Related
Important!
It is strongly recommended that you flash clockwork recovery via NVFlash. If for some reason this or a future nightly build causes your phone to not boot up, you will not be able to boot into recovery unless you have it flashed via NVFlash.
NVFlash for Linux
NVFlash for Windows
To clear up some confusion, if you flashed your recovery via ROM Manager, you didn't actually flash a recovery. It is what we call a fakeflash, you should still probably flash with NVFlash.
Instructions
Download from http://download.cyanogenmod.com/?device=p999 and flash like you would any other ROM (via recovery or ROM Manager).
Be sure to backup before flashing, and of course a wipe is necessary when coming from stock.
Gapps are available from the usual places, however do not download the version that says it is for Tegra, even though this is a tegra device, as it will not flash.
Mod Edit:
Mikey1022 said:
Google Addon: http://goo-inside.me/google-apps/
Check the lastest package available on top
Click to expand...
Click to collapse
ChrisSoyars Edit:
After skimming some of the posts in this thread, here are some things that you can expect.
What to expect
- Everything working including Wifi, GPS, Audio, Camera, Front Facing Camera
- Screen off animation is not enabled, therefore it isn't broken.
- Occasional audio problems (as far as I know they have not been fixed). If audio does not play just reboot.
- Automagical brightness weridness, this is controlled by the kernel and not userspace, even having it working is very hacky.
are the battery drivers still borked?
jumaaneface said:
are the battery drivers still borked?
Click to expand...
Click to collapse
yes, yes they are
What exactly is a nightly? Is it just like an alpha build or something? I never understood the term.
booch137 said:
What exactly is a nightly? Is it just like an alpha build or something? I never understood the term.
Click to expand...
Click to collapse
Exactly what the name implies....they make a build nightly. Consider it beta.
booch137 said:
What exactly is a nightly? Is it just like an alpha build or something? I never understood the term.
Click to expand...
Click to collapse
They are also usually buggy; so if that isn't your thing, I would avoid flashing CM 7 (or 7.1) until it's final release.
Interesting... thanks for the reply.
thanks for this. I was syncing my repo and was going to compile from source, any reason as to not continue?
Ducter said:
thanks for this. I was syncing my repo and was going to compile from source, any reason as to not continue?
Click to expand...
Click to collapse
ChrisSoyars tweeted half an hour ago that he is about to do the first nightly build.
Does this fix the reboot problem?
Sent from my LG-P999 using XDA App
MWBehr said:
Exactly what the name implies....they make a build nightly. Consider it beta.
Click to expand...
Click to collapse
I'd call it more in the pre-alpha to alpha stages myself
momentarylapseofreason said:
I'd call it more in the pre-alpha to alpha stages myself
Click to expand...
Click to collapse
We don't do nightly builds until most everything is working, our nightly builds are "beta" status. We don't externally "alpha" test.
ctso said:
We don't do nightly builds until most everything is working, our nightly builds are "beta" status. We don't externally "alpha" test.
Click to expand...
Click to collapse
Is bluetooth and wifi working on this build?
Google Addon: http://goo-inside.me/google-apps/
Check the lastest package available on top
CM7!!!!!!!!!!! <3 thanks!!!!
Just downloaded it ... CANT WAIT !!! ill keep you guys updated with any bugs or issues
First build it up!!!!
AHAHAHHAAHAH Im 2 !!! yeeaaaaaaaaaaaa
every BODY FLASH FLASH lol
graffixnyc said:
First build it up!!!!
Click to expand...
Click to collapse
damn dude u first !!!
I'm in the middle of downloading and the damn thing reboots...
I was just wondering whether there are any 4.4 roms available? The only one I found was CM but I feel like there must be more. I might be just going blind, however I could not see any other roms. Any links or suggestions are appreciated. Thank you.
mefistofel666 said:
I was just wondering whether there are any 4.4 roms available? The only one I found was CM but I feel like there must be more. I might be just going blind, however I could not see any other roms. Any links or suggestions are appreciated. Thank you.
Click to expand...
Click to collapse
nope those 3 build threads are it
I suggest using kitkang http://forum.xda-developers.com/showthread.php?t=2525831
as its the latest rom with Nightlys going on every night
and seems to be the only one making progress so far (FCC,SD,Overall UI smoothness,Video GPU performance)
SSPENCER10 is working very well for me. Everything he is putting out is stable and appears to be having fewer issues than KitKang. It is even working just as well with ART as it was with Dalvik. The 11-23 build also has the new CM11 boot animation.
markdapimp said:
I suggest using kitkang http://forum.xda-developers.com/showthread.php?t=2525831
as its the latest rom with Nightlys going on every night
and seems to be the only one making progress so far (FCC,SD,Overall UI smoothness,Video GPU performance)
Click to expand...
Click to collapse
You realize they are all based on exactly the same code right?
And you realize that if one makes 'progress' they all make 'progress' because they use the same code right?
[ROM][4.3.1][Official][OSE Rom][d2vzw]
I'm using this one and so far so good.
It has nightlies that have 4.4
I'd recommend KitKang. It's been extremely stable and has really good battery life. ART works very well.
Sent from my SCH-I535 using Tapatalk
KitKang!!
Second that!!
Sent from my SCH-I535 using xda app-developers app
markdapimp said:
I suggest using kitkang http://forum.xda-developers.com/showthread.php?t=2525831
as its the latest rom with Nightlys going on every night
and seems to be the only one making progress so far (FCC,SD,Overall UI smoothness,Video GPU performance)
Click to expand...
Click to collapse
Summary: I don't think KitKang is recognizing my SIM card, and is causing "Phone" to crash every second or two.
Hey guys, I tried flashing the latest KitKang ROM last night, but ran into a big issue. I wiped system, cache, dalvik cache, etc. I then reflashed the MF1 firmware (it was already flashed, but for some reason I always feel better re-flashing it every time.) Then I flashed the latest KitKang D2VZW nightly linked above, and flashed the GApps mentioned in that thread too. However, upon rebooting, every second or so it would say "phone has forced closed" (or something along those lines. Also, there was no signal. I got through the setup process after a VERY long time of pressing "okay" to that error and setting up my CM and Google accounts with one key in between each error. I thought I would be able to go into Mobile Networks and change the settings, which fixed certain early issues with CM10.1 or 10.2, but to no avail. I then tried reflashing (after wiping clean) CM10.2 again to get certain files for the phone to work, then flashing CM11 over that, and it seemed to work up until it freezes after getting to the home screen. Any thoughts on what the issue may be and/or how to fix it?
Thanks!
Sent from my SCH-I535 using xda app-developers app
I am looking to see if there is a build of CM11S without gapps pre added to the rom so that I can use the customizable GAPPS package to remove unwanted app packages such as TTS, talkback, quickoffice, soundsearch, play movies, play games and so on.
You could download the recovery flashable version of the CM11S build from CM directly and delete the files prior to flashing. Just be aware you won't be able to do the OTA updates moving forward as you need a full image to do so
Hold up; just to make sure I understood that how you meant it.
I wont be able to do OTA updates unless i keep the entire GAPPS package installed?
pyrocide said:
Hold up; just to make sure I understood that how you meant it.
I wont be able to do OTA updates unless i keep the entire GAPPS package installed?
Click to expand...
Click to collapse
Yep, that's correct. OTA updates require a full, untouched system image otherwise the update will fail
wow might as well just go to CM11 and forget CM11S altogether in that case.
+1 to what Eddy said. Doing any modifications to /system/ will cause problems when it comes to updating to the next OTA. So your best chance would be to use CM11 or any other custom ROM with the gapps of your choice.
that actually makes me a tad bit disappointed now.
I was really hoping to keep CM11S for some of the interesting features it had. Oh well, CM11 it is. Just need to find the one without many issues to use until stable is released. Any suggestions?
pyrocide said:
that actually makes me a tad bit disappointed now.
I was really hoping to keep CM11S for some of the interesting features it had. Oh well, CM11 it is. Just need to find the one without many issues to use until stable is released. Any suggestions?
Click to expand...
Click to collapse
You can use CM11 (or any other ROM that uses a CM base) and have the CM11S features such as lock screen, camera (available as a apk standalone, doesnt matter what ROM you use), AudioFX (same.. available as a apk).
I'd probably recommend crDroid if you plan to stick to the CM base. Gets updated weekly or so and is based off CM11 without too many additions.
@bp328i did a great job at making a zip of all the CM11S apps that work with crDroid http://forum.xda-developers.com/showpost.php?p=55654697&postcount=132
crDroid: http://forum.xda-developers.com/oneplus-one/development/rom-crdroid-kitkat-4-4-4-t2880851
Not sure whether or not bp used the stock lock screen but attached is the gradient lock screen. Looks better than the stock lock screen (search for what it looks like).
Alright, sounds good. What about people flashing custom kernels? Is this to fix issues with the phone or is it to add something?
pyrocide said:
Alright, sounds good. What about people flashing custom kernels? Is this to fix issues with the phone or is it to add something?
Click to expand...
Click to collapse
Both.
Additional features are made by kernel-by-basis. I can go detail-by-detail on what features but its better off not to since you'll be confused.
The biggest fix would be touchscreen as it has a new touchscreen firmware that fixes ghost swipes.
What Kernel would you recommend? I was reading that some fix a battery drain issue as well?
Other than the personal GAPPS issue i have, does CM11S have any other faults currently?
pyrocide said:
What Kernel would you recommend? I was reading that some fix a battery drain issue as well?
Other than the personal GAPPS issue i have, does CM11S have any other faults currently?
Click to expand...
Click to collapse
I don't use CM11S so I can't tell you for sure.
Popular kernels are ak or franco kernel. I personally use Franco Kernel.
Think Im gonna go for CM11 nightlies after looking at Madhi, crDroid and a few others. I just like CM11 for my HTC One S.
For Franco's kernel would I be using the CM11S or AOSP if flashing CM11 nightly? Since CM11s is just a custom version of CM11 i wasnt sure.
nvm found it finally from G+ thread, AOSP
Hi folks
I am using ressurection remix v5.4 android 5.1 based custom ROM on my N5 for a couple of days and facing some bugs which are
1. When I change app drawer animation sometimes app icons don't show on the whole page.
2. When screen rotate sometimes notification keys don't appears.
3. Facebook messenger doesn't popup. I can't use when I am using another app.
4. Most of the time when I restart the phone, 'android is optimizing the apps xx of xx' appears.
And some other bugs those I can't remember right now.
So I decided to change the ROM but confused which one to choose.
My need is a stable custom ROM with some beneficial changes and most importantly with no bugs.
I really need your help folks.
Thanks
bpy13 said:
Hi folks
I am using ressurection remix v5.4 android 5.1 based custom ROM on my N5 for a couple of days and facing some bugs which are
1. When I change app drawer animation sometimes app icons don't show on the whole page.
2. When screen rotate sometimes notification keys don't appears.
3. Facebook messenger doesn't popup. I can't use when I am using another app.
4. Most of the time when I restart the phone, 'android is optimizing the apps xx of xx' appears.
And some other bugs those I can't remember right now.
So I decided to change the ROM but confused which one to choose.
My need is a stable custom ROM with some beneficial changes and most importantly with no bugs.
I really need your help folks.
Thanks
Click to expand...
Click to collapse
The one I like. Stock+root+xposed
bitdomo said:
The one I like. Stock+root+xposed
Click to expand...
Click to collapse
I had no idea about xposed as I m not very expert android user. after ur reply I googled it and liked the idea. But only one thing I don't want to loose is the USB storage support because I didn't find this on stock rom without using any app.
I've been running Cataclysm for a few weeks now
Combine that with ElementalX kernel and my phone has been rock solid, great battery life (some of the best I've seen out of it) and I couldn't be happier.
linkboy said:
I've been running Cataclysm for a few weeks now
Combine that with ElementalX kernel and my phone has been rock solid, great battery life (some of the best I've seen out of it) and I couldn't be happier.
Click to expand...
Click to collapse
Shall I download elementalX kernel separately or I will get it with cataclysm rom. And if I have to download it then is the installation process is as same as installing rom ?
bpy13 said:
Shall I download elementalX kernel separately or I will get it with cataclysm rom. And if I have to download it then is the installation process is as same as installing rom ?
Click to expand...
Click to collapse
Cataclysm rom uses stock kernel, you have to download ElemetalX separately. First flash rom and than flash kernel, but you don't have to wipe anyting before kernel flashing.
dimi3ye said:
Cataclysm rom uses stock kernel, you have to download ElemetalX separately. First flash rom and than flash kernel, but you don't have to wipe anyting before kernel flashing.
Click to expand...
Click to collapse
Thanx dimi3ye....last night I flashed the cm12 nightly caz I downloaded it before and installed the elementalx 2.10 stock/aosp version. Very much satisfied with the kernel as its giving me pretty good standby battery life though I m using the dt2w option and most importantly impressed with the sound gain option.
But still worried about custom ROM because cm12 launcher still has some bugs. So I need to know about cataclysm ROM what are the best picks of the ROM and the stability.
bpy13 said:
But still worried about custom ROM because cm12 launcher still has some bugs. So I need to know about cataclysm ROM what are the best picks of the ROM and the stability.
Click to expand...
Click to collapse
Cataclysm is based on factory images, so it is rock stable rom with excellent features. For me, Cataclysm is best rom so far.
dimi3ye said:
Cataclysm is based on factory images, so it is rock stable rom with excellent features. For me, Cataclysm is best rom so far.
Click to expand...
Click to collapse
Okay folk....let's try it....ohh another thing...if i flash cataclysm now will the kernel remain the same or it will flash to stock (sorry for the bad English and for the bothering bcoz I m new to android)
bpy13 said:
Okay folk....let's try it....ohh another thing...if i flash cataclysm now will the kernel remain the same or it will flash to stock (sorry for the bad English and for the bothering bcoz I m new to android)
Click to expand...
Click to collapse
Your curent kernel will be reflashed with kernel that comes with Cataclysm... Read first page on Cataclysm tread for flashing instructions, because latest version is sometimes just update (~ 30mb), and first you have to flash major, big version (~ 550mb) before that update...
dimi3ye said:
Your curent kernel will be reflashed with kernel that comes with Cataclysm... Read first page on Cataclysm tread for flashing instructions, because latest version is sometimes just update (~ 30mb), and first you have to flash major, big version (~ 550mb) before that update...
Click to expand...
Click to collapse
Lol....yeah I have that quantity of brain my friend......now I am downloading 21st march stable version of 5.1. Can i update latest updates over ota bcoz one of the last updates has in call proximity sensor option which is attractive.
bpy13 said:
Lol....yeah I have that quantity of brain my friend......now I am downloading 21st march stable version of 5.1. Can i update latest updates over ota bcoz one of the last updates has in call proximity sensor option which is attractive.
Click to expand...
Click to collapse
Sorry, I didn't mean to offend you... You have to flash updates via recovery.
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
dimi3ye said:
Sorry, I didn't mean to offend you... You have to flash updates via recovery.
Click to expand...
Click to collapse
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
bpy13 said:
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
Click to expand...
Click to collapse
Gapps are included in rom. Usually, just flash latest update, if something else is needed, there is a description.
dimi3ye said:
Gapps are included in rom. Usually, just flash latest update, if something else is needed, there is a description.
Click to expand...
Click to collapse
Thanx a lot
bpy13 said:
Thanx a lot
Click to expand...
Click to collapse
One more advice, don't use twrp 2.8.6.x because it have some issues, use 2.8.5.3 instead...
dimi3ye said:
One more advice, don't use twrp 2.8.6.x because it have some issues, use 2.8.5.3 instead...
Click to expand...
Click to collapse
I am on 2.8.5.2...is it OK??
And one more thing...can u tell me the difference between beta version vs stable of cataclysm?
bpy13 said:
I am on 2.8.5.2...is it OK??
And one more thing...can u tell me the difference between beta version vs stable of cataclysm?
Click to expand...
Click to collapse
2.8.5.2 is fine... stable release means that every feature works perfect, beta is also rockstable rom, but new added features might have small issues (usually everything works perfect). I always flash latest whether is stable or beta, never had issues.
dimi3ye said:
2.8.5.2 is fine... stable release means that every feature works perfect, beta is also rockstable rom, but new added features might have small issues (usually everything works perfect). I always flash latest whether is stable or beta, never had issues.
Click to expand...
Click to collapse
didn't download the beta which has proximity sensor speaker option.
This thread is for updates of temasek cm12.1 built by myself. I will be building for hlte and hltespr.
Temasek made this all possible and it is all his work I am just taking the time to build and upload.
V19.3+ root removed, you will need to flash SuperSU zip to achieve root.
Downloads:
Hlte or Hlte on my BasketBuild
Hltespr or Hltespr on my BasketBuild
Credits: @temasek
XDA:DevDB Information
Temasek cm-12.1 unofficial cyanogenmod, ROM for the Samsung Galaxy Note 3
Contributors
trader418, Temasek
Source Code: https://github.com/temasek/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: Cyanogenmod
Version Information
Status: Beta
Created 2016-03-26
Last Updated 2016-03-26
Thanks for keeping support for the Note 3 alive.
Great, good to see 12.1 back alive. Anything I can do to help, just say so.
Thanks again! Always willing to help however I can.
BTW, really good job on creating the thread using just your phone! I've seen FAR worse.
Buslova said:
Thanks again! Always willing to help however I can.
BTW, really good job on creating the thread using just your phone! I've seen FAR worse.
Click to expand...
Click to collapse
Haha thank you, I try my best
Glad to see all of you guys showing support. If I ever don't see temasek updated the version and any of you do just post here and I'll build, however I think most of the time I should be okay. I'm going to set up a straw poll in the include root vs not include. I also could start to use the ota app if you guys really would like that
Straw poll whether to include root in the build here http://strawpoll.me/7191529
trader418 said:
Haha thank you, I try my best
Glad to see all of you guys showing support. If I ever don't see temasek updated the version and any of you do just post here and I'll build, however I think most of the time I should be okay. I'm going to set up a straw poll in the include root vs not include. I also could start to use the ota app if you guys really would like that
Click to expand...
Click to collapse
I will always use root however I understand some people's need for it to be rootless and well, let's be honest, it ain't hard to flash supersu right after flashing the rom. lol.
OTA is a nice lazy option for the USER but I've gathered from past posts in other threads that it's not always so easy for the dev since the OTA app is maintained/owned by another dev and sometimes has issues. Again, we're talking about a community here who is flashing custom roms on their devices. Manually downloading and flashing shouldn't be a major issue.
Having said all that, if i were to vote I'd say:
Built-in root: No
OTA: Yes (if it's not a headache)
Buslova said:
I will always use root however I understand some people's need for it to be rootless and well, let's be honest, it ain't hard to flash supersu right after flashing the rom. lol.
OTA is a nice lazy option for the USER but I've gathered from past posts in other threads that it's not always so easy for the dev since the OTA app is maintained/owned by another dev and sometimes has issues. Again, we're talking about a community here who is flashing custom roms on their devices. Manually downloading and flashing shouldn't be a major issue.
Having said all that, if i were to vote I'd say:
Built-in root: No
OTA: Yes (if it's not a headache)
Click to expand...
Click to collapse
Ota isn't too bad, I'll probably use it soon tbh, but I won't promise anything
hey guys, I have been having trouble with tema's cm 13 builds so i decided to give 19.1 a shot. Unfortunately, I haven't had any luck with the rom. The rom just boot loops after every installation. I have tried with gapps aroma and pico with different wipes with no luck. continues to bootloop as soon as I reboot and i never get into the rom. I am back on tema's for now but would love to switch to 19.1 if I could get some help. Sorry for being a noob, Im probably messing something up somewhere and I thank you for your help in advance!
redfuryjr55 said:
hey guys, I have been having trouble with tema's cm 13 builds so i decided to give 19.1 a shot. Unfortunately, I haven't had any luck with the rom. The rom just boot loops after every installation. I have tried with gapps aroma and pico with different wipes with no luck. continues to bootloop as soon as I reboot and i never get into the rom. I am back on tema's for now but would love to switch to 19.1 if I could get some help. Sorry for being a noob, Im probably messing something up somewhere and I thank you for your help in advance!
Click to expand...
Click to collapse
Start with which device you have
trader418 said:
Start with which device you have
Click to expand...
Click to collapse
haha sorry! htlespr!
redfuryjr55 said:
haha sorry! htlespr!
Click to expand...
Click to collapse
I'm not sure mate, has anyone else got any suggestions?
There has been reports of multiple wipes and reboots and then flashing the ROM helps but I cannot say it will help
trader418 said:
I'm not sure mate, has anyone else got any suggestions?
There has been reports of multiple wipes and reboots and then flashing the ROM helps but I cannot say it will help
Click to expand...
Click to collapse
hmmm.. well I managed to get booted by installing temasek's last build (12.9 i think, the one from jan) along with his kernel. It booted fine and made it into setup. I then rebooted to recovery and dirty flashed you 19.1. Got bootlooped and said fk it and re-flashed the kernel and got into 19.1! Now that is great and all, but super weird/inconsistent. Also, once I got everything set up I could not turn on wifi or bluetooth; is this a known issue with a fix? Also, are there recommended installation instructions or is there a recommended kernel for you build? Thanks in advance for your help and patience with my noobness! Again I am on htlespr!
redfuryjr55 said:
hmmm.. well I managed to get booted by installing temasek's last build (12.9 i think, the one from jan) along with his kernel. It booted fine and made it into setup. I then rebooted to recovery and dirty flashed you 19.1. Got bootlooped and said fk it and re-flashed the kernel and got into 19.1! Now that is great and all, but super weird/inconsistent. Also, once I got everything set up I could not turn on wifi or bluetooth; is this a known issue with a fix? Also, are there recommended installation instructions or is there a recommended kernel for you build? Thanks in advance for your help and patience with my noobness! Again I am on htlespr!
Click to expand...
Click to collapse
All I know is that all my hlte builds are tested with a clean wipe and then a flash and reboot. I have no problems. I am using temaseks device tree so the only difference between his and my build should technically be root and ota app. Other than that it should be identical
trader418 said:
All I know is that all my hlte builds are tested with a clean wipe and then a flash and reboot. I have no problems. I am using temaseks device tree so the only difference between his and my build should technically be root and ota app. Other than that it should be identical
Click to expand...
Click to collapse
I am using this as my daily Rom, the only problems I get are the weather widget doesn't update and it wont connect to the wifi in my local hospital, I am using build v19.0 build date 17th of march, even my s-pen works !
I will test this later and post back results
swukjay said:
I am using this as my daily Rom, the only problems I get are the weather widget doesn't update and it wont connect to the wifi in my local hospital, I am using build v19.0 build date 17th of march, even my s-pen works !
I will test this later and post back results
Click to expand...
Click to collapse
Either change weather provider to another or customize your location. Sometimes yahoo weather isn't working well.
As for WiFi, check your dev options.
redfuryjr55 said:
haha sorry! htlespr!
Click to expand...
Click to collapse
Just in case - have updated your Modem and Bootloader to the latest? All wireless related problems might be connected to it.
eseregin said:
Just in case - have updated your Modem and Bootloader to the latest? All wireless related problems might be connected to it.
Click to expand...
Click to collapse
what modem/baseband should i use for htlespr? what is tested and working, does anyone know?
redfuryjr55 said:
what modem/baseband should i use for htlespr? what is tested and working, does anyone know?
Click to expand...
Click to collapse
Hmm, still no luck eh? I tried helping ya last night in the other thread. I'm also a hltespr user. I'm still running OH1 baseband however OK2 is the latest. Also, as I told you last night, I'm using an older version of TWRP recovery (ver. 2.8.7) however the latest is 3.0.0.
What baseband are YOU running? Go to settings, "About phone", and look for "Baseband version" and let us know. =)
redfuryjr55 said:
what modem/baseband should i use for htlespr? what is tested and working, does anyone know?
Click to expand...
Click to collapse
Sorry, I have different phone..
Might be the latest here
https://idlekernel.com/flash-tools/firmware/hltespr_SM-N900P/N900PVPUEOK2/
But I am far away from sure