Hey guys could definitely use some help.
I've been having a lot of errors while flashing anything on my phone.
Setup: CR JL Beta 1 w/ ElementalX-5.0-vanilla
hboot: 1.09 S-On
TWRP: 2.4.3.0
Radio: 3.17
I have wiped Cache --> Davlik --> System --> Factory Reset --> SD Card
Mounted SD through TWRP and loaded CR 6 (download via phone & computer)
While flashing I get the following message:
E:Error in /sdcard/CleanROM 6.zip
(Status 1)
Error flashing zip '/sdcard/CleanROM 6.zip'
Updating partition details...
I have tried reinstalling TWRP, downloading the CR 6 zip multiple times....I don't know what else to do. Any advice?
happilyaccosted said:
Hey guys could definitely use some help.
I've been having a lot of errors while flashing anything on my phone.
Setup: CR JL Beta 1 w/ ElementalX-5.0-vanilla
hboot: 1.09 S-On
TWRP: 2.4.3.0
Radio: 3.17
I have wiped Cache --> Davlik --> System --> Factory Reset --> SD Card
Mounted SD through TWRP and loaded CR 6 (download via phone & computer)
While flashing I get the following message:
E:Error in /sdcard/CleanROM 6.zip
(Status 1)
Error flashing zip '/sdcard/CleanROM 6.zip'
Updating partition details...
I have tried reinstalling TWRP, downloading the CR 6 zip multiple times....I don't know what else to do. Any advice?
Click to expand...
Click to collapse
Some members are having trouble installing CR 6 on TWRP 2.4.3.0, you might reflash twrp to 2.4.2.0 worked for me
ronnie498 said:
Some members are having trouble installing CR 6 on TWRP 2.4.3.0, you might reflash twrp to 2.4.2.0 worked for me
Click to expand...
Click to collapse
I thought that might be the problem how/where do I get 2.4.2.0 on my phone. Unfortunately I deleted the file when wiping my SD card.
happilyaccosted said:
I thought that might be the problem how/where do I get 2.4.2.0 on my phone. Unfortunately I deleted the file when wiping my SD card.
Click to expand...
Click to collapse
Home of TWRP past and present
This worked perfectly, thanks for your help.
Sent from my HTC One X using xda premium
2.3.3.1 is a better choice. Have had nothing but problems with 2.4.x.x so far.
One of them doesn't nandroid backup properly, another doesn't install, another won't mount sd properly in recovery, and another has issues with Adb I think.
Everytime I have installed 2.4.x.x something was broken, and I went back to the latest 2.3.x.x and all was well.
2.3.3.1 should be considered the latest stable release for us and any 2.4.x.x considered beta.
Sent from the HOXL dimension of S-OFF
So i downloaded a nightly off the [ROM] Vanir/Commotio TF700
and i was trying to flash it on twrp it failed i made sure to wipe and factory reset prior. I put cromni back on without any problems.
It says it can't find md5 file... during the flashing process
Paprika88 said:
So i downloaded a nightly off the [ROM] Vanir/Commotio TF700
and i was trying to flash it on twrp it failed i made sure to wipe and factory reset prior. I put cromni back on without any problems.
It says it can't find md5 file... during the flashing process
Click to expand...
Click to collapse
Snag the recovery.log after the flash and it will provide more info.
here's my log
its attached
I'm trying out all the roms i can until i land one that might fix my wifi reception.
Anyways i'm also trying crombi-kk.. and I'm having trouble with this step. its asking me to fix root and then won't boot when i flash it...
(this is coming from cromi x
I can't find the root sub section after i open developer options.
1. Enable developer options by clicking the build number 7 times in settings - about tablet
2. Go to developer settings
3. In the first section click Root access and change to Apps and ADB
I'm also asked to fix permissions after I flash Commotio
Paprika88 said:
here's my log
its attached
I'm trying out all the roms i can until i land one that might fix my wifi reception.
Anyways i'm also trying crombi-kk.. and I'm having trouble with this step. its asking me to fix root and then won't boot when i flash it...
(this is coming from cromi x
I can't find the root sub section after i open developer options.
1. Enable developer options by clicking the build number 7 times in settings - about tablet
2. Go to developer settings
3. In the first section click Root access and change to Apps and ADB
I'm also asked to fix permissions after I flash Commotio
Click to expand...
Click to collapse
You need to update your TWRP version - please move to TWRP 2.7.1.1
This is why the rom is failing to flash:
Code:
ApplyParsedPerms: removexattr of /system/addon.d/50-vanir.sh to 0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
It's either a bug in the installer or related to the older TWRP - I suspect the latter.
Thanks!
I installed twrp 7.2.1.1 and it flashed successfully. however now i rebooted it and I see commotion with a picture of the ocean and sunset looping.
the booting screen i presume. I figured it was just loading everything up but it's been like this for 20 minutes now...
i'll try crombi kitkat
Edit: K nevermind I flashed the gapps and it worked
It loaded and I received a warning message:
UIDS on the system are inconsistent you need to wipe your data partition or your device will be unstable... with a i'm feeling lucky button.
I'll try factory wipe
it worked
Paprika88 said:
Thanks!
I installed twrp 7.2.1.1 and it flashed successfully. however now i rebooted it and I see commotion with a picture of the ocean and sunset looping.
the booting screen i presume. I figured it was just loading everything up but it's been like this for 20 minutes now...
i'll try crombi kitkat
Edit: K nevermind I flashed the gapps and it worked
It loaded and I received a warning message:
UIDS on the system are inconsistent you need to wipe your data partition or your device will be unstable... with a i'm feeling lucky button.
I'll try factory wipe
it worked
Click to expand...
Click to collapse
Glad you got it working.
For future reference: Whenever you move from one rom to another you have to perform a factory wipe in recovery. Preferably before you flash the rom. Saves you a lot of headache
Ok was trying to install a ROM and got an error that there was no OS installed and now the phone wont boot up
I rooted it via Bacon root toolkit and I took a back up before I rooted but I cannot get it to reboot. The back up is saved on the PC and phone not getting picked up by PC
Anyone tried to restore android back up file and went to ab file on pc but it wont load. Can go into fastboot and recovery but not showing on PC
HELP
Delete duplicate post
This is why you shouldn't use toolkits, you have no access to fastboot and no idea how to fix it. What drivers are installed on your PC? I guess it doesn't matter, my advice is to completely delete anything that the toolkit installed and start fresh. Go to my guide thread here:
http://forum.xda-developers.com/showthread.php?t=2839471
I have links to the Android SDK (which contains adb/fastboot) and the right drivers for this phone. Make sure you reboot your PC after deleting everything, then install the SDK and the drivers, reboot PC again, connect phone.
Transmitted via Bacon
timmaaa said:
This is why you shouldn't use toolkits, you have no access to fastboot and no idea how to fix it. What drivers are installed on your PC? I guess it doesn't matter, my advice is to completely delete anything that the toolkit installed and start fresh. Go to my guide thread here:
http://forum.xda-developers.com/showthread.php?t=2839471
I have links to the Android SDK (which contains adb/fastboot) and the right drivers for this phone. Make sure you reboot your PC after deleting everything, then install the SDK and the drivers, reboot PC again, connect phone.
Transmitted via Bacon
Click to expand...
Click to collapse
Live and Learn and got back to the stock using adb/fastboot and installing images and back to normal again. I want to update to Lollilop and Sabermod but after trying may just stick with Stock for a while as I kept getting errors when trying to load the ROM??
Thanks
funkyirishman said:
Live and Learn and got back to the stock using adb/fastboot and installing images and back to normal again. I want to update to Lollilop and Sabermod but after trying may just stick with Stock for a while as I kept getting errors when trying to load the ROM??
Thanks
Click to expand...
Click to collapse
Exactly what error are you getting when trying to flash? Are you checking the md5 when you download? What recovery are you using?
Transmitted via Bacon
timmaaa said:
Exactly what error are you getting when trying to flash? Are you checking the md5 when you download? What recovery are you using?
Transmitted via Bacon
Click to expand...
Click to collapse
When I tried to flash initially I got the below
Went into recovery and did Factory reset and then wipe cache partition. Then tried Apply update and scrolled to the ROM file and apply update and I get the below error
Install Failed
Finding Update Package
Opening Update Package
Verifying Update Package
E: Failed to verify whole-file signature
E:signature verification failed
Installation aborted
I have the files saved in the download folder.
Then when I tried to install with TWRP rather than update I clear cache, dalvik and system and tried to load and got the below error
Checking for MD5 File
Skipping MD5 Chekck: no MD5 file found
Comparing TZ Verionsioj TZ. BF.2.0-2.0.0109 to TZ
BF 2.0-2.0.0096
assert failed oppo verify trustzone
I got the message that no os installed and I could not reboot so I flashed it back to stock using the below
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Phone now rooted and unlocked and like to update but afraid I will just experience it all over again:crying:
Any help appreciated
Thanks
funkyirishman said:
When I tried to flash initially I got the below
Went into recovery and did Factory reset and then wipe cache partition. Then tried Apply update and scrolled to the ROM file and apply update and I get the below error
Install Failed
Finding Update Package
Opening Update Package
Verifying Update Package
E: Failed to verify whole-file signature
E:signature verification failed
Installation aborted
Click to expand...
Click to collapse
Ok, you got this error because you're trying to flash a custom ROM with the stock recovery. The stock recovery can only flash zips signed by CM (official updates)
funkyirishman said:
Then when I tried to install with TWRP rather than update I clear cache, dalvik and system and tried to load and got the below error
Checking for MD5 File
Skipping MD5 Chekck: no MD5 file found
Comparing TZ Verionsioj TZ. BF.2.0-2.0.0109 to TZ
BF 2.0-2.0.0096
assert failed oppo verify trustzone
I got the message that no os installed and I could not reboot so I flashed it back to stock using the below
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Phone now rooted and unlocked and like to update but afraid I will just experience it all over again:crying:
Any help appreciated
Thanks
Click to expand...
Click to collapse
Your problem here is that you're trying to install a ROM but you don't have the correct firmware installed. When flashing a Lollipop ROM for the first time you need to first flash Lollipop firmware and Lollipop modem. Once you've flashed those they're always there so you don't need to do it again. The only reason you'd need to flash firmware and modem again would be if you wanted to return to a KitKat ROM, and then it'd be KitKat firmware and modem that you'd need to flash. Anyway, you'll find the modems here:
http://boeffla.df-kunde.de/bacon/modems
And I mirror the firmwares here:
https://drive.google.com/folder/d/0B98G0KTJwnBFRGhZeUNpMEI4ajg/edit
PS. I also noticed you weren't wiping properly before attempting to install the ROM. When flashing a ROM you need to perform a full wipe, this includes system, data, cache, and dalvik cache. This didn't cause the problem you experienced, but had the install succeeded you would have had other problems.
It might benefit you to read the OnePlus One FAQ thread:
http://forum.xda-developers.com/oneplus-one/help/faq-oneplus-one-frequently-questions-t2895136
And my guide thread:
http://forum.xda-developers.com/showthread.php?t=2839471
Transmitted via Bacon
timmaaa said:
Ok, you got this error because you're trying to flash a custom ROM with the stock recovery. The stock recovery can only flash zips signed by CM (official updates)
Your problem here is that you're trying to install a ROM but you don't have the correct firmware installed. When flashing a Lollipop ROM for the first time you need to first flash Lollipop firmware and Lollipop modem. Once you've flashed those they're always there so you don't need to do it again. The only reason you'd need to flash firmware and modem again would be if you wanted to return to a KitKat ROM, and then it'd be KitKat firmware and modem that you'd need to flash. Anyway, you'll find the modems here:
http://boeffla.df-kunde.de/bacon/modems
And I mirror the firmwares here:
https://drive.google.com/folder/d/0B98G0KTJwnBFRGhZeUNpMEI4ajg/edit
PS. I also noticed you weren't wiping properly before attempting to install the ROM. When flashing a ROM you need to perform a full wipe, this includes system, data, cache, and dalvik cache. This didn't cause the problem you experienced, but had the install succeeded you would have had other problems.
It might benefit you to read the OnePlus One FAQ thread:
http://forum.xda-developers.com/oneplus-one/help/faq-oneplus-one-frequently-questions-t2895136
And my guide thread:
http://forum.xda-developers.com/showthread.php?t=2839471
Transmitted via Bacon
Click to expand...
Click to collapse
Cheers thanks for that. I thought the ROM updated the firmware and modems so that's a lesson learned
So I download the modem and firmware and copy these into the download folder on the phone and install via TWRP recovery correct? Modem first then firmware? This will then put lollipop on the phone correct?
Then if I want to install a new ROM I need to do a full wipe. I just did not see that option and was just following the video tutorial associated with the Sabermod thread by wiping cache system and dalvik
Read your thread and will be doing a full nandroid & EFS back up prior to do any of the above
Thanks again
funkyirishman said:
Cheers thanks for that. I thought the ROM updated the firmware and modems so that's a lesson learned
Click to expand...
Click to collapse
CM12 does do that, but no other ROMs do.
funkyirishman said:
So I download the modem and firmware and copy these into the download folder on the phone and install via TWRP recovery correct? Modem first then firmware? This will then put lollipop on the phone correct?
Click to expand...
Click to collapse
Yes, install via TWRP recovery. It doesn't matter which order you flash them in. So install both, then go to the reboot menu, and select to reboot back to the recovery. This doesn't install Lollipop as such, this installs Lollipop compatible firmware.
funkyirishman said:
Then if I want to install a new ROM I need to do a full wipe. I just did not see that option and was just following the video tutorial associated with the Sabermod thread by wiping cache system and dalvik
Click to expand...
Click to collapse
Go to the wipe menu in TWRP, then select advanced wipe, from there you can choose which partitions you want to wipe (system, data, cache, dalvik cache), just don't wipe internal storage (that's your virtual sd card).
funkyirishman said:
Read your thread and will be doing a full nandroid & EFS back up prior to do any of the above
Thanks again
Click to expand...
Click to collapse
Very good, that's super important. It doesn't happen often, but sometimes the EFS partition will just randomly become corrupt, if you don't have a backup in that situation your phone is useless (you can't use someone else's EFS backup because it contains unique device identifiers).
Transmitted via Bacon
timmaaa said:
CM12 does do that, but no other ROMs do.
Yes, install via TWRP recovery. It doesn't matter which order you flash them in. So install both, then go to the reboot menu, and select to reboot back to the recovery. This doesn't install Lollipop as such, this installs Lollipop compatible firmware.
Go to the wipe menu in TWRP, then select advanced wipe, from there you can choose which partitions you want to wipe (system, data, cache, dalvik cache), just don't wipe internal storage (that's your virtual sd card).
Very good, that's super important. It doesn't happen often, but sometimes the EFS partition will just randomly become corrupt, if you don't have a backup in that situation your phone is useless (you can't use someone else's EFS backup because it contains unique device identifiers).
Transmitted via Bacon
Click to expand...
Click to collapse
Reading about back ups etc on the below when creating a recovery
-Make sure you check the md5 to verify its integrity.
How and what do you check?
Also I first do the back up. Then install the firmware and modems and then update the ROM.
I dont need to flash the stock kernal or fastboot images, correct?
Also doing a back up does it back it up to an internal SD Card or should I keep it on PC
Cheers
funkyirishman said:
Reading about back ups etc on the below when creating a recovery
-Make sure you check the md5 to verify its integrity.
How and what do you check?
Also I first do the back up. Then install the firmware and modems and then update the ROM.
I dont need to flash the stock kernal or fastboot images, correct?
Also doing a back up does it back it up to an internal SD Card or should I keep it on PC
Cheers
Click to expand...
Click to collapse
The download page for a ROM or kernel usually lists the md5 checksum for that particular file. An md5 is like a digital fingerprint of the file, so once you've downloaded it you use an md5 checking app/program to confirm that the md5 of the downloaded file matches the md5 listed on the download page. This confirms that the file hasn't become corrupt during the download, if even a single byte of information is corrupt in a file the md5 will be drastically different.
You don't need to flash the stock kernel or stock images, the numbered parts in my guide aren't steps, they're sections.
When you create your nandroid backup using TWRP it will automatically be saved to your internal storage. You should keep at least one backup on your phone at all times, think of it as an insurance policy just in case something goes wrong, you'l always have a known working OS there to save you. You should also copy it to your PC for safe keeping.
timmaaa said:
The download page for a ROM or kernel usually lists the md5 checksum for that particular file. An md5 is like a digital fingerprint of the file, so once you've downloaded it you use an md5 checking app/program to confirm that the md5 of the downloaded file matches the md5 listed on the download page. This confirms that the file hasn't become corrupt during the download, if even a single byte of information is corrupt in a file the md5 will be drastically different.
You don't need to flash the stock kernel or stock images, the numbered parts in my guide aren't steps, they're sections.
When you create your nandroid backup using TWRP it will automatically be saved to your internal storage. You should keep at least one backup on your phone at all times, think of it as an insurance policy just in case something goes wrong, you'l always have a known working OS there to save you. You should also copy it to your PC for safe keeping.
Click to expand...
Click to collapse
Perfect I will google an md5 checking app/program so for the Sabermod I need to check on the download page on their link below
http://forum.xda-developers.com/oneplus-one/development/rom-kernel-sabermod-cm-11-0-t2880407
Just checked their download link is not working but I downloaded the ROM to my PC previously and its in zip format can you check the MD5 v this?
Thanks
funkyirishman said:
Perfect I will google an md5 checking app/program so for the Sabermod I need to check on the download page on their link below
http://forum.xda-developers.com/oneplus-one/development/rom-kernel-sabermod-cm-11-0-t2880407
Just checked their download link is not working but I downloaded the ROM to my PC previously and its in zip format can you check the MD5 v this?
Thanks
Click to expand...
Click to collapse
You have nothing to check it against though.
Transmitted via Bacon
timmaaa said:
You have nothing to check it against though.
Transmitted via Bacon
Click to expand...
Click to collapse
Ok so the ROM I downloaded is called cm-12-20150324-ROBBIEL811-UBER4.8-bacon and is in zip format and the download link on the developers page is dead so I cannot check the md5 file?
Thanks
funkyirishman said:
Ok so the ROM I downloaded is called cm-12-20150324-ROBBIEL811-UBER4.8-bacon and is in zip format and the download link on the developers page is dead so I cannot check the md5 file?
Thanks
Click to expand...
Click to collapse
Well yeah, if you can't reach the download page there's no way to see what the md5 is. Not all download pages have it anyway, they should, but not all do.
Transmitted via Bacon
Hi, so im very nooby to all of this stuff and had no idea what I was doing, but basically after flashing cyanogen on my OnePlus 2, trying to install GApps, and doing a factory reset, my device is completley blank with only twrp installed and no os. When i try to flash Oxygen on twrp i get the error "E: Error executing updater binary in zip '/sdcard/OnePlus2Oxygen_14_OTA_005-006_patch_1508211811.zip
Trying to sideload will also fail. Thanks for you help
DBAK22 said:
Hi, so im very nooby to all of this stuff and had no idea what I was doing, but basically after flashing cyanogen on my OnePlus 2, trying to install GApps, and doing a factory reset, my device is completley blank with only twrp installed and no os. When i try to flash Oxygen on twrp i get the error "E: Error executing updater binary in zip '/sdcard/OnePlus2Oxygen_14_OTA_005-006_patch_1508211811.zip
Trying to sideload will also fail. Thanks for you help
Click to expand...
Click to collapse
I think the Oxygen that you are flashing is an update and not a whole ROM. You need to either restore your stock ROM or try flashing your Cyanogenmod ROM correctly this time.
Sent from my SM-S903VL using Tapatalk
Hi,
I recently wanted to install a stock rom but for that I have to factory reset my device but I get "E: failed to mount/data" for anything I want to do.
Therefore I can't do backups, change /data file system, wipe data or flash anything.
It seems like my /data partition is corrupted but I can still access the current OS (lineage 13) and use it.
I'm using TWRP 3.1.0-0.
Any help ?
I dont think I can flash any ROM by now but I'll give it a try. I will give a feedback soon.
EDIT : I have to flash it with TWRP or use dload method?
I've already tried to flash a stock recovery but it didn't ask me to flash via the sdcard... Maybe I'm using the wrong stock recovery (BLN-L21_B130 from a xda thread) ?
I'm going to try with TWRP nethertheless.
I successfully flashed a stock Marshmallow ROM with TWRP but right after booting I cant accept terms of service..
I wiped cache, did a factory reset and got through this step. I think everything is fine now ! Thanks a lot
Hey again,
I tried to update the firmware to EMUI 5.0 using Firmware Finder but it seems like I can only download the .zip (there is no "Send to Firmware Updater" button).
Do you have any clue on how I should proceed to get to Nougat ?
Thanks again
Oops, looks like I was doing it the wrong way ! But it's fine now and the update is currently downloading
Thanks!