.xda-developers.com
Click to expand...
Click to collapse
the 2.0 file worked for me, i get CTS pass now
but cannot hide root from Citibank app though. any chance you may know a fix? or the citibank guys are that good?

I vey same issue with my bank app Bt Pay. Only reason i cant stay rooted.

dangercl0se said:
the 2.0 file worked for me, i get CTS pass now
but cannot hide root from Citibank app though. any chance you may know a fix? or the citibank guys are that good?
Click to expand...
Click to collapse
Need Shamiko. Set apps in deny list but don't enforce the deny list.

LLStarks said:
Need Shamiko. Set apps in deny list but don't enable the deny list.
Click to expand...
Click to collapse
Unless the app is even "smarter". Like my own bank app.

dangercl0se said:
the 2.0 file worked for me, i get CTS pass now
but cannot hide root from Citibank app though. any chance you may know a fix? or the citibank guys are that good?
Click to expand...
Click to collapse
I was having trouble with Chase a while back. What I did was clear the banking app's cache/data, enable airplane mode, and reboot after passing safetynet adding the banking app to DenyList. I was then able to log in and successfully hide root from the app. Good luck!

LLStarks said:
Need Shamiko. Set apps in deny list but don't enforce the deny list.
Click to expand...
Click to collapse
still doesn't work, citibank can detect magisk (which was hidden) before i login lol

dangercl0se said:
the 2.0 file worked for me, i get CTS pass now
but cannot hide root from Citibank app though. any chance you may know a fix? or the citibank guys are that good?
Click to expand...
Click to collapse
I use the Citibank app myself and am able to get it to work. You gotta make sure that everything under its sub-directory is ticked as well -- just checked and there's 4 entries in its subdirectory that needs to be ticked. Another thing that might help is to Click Hide the Magisk app; when you hide it, you'll have the optional opportunity to change the Magisk app's name to whatever you wish. Also, you can do what kornball said below as that's also a good idea as well.
kornball said:
I was having trouble with Chase a while back. What I did was clear the banking app's cache/data, enable airplane mode, and reboot after passing safetynet adding the banking app to DenyList. I was then able to log in and successfully hide root from the app. Good luck!
Click to expand...
Click to collapse

Try to use Ice Box app and freeze magisk, then see if banking app works. I had to do that on my last phone. You can easily open magisk by opening ice box app first.

Weird stuff, folks. I imagine that something else is being done amiss as I have a similar setup and don't have any safetynet issues that affect the access to my banking apps/GPay/Prime Video/etc.
I don't even use Displax's USNF mod. Heck, I barely even use the denylist.
I would suggest that you wipe the device clean, re-image it with the latest A13 build, re-root and then set everything up again. But this time, do not install the Magisk Hide Props. That is only needed for those on custom ROMs (which I imagine you aren't using).

dangercl0se said:
still doesn't work, citibank can detect magisk (which was hidden) before i login lol
Click to expand...
Click to collapse
Did you enable Zygisk?
I'm honestly having trouble with Chase at the moment. Usually I'm able to hide Magisk enough to get fingerprints working.

The Citi app doesn't work for me either, despite all other workarounds, and everything else works other than setting the fingerprint reader for use with the Chase app (but that can be worked around while temporarily not rooted). I'll just use the Citi website if I need to.
LLStarks said:
Did you enable Zygisk?
I'm honestly having trouble with Chase at the moment. Usually I'm able to hide Magisk enough to get fingerprints working.
Click to expand...
Click to collapse
I forgot to set the fingerprint before I rooted when I updated the firmware, but I'm just going to try to remember to do it on the next firmware update, hopefully. I never found any other workaround that always works.

roirraW edor ehT said:
The Citi app doesn't work for me either, despite all other workarounds, and everything else works other than setting the fingerprint reader for use with the Chase app (but that can be worked around while temporarily not rooted). I'll just use the Citi website if I need to.
I forgot to set the fingerprint before I rooted when I updated the firmware, but I'm just going to try to remember to do it on the next firmware update, hopefully. I never found any other workaround that always works.
Click to expand...
Click to collapse
For Chase, here's how I got it to work on my P6 previously. There's an old thread where someone installed a downgraded version, but I didn't need to do that:
I force stopped the app and cleared cache/data. I then enabled airplane mode, went into the Chase app and entered my credentials. I hit the fingerprint option and hit "sign on." I got the error saying no data connection available. I reenabled data and signed on.

kornball said:
For Chase, here's how I got it to work on my P6 previously. There's an old thread where someone installed a downgraded version, but I didn't need to do that:
I force stopped the app and cleared cache/data. I then enabled airplane mode, went into the Chase app and entered my credentials. I hit the fingerprint option and hit "sign on." I got the error saying no data connection available. I reenabled data and signed on.
Click to expand...
Click to collapse
I've tried that before on my Pixel 6 Pro and it didn't work. I just tried it again, exactly as you said, and it didn't work for me this time either. I'm glad it works for you. It's no big deal for me to do it while unrooted - just too lazy to unroot until I have to manually update the firmware anyway.
The downgrade app solution worked for a short while, but the app requires that it's reasonably up to date to work at all, so that option was never for the long term.

kornball said:
For Chase, here's how I got it to work on my P6 previously. There's an old thread where someone installed a downgraded version, but I didn't need to do that:
I force stopped the app and cleared cache/data. I then enabled airplane mode, went into the Chase app and entered my credentials. I hit the fingerprint option and hit "sign on." I got the error saying no data connection available. I reenabled data and signed on.
Click to expand...
Click to collapse
This unfortunately did not work for me. I pass safetynet and have magisk hidden as well as Chase on the deny list with all the ticks selected.

roirraW edor ehT said:
The Citi app doesn't work for me either, despite all other workarounds, and everything else works other than setting the fingerprint reader for use with the Chase app (but that can be worked around while temporarily not rooted). I'll just use the Citi website if I need to.
I forgot to set the fingerprint before I rooted when I updated the firmware, but I'm just going to try to remember to do it on the next firmware update, hopefully. I never found any other workaround that always works.
Click to expand...
Click to collapse
I can't believe you and dangercl0se haven't gotten Citi app to work!!! You, the creator the the quintessential guide of whom I followed step by step to get my root working, are having troubles with it when I haven't done anything particular or different than you would have done?! Doesn't seem right to me....i'm baffled as to why things are seamless for some people are are stubborn/difficult for others....

simplepinoi177 said:
you both need to check out the post below (or better yet, get from his Github) and use Displax's updated mod to Universal SafetyNet fix. The original USNF hadn't worked with the Pixel 6 (or Pixel 7), where his original mod worked and passed everything but Strong Integrity. Then, when it came to the Pixel 7 Pro, he needed to mod it again and we all have been using his mod_2.0 to get things to work.
Of course, after applying the module and putting Google Play Store, Google Services Framework, & Google Play Protect Service in the Denylist (every entry in its subdirectory ticked), be sure to clear data from them to make sure you get the best chance at passing safetynet...
MAGISK MODULE ❯ Universal SafetyNet Fix 2.4.0
Universal SafetyNet Fix Magisk module Magisk module to work around Google's SafetyNet attestation. This module works around hardware attestation and recent updates to SafetyNet CTS profile checks. You must already be able to pass basic CTS...
forum.xda-developers.com
Click to expand...
Click to collapse
Did all this, still failing for me.

Beefheart said:
Did all this, still failing for me.
Click to expand...
Click to collapse
I can only assume you mean passing safetynet and not getting the banking apps to work....
Only thing left that I can think of that I didn't include in that post is to make sure you have "systemless hosts" module installed as well; i know it's pretty obvious but just trying to cover all the bases....
If so and still failing, I suggest going to roirraW "edor" ehT's guide/thread -- it's probably the most active thread on this forum and is where many is bringing up their failing to pass it while going through all the steps...
*there's also Homeboy76's guide HERE if it's clearer/easier to follow for you...
unfortunately there's no real debug logs to state why it's not working out, so the best that I can suggest is that you're going to have be a lot more descriptive on what & how you "did all this" with luck that that'll show something you may have missed and/or start from scratch and follow each and every step exactly of roirraW "edor" ehT's/Homeboy76's guide and hope it works out that way.
Good luck to you and I hope this helps...