Hello all.
i have a samsung galaxy sIII at&t version i747
i have it rooted and i have PhilZ Touch 6 Recovery installed.
i flashed the " [ROM] [5.0] Samsung Galaxy S3 [d2att] [Nightly] LiquidSmooth " build
this build works fine but i would like to install " [ROM] [5.0] CM12 D2att Alpha Builds [12/12] "
in the instructions they keep mentioning the " NE4 " baseband ; however i noticed i have a later baseband version " I747UCUFNJ1 "
i would like to install CM12 rom but would like to know if this is going to be an issue.
any help would be appreciated.
xobus1970 said:
Hello all.
i have a samsung galaxy sIII at&t version i747
i have it rooted and i have PhilZ Touch 6 Recovery installed.
i flashed the " [ROM] [5.0] Samsung Galaxy S3 [d2att] [Nightly] LiquidSmooth " build
this build works fine but i would like to install " [ROM] [5.0] CM12 D2att Alpha Builds [12/12] "
in the instructions they keep mentioning the " NE4 " baseband ; however i noticed i have a later baseband version " I747UCUFNJ1 "
i would like to install CM12 rom but would like to know if this is going to be an issue.
any help would be appreciated.
Click to expand...
Click to collapse
Hi Xobus,
The banseband is completely apart of rom mechanism. So basically you can flash any rom. As they mention NE4 modem/bootloader and you have later one, yes you can flash it.
And I strongly suggest you to make some backups before in case you need to rollback.
Thank you for your reply
thats good to know.
i really dont want to wind up softbricking my phone or worse.
and yes i learned from my older android flashing adventures to always make a backup.
(actually i have that backup saved to my pc just incase)
i have used cyanogenmod in the past and i just prefer it;
so anyway now that i know that i'll flash to cm12.
Help me find out my rom
Hello , I have Sprint running on 4.4.2 ANI2 , but when I flash OA1 it doesn't flash, I think I have od3. Can you tell me is it od3 bootloader and ANI2 stock ? And can you tel me how to get 5.0 with working lte and unlocked ? Thanks
In Phone info
Bootloader version - G900PVPU2BOD3
PDA Version - G900FZHU1ANI2
Baseband Version - G900PVPU1ANCB
What is the steps to get 5.0 ulocked ?
What S3 SCH-I535 CyanogenMod support?
Code:
2014-06-26 USA (Verizon) 4.4.2 I535VRUDNE1 I535VZWDNE1
2014-06-26 USA (Verizon) 4.3 I535VRUCNC1 I535VZWCNC1
2015-08-18 USA (Verizon) 4.3 I535VRUCML1 I535VZWCML1
2015-08-10 USA (Verizon) 4.1.2 I535VRBMF1 I535VZWBMF1
2015-08-10 USA (Verizon) I535VRBMB1 I535VZWBMB1
I understand it must be modified bootloader
What packages Android are available for this model phone I535OYUDNE1 except Original Verizon 4.4.2 KitKat?
Try everything and fails miserably which:
-CF-Auto-Root-d2vzw-d2vzw-schi535
-CWM in ODIN to Cyanogen 12.1 and Liquid
-TWM in ODIN to Cyanogen 12.1 and Liquid
-Safestrap-D2VZW-4.00-B02 in TowerRoot to Cyanogen 12.1, Liquid, PAC-ROM and AICP
germangelv said:
What S3 SCH-I535 CyanogenMod support?
Code:
2014-06-26 USA (Verizon) 4.4.2 I535VRUDNE1 I535VZWDNE1
2014-06-26 USA (Verizon) 4.3 I535VRUCNC1 I535VZWCNC1
2015-08-18 USA (Verizon) 4.3 I535VRUCML1 I535VZWCML1
2015-08-10 USA (Verizon) 4.1.2 I535VRBMF1 I535VZWBMF1
2015-08-10 USA (Verizon) I535VRBMB1 I535VZWBMB1
I understand it must be modified bootloader
What packages Android are available for this model phone I535OYUDNE1 except Original Verizon 4.4.2 KitKat?
Try everything and fails miserably which:
-CF-Auto-Root-d2vzw-d2vzw-schi535
-CWM in ODIN to Cyanogen 12.1 and Liquid
-TWM in ODIN to Cyanogen 12.1 and Liquid
-Safestrap-D2VZW-4.00-B02 in TowerRoot to Cyanogen 12.1, Liquid, PAC-ROM and AICP
Click to expand...
Click to collapse
If I correctly understand what you are saying and asking:
You have an i535 running the stock 4.4.2 Verizon rom with corresponding bootloader and modem, NE1.
If this is so; you can not run any version of Cyanogen. There are only two roms other than stock that I have seen to work. They are SuperLiteROM, I have run this one, and PaulPizz ROM. Both are based on the official TouchWiz ROM. Just as you can not run CyanogenMod, you can not run ROMs based on it not those based on AOSP.
I bought an i535 back in the spring that was on 4.4.2. I rooted it with Towelroot, installed BusyBox, and installed SafeStrap. I then flashed SuperLiteROM. The phone worked for months without problems.
You can install the unofficial SafeStrap designed for the 4.4.2 firmware. You can not run any other custom recovery.
dawgdoc said:
If I correctly understand what you are saying and asking:
You have an i535 running the stock 4.4.2 Verizon rom with corresponding bootloader and modem, NE1.
If this is so; you can not run any version of Cyanogen. There are only two roms other than stock that I have seen to work. They are SuperLiteROM, I have run this one, and PaulPizz ROM. Both are based on the official TouchWiz ROM. Just as you can not run CyanogenMod, you can not run ROMs based on it not those based on AOSP.
I bought an i535 back in the spring that was on 4.4.2. I rooted it with Towelroot, installed BusyBox, and installed SafeStrap. I then flashed SuperLiteROM. The phone worked for months without problems.
You can install the unofficial SafeStrap designed for the 4.4.2 firmware. You can not run any other custom recovery.
Click to expand...
Click to collapse
Exactly, that is what I asked, excuse my bad English.
Regarding CM13 or CM12, in what function devices S3?
germangelv said:
Exactly, that is what I asked, excuse my bad English.
Regarding CM13 or CM12, in what function devices S3?
Click to expand...
Click to collapse
The Verizon i535, also called the d2vzw, once it has the 4.4.2 bootloader on it, can not run any version of CyanogenMod.
It cannot run CM13. It cannot run CM12.
need working official stock rom LG G2 d800 at&t running it was a refurbised phone changed d800 to d802 but now it is in its genuine rom provided by at&t i got re flashed it from shop
Android: 4.2.2
Baseband Version: M8974A-AAAANAZM-1.0.190034
Kernel Ver: 3.4.0
Build: JDQ39B
Storage: 32 gb
Software Version: D80010o
i shall be thankful bcz recently when i was running refurbised kitkat rom i connected it to pc suite it gave me update of lolipop after the update my phone baseband,IMEI, was gone and touch screen was not working properly so i want a rom which will work 100% correct on given specs
Hello!
There are so many threads on Resurrection Remix that I can't make heads or tails on how to update my ROM. I've gone into settings and went into Configurations > Updates and it tells me that it cannot check for updates. I am currently downloading the latest nightly from the official resurrectionremix.com website. Will this nightly be compatible? I don't want to install the wrong build.
My device is a Samsung Galaxy S4 Canadian i377m running v5.6.6-20160401-jfltetmo.
Can someone help me maneuver through all these threads?
Solution to "Unable to install this rom on my i337m (bell canada)"
I found a way around the problem I was facing. I own a Samsung Galaxy S4 i337m Telus (jfltecan) and had problem updating from v5.6.6 to v5.7.4 because there wasn't an upgrade anywhere. But I located a another one for a different device and flashed a different TWRP, rather than using jfltecan, or jfltemo or jflteatt which none of these would flash...I ended up using jfltexx (https://dl.twrp.me/jfltexx/twrp-3.0.2-0-jfltexx.img.tar.html) instead and it worked. Then I searched for a RR ROM that was compatible with jfltexx with the version v5.7.4 and it worked flawlessly!
Here is the compatible ROM: https://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-resurrection-lollipop-v5-5-5-t3195202
Hope this helps somebody!