Huy guys, very strange issue on my XT1080M.
I stopped using this phone a couple of months ago when I got my Moto X and then work provided me with a different device. The phone went dead at some point, and now, even after plugging it in and letting it charge, it will NOT boot up. It will not progress past the Motorola screen. The screen comes on, it vibrates, and then it gets stuck. The Moto logo is the same color every single time (purple) instead of changing.. thought that was interesting.
The phone had a pending software update that I never took, and I wonder if something prompted it to actually start the update instead. Either way, I downloaded the 4.4.4 fxz files and flashed it in RSDLite. The flashing went through successfully, but it still will not boot. Fastboot is accessible, but if you pick "Recovery", it shows the Moto logo, then comes back to the Fastboot screen and says "Boot up failed".
I re-downloaded and reflashed the files thinking maybe something is corrupt, but it still won't boot.
I really hate to lose this phone as it'd be really great to have as a backup, but I'm really out of any ideas. Bootloader is locked. Device was originally rooted and "security unlocked" with rockmymoto and whatever the security off program was (it's been a while..)
Any ideas at all?
digitaloutsider said:
Huy guys, very strange issue on my XT1080M.
I stopped using this phone a couple of months ago when I got my Moto X and then work provided me with a different device. The phone went dead at some point, and now, even after plugging it in and letting it charge, it will NOT boot up. It will not progress past the Motorola screen. The screen comes on, it vibrates, and then it gets stuck. The Moto logo is the same color every single time (purple) instead of changing.. thought that was interesting.
The phone had a pending software update that I never took, and I wonder if something prompted it to actually start the update instead. Either way, I downloaded the 4.4.4 fxz files and flashed it in RSDLite. The flashing went through successfully, but it still will not boot. Fastboot is accessible, but if you pick "Recovery", it shows the Moto logo, then comes back to the Fastboot screen and says "Boot up failed".
I re-downloaded and reflashed the files thinking maybe something is corrupt, but it still won't boot.
I really hate to lose this phone as it'd be really great to have as a backup, but I'm really out of any ideas. Bootloader is locked. Device was originally rooted and "security unlocked" with rockmymoto and whatever the security off program was (it's been a while..)
Any ideas at all?
Click to expand...
Click to collapse
Which FXZ did you actually flash? Go through and manually flash the FXZ and see what happens. Also run an md5 check on the FXZ
Okay, manually flashed it using mfastboot. No difference. Still stuck on the purple Moto logo.
FXZ file used was 1FF-obake-maxx_verizon-user-4.4.4-SU4.21-release-keys.xml.zip from sbf.droid-developers.org.
These are the steps that I used:
mfastboot getvar max-download-size
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
MD5 matched. Argh.
digitaloutsider said:
Okay, manually flashed it using mfastboot. No difference. Still stuck on the purple Moto logo.
FXZ file used was 1FF-obake-maxx_verizon-user-4.4.4-SU4.21-release-keys.xml.zip from sbf.droid-developers.org.
These are the steps that I used:
mfastboot getvar max-download-size
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
MD5 matched. Argh.
Click to expand...
Click to collapse
Well im out of suggestions. May be bricked
digitaloutsider said:
Huy guys, very strange issue on my XT1080M.
I stopped using this phone a couple of months ago when I got my Moto X and then work provided me with a different device. The phone went dead at some point, and now, even after plugging it in and letting it charge, it will NOT boot up. It will not progress past the Motorola screen. The screen comes on, it vibrates, and then it gets stuck. The Moto logo is the same color every single time (purple) instead of changing.. thought that was interesting.
The phone had a pending software update that I never took, and I wonder if something prompted it to actually start the update instead. Either way, I downloaded the 4.4.4 fxz files and flashed it in RSDLite. The flashing went through successfully, but it still will not boot. Fastboot is accessible, but if you pick "Recovery", it shows the Moto logo, then comes back to the Fastboot screen and says "Boot up failed".
I re-downloaded and reflashed the files thinking maybe something is corrupt, but it still won't boot.
I really hate to lose this phone as it'd be really great to have as a backup, but I'm really out of any ideas. Bootloader is locked. Device was originally rooted and "security unlocked" with rockmymoto and whatever the security off program was (it's been a while..)
Any ideas at all?
Click to expand...
Click to collapse
Why don't you flash the XML with RSD lite, the 444 has no getvar or erase userdata lines in it.
aviwdoowks said:
Why don't you flash the XML with RSD lite, the 444 has no getvar or erase userdata lines in it.
Click to expand...
Click to collapse
He did. Look at the post you just quoted.
Same problem here. Rebooted one day, never booted back up. Can't get the phone to charge enough to even complete most flashing commands.
Well, I was able to get my hands on another DROID MAXX. Unfortunately, this one already has 4.4.4 so I'm screwed for being able to use Sunshine until some sort of 4.4.4 root comes out. Plus, the device is a 2013 model, so I can't get a BL code from that Chinese guy.
Sigh. Such is life!
digitaloutsider said:
Well, I was able to get my hands on another DROID MAXX. Unfortunately, this one already has 4.4.4 so I'm screwed for being able to use Sunshine until some sort of 4.4.4 root comes out. Plus, the device is a 2013 model, so I can't get a BL code from that Chinese guy.
Sigh. Such is life!
Click to expand...
Click to collapse
Can you flash a custom recovery and get it to boot to that using the broken device?
The old one had a locked bootloader.
Have you tried house of moto to flash yet?
what system version were you on prior to having problems?
I ran into this same issue and never recovered from it. I had an unlocked bootloader prior to attempting to recover. Now it fails to boot and shows the boot loader is now locked.
my moto x fails to boot up and shows no command when I boot up the phone. Fastboot shows boot up failed
I have one that's having a similar issue. Shows the Motorola logo then nothing. Stock ROM and nothing modified.
Edit: It's a Verizon model (If that has any bearing)
So is there no fix to this issue? I tried to flash a custom recovery using fastboot and got stuck in fastboot mode because the image was too large, and failure to flash.
Also now adb can't find the device
motorola droid max stuck black screen at BLBROKE. help me
Related
Hi guys, so i flashed a Moto G GPE rom onto my phone, got sick of seeing 3G rather then H or H+ and have decided to move back to Stock Retail.
I have a problem though when i use the guide on the FAQ ( the mfastboot way) everything i flash gets the okay appart from the system spasrsechunks? that gets some sort of error and it says error okay? Well apart from that after i reboot the phone, it has the warning sign but then uses the google bootanimation? ive left it on a good couple of minutes to see if it will boot but it doesnt seeem to want to..
Clarkiieh said:
Hi guys, so i flashed a Moto G GPE rom onto my phone, got sick of seeing 3G rather then H or H+ and have decided to move back to Stock Retail.
I have a problem though when i use the guide on the FAQ ( the mfastboot way) everything i flash gets the okay appart from the system spasrsechunks? that gets some sort of error and it says error okay? Well apart from that after i reboot the phone, it has the warning sign but then uses the google bootanimation? ive left it on a good couple of minutes to see if it will boot but it doesnt seeem to want to..
Click to expand...
Click to collapse
Google animation means that you still have the gpe rom on your phone. This happened to me before when i flashed the GPE rom too. What you need to do is flash your firmware again. Download the stock firmware form this guide: http://forum.xda-developers.com/showthread.php?t=2542219 Then what you need to do is run these commands MANUALLY! As in 1 by 1.
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
Yeah I sorted it thanks no 4.4.2 ROM would work trued multiple times until I tries a 4.3 and downgraded then it worked and updated to 4.4.2 ora
Sent from my XT1032 using Tapatalk
Hello Guys,
after a week using Paranoid Android my moto g xt1032 acted weird, so I reinstalled stock using fastboot.
I am pretty familiar with the use of fastboot and flashing and so on (Guess I've flashed, and fixed over 20 different phones)
But now I've come to the point I can't even fix my own phone.
What does it do?
Well, when I start my phone, it will only show the "warning bootloader unlocked" message, and just restarts and does the same.
Sometimes it even gives a blue screen > restarts.
I can boot into fastboot mode, I tried to flash a RETAIL UK 4.4.2 And RETAIL UK 4.3 stock firmware, even though I am from The Netherlands,
but UK or German roms are the closed to mine, and as far as my knowledge goes, EU firmware are usually the same.
I managed to go into stock recovery, but when I flash philz or twrp, it just stays at the "warning bootloader unlocked" screen.
Going to try XT1032_RETAIL-EU_4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF.xml.zip right now.
same result.
bump
bump
Try this - http://forum.xda-developers.com/moto-g/help/guide-recover-xt1032-gpe-4-4-4-t2824377
While my situation below may not be yours, at least this may get you back to a stable and functional device. I hope it helps. And as you are aware this will COMPLETELY wipe your phone. If you can, backup any pictures or files you want to keep before doing this.
My situation was like many others that had flashed a 4.4.4 GPE or custom ROM and ended up with a mini wifi tablet as the radio was off (as stated by dialing 8#8#4626#*#*). I have gone two days with no cell signal due to this. Trying to flash a stock image (http://sbf.droid-developers.org/phone.php?device=14) resulted in boot loops. I believe that is what everyone else is calling it. I never saw the loop as it stayed on the initial logo screen before the animation begins. Maybe it is looping fast and just showing the same screen again instead of it simply not changing. Oh well. I'm fixed now but on EU ROM. Now I'm attempting to install Blur_Version.174.44.1.falcon_umts.Retail.en.US. The EU ROM currently installed is 176.44.1, and while it works I simply want to be stock US version for now. I mention this because there is also a 174.44.4 US ROM on SBF-DROID-DEV. I tried that one (among many others) when trying to revive my phone. None of the stock images worked and I'm currently not happy with any of the custom ROMs. Stock or rooted stock will be good for me. On a tangent but I have a XT1032 purchased from AIO Wireless (now Criket but still part of ATT). Well AIO tweaked Motorola's ROM to disable tethering. I actually use Red Pocket for service (another ATT MVNO) and only bought from AIO becausse they had a sweet deal. Wasn't so sweet after I found I could not tether and after 6 months found a way to unlock bootloader, which cost another $25. In short it spent just as much money and had much frustration that could have been avoided if I had purchased directly from Motorola and got a FULLY stock and unlockable device.
---------- Post added at 11:51 PM ---------- Previous post was at 11:42 PM ----------
Pass this along also to anyone looking: theroot.ninja worked for me to unlock the bootloader (I've not posted enough to XDA so posting true URL is disabled. Google "sunshine bootloader unlock"). I found a vague reference on XDA somewhere but don't recall thread. Basically, certain carriers (like ATT and its MVNOs) have agreement with Motorola to restrict bootloader unlocking on devices they resell. Like I said, cost me $25, but it worked and I've wasted more $$ on less.
My bootloader is unlocked, I can't get into recovery, only fastboot.
and it stays at the "warning bootloader unlocked screen" aka logo screen, and it restarts so now and then.
When I start it up for the first time, the screen turns blue right away, and restarts, after a couple of restarts, it stays stuck on the logo screen :S
I tried lots of stock firmware, but none of them worked, I wonder if it's a hardware fault, but I reassembled everything, without success.
http://sbf.droid-developers.org no longer has the latest firmware images. You need to read through this thread instead:
http://forum.xda-developers.com/showthread.php?t=2546251
4.4.4 Recovery flashable Stock Motorola zips available here:
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
Regarding fastboot and the 4.4.4 firmware image - you are obviously not doing all the necessary commands. Please state the commands you have used. Since you have updated your bootloader, ensure you are actually attempting to flash a 4.4.4 image, as a 4.4.2 image will result in an error.
lost101 said:
http://sbf.droid-developers.org no longer has the latest firmware images. You need to read through this thread instead:
http://forum.xda-developers.com/showthread.php?t=2546251
4.4.4 Recovery flashable Stock Motorola zips available here:
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
Regarding fastboot and the 4.4.4 firmware image - you are obviously not doing all the necessary commands. Please state the commands you have used. Since you have updated your bootloader, ensure you are actually attempting to flash a 4.4.4 image, as a 4.4.2 image will result in an error.
Click to expand...
Click to collapse
I am pretty sure I am using 4.4.4
I used these commands:
Code:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
I suggest you add the follow command which will entirely wipe any remaining files your phone.
mfastboot erase userdata
lost101 said:
I suggest you add the follow command which will entirely wipe any remaining files your phone.
mfastboot erase userdata
Click to expand...
Click to collapse
Tried it, no change.
Jur13n said:
Tried it, no change.
Click to expand...
Click to collapse
The system flashing commands are wrong. They should be:
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
See if that fixes it for you.
meekrawb said:
The system flashing commands are wrong. They should be:
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
See if that fixes it for you.
Click to expand...
Click to collapse
system.img_sparsechunk.0
system.img_sparsechunk.1
system.img_sparsechunk.2
To be exactly, I know what I am doing
Jur13n said:
system.img_sparsechunk.0
system.img_sparsechunk.1
system.img_sparsechunk.2
To be exactly, I know what I am doing
Click to expand...
Click to collapse
Okay. Good luck!
Jur13n - did you try http://forum.xda-developers.com/mot...-gpe-4-4-4-t2824377/post55768571#post55768571. Once back to 'base' you can update to 4.4.4 OTA or flash another ROM. And if you get stuck again, re-run this process. Three downloads, a few scripts to run; double-click easy.
Good luck.
e.martin.howell said:
Jur13n - did you try http://forum.xda-developers.com/mot...-gpe-4-4-4-t2824377/post55768571#post55768571. Once back to 'base' you can update to 4.4.4 OTA or flash another ROM. And if you get stuck again, re-run this process. Three downloads, a few scripts to run; double-click easy.
Good luck.
Click to expand...
Click to collapse
http://sbf.droid-developers.org/phone.php?device=14 is offline atm, I'll try it.
What do you mean with three downloads o.o?
I only see him saying Blur_Version.174.44.1.falcon_umts.Retail.en.US
Your issue could be due to older images. Here is the EU Retail 4.4.4 image. It doesn't matter where you are in the world, it will work fine.
http://forum.xda-developers.com/showpost.php?p=54757500&postcount=348
lost101 said:
Your issue could be due to older images. Here is the EU Retail 4.4.4 image. It doesn't matter where you are in the world, it will work fine.
http://forum.xda-developers.com/showpost.php?p=54757500&postcount=348
Click to expand...
Click to collapse
Tried it, didn't work.
Going to try the Blur_Version.174.44.1.falcon_umts.Retail.en.US one right now.
-- edit --
no result, also tried to convert it to gpe, no result either.
I guess it's a hardware problem somehow (maybe reading the harddisk fails?)
If you still have the box that the phone came in look at it and it will tell you which Moto G you have.
Hi,
after an apparently failed attempt to install the 5.0 OTA update my XT1032 now will boot to a droid lying on its back.
I went to the recovery from there (by pressing VolUp+Power) and did the "factory reset/wipe data" and rebooted.
Same result.
I did "wipe chache". Same result: Droid lying on its back, saying "Kein Befehl" (I guess that means "no command")
I can get into recovery mode (CWM was installed before all this*) so I could try to flash stuff from outside.
But what should I try to flash? I tried flashing a (supposedly) stock system but as soon as I start with "fastboot flash boot boot.img" the phone starts booting again. So I am not really sure what to do now.
Something is seriously wrong with this phone and I would like to restore it to stock settings. I bought it on amazon.DE - so if any one of you guys knows where I could find a truly original stock image for this phone and what to do with it, please let me know.
PS: Right now I can't even get into recovery anymore. The thing just keeps booting and booting. Can't even turn it off.
* meaning: before I flashed the supposed stock recovery that apparently, in combination with the OTA update, got me into this mess
I now followed this guide:
http://forum.xda-developers.com/showthread.php?p=47820707#post47820707
I used option 3b with a 4.4.4 rom ( RETAIL-DE_4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF )
I excuted all these commands. However, upon flashing the boot.img the phone immediately boots (and gets stuck).
So I re-entered fastboot again to finish the job. Everything else went fine.
But the problem persists: When booting, the phone now displays the "Warning: Bootloader unlocked" message for a long time, with a kind of water ripple effect from bottom to top, repeating.
When I switch it off, it switches back on automatically, trying to boot and getting stuck at this screen. Sometimes I get to the droid lying on its back with a red !-Triangle on top. Poor little bugger. Soft bricked.
What can I do to fix this?
I can still enter fastboot.
I assume that yet again I grabbed the wrong ROM.
Is this supposed to be dead? http://sbf.droid-developers.org/phone.php?device=14
I think you might be on lollipop bootloader as you are having a screen flickering issue & downgrading the boatloader might be dangerous.
I'm don't know whether it will solve your problem but try flashing a lollipop firmware.
I'm not allowed to post links. Google for XT 1032 lollipop firmware. I saw one in groupandroid website.
Download the firmware from the site & execute the given commands.
legolas06 said:
I think you might be on lollipop bootloader as you are having a screen flickering issue & downgrading the boatloader might be dangerous.
I'm don't know whether it will solve your problem but try flashing a lollipop firmware.
I'm not allowed to post links. Google for XT 1032 lollipop firmware. I saw one in groupandroid website.
Download the firmware from the site & execute the given commands.
Click to expand...
Click to collapse
Thank you. I got that file.
"adb devices" won't find my phone, though.
"Fastboot devices" does. So I can't use "adb push ..." to move the ROM to the phone.
Also, whatever option I chose from the Fastboot Flash Mode, the phone starts to boot. So I can not "enter" Recovery.
Should I just use "fastboot update rom.zip"? I don't wan't to miss my last chance to revive this phone.
ADB commands will not work in with the phone fastboot mode.
Since fastboot commands do work, you can manually flash each partition from the stock ROM. Entering recovery isn't required to do this.
fertchen said:
Thank you. I got that file.
"adb devices" won't find my phone, though.
"Fastboot devices" does. So I can't use "adb push ..." to move the ROM to the phone.
Also, whatever option I chose from the Fastboot Flash Mode, the phone starts to boot. So I can not "enter" Recovery.
Should I just use "fastboot update rom.zip"? I don't wan't to miss my last chance to revive this phone.
Click to expand...
Click to collapse
I had similar problems & this method worked for me everytime. Sorry I'm a new user & I cannot post the links.
You can search the forum & find the links.
I found a thread in "xda -> moto g general->[FIRMWARE][XT1032-XT1033] Firmware Lollipop Retail Brasil & Asia 5.0.2" by cristiand391. Download the firmware for your device. It will be in BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip. Extract the contents to the fastboot.exe folder where you use regularly. Run the commands in fastbootmode. Please be careful with the commands.
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Reboot.
audit13 said:
ADB commands will not work in with the phone fastboot mode.
Since fastboot commands do work, you can manually flash each partition from the stock ROM. Entering recovery isn't required to do this.
Click to expand...
Click to collapse
The problem here is that the phone will boot as soon as I flash the boot.img and the whole thing fails.
Do you see a way out of this situation?
Any way to do this with a .zip ROM?
Have you tried flashing different firmware such as the GPE for your phone?
Does boot.img flash properly? If it does, you could try installing TWRP, boot into TWRP, mount the data partition, and use your computer to copy a custom ROM to the phone fpr flashing.
@Fretchen
That might be because you are on lollipop bootloader & you are trying to flash kitkat bootloader?But I may be wrong. Previously you told that you tried restoring to kitkat & that boot.img is kitkat bootloader. Try with this lollipop firmware.
audit13 said:
Have you tried flashing different firmware such as the GPE for your phone?
Does boot.img flash properly? If it does, you could try installing TWRP, boot into TWRP, mount the data partition, and use your computer to copy a custom ROM to the phone fpr flashing.
Click to expand...
Click to collapse
I now did exactly what legolas06 wrote, using "MoeMoe_BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml"
There were "hab check fails" for recovery and boot but at least the device did not reboot upon flashing the boot.img.
I rebooted it and it is going further than ever before, all the Motorola animations were played but in the end the phone got stuck at the circular blue pool (water) with the bit Motorola 'M' plus the concentric water ripple effect.
I switched it off and on again and then it played through the animations, then updated the apps (total number: 9) and then started the system. Apparently it is working.
Thank you very much, I really appreciate your support.
Allow me thse final questions:
Can I from now on just apply OTA updates?
If not, what can I change to make this possible?
Is it advisable to install a EU Rom soon for whatever reason?
fertchen said:
I now did exactly what legolas06 wrote, using "MoeMoe_BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml"
There were "hab check fails" for recovery and boot but at least the device did not reboot upon flashing the boot.img.
I rebooted it and it is going further than ever before, all the Motorola animations were played but in the end the phone got stuck at the circular blue pool (water) with the bit Motorola 'M' plus the concentric water ripple effect.
I switched it off and on again and then it played through the animations, then updated the apps (total number: 9) and then started the system. Apparently it is working.
Thank you very much, I really appreciate your support.
Allow me thse final questions:
Can I from now on just apply OTA updates?
If not, what can I change to make this possible?
Is it advisable to install a EU Rom soon for whatever reason?
Click to expand...
Click to collapse
Happy that I could help.
You flashed the stock firmware so everything should work again. OTA updates if available would work.
fertchen said:
Allow me thse final questions:
Can I from now on just apply OTA updates?
If not, what can I change to make this possible?
Is it advisable to install a EU Rom soon for whatever reason?
Click to expand...
Click to collapse
I don't know if you can apply OTA updates. Before the OTA update will work, you may need to update all Motorol apps via Play store.
You could wait until a fulkl stock lollipop pop is released for your phone and flash it using fastboot.
You can try different ROMs but stick to the ROMs made for your model. I have an xt1032 and I have installed US Retail, stock Telus, and GPE.
worked for me too, thank you soo much. give this solution a try
legolas06 said:
I had similar problems & this method worked for me everytime. Sorry I'm a new user & I cannot post the links.
You can search the forum & find the links.
I found a thread in "xda -> moto g general->[FIRMWARE][XT1032-XT1033] Firmware Lollipop Retail Brasil & Asia 5.0.2" by cristiand391. Download the firmware for your device. It will be in BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml.zip. Extract the contents to the fastboot.exe folder where you use regularly. Run the commands in fastbootmode. Please be careful with the commands.
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Reboot.
Click to expand...
Click to collapse
these steps look soo similar that the ones you can find in other blogs/discussions, but for me, in my case the main difference was the firmware, I tried with a loot of them, but the one that is mentioned in this post, installed smoothly, and with no issues, thank you so much, to post your experience and this solution.
My Best Regards,
Esteban
I was having some connectivity loss earlier, so I powered off, turned back on and on turning back on, I now get the initial splash screen and nothing further. Can boot into the boot menu and recovery. Tried wiping cache first, then factory reset. Neither option changed anything. Any suggestions?
Were you using stock ROM?
Provide more information as to which ROM you were using.
akiratoriyama said:
Were you using stock ROM?
Provide more information as to which ROM you were using.
Click to expand...
Click to collapse
I apologize, this is completely stock. I left it on overnight (plugged in) and apparently the battery wouldn't charge in this state as it was dead this morning. Plugged it in and charged for a bit and then tried turning it on and it is doing the same thing as before - hanging up at the initial splash screen.
I am helping hipsterdoofus with his phone. I work in the same office.
The only thing I can do is get it into fastboot mode. I was able to get the drivers working in my PC.
When I run fastboot devices, it's showing the moto g.
The bootloader isn't unlocked. I tried to do a "fastboot boot recovery.img" to get it to temp boot into twrp, but it fails since the bootloader is locked.
Is it possible to unlock the bootloader from this state from the fastboot menu?
I assume we can't flash twrp from fastboot without the bootloader being unlocked.
I come from using a Nexus 5, so this device is quite a bit different than what I'm used to. Sorry if I'm asking stupid questions.
Just wanted to do an update.
I was able to unlock the bootloader, then I downloaded the GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip file from a link I found on the forum.
I followed the steps for restoring stock firmware in this thread.
I did the section for flashing from the xml.zip file:
Code:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
If you get "(bootloader) Preflash validation failed" errors on the first two entries, you should be okay to ignore (something I read on another thread here).
After that, the phone rebooted. We weren't sure if it was ever going to finish booting up. It had the boot animation screen for quite some time before it finally loaded the OS.
So the good news is, the phone is booting up, and it's the GPE edition.
Bad news is, it's not detecting the SIM card.
If anyone has any ideas, I would love to hear them.
SoonerDude said:
So the good news is, the phone is booting up, and it's the GPE edition.
Bad news is, it's not detecting the SIM card.
If anyone has any ideas, I would love to hear them.
Click to expand...
Click to collapse
Maybe trying to reflash corresponding radio firmware ?
http://forum.xda-developers.com/showthread.php?t=2649763
i received an OTA update on friday, i installed it and after it was completed it restarted and now just shows the bootup screen and restarts over and over. i could access recovery but nothing helped eg clearing catche etc so i downloaded Retail Europe (1GB) - XT1541_OSPREY_RETEU_6.0_MPI24.65-33.1_cid7 and followed theses steps
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
every step says it passed ok but when it restarts its still stuck on boot loop the only difference now is if i try to enter recovery it just restarts and again just keeps rebooting.
ive got an aftermarket screen dont know if that makes a difference as ive read apple are bricking phones that havnt been repaired by them selves.
please help im stuck for ideas now
also my bootlocker is locked and cant be unlocked.
just noticed that even though it all pass`s ok my software is staying the same and not updating, ive tried it at least 20 times and on different machines. also tried rsd lite and that also says completed but no change in software
the sotfware listed in the bootloader is, m8919_2020613.22.03.21.29r osprey_emea
and the one im tryig to update to is, m8916_2020629.41.03.21.51r osprey-reteu
bower123456 said:
also my bootlocker is locked and cant be unlocked.
just noticed that even though it all pass`s ok my software is staying the same and not updating, ive tried it at least 20 times and on different machines. also tried rsd lite and that also says completed but no change in software
the sotfware listed in the bootloader is, m8919_2020613.22.03.21.29r osprey_emea
and the one im tryig to update to is, m8916_2020629.41.03.21.51r osprey-reteu
Click to expand...
Click to collapse
Same problem with my Moto 2015 after OTA update, i tryed everything and nothing... =/ boot locked, stock recovery. My baseband M8919_2020613.22.03.21.29R osprey_emea
Tomorrow i will send my moto for Motorola.
wish i could but ive got a replacement screen so they wont touch it so looks like bin for mine
Nothing to do pretty much, same happened to me and there's no fix for that
I think the problem it's the Stock ROM we try flash, because the software version it's different.
I try flash with this ROM [XT1541_OSPREY_RETEU_6.0_MPI24.65-33.1_cid7_subsidy-DEFAULT_CFC__v2.xml], and i could flashing all files without errors, but still looping on motorola logo.
<software_version version="osprey_reteu-user 6.0 MPI24.65-33.1 1 release-keysM8916_2020629.41.03.21.51R"/>
M8919_2020613.22.03.21.29R osprey_emea - Original
if you manage to sort it please let me know