Hi there
I use Cromi.X 5.4 and that 11with TWRP 2.8.0.1 (big thanks to them) on bootloader 10.6.1.14.10 and i have E:inotify_t modified item not found in log of backup.
I dont know what exactly it want to mean, it is refering to linux kernel.
Thanks to all who contribute to tf700 developement.
edit: log attached with error..
Related
Hello, I'm using T-Mobile (UK) HTC One SV with JB (rooted)
I follows this link to root my phone and thus I've got the JB CWM version listed in the link.
The problem is when I boot into recovery mode into the CWM, the screen is shifted a bit to left and the cropped/shifted part is appearing on the right! (I hope I'm making some sense with this 'shifted screen' explanation. I'd like to post a screenshot if someone can help me with getting a screenshot in recoverymode) Anybody else facing this problem? If yes, how can I fix it?
On a slightly different note, I'd like to admit that whilst following the rooting procedure mentioned above, I tried to be a 'smart arse' and tried flashing CWM 6.0.3.8 on the device, which just wouldn't load /data with error
Code:
Can't mount /data
and same with cache and respective logs. And because of that I wasn't able to do a backup either. I tried, quite a few times, to format the SD card into FAT32 etc but it was having none of it! :crying:. Then when I slapped myself for not following the procedure, like a good boy , and got the same CWM listed in the link, I was able to do backup and no errors were being displayed in regards to mounting of /data. :good: I thought I'd share my experience on for others to learn from.
This screen flickering is a know problem of this touch recovery.
Its not developed to the end.
I recommend you to use TWRP recovery which is fully functional.
old.splatterhand said:
This screen flickering is a know problem of this touch recovery.
Its not developed to the end.
I recommend you to use TWRP recovery which is fully functional.
Click to expand...
Click to collapse
Thanks for quick reply. I've never used TWRP and to be honest, quite new to this depth of rooting, recovery etc. Does TWRP offer similar set of features as CWM? And is there a 'touch' TWRP for this device on JB? If so, could you kindly post me the link.
Most up to date version you will find here:
[TWRP 2.6] Updated 9/21/13 All variants TWRP recovery 2.6
Another (older):
[Recovery] TWRP Recovery 2.x
Yes, all touch and has more features than cwm.
old.splatterhand said:
Most up to date version you will find here:
[TWRP 2.6] Updated 9/21/13 All variants TWRP recovery 2.6
Another (older):
[Recovery] TWRP Recovery 2.x
Yes, all touch and has more features than cwm.
Click to expand...
Click to collapse
Thanks a lot! I shall give it a try
Greetings. Today I wanted to try a KitKat rom on my TF300T (currently on PacMan Rom 4.3), but as I've figured out, I needed a new version of recovery, since I was using TWRP 2.4.4.0.
So I flashed it (version for 4.2 Bootloader, of course), but even though I've tried nearly all versions higher than 2.4.4.0 (for ex. 2.5.0.0 or 2.6.1.0), I was still getting this weird screen (not my picture, but the same problem) and the only way, how to solve it, is to go back on my default TWRP version - 2.4.4.0.
Any help is much appreciated!
spenat said:
Greetings. Today I wanted to try a KitKat rom on my TF300T (currently on PacMan Rom 4.3), but as I've figured out, I needed a new version of recovery, since I was using TWRP 2.4.4.0.
So I flashed it (version for 4.2 Bootloader, of course), but even though I've tried nearly all versions higher than 2.4.4.0 (for ex. 2.5.0.0 or 2.6.1.0), I was still getting this weird screen (not my picture, but the same problem) and the only way, how to solve it, is to go back on my default TWRP version - 2.4.4.0.
Any help is much appreciated!
Click to expand...
Click to collapse
Which stock rom were you on, 10.x.x.x.x.x?
Hello and thanks for quick reply! My stock rom was 10.6.1.8.
Anyway, some really weird thing happened - I downloaded TWRP 2.6.1.0 (again, version 4.2BL), flashed it, went to recovery but whoa - It installed CWM 6.0.4.5...? How is that even possible? And yes, the blob was downloaded from the official TWRP site.
Anyway, with this new "TWRP" (aka. CWM ) I was able to install this KitKat rom, but still I would like to know the solution for the TWRP problem.
But still, truth is, that my stock rom is very old, going to update it then - Thanks!
EDIT: Ah, now I see it, my bad Just found this:
If current bootloader = 10.6.1.8 - JB 4.2 - recovery to flash = ONLY TWRP "openrecovery-twrp-2.4.4.0-tf300t-4.2.blob" - flashing a non-4.2 version of TWRP or any version of CWM will brick device. Also flashing 2.5.0.0-tf300t-4.2 on the 10.6.1.8 bootloader results in a split-screen issue.
Click to expand...
Click to collapse
Yes, update to 10.6.1.27 to use the TWRP.
Sent from my TF300T using xda app-developers app
At this point I've tried to install both
[ROM][CM11][4.4.2][KitKang][KANG] TF300T nightly builds and
[ROM][4.4.2][OFFICIAL] CM-11.0 for tf300t on TWRP 2.5.0.0 (I'm coming from Cromi-X 5.2.3), but received the following error: error executing updater binary in zip.
Then I tried to install TWRP 2.6.3.0 (for 4.2 bootloader) but received the same error.
Then I tried to install CWM 6.0.2.3 but it couldn't see any storage at all.
Do you know how I can install any of the new 4.4.2 roms?
Thanks in advance
---
David
You're right! too much risk of brick ... there is a simple and effective guide ... I keep the stock version
Inviato dal mio ASUS Transformer Pad TF300T utilizzando Tapatalk
Nobody knows which recovery I should use?
You need the special KitKat recovery to install a 4.4.2 ROM. Look in the first post of the OmniRom thread or the seventh post of the Official CM thread for that recovery. You need to be on the latest JB booloader: 10.6.1.15 and above.
Sent from my TF300T using xda app-developers app
I flashed the recovery which is in the first post of the Official CM thread and that one works fine. You can follow the instructions which are in post #7 and make sure you restart into your current android OS. Otherwise you probably won't see internal or external SD in recovery mode.
eddyfr said:
I flashed the recovery which is in the first post of the Official CM thread and that one works fine. You can follow the instructions which are in post #7 and make sure you restart into your current android OS. Otherwise you probably won't see internal or external SD in recovery mode.
Click to expand...
Click to collapse
Yes, that is the compatible KitKat CWM. There is also a compatible KitKat TWRP.
Hi Guys,
Urgent issue. I rooted the device using Kingo, installed TWRP and then transferred the zip for the CM11 nightly and the gapps. I confirmed the nightly was for the D801 model which is T-mobile and the version of the G2 I have. Like a fool I forgot to backup my previous rom and TWRP says:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/cm-11-20140208-NIGHTLY-d801.zip'
Error flashing zip '/sdcard/cm-11-20140208-NIGHTLY-d801.zip'
Updating partition details
And there's a red ominous 'Failed' at the bottom of the prompt. Please help, I have no idea what to do, I'm a noob at this. Help is greatly appreciated, thank you!
Regards
mysticgohan_92 said:
Hi Guys,
Urgent issue. I rooted the device using Kingo, installed TWRP and then transferred the zip for the CM11 nightly and the gapps. I confirmed the nightly was for the D801 model which is T-mobile and the version of the G2 I have. Like a fool I forgot to backup my previous rom and TWRP says:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/cm-11-20140208-NIGHTLY-d801.zip'
Error flashing zip '/sdcard/cm-11-20140208-NIGHTLY-d801.zip'
Updating partition details
And there's a red ominous 'Failed' at the bottom of the prompt. Please help, I have no idea what to do, I'm a noob at this. Help is greatly appreciated, thank you!
Regards
Click to expand...
Click to collapse
Can you restore the phone and boot back up? If so, replace TWRP with Philz Touch CWM. I had trouble flashing kit kat rom with TWRP too. But Philz Touch recovery seems to works just fine and it also has the option with restore a backup from TWRP too.
super114 said:
Can you restore the phone and boot back up? If so, replace TWRP with Philz Touch CWM. I had trouble flashing kit kat rom with TWRP too. But Philz Touch recovery seems to works just fine and it also has the option with restore a backup from TWRP too.
Click to expand...
Click to collapse
Hi, thanks for your reply. I have resolved all issues. Turns out you need TWRP 2.6.3.5 to flash any CM11 nightlies. Also was using Windows 8.1 so the adb drivers were not straightforward to install to use adb push. I pushed and installed TWRP 2.6.3.5 and then flashed CM11 and she works like a dream!
Hi guys,
I want to ask you some questions,I never flashed my tab.
1. Is it this TWRP file I have to flash ? http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.6.3.0-tf300t-4.2.blob (I'm on stock official Asus 4.2.1 now)
2. If I go on CM11 for example, can I revert to stock Asus 4.2.1 ?
3. If I go on CM11, can I flash on it a CM 10.2 rom for example ?
And does the keyboard work on custom rom like CM11?
Thank you for your help
needhelp11 said:
1. Is it this TWRP file I have to flash ? http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.6.3.0-tf300t-4.2.blob (I'm on stock official Asus 4.2.1 now)
2. If I go on CM11 for example, can I revert to stock Asus 4.2.1 ?
3. If I go on CM11, can I flash on it a CM 10.2 rom for example ?
And does the keyboard work on custom rom like CM11?
Click to expand...
Click to collapse
1. That recovery will not work for KitKat ROMs like CM 11 or OmniROM. Check the respective ROM thread for a working TWRP. Also double-check the version of your bootloader.
2. Yes, read the sticky guides in the general section.
3. Yes.
When flashing a different ROM (not just another version of the same ROM) remember to do a full wipe: data, system, cache, dalvik.
If you mean the keyboard dock, yes that basically works in all ROMs I tried so far. Some ROMs don't support all the special keys, but basic typing works fine.
Sent from my TF300T using Tapatalk
Hi,
Thank you for your answer. I have read a lot of guide, but I'm a bit confusing because I never used TWRP before and there is so much things to do ( adb, fastboot etc...)
Im on the lastest Asus official firmware so I think I need the TWRP 2.6.3.0 or .2 4.2 version. Should I do this before : http://forum.xda-developers.com/showthread.php?t=2545610? (install nvflash flatline )
Edit : And if I flash cm 10.2 stable, can I use TWRP 2.6.3.0 ?
Again thank you
needhelp11 said:
Hi,
Thank you for your answer. I have read a lot of guide, but I'm a bit confusing because I never used TWRP before and there is so much things to do ( adb, fastboot etc...)
Im on the lastest Asus official firmware so I think I need the TWRP 2.6.3.0 or .2 4.2 version. Should I do this before : http://forum.xda-developers.com/showthread.php?t=2545610? (install nvflash flatline )
Edit : And if I flash cm 10.2 stable, can I use TWRP 2.6.3.0 ?
Again thank you
Click to expand...
Click to collapse
Flatline is the best thing you can do for your 300... I would highly recommend backing up of your nvflash blobs.....
If you need any help with this just let me know, drop me a line at [email protected]
Thx as always Josh
Thank you. I will do it a little later, im now busy with my work.
Thanks again to you guys for helping me
needhelp11 said:
Edit : And if I flash cm 10.2 stable, can I use TWRP 2.6.3.0 ?
Click to expand...
Click to collapse
Yes, that is fine.
The latest version from scanno (2.7.0.0) should work for both CM 11 and CM 10.2, but I am not sure the respective patch made it into that build, maybe only with the next update.
2.6.3.0-42 from the official download site is the safe choice for CM 10.2.
Sent from my TF300T using Tapatalk