Database Info

[ROM] cyanogenmod 6.1.0 final mirror

didn't see a link on xda for the release of 6.1 final
EDIT: bandwidth exceeded. nobody mirrored it but cyanogenmod.com is fixed so you can grab it there at http://forum.cyanogenmod.com/topic/7060-cyanogenmod-61-for-hero-cdma-v610-12072010/
there you go.
mirror it if you can, dunno what my dropbox bandwidth limit is.

just went to the original site and downloaded and installed the rom and gapps. i have never seen my phone so freaking fast!!!!! i have tried the other cm rc0 and rc1 posted by darchstar and i never thought they were that fast. but omg is this fast now! this will hold me off till we get 2.2 sense fully functional or till we get gingerbread.

Thankx
Sent from my HERO200 using Tapatalk

so CM is completed?

After flashing, before first boot completes it just loops over and over. It's been over 20 minutes and still looping the CyanogenMod logo. Any ideas what I've done wrong? I'm scared to force reboot.

danieledwards1 said:
After flashing, before first boot completes it just loops over and over. It's been over 20 minutes and still looping the CyanogenMod logo. Any ideas what I've done wrong? I'm scared to force reboot.
Click to expand...
Click to collapse
Do a full wipe, cache, system etc and then reflash rom and gapps and give it a go if you haven't already.
Sent from my HERO200 using Tapatalk

How recent is this in regards to the nightlies? Newer than 158?

bray424 said:
How recent is this in regards to the nightlies? Newer than 158?
Click to expand...
Click to collapse
It came out mid day so I would say its pretty new. Maybe 157 ish I believe
Sent from my HERO200 using Tapatalk

Won't CM automatically restore gapps

it will if you don't wipe your data.

Just to make sure, can i flash this over darchstar's cm6 rc1 rom without wiping?
Thanks Eric

ekrainey said:
Just to make sure, can i flash this over darchstar's cm6 rc1 rom without wiping?
Thanks Eric
Click to expand...
Click to collapse
You *CAN*. YMMV. I would still nandroid 1st just in case.

alexnaoumi said:
so CM is completed?
Click to expand...
Click to collapse
No.... no rom is ever really "completed"

I think what everyone would like to know is, if there is a Stable version for heroc ? ?

HandsomeOne said:
I think what everyone would like to know is, if there is a Stable version for heroc ? ?
Click to expand...
Click to collapse
What do you think this thread is about?

alexnaoumi said:
so CM is completed?
Click to expand...
Click to collapse
CM 6.1.0 is completed, but that doesn't mean there won't be updates. Then of course there's CM 7 with Gingerbread which apparently will start showing up in January. CM is a gift that never stops giving.

I just installed gaaps on its own
Works great. Sprint voice mail and Google didn't work well so I installed youmail app. The best voice mail out there. Free for sprint users.
Sent from my HERO200 using XDA App

FYI under AOSP's thread [unstable] GB mod, he just linked the new GAPPS with the new market. Im gonna make sure it works well..

Gapps 20101213 and cm6.1 final
Just flashed these together and my search button does not bring up the google search app. Anyone else have this problem? Thanks in advance...

The gapps zip does not contain google search app, download it from the market and it will work.

[ROM] [NIGHTLY] CM7 on the G2x. *Take 2*

Important!
It is strongly recommended that you flash clockwork recovery via NVFlash. If for some reason this or a future nightly build causes your phone to not boot up, you will not be able to boot into recovery unless you have it flashed via NVFlash.
NVFlash for Linux
NVFlash for Windows
To clear up some confusion, if you flashed your recovery via ROM Manager, you didn't actually flash a recovery. It is what we call a fakeflash, you should still probably flash with NVFlash.
Instructions
Download from http://download.cyanogenmod.com/?device=p999 and flash like you would any other ROM (via recovery or ROM Manager).
Be sure to backup before flashing, and of course a wipe is necessary when coming from stock.
Gapps are available from the usual places, however do not download the version that says it is for Tegra, even though this is a tegra device, as it will not flash.
Mod Edit:
Mikey1022 said:
Google Addon: http://goo-inside.me/google-apps/
Check the lastest package available on top
Click to expand...
Click to collapse
ChrisSoyars Edit:
After skimming some of the posts in this thread, here are some things that you can expect.
What to expect
- Everything working including Wifi, GPS, Audio, Camera, Front Facing Camera
- Screen off animation is not enabled, therefore it isn't broken.
- Occasional audio problems (as far as I know they have not been fixed). If audio does not play just reboot.
- Automagical brightness weridness, this is controlled by the kernel and not userspace, even having it working is very hacky.

Any reference to the first thread you need too look up, it's linked here:
http://forum.xda-developers.com/showthread.php?t=1058131

Changelog:
http://cm-nightlies.appspot.com/?device=p999

Thanks!!! Flashing

Is the server still down? The latest I see is 2011-5-25.

gamefreakgcb said:
Is the server still down? The latest I see is 2011-5-25.
Click to expand...
Click to collapse
I don't know whether it is still down or not, but yeah, that's still the latest build

Hrmm awesome, what about the battery stats? Anyone know if that has been fixed?
G2X & Nexus S

brian6685 said:
Hrmm awesome, what about the battery stats? Anyone know if that has been fixed?
G2X & Nexus S
Click to expand...
Click to collapse
Not on cm7 but Faux has made good progress with the help of debauchedsloth

So does this mean nightlies will resume soon?

edit, nvm oops
G2x with faux AOSP and faux orange kernel. [email protected] 5107 quadrant.

For anybody interested this is a build I just compiled about an hour ago
http://www.multiupload.com/6WEZDZMGSX

WHy a new thread? what is new?

aim1126 said:
For anybody interested this is a build I just compiled about an hour ago
http://www.multiupload.com/6WEZDZMGSX
Click to expand...
Click to collapse
How is your compile different from the gigglebread one from this morning?

jawknee530 said:
How is your compile different from the gigglebread one from this morning?
Click to expand...
Click to collapse
I dot think there's any really maybe one or two commits that got merged throughout the day. I just like compiling my own builds
Sent from my LG-P999 using XDA App

I see this thread kinda senseless as there isn't a newer nightly that was available before using the old thread. Although 2 pages seems more manageable then 300+ (which will happen eventually to this thread.)
Being a website developer I know these threads add up pretty quickly (hurray xda!)
I haven't flashed an actual CM rom in almost a week since the server crash. Hopefully the new thread is a sign that the server was repaired and new nightlies are on the way. Using the latest KANGS to get my fix, I know there is lots of progress. Running the latest KANG from today I think the rom is almost ready for a stable release after a few bugs get worked out.
I think the work you guys are doing is fantastic and much appriciated, although it may seem all we do is ***** half the time. Android wouldn't be the same without all of the developers leading the way. Big props. Hope all is well and I plan to continue to follow your work.

aim1126 said:
For anybody interested this is a build I just compiled about an hour ago
http://www.multiupload.com/6WEZDZMGSX
Click to expand...
Click to collapse
Just installed, cheers!
And thanks CM, I'm coming from #34 and just five minutes in its obvious there's been quite a bit of work done. Status Bar brightness slider is sweet.

i see a build 36 but it won't let me download? says its not found...

shniggies said:
i see a build 36 but it won't let me download? says its not found...
Click to expand...
Click to collapse
Probably still being built. Give it some time and check again.
Sounds like buildbot may be back up... this would be nice. <3

reisaru said:
Probably still being built. Give it some time and check again.
Sounds like buildbot may be back up... this would be nice. <3
Click to expand...
Click to collapse
ho ho... i must have checked riiiiiiight when it was uploading... because its downloading now

How did you find build 36 when 35 isn't out yet?
Sent from my LG-P999 using XDA App

[ROM] [CM7] unofficial nightly

As long there is no official CyanogenMOD support on the Desire S, we must compile the nightlys from source for the Desire S.
I will compile a nightly if there are important changes or bugfixes in the cyanogen changelog.
These CyanogenMod builds are highly experimental and unsupported.
DO NOT: Post to the bug tracker
DO NOT: Think of this as official forum support; this thread will be strictly user to user support. Don't expect CM-dev help.
ROM Download
update-cm-7.1.0-RC1-DesireS-KANG-260811.zip
Google Apps
Download: link
Howto Install
- Root the device and install ClockworkMod Recovery. Instructions are available here.
- Perform a NANDroid backup of your current ROM.
- Format the system, data & cache partitions of your device.
- Perform a factory reset.
- Flash CyanogenMod Port
- Optional: Install the Google Apps addon package.
Here you can see the base changes for the Desire S device
GitHub Link
All THX are going to the Cyanogen TEAM

perhaps needed

Good luck with it

Just a small thing...its Unofficial and not Inofficial...

vampire36 said:
Just a small thing...its Unofficial and not Inofficial...
Click to expand...
Click to collapse
@OP well done
@vampire 36
Glad someone pointed that out lol
Sent from my HTC Desire S using XDA Premium App

superkid said:
Good luck with it
Click to expand...
Click to collapse
...can you take a look in your pm-box? with the newest nightlys, the light sensor is not working. what have you done to port the 7.1 rc1 with working light sensors?
thx for your help

first nightly up
cm_saga_full-40.zip

Mention the bugs...features...specs...
So that ppl know d rom before downloading

vampire36 said:
Mention the bugs...features...specs...
So that ppl know d rom before downloading
Click to expand...
Click to collapse
I think the idea with nightlies(official ones anyway) is that the users find all the bugs so the stable version can be updated with only the things that work, although i may be completely wrong

Malooga said:
I think the idea with nightlies(official ones anyway) is that the users find all the bugs so the stable version can be updated with only the things that work, although i may be completely wrong
Click to expand...
Click to collapse
Well I think we already have too many CM version to test...No Stable version exists for cm7 though 1.3.2 of superkid is mighty close....
Even nightlys do have specs if you go through the sites....

Malooga said:
I think the idea with nightlies(official ones anyway) is that the users find all the bugs so the stable version can be updated with only the things that work, although i may be completely wrong
Click to expand...
Click to collapse
you are right. i test every release before i upload it. if i found bugs i will not release it. but mainly the users should tell me what they find.

vampire36 said:
Well I think we already have too many CM version to test...No Stable version exists for cm7 though 1.3.2 of superkid is mighty close....
Even nightlys do have specs if you go through the sites....
Click to expand...
Click to collapse
do not get me rom, but nightlys are not stable cm7 roms, they are nighlys with the most features in it. and if you find one rom too much.....don't test others

trismegistos said:
do not get me rom, but nightlys are not stable cm7 roms, they are nighlys with the most features in it. and if you find one rom too much.....don't test others
Click to expand...
Click to collapse
Lol guess u took it d wrong way...i seriously appreciate the work you do...so I suggested so that more ppl would download you rom...thats it...
I didnt mean to be offensive by any stretch of imagination

vampire36 said:
Lol guess u took it d wrong way...i seriously appreciate the work you do...so I suggested so that more ppl would download you rom...thats it...
I didnt mean to be offensive by any stretch of imagination
Click to expand...
Click to collapse
ok got you wrong

trismegistos said:
ok got you wrong
Click to expand...
Click to collapse
Btw dn't worry i test all d cfws released thru d day at nyt...
so wud test both ur releases today...
btw zulugen d download link d same as prev for new version...didnt find a new link i guess

Just my 2 cents, but I'm thinkig, there's no need of CM nightlies. We should focus first on a real stable version, like superkid's one.

We are all working together on making the cm... we are all on the same team.. and what he does can help me, and what i do can help him

hi trismegistos
Does your rom contain some custom kernel or do I need to flash Tiamat?

I agree with that, but I think it's more useful to focus on a stable version rather than on a nightly build.

Igl0 said:
I agree with that, but I think it's more useful to focus on a stable version rather than on a nightly build.
Click to expand...
Click to collapse
please use an other thread for your discussion on what YOU think is needed and what not .

KT747 10/3 wont boot

When I flash the KT747 kernel it doesn't boot, never even gets to the boot animation. (EDIT: Updating from 9/23)

breakfast was yum...

droidstyle said:
breakfast was yum...
Click to expand...
Click to collapse
What???

I just installed. Everything good

Are you installing the correct version of the kernel for the base you are using and are you unlocked.

PoLoMoTo said:
What???
Click to expand...
Click to collapse
I posted that because the op's information was about as pertinent as my previous post. Rule of thumb, if ya want help, no problem...but atleast give us some information to work with.

What ROM are you trying to boot on? Chances are there are some merges in the new Kernel that will make an older ROM not boot.
Example: I was on CM10 M1. Couldn't boot on any of Faux's new kernels or KT747. Old ROMS didn't have new merges necessary to boot with newer kernels that had them..
or something like that. Solution - update to a newer ROM.

prdog1 said:
Are you installing the correct version of the kernel for the base you are using and are you unlocked.
Click to expand...
Click to collapse
Yes I was installing the AOSP JB verison
droidstyle said:
I posted that because the op's information was about as pertinent as my previous post. Rule of thumb, if ya want help, no problem...but atleast give us some information to work with.
Click to expand...
Click to collapse
So you couldn't just say that? You had to be a **** about it?
Zalithian said:
What ROM are you trying to boot on? Chances are there are some merges in the new Kernel that will make an older ROM not boot.
Example: I was on CM10 M1. Couldn't boot on any of Faux's new kernels or KT747. Old ROMS didn't have new merges necessary to boot with newer kernels that had them..
or something like that. Solution - update to a newer ROM.
Click to expand...
Click to collapse
I'm running MIUI 2.9.7, worked with 9/23 can't see why it would work with 10/3
If the issue is ROM related I guess I'll just wait for an update on the rom

PoLoMoTo said:
Yes I was installing the AOSP JB verison
So you couldn't just say that? You had to be a **** about it?
I'm running MIUI 2.9.7, worked with 9/23 can't see why it would work with 10/3
If the issue is ROM related I guess I'll just wait for an update on the rom
Click to expand...
Click to collapse
There are new merges from 9/27 that will make roms older than that incompatible.

Zalithian said:
There are new merges from 9/27 that will make roms older than that incompatible.
Click to expand...
Click to collapse
Thanks, guess I wont be updating till Miui updates. We are due for one since the last one was from 9/12

PoLoMoTo said:
Yes I was installing the AOSP JB verison
So you couldn't just say that? You had to be a **** about it?
I'm running MIUI 2.9.7, worked with 9/23 can't see why it would work with 10/3
If the issue is ROM related I guess I'll just wait for an update on the rom
Click to expand...
Click to collapse
wasnt being a ****, you must be very sensitive....

Temasek unofficial cm-12.1 builds

This thread is for updates of temasek cm12.1 built by myself. I will be building for hlte and hltespr.
Temasek made this all possible and it is all his work I am just taking the time to build and upload.
V19.3+ root removed, you will need to flash SuperSU zip to achieve root.
Downloads:
Hlte or Hlte on my BasketBuild
Hltespr or Hltespr on my BasketBuild
Credits: @temasek
XDA:DevDB Information
Temasek cm-12.1 unofficial cyanogenmod, ROM for the Samsung Galaxy Note 3
Contributors
trader418, Temasek
Source Code: https://github.com/temasek/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: Cyanogenmod
Version Information
Status: Beta
Created 2016-03-26
Last Updated 2016-03-26

Thanks for keeping support for the Note 3 alive.

Great, good to see 12.1 back alive. Anything I can do to help, just say so.

Thanks again! Always willing to help however I can.
BTW, really good job on creating the thread using just your phone! I've seen FAR worse.

Buslova said:
Thanks again! Always willing to help however I can.
BTW, really good job on creating the thread using just your phone! I've seen FAR worse.
Click to expand...
Click to collapse
Haha thank you, I try my best
Glad to see all of you guys showing support. If I ever don't see temasek updated the version and any of you do just post here and I'll build, however I think most of the time I should be okay. I'm going to set up a straw poll in the include root vs not include. I also could start to use the ota app if you guys really would like that

Straw poll whether to include root in the build here http://strawpoll.me/7191529

trader418 said:
Haha thank you, I try my best
Glad to see all of you guys showing support. If I ever don't see temasek updated the version and any of you do just post here and I'll build, however I think most of the time I should be okay. I'm going to set up a straw poll in the include root vs not include. I also could start to use the ota app if you guys really would like that
Click to expand...
Click to collapse
I will always use root however I understand some people's need for it to be rootless and well, let's be honest, it ain't hard to flash supersu right after flashing the rom. lol.
OTA is a nice lazy option for the USER but I've gathered from past posts in other threads that it's not always so easy for the dev since the OTA app is maintained/owned by another dev and sometimes has issues. Again, we're talking about a community here who is flashing custom roms on their devices. Manually downloading and flashing shouldn't be a major issue.
Having said all that, if i were to vote I'd say:
Built-in root: No
OTA: Yes (if it's not a headache)

Buslova said:
I will always use root however I understand some people's need for it to be rootless and well, let's be honest, it ain't hard to flash supersu right after flashing the rom. lol.
OTA is a nice lazy option for the USER but I've gathered from past posts in other threads that it's not always so easy for the dev since the OTA app is maintained/owned by another dev and sometimes has issues. Again, we're talking about a community here who is flashing custom roms on their devices. Manually downloading and flashing shouldn't be a major issue.
Having said all that, if i were to vote I'd say:
Built-in root: No
OTA: Yes (if it's not a headache)
Click to expand...
Click to collapse
Ota isn't too bad, I'll probably use it soon tbh, but I won't promise anything

hey guys, I have been having trouble with tema's cm 13 builds so i decided to give 19.1 a shot. Unfortunately, I haven't had any luck with the rom. The rom just boot loops after every installation. I have tried with gapps aroma and pico with different wipes with no luck. continues to bootloop as soon as I reboot and i never get into the rom. I am back on tema's for now but would love to switch to 19.1 if I could get some help. Sorry for being a noob, Im probably messing something up somewhere and I thank you for your help in advance!

redfuryjr55 said:
hey guys, I have been having trouble with tema's cm 13 builds so i decided to give 19.1 a shot. Unfortunately, I haven't had any luck with the rom. The rom just boot loops after every installation. I have tried with gapps aroma and pico with different wipes with no luck. continues to bootloop as soon as I reboot and i never get into the rom. I am back on tema's for now but would love to switch to 19.1 if I could get some help. Sorry for being a noob, Im probably messing something up somewhere and I thank you for your help in advance!
Click to expand...
Click to collapse
Start with which device you have

trader418 said:
Start with which device you have
Click to expand...
Click to collapse
haha sorry! htlespr!

redfuryjr55 said:
haha sorry! htlespr!
Click to expand...
Click to collapse
I'm not sure mate, has anyone else got any suggestions?
There has been reports of multiple wipes and reboots and then flashing the ROM helps but I cannot say it will help

trader418 said:
I'm not sure mate, has anyone else got any suggestions?
There has been reports of multiple wipes and reboots and then flashing the ROM helps but I cannot say it will help
Click to expand...
Click to collapse
hmmm.. well I managed to get booted by installing temasek's last build (12.9 i think, the one from jan) along with his kernel. It booted fine and made it into setup. I then rebooted to recovery and dirty flashed you 19.1. Got bootlooped and said fk it and re-flashed the kernel and got into 19.1! Now that is great and all, but super weird/inconsistent. Also, once I got everything set up I could not turn on wifi or bluetooth; is this a known issue with a fix? Also, are there recommended installation instructions or is there a recommended kernel for you build? Thanks in advance for your help and patience with my noobness! Again I am on htlespr!

redfuryjr55 said:
hmmm.. well I managed to get booted by installing temasek's last build (12.9 i think, the one from jan) along with his kernel. It booted fine and made it into setup. I then rebooted to recovery and dirty flashed you 19.1. Got bootlooped and said fk it and re-flashed the kernel and got into 19.1! Now that is great and all, but super weird/inconsistent. Also, once I got everything set up I could not turn on wifi or bluetooth; is this a known issue with a fix? Also, are there recommended installation instructions or is there a recommended kernel for you build? Thanks in advance for your help and patience with my noobness! Again I am on htlespr!
Click to expand...
Click to collapse
All I know is that all my hlte builds are tested with a clean wipe and then a flash and reboot. I have no problems. I am using temaseks device tree so the only difference between his and my build should technically be root and ota app. Other than that it should be identical

trader418 said:
All I know is that all my hlte builds are tested with a clean wipe and then a flash and reboot. I have no problems. I am using temaseks device tree so the only difference between his and my build should technically be root and ota app. Other than that it should be identical
Click to expand...
Click to collapse
I am using this as my daily Rom, the only problems I get are the weather widget doesn't update and it wont connect to the wifi in my local hospital, I am using build v19.0 build date 17th of march, even my s-pen works !
I will test this later and post back results

swukjay said:
I am using this as my daily Rom, the only problems I get are the weather widget doesn't update and it wont connect to the wifi in my local hospital, I am using build v19.0 build date 17th of march, even my s-pen works !
I will test this later and post back results
Click to expand...
Click to collapse
Either change weather provider to another or customize your location. Sometimes yahoo weather isn't working well.
As for WiFi, check your dev options.

redfuryjr55 said:
haha sorry! htlespr!
Click to expand...
Click to collapse
Just in case - have updated your Modem and Bootloader to the latest? All wireless related problems might be connected to it.

eseregin said:
Just in case - have updated your Modem and Bootloader to the latest? All wireless related problems might be connected to it.
Click to expand...
Click to collapse
what modem/baseband should i use for htlespr? what is tested and working, does anyone know?

redfuryjr55 said:
what modem/baseband should i use for htlespr? what is tested and working, does anyone know?
Click to expand...
Click to collapse
Hmm, still no luck eh? I tried helping ya last night in the other thread. I'm also a hltespr user. I'm still running OH1 baseband however OK2 is the latest. Also, as I told you last night, I'm using an older version of TWRP recovery (ver. 2.8.7) however the latest is 3.0.0.
What baseband are YOU running? Go to settings, "About phone", and look for "Baseband version" and let us know. =)

redfuryjr55 said:
what modem/baseband should i use for htlespr? what is tested and working, does anyone know?
Click to expand...
Click to collapse
Sorry, I have different phone..
Might be the latest here
https://idlekernel.com/flash-tools/firmware/hltespr_SM-N900P/N900PVPUEOK2/
But I am far away from sure