Database Info

Micromax canvas 3d custom rom

_______________________________________ DGEEEK _________________________________
------------------------------------------------------------Read The whole Post -----------------------------------------------------
_____________________ 4.2.2 ROM FOR CANVAS 3D ___________________
Hi fnds here im present u the custom for micromax canvas 3d and my phone 3d (china) ....
Im not a developer of this custom rom i just port it to our device ...
This take me very long time to port this rom to our device :eek :....
so frnds i use extract system.img of micromax 3d and use as base rom.....:
and i use developer's sagarwep LegoIce™Galaxy S4v2 here is link to his rom http://forum.xda-developers.com/showthread.php?t=2458879
and gave a thanks to him....:good:
features:-
rom is touchwiz customized.
very smooth
samsung dialer
and much more
I am not responsible if you brick your device while flashing,so flash at your risk
Flashing instructions
you must be rooted and flashed custom recovery
Before doing anything take a cwm or twrp backup of your system
Now-
Go To Recovery Mode :
Switch off the Phone Press and hold "Volume Up & Down+ Power" Buttons
Select Recovery Mode by Volume Up
CWM:
1. - wipe data factory reset --> Yes--delete all user data
2. - wipe cache partition --> Yes--Wipe Cache
3. - advanced --> Wipe Dalvik Cache --> Yes--wipe dalvik cache
4, - Mounts and Storage--> format system --> Yes -- format system only
4. - install zip from sd --> - choose zip from sdcard --> - Suvi Rom for Canvas Lite.zip
5. - reboot System now
first boot take some time. so dont panic.
ALL 3D APPS LIKE 3D SPACE IS GONE AFTER FLASHING THE CUSTOM ROM
thanks to:-
(1) My family (without the permission i can't touch my pc )
(2) sagarwep (his legoice rom)
(3) xdadevelopers.com
And guy if u like my work please:angel:
Recharge my mobile number with any amount u want my number service provider is AIRCEL (Delhi India)
MY NUMBER IS
:angel: ( +917503332802 ) :angel:
PLEASE PLEASE PLEASE donate
Please donate to above mobile number to help me out from payment of my internet connection:...
here is the link:- http://d-h.st/NEG
POST 2 ====> NO APP INSTALLED AND MESSAGING FIX PATCH
hey guys i made full bugsfree fix for this rom...:laugh::laugh::laugh::laugh::laugh::laugh:
step 1 : flash the above custom rom properly [see installation instruction above ]
step 2: flash the 4_2_2_fix.zip in cwm and wipe cache and dalvik cache...
fix zip link ======> http://d-h.st/P6S
PLEASE HIT THE LIKE FOR APPRECIATE MY WORK AND MOTIVATION FOR NEWER STUFFS FOR OUR DEVICE

DGEEEK said:
_______________________________________ DGEEEK _________________________________
------------------------------------------------------------Read The whole Post -----------------------------------------------------
Hi fnds here im present u the custom for micromax canvas 3d and my phone 3d (china) ....
Im not a developer of this custom rom i just port it to our device ...
This take me very long time to port this rom to our device :eek :....
so frnds i use extract system.img of micromax 3d and use as base rom.....:
and i use developer's sagarwep LegoIce™Galaxy S4v2 here is link to his rom http://forum.xda-developers.com/showthread.php?t=2458879
and gave a thanks to him....:good:
features:-
rom is touchwiz customized.
very smooth
samsung dialer
and much more
I am not responsible if you brick your device while flashing,so flash at your risk
Flashing instructions
you must be rooted and flashed custom recovery
Before doing anything take a cwm or twrp backup of your system
Now-
Go To Recovery Mode :
Switch off the Phone Press and hold "Volume Up & Down+ Power" Buttons
Select Recovery Mode by Volume Up
CWM:
1. - wipe data factory reset --> Yes--delete all user data
2. - wipe cache partition --> Yes--Wipe Cache
3. - advanced --> Wipe Dalvik Cache --> Yes--wipe dalvik cache
4, - Mounts and Storage--> format system --> Yes -- format system only
4. - install zip from sd --> - choose zip from sdcard --> - Suvi Rom for Canvas Lite.zip
5. - reboot System now
first boot take some time. so dont panic.
ALL 3D APPS LIKE 3D SPACE IS GONE AFTER FLASHING THE CUSTOM ROM
thanks to:-
(1) My family (without the permission i can't touch my pc )
(2) sagarwep (his legoice rom)
(3) xdadevelopers.com
And guy if u like my work please:angel:
Recharge my mobile number with any amount u want my number service provider is AIRCEL (Delhi India)
MY NUMBER IS
:angel: ( +917503332802 ) :angel:
PLEASE PLEASE PLEASE donate
Please donate to above mobile number to help me out from payment of my internet connection :crying :...
here is the link:- http://d-h.st/NEG
Click to expand...
Click to collapse
that was fast 2 post an already asking fore donations not a good way to start a thread

Plz fix error in this rom
no apps are installing from niether play store nor manually. unknown source is ticked off. plzz fix it ... plzz

sd9126 said:
no apps are installing from niether play store nor manually. unknown source is ticked off. plzz fix it ... plzz
Click to expand...
Click to collapse
ok im working on it...i need some time to fix it because i have to attend the exams..

Bugs results
Hi, I really like your work but I am having a bug issue with the ROM. That's why I switched back to my stock ROM. I hope you can fix these bugs.
1. App not installed issue when installing apk files
2. Messaging - Can't receive messages but I don't know if it can send
3. Sim toolkit - Not functioning
I hope you can fix this. And goodluck with your exams.

Hi how to install it wont work for me
What is touchwiz

Sim Toolkit Not Functioning
Hello I tested your ROM and I loved it but there's some minor problem left.
1. Sim Toolkit is force closing everytime I opened the STK
2. Bluetooth issue - I can't find other devices. What I did to fix this is to send any apps from using other phone from my phone and after sending apps to my phone it automatically display in the bluetooth.
That's all I hope you can fix this. Thanks.

Bugs
its seems that the messaging and installing and updating app is not working for me and also there are some minute bugs. please fix it.......
and please make the status bar transparent and system menu like original s4.
Thanks

please port micromax 3d to kitkat
kitkat port 4.4.2 to micromax canvas 3d help
Let go to kitkat 4.4.2 system ui

buju123 said:
its seems that the messaging and installing and updating app is not working for me and also there are some minute bugs. please fix it.......
and please make the status bar transparent and system menu like original s4.
Thanks
Click to expand...
Click to collapse
you need to root your phone and download xposed installer and install the farework and download gravity box app then enable it on module in xposed app (just google it u find the information how to do.):laugh::laugh::good: :good: please hit like if i help you

legoice
Hi deven
I have some problems with this rom like
Less ram free as compared to stock rom
Screens option in settings not working
Some apps like chaton is available in this rom in play store which used to be in stock rom
The resolution of shut animation is not good as it is set to 720*1280 instead of 480*800
Much lags while browsing net
The web pages become unresponsive
Google voice recognization is not working in google now
Gaming experience is very poor
Now very much good benchmarks
No multiwindow support
Some times when i press lock key to unlock it comes blurred rgb screen(as we can se when no network in tv)
I think u would understand my problems and do some thing fruitful
Plz....... Try to port legoice s4 fusion rom from canvas a92 canvas lite a very good rom
Thnx in advance..........deven

DGEEEK said:
you need to root your phone and download xposed installer and install the farework and download gravity box app then enable it on module in xposed app (just google it u find the information how to do.):laugh::laugh::good: :good: please hit like if i help you
Click to expand...
Click to collapse
Please make a complete working rom without any problems or you can make cyanogenmod for this phone, Micromax canvas 3d.
Thanks
---------- Post added at 07:48 AM ---------- Previous post was at 07:40 AM ----------
DGEEEK said:
you need to root your phone and download xposed installer and install the farework and download gravity box app then enable it on module in xposed app (just google it u find the information how to do.):laugh::laugh::good: :good: please hit like if i help you
Click to expand...
Click to collapse
Please make a complete working rom without any problems or you can make cyanogenmod for this phone, Micromax canvas 3d.
Thanks

Messaging Support
Hello sir, can you port the messaging apk of samsung galaxy s4 to this ROM?

Bugs
I found transition bugs in the home page..
Plss try to fix it.
Can u pls create z1 ROM for canvas 3D..

cool...thx for Rom.....:good:

Increase rom
DGEEEK said:
you need to root your phone and download xposed installer and install the farework and download gravity box app then enable it on module in xposed app (just google it u find the information how to do.):laugh::laugh::good: :good: please hit like if i help you
Click to expand...
Click to collapse
thanx bro & please creat a new rom for increase ram in micromax canvas a115 3d please......:

1 bug left
otg cable not working please fix this issue:crying:

could you plz guide me how to port that phone.

awesome working flawless
DGEEEK said:
_______________________________________ DGEEEK _________________________________
------------------------------------------------------------Read The whole Post -----------------------------------------------------
_____________________ 4.2.2 ROM FOR CANVAS 3D ___________________
Hi fnds here im present u the custom for micromax canvas 3d and my phone 3d (china) ....
Im not a developer of this custom rom i just port it to our device ...
This take me very long time to port this rom to our device :eek :....
so frnds i use extract system.img of micromax 3d and use as base rom.....:
and i use developer's sagarwep LegoIce™Galaxy S4v2 here is link to his rom http://forum.xda-developers.com/showthread.php?t=2458879
and gave a thanks to him....:good:
features:-
rom is touchwiz customized.
very smooth
samsung dialer
and much more
I am not responsible if you brick your device while flashing,so flash at your risk
Flashing instructions
you must be rooted and flashed custom recovery
Before doing anything take a cwm or twrp backup of your system
Now-
Go To Recovery Mode :
Switch off the Phone Press and hold "Volume Up & Down+ Power" Buttons
Select Recovery Mode by Volume Up
CWM:
1. - wipe data factory reset --> Yes--delete all user data
2. - wipe cache partition --> Yes--Wipe Cache
3. - advanced --> Wipe Dalvik Cache --> Yes--wipe dalvik cache
4, - Mounts and Storage--> format system --> Yes -- format system only
4. - install zip from sd --> - choose zip from sdcard --> - Suvi Rom for Canvas Lite.zip
5. - reboot System now
first boot take some time. so dont panic.
ALL 3D APPS LIKE 3D SPACE IS GONE AFTER FLASHING THE CUSTOM ROM
thanks to:-
(1) My family (without the permission i can't touch my pc )
(2) sagarwep (his legoice rom)
(3) xdadevelopers.com
And guy if u like my work please:angel:
Recharge my mobile number with any amount u want my number service provider is AIRCEL (Delhi India)
MY NUMBER IS
:angel: ( +917503332802 ) :angel:
PLEASE PLEASE PLEASE donate
Please donate to above mobile number to help me out from payment of my internet connection:...
here is the link:- http://d-h.st/NEG
POST 2 ====> NO APP INSTALLED AND MESSAGING FIX PATCH
hey guys i made full bugsfree fix for this rom...:laugh::laugh::laugh::laugh::laugh::laugh:
step 1 : flash the above custom rom properly [see installation instruction above ]
step 2: flash the 4_2_2_fix.zip in cwm and wipe cache and dalvik cache...
fix zip link ======> http://d-h.st/P6S
PLEASE HIT THE LIKE FOR APPRECIATE MY WORK AND MOTIVATION FOR NEWER STUFFS FOR OUR DEVICE
Click to expand...
Click to collapse
Thank you so much buddy , really many many thanks, i was frustrated with my Canvas 3D, now i love my canvas new look and performance.

Thanks !
This was first ROM which got booted properly on my device

[EOL][RECOVERY] Modified CWM (non-touch) for port to all MTK phones[EOL]

This is a Clockworkmod modified (very) recovery.
DISCLAIMER:
Rooting your phone and using custom Recoveries and ROMS have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledges about phones and phones utilities too.
Make sure that whatever you do, you are doing it at your own responsibility.
Update (21-apr-2015):
This is the last batch of builds for porting. I won't do that anymore.
- new GUI theme;
- an extra version with swipe touch support;
- cleaned up the source code;
- reset battery stats option;
- wipe all - preflash option;
- removed nvram backup/restore because it can corrupt the bootloader;
-full track of changes here.
I used it as base for my touch recovery. Basically is a CWM 6.0.3.7 for jellybean and CWM 6.0.5.1 for kitkat modified by me with many extra features.
- aroma file manager menu
- rainbow mode menu
- separate power menu
- separate wipe menu
- nvram backup/restore menu
- advanced backup/restore menu
- toggle signature, toggle md5sum.
To port it follow my new guide from here
All screenshots are made with my new tool from here.
For jellybean version currently there are two lunfile paths in the world of mtk phones. This will make your USB Mass storage to work in recovery or not. Search that path in your device to see what you have.
Lunfile path 1 (old): "/sys/devices/platform/mt_usb/gadget/lun%d/file" - this can be found in many devices mt6572, mt6589, mt6589T, and other old ones.
Lunfile path 2 (new): "/sys/devices/platform/mt_usb/musb-hdrc.0/gadget/lun%d/file" - this is related to new devices mt6582, mt6592...
Find where is your path and download the image to port from correct section.
Depending of your resolution width, choose an image which contains exactly that value or one close to it, and follow the tutorial to port it.
CREDITS:
- Philz-cwm6 - for get partition size method;
- C3C0 - for initial mtk tweack hint - Unused now;
- Koush and all CWM team for the recovery;
- bgcngm for unpack/repack utils;
- sk8erwitskil for aromafm menu
RULES for posting your ports!
If you managed to port this to your device, add proper credits in your thread, post or article.

List of compiled or ported recoveries for various devices.
Lenovo S660 (CN version S026)
THL T100S
THL T11
Elephone P7 mini
Bluboo X1 (mt6582)
Doogee Rainbow DG210
Kuphone 1phone 5s (sanstar72_wet_jb3)
iNew V3 for fw versions up to 1.0.7 (different kernel)
ONN M7 tablet
ZTE V967S
XOLO A500s
XOLO A600
ZOPO ZP999
LAVA Iris 458Q
Wiko Darkfull
Elephone P6000
Ulephone Be Pro
Acer Liquid Jade S (S56)
Acer Liquid Z410

Nvm. Got a black screen same with CTR recovery. Any help?

gatgat23 said:
Nvm. Got a black screen same with CTR recovery. Any help?
Click to expand...
Click to collapse
Usually that means the recovery is bigger than the recovery partition. It happens in some devices with an unusually big kernel (I saw kernels with 4.7 Mb for a recovery at 6 Mb - not much room for ramdisk). Other thing is if you use MobileUncleTools to flash it - this doesn't work in some cases, and you need to flash it with SPFT. Remember, if you have a small partition, any recovery bigger than 5.9 Mb (you need some reserved space) will not work. You can try to shrink some images, or to replace them with blank dummy pngs, but not for stitch and buttons. These have to remain in rgb format, otherwise you have that black screen again, and the phone will reboot to system.

carliv said:
Usually that means the recovery is bigger than the recovery partition. It happens in some devices with an unusually big kernel (I saw kernels with 4.7 Mb for a recovery at 6 Mb - not much room for ramdisk). Other thing is if you use MobileUncleTools to flash it - this doesn't work in some cases, and you need to flash it with SPFT. Remember, if you have a small partition, any recovery bigger than 5.9 Mb (you need some reserved space) will not work. You can try to shrink some images, or to replace them with blank dummy pngs, but not for stitch and buttons. These have to remain in rgb format, otherwise you have that black screen again, and the phone will reboot to system.
Click to expand...
Click to collapse
My device's recovery partition got 6MB. Ported recovery got 5.4MB.
I actually used MobileUncleTool to flash, then I tried to flash using SPFT.
Same issue, black screen. Need to reinsert battery to reboot.

gatgat23 said:
My device's recovery partition got 6MB. Ported recovery got 5.4MB.
I actually used MobileUncleTool to flash, then I tried to flash using SPFT.
Same issue, black screen. Need to reinsert battery to reboot.
Click to expand...
Click to collapse
Try to access the recovery log from temp directory (cache/recovery/last.log), after that happens. If there is nothing there, than the phone didn't even boot in recovery, otherwise you will see where it's stuck.

I think it actually didn't boot recovery.
Log's showing what I did when I was still on Stock Recovery. (Wipe data/cache)
Even the .prop values are using stock ones. (I changed adb secure, debuggable, etc in the one I ported.)

hello carliv,
is it possible to have a version 1.4 with custpack?

@carliv
Thanks for your activity.
Are this recovery compatible with most recent Mediatel ROM based on Android 4.4?

bovirus said:
@carliv
Thanks for your activity.
Are this recovery compatible with most recent Mediatel ROM based on Android 4.4?
Click to expand...
Click to collapse
All my recoveries are compiled on cm-10.1 building environment and in theory they will work better with kernels built for android 4.2 top (in these builds are missing sepolicy files and all selinux related files), but some users report that they used it for flashing and backup lenovo kitkat (vibeUI something) and it was successfull. I can't test that, but my advice is if you have an official Android 4.4 mtk powered phone, I'm sure the recovery partition is bigger than 6Mb, and for that I would recommend you PhilZ recovery if you want to stay on CWM base, or TWRP. I made my recoveries with only one reason in mind: to be small enough to fit a recovery partition of 6Mb.

Thanks for the explanation. What's about Androdi 4.3 compatibility? Like 4.4 ?
Recovery compatibility
Android 4.2.x - OK
Android 4.3.x - ?
Android 4.4.x - ?
Note: personally I like the non touch recovery.
Do you have a link for Philz recovery for Mediatek chipset?
Thanks again.

bovirus said:
Thanks for the explanation. What's about Androdi 4.3 compatibility? Like 4.4 ?
Recovery compatibility
Android 4.2.x - OK
Android 4.3.x - ?
Android 4.4.x - ?
Note: personally I like the non touch recovery.
Do you have a link for Philz recovery for Mediatek chipset?
Thanks again.
Click to expand...
Click to collapse
I think it should work in Android 4.3 but I have no feedback on it. The reason is there are very few mtk devices with Android 4.3 or 4.4 (real not spoofed), and I didn't tested personally any of them.
For PhilZ recovery you can check his official thread http://forum.xda-developers.com/showthread.php?t=2201860 , that support mtk devices nativelly, but you must compile it in cm-11 source,
or the mtk dedicated one started by my friend @yuweng here http://forum.xda-developers.com/showthread.php?t=2748169

The PhilZ recovery require many times a recovery partition bigger than 6MB.
In many acses teh recovery partition is limirted to 6MB.
For this if you can create your recovery from CW11 (compatible with KK) you can sue it.

bovirus said:
The PhilZ recovery require many times a recovery partition bigger than 6MB.
In many acses teh recovery partition is limirted to 6MB.
For this if you can create your recovery from CW11 (compatible with KK) you can sue it.
Click to expand...
Click to collapse
If a mtk phone gets Kitkat then I assure you the recovery and boot partition will be increased by producer in that firmware along with the new kernel. The 6Mb partition is specific to 4.1.x-4.2.2 devices. For these even my recovery, if it's built in CM11, will oversize 6 Mb because of the new modules.

gzip support
Thanks for this non-touch version! Can you update to include the gzip support as in the latest touch version? Thanks.

Hey Sir @carliv.
I ported this recovery to Xolo A500s.Please add it device list.
Here is the link:-Click here

port
Hi Sir ,
I ported it for my device XOLO A600
Please update it in device List .
Thanx Again
Here Is the Link

CWM Recovery MTK 6.0.3.7 carliv non-touch
Hi all!
I just combined some scripts to have a auto make custum recovery.
It is based on BM / michfood / yuweng / carliv work! Version 2014-06-29. See beginning of this thread.
Thank you!
usage: cwmr.bat stock-recovery.img
MTK6575 and MTK6577 tested. May work with MTK6589... (option 3 -> MTK6577)?
It is a question if fstab is matching. It is complete batch source, so you can adapt to alternate partition tabel.
Have fun!
EDIT:
What I did:
I took "old lunfile path" "normal font" file from carliv first thread, I extracted it and added to some old scripts from yuweng (I cannot find anymore to download). I tested it and made it public to all.

The latest CWM is 6.0.4.4 and Carliv release this update. Should be possible to aplly it?

Well, I am not sure about what I understand. You can use my upload and mod it any way you like. I hope to have helped to get latest CWM Recovery.

MiUi V6 looks like 4.11.7 ROM (update) For MicroMaX Canvas 2+ A110Q

SYSTEM PARTITION NEEDED
Features of MiUi rom on MicroMaX Canvas 2+ A110Q
Here is a fully miui V5 4.11.7 ported from Star n7589 device.
- MiUi 4.2.2
- Good Battery Backup
- Playing Games Smoothly
- Buttery Smooth
- 3G SIM Switch
- Sim Toolkit
- Init.d Scripts
- Full dual sim support
- Fast, smooth, stable
- Extended power menu
- 3G active sim card switch
- Some layouts fixes
- Deleted all useless chinese apps
- MIUI camera WORKING inc front camera videorecording!
- 2G/3G toggle fixed
- EngineerMode built-in
- VIPER4ANDROID built-in
And Many More.........
UPDATE 4.11.7
Bugs :
Tell if you see any more....
How To Flash :
use CWM Recovery AND system partition needed.
For New Installation :
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
Note For Updaters: Users on Miui 4.10.31 ROM Please Do Not 'Wipe Data/Factory Reset' or do nothing JUST FLASH the .zip You will update to Miui 4.11.7.
(It will take around 5 Min. for first boot)
** feature updates **
1) Go to Cwm recovery
2) Select install from zip
3) select .zip and yes
4) Reboot.
Screen Shots
If flashing CUSTOM BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : 4pda, xda developers. If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar )
DOWNLOADS
Mirror1
Mirror2
Super Clear & Loud Sound Patch
XDA:DevDB Information
MiUi V6 looks like 4.11.7 ROM (update) For MicroMaX Canvas 2+ A110Q, ROM for the Micromax Canvas 2 Plus A110Q
Contributors
theswapnil
Source Code: http://4pda.ru/forum/index.php?showtopic=458600&st=3620#entry34614140
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2014-11-12
Last Updated 2014-11-12

hey i am using miui rom v4.3.24 how to install this rom ?

Custom ROM Links for Micro Max Canvas a111

Rom Name‬​RJ_A111_DDX_KKT_V3​
A very Impressive ROM to all of Micromax Canvas A111.
It's a STOCK Deodexed ROM.
Themed Like Kitkat 4.4
Base ROM for all My ROMS
ROM Features::
Pure Deodexed
[*]KIT-KAT 4.4 Launcher
[*]Pre-Rooted
[*]Zip align apps in "/system" and apps in "/data" every reboot which result in less RAM usage.
[*]Build.prop tweaks and improvements.
[*]Games are Running smoothly with less lag and is very playable !
[*]KITKAT 4.4 THEMED
[*]Lightweight Music player with @Viper4android fx v2.3.1.5 auto driver no need busy box now to run it
[*]Media(Sounds & Boot and Shut Down) Changed
[*]Fonts Changed
[*]Good Battery Backup
[*]Highly Themed Like KITKAT
[*]NOTE:: Impotent thing enable Stand-alone mode in messages
for this go Messages>>settings>>choose Stand-alone mode.
[*]if u still facing Problem with Messaging Just Go Patch here http://www.mediafire.com/download/6cslh9vhpcmklks/Mesaging_Patch.zip
BUGS::
Panorama & Video Mode not working in KK 4.4 Camera that's why added stock camera with 4.4 camera
NOTE‬::
I informing again Flash on your own responsibility. This ROM is working and tested on my phone​Download Links
Dev Host-- RJ_A111_DDX_KKT_V3
MediaFire-- RJ_A111_DDX_KKT_V3
Dropbox-- NOT AVAILABLE​
------------------------------------------
PROCEDURE TO FLASH ROM ::
------------------------------------------
Install Through TWRP or CWM Recovery
[*]Wipe & delvik cache
[*]Factory Reset
[*]Install Zip from SD Card
[*]Wipe & delvik cache
[*]Finally Reboot
After Boot Logo wait for 5 min to Boot-up.
My Another ROMs & Guides Works
1. RJ_MS5_Flare_Droid_V4 -- http://forum.xda-developers.com/canvas-doodle-2/general/rom-rjms5flaredroidv4wififix-t2983800‬
2. [GUIDE]Newbie Guide for How to Root/Flash Recovery/UNBRICK on Canvas A111-- http://forum.xda-developers.com/canvas-doodle-2/general/rom-rjms5flaredroidv4wififix-t2983800‬

I have flashed this rom and used it. Well the rom is smooth as hell and ram optimsation is toooo good. But I found the notification panel look awkward and I guess the font reminds me of samsung devices ... Well the holo theme background was :sly: ... Well I changed it with xblast ... But great rom :thumbup:
Sent from my [email protected] MIXperia

Nos ROYA/Orange ROYA/Alcatel POP2/OT 5042X ROOT RECOVERY ROMS

Attention always make a nandroid backup and only recover that backup in the recovery that was created !!!
I am not responsible for any problems with the terminal, or give assistance in any case, whether is softbrick or hardbrick, use at your own risk ...
All roms (*) have their pros and cons and the most stable for everyday use is Carbon 245 and the Russian stock 1008, all cm-based, except the carbon, have a bug in the sound (with microphone and speakers giving very low sound)
ROOT:
KingRoot download
Update SuperSU to install in custom recovery download
Recovery:
CWM download
TWRP download
App to install recovery - download
Roms:
All here
OTU to recover "bricked device" download
GAPPS KK for roms without google app's download
Patches:
custpack2system
for use in roms not based on stock who lack space in the system folder
system2custpack
to recover the partition custpack to use stock roms or stock-based
mac fix
for those who missed the mac address
fastboot fix
for those who can not boot into fastboot
(*)For those installing a custom and is unable to make calls simply open the build.prop file and edit the following line:
persist.radio.multisim.config = dsds by persist.radio.multisim.config = single
For all possible tunings this terminal use this program: download
Down This line is only informative and for experienced devs:
DANGER
...
Software unstable, possible brick with no possible salvation
...
Do not continue if you are unsure of which that you can destroy the equipment
...
Only for very experienced Dev's & Testers
​
​CM12.1:
cm12_alto45
cm12.1_Alto45_#1
cm12.1_Alto45_#2
cm12_debuggable_boot.img
​
Android Kitchen:
​download
​
Android L recovery:
download
​
5042w (stock lollipop):
download
Thank's to Gaddan and Dead Link (4pda)

It is posible to flash traceability file from 5042w to get lolipop upgrade for 5042x trough OTU ?

All links are dead.
Is there any posibility to reupload at least these stable ones?

Hello, if it helps....
I have Spanish STOCK ROM for model 5042D (Alcatel OneTouch Pop 2 [4.5]).
Here is my backup, done with TWRP: https://mega.nz/#F!AtQgHapY!FcuPH2-dlz9aQBbYPaaXZw
Simply put unziped TWRP folder in your SDcard and boot into TWRP recovery. Wipe all and then restore my rom.

Any updates this is the newish pixi charm as well

http://miuipro.ru/rommgr/device_view/451
best MIUI ever!

Any Cyanogen MOD out there that fits good on this 5042D ?
Any other lolipop or Marschmallow rom?

Alcatel pop2 - 5042
bruno504 said:
Any Cyanogen MOD out there that fits good on this 5042D ?
Any other lolipop or Marschmallow rom?
Click to expand...
Click to collapse
You'll find several custom rom on this russian post
http://4pda.ru/forum/index.php?showtopic=645507#
Enjoy

Please help me with link to recover custpack i realy neeeed ittt !!!!

I need rom for 5042x ... Please >>>