Database Info

[Q][SOLVED] E:/ cache not found

Please Help!!!!
I have flashed custom roms many times but now I my phone stucks on bootloader and cwm recovery says something about
"E: Cant't open /cache recovery/log" and none of the roms are working

re-flash a new rom and then do wipe data and dalvik cache

Already tried it. As i said no rom is working like kryllios 9, vivek's rom, I even tried original jpu and jp6 and I have wiped everything and even flashed roms without microsd card.

flash ddjg6 and dn flash any rom...and wipe data factory reset
if this works ....dont forget to say thanks

Same problem here, can anyone help

flash stock eclair rom of your country via odin....and then update your rom via kies.....this will replace all old files ...... now you may flash custom rom

TO solve this problem i flashed a stock rom that was not compiled as one package via odin. Thanks everyone.

Phone Stuck on 1+ Logo wont boot HELP

Ok was trying to install a ROM and got an error that there was no OS installed and now the phone wont boot up
I rooted it via Bacon root toolkit and I took a back up before I rooted but I cannot get it to reboot. The back up is saved on the PC and phone not getting picked up by PC
Anyone tried to restore android back up file and went to ab file on pc but it wont load. Can go into fastboot and recovery but not showing on PC
HELP

Delete duplicate post

This is why you shouldn't use toolkits, you have no access to fastboot and no idea how to fix it. What drivers are installed on your PC? I guess it doesn't matter, my advice is to completely delete anything that the toolkit installed and start fresh. Go to my guide thread here:
http://forum.xda-developers.com/showthread.php?t=2839471
I have links to the Android SDK (which contains adb/fastboot) and the right drivers for this phone. Make sure you reboot your PC after deleting everything, then install the SDK and the drivers, reboot PC again, connect phone.
Transmitted via Bacon

timmaaa said:
This is why you shouldn't use toolkits, you have no access to fastboot and no idea how to fix it. What drivers are installed on your PC? I guess it doesn't matter, my advice is to completely delete anything that the toolkit installed and start fresh. Go to my guide thread here:
http://forum.xda-developers.com/showthread.php?t=2839471
I have links to the Android SDK (which contains adb/fastboot) and the right drivers for this phone. Make sure you reboot your PC after deleting everything, then install the SDK and the drivers, reboot PC again, connect phone.
Transmitted via Bacon
Click to expand...
Click to collapse
Live and Learn and got back to the stock using adb/fastboot and installing images and back to normal again. I want to update to Lollilop and Sabermod but after trying may just stick with Stock for a while as I kept getting errors when trying to load the ROM??
Thanks

funkyirishman said:
Live and Learn and got back to the stock using adb/fastboot and installing images and back to normal again. I want to update to Lollilop and Sabermod but after trying may just stick with Stock for a while as I kept getting errors when trying to load the ROM??
Thanks
Click to expand...
Click to collapse
Exactly what error are you getting when trying to flash? Are you checking the md5 when you download? What recovery are you using?
Transmitted via Bacon

timmaaa said:
Exactly what error are you getting when trying to flash? Are you checking the md5 when you download? What recovery are you using?
Transmitted via Bacon
Click to expand...
Click to collapse
When I tried to flash initially I got the below
Went into recovery and did Factory reset and then wipe cache partition. Then tried Apply update and scrolled to the ROM file and apply update and I get the below error
Install Failed
Finding Update Package
Opening Update Package
Verifying Update Package
E: Failed to verify whole-file signature
E:signature verification failed
Installation aborted
I have the files saved in the download folder.
Then when I tried to install with TWRP rather than update I clear cache, dalvik and system and tried to load and got the below error
Checking for MD5 File
Skipping MD5 Chekck: no MD5 file found
Comparing TZ Verionsioj TZ. BF.2.0-2.0.0109 to TZ
BF 2.0-2.0.0096
assert failed oppo verify trustzone
I got the message that no os installed and I could not reboot so I flashed it back to stock using the below
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Phone now rooted and unlocked and like to update but afraid I will just experience it all over again:crying:
Any help appreciated
Thanks

funkyirishman said:
When I tried to flash initially I got the below
Went into recovery and did Factory reset and then wipe cache partition. Then tried Apply update and scrolled to the ROM file and apply update and I get the below error
Install Failed
Finding Update Package
Opening Update Package
Verifying Update Package
E: Failed to verify whole-file signature
E:signature verification failed
Installation aborted
Click to expand...
Click to collapse
Ok, you got this error because you're trying to flash a custom ROM with the stock recovery. The stock recovery can only flash zips signed by CM (official updates)
funkyirishman said:
Then when I tried to install with TWRP rather than update I clear cache, dalvik and system and tried to load and got the below error
Checking for MD5 File
Skipping MD5 Chekck: no MD5 file found
Comparing TZ Verionsioj TZ. BF.2.0-2.0.0109 to TZ
BF 2.0-2.0.0096
assert failed oppo verify trustzone
I got the message that no os installed and I could not reboot so I flashed it back to stock using the below
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Phone now rooted and unlocked and like to update but afraid I will just experience it all over again:crying:
Any help appreciated
Thanks
Click to expand...
Click to collapse
Your problem here is that you're trying to install a ROM but you don't have the correct firmware installed. When flashing a Lollipop ROM for the first time you need to first flash Lollipop firmware and Lollipop modem. Once you've flashed those they're always there so you don't need to do it again. The only reason you'd need to flash firmware and modem again would be if you wanted to return to a KitKat ROM, and then it'd be KitKat firmware and modem that you'd need to flash. Anyway, you'll find the modems here:
http://boeffla.df-kunde.de/bacon/modems
And I mirror the firmwares here:
https://drive.google.com/folder/d/0B98G0KTJwnBFRGhZeUNpMEI4ajg/edit
PS. I also noticed you weren't wiping properly before attempting to install the ROM. When flashing a ROM you need to perform a full wipe, this includes system, data, cache, and dalvik cache. This didn't cause the problem you experienced, but had the install succeeded you would have had other problems.
It might benefit you to read the OnePlus One FAQ thread:
http://forum.xda-developers.com/oneplus-one/help/faq-oneplus-one-frequently-questions-t2895136
And my guide thread:
http://forum.xda-developers.com/showthread.php?t=2839471
Transmitted via Bacon

timmaaa said:
Ok, you got this error because you're trying to flash a custom ROM with the stock recovery. The stock recovery can only flash zips signed by CM (official updates)
Your problem here is that you're trying to install a ROM but you don't have the correct firmware installed. When flashing a Lollipop ROM for the first time you need to first flash Lollipop firmware and Lollipop modem. Once you've flashed those they're always there so you don't need to do it again. The only reason you'd need to flash firmware and modem again would be if you wanted to return to a KitKat ROM, and then it'd be KitKat firmware and modem that you'd need to flash. Anyway, you'll find the modems here:
http://boeffla.df-kunde.de/bacon/modems
And I mirror the firmwares here:
https://drive.google.com/folder/d/0B98G0KTJwnBFRGhZeUNpMEI4ajg/edit
PS. I also noticed you weren't wiping properly before attempting to install the ROM. When flashing a ROM you need to perform a full wipe, this includes system, data, cache, and dalvik cache. This didn't cause the problem you experienced, but had the install succeeded you would have had other problems.
It might benefit you to read the OnePlus One FAQ thread:
http://forum.xda-developers.com/oneplus-one/help/faq-oneplus-one-frequently-questions-t2895136
And my guide thread:
http://forum.xda-developers.com/showthread.php?t=2839471
Transmitted via Bacon
Click to expand...
Click to collapse
Cheers thanks for that. I thought the ROM updated the firmware and modems so that's a lesson learned
So I download the modem and firmware and copy these into the download folder on the phone and install via TWRP recovery correct? Modem first then firmware? This will then put lollipop on the phone correct?
Then if I want to install a new ROM I need to do a full wipe. I just did not see that option and was just following the video tutorial associated with the Sabermod thread by wiping cache system and dalvik
Read your thread and will be doing a full nandroid & EFS back up prior to do any of the above
Thanks again

funkyirishman said:
Cheers thanks for that. I thought the ROM updated the firmware and modems so that's a lesson learned
Click to expand...
Click to collapse
CM12 does do that, but no other ROMs do.
funkyirishman said:
So I download the modem and firmware and copy these into the download folder on the phone and install via TWRP recovery correct? Modem first then firmware? This will then put lollipop on the phone correct?
Click to expand...
Click to collapse
Yes, install via TWRP recovery. It doesn't matter which order you flash them in. So install both, then go to the reboot menu, and select to reboot back to the recovery. This doesn't install Lollipop as such, this installs Lollipop compatible firmware.
funkyirishman said:
Then if I want to install a new ROM I need to do a full wipe. I just did not see that option and was just following the video tutorial associated with the Sabermod thread by wiping cache system and dalvik
Click to expand...
Click to collapse
Go to the wipe menu in TWRP, then select advanced wipe, from there you can choose which partitions you want to wipe (system, data, cache, dalvik cache), just don't wipe internal storage (that's your virtual sd card).
funkyirishman said:
Read your thread and will be doing a full nandroid & EFS back up prior to do any of the above
Thanks again
Click to expand...
Click to collapse
Very good, that's super important. It doesn't happen often, but sometimes the EFS partition will just randomly become corrupt, if you don't have a backup in that situation your phone is useless (you can't use someone else's EFS backup because it contains unique device identifiers).
Transmitted via Bacon

timmaaa said:
CM12 does do that, but no other ROMs do.
Yes, install via TWRP recovery. It doesn't matter which order you flash them in. So install both, then go to the reboot menu, and select to reboot back to the recovery. This doesn't install Lollipop as such, this installs Lollipop compatible firmware.
Go to the wipe menu in TWRP, then select advanced wipe, from there you can choose which partitions you want to wipe (system, data, cache, dalvik cache), just don't wipe internal storage (that's your virtual sd card).
Very good, that's super important. It doesn't happen often, but sometimes the EFS partition will just randomly become corrupt, if you don't have a backup in that situation your phone is useless (you can't use someone else's EFS backup because it contains unique device identifiers).
Transmitted via Bacon
Click to expand...
Click to collapse
Reading about back ups etc on the below when creating a recovery
-Make sure you check the md5 to verify its integrity.
How and what do you check?
Also I first do the back up. Then install the firmware and modems and then update the ROM.
I dont need to flash the stock kernal or fastboot images, correct?
Also doing a back up does it back it up to an internal SD Card or should I keep it on PC
Cheers

funkyirishman said:
Reading about back ups etc on the below when creating a recovery
-Make sure you check the md5 to verify its integrity.
How and what do you check?
Also I first do the back up. Then install the firmware and modems and then update the ROM.
I dont need to flash the stock kernal or fastboot images, correct?
Also doing a back up does it back it up to an internal SD Card or should I keep it on PC
Cheers
Click to expand...
Click to collapse
The download page for a ROM or kernel usually lists the md5 checksum for that particular file. An md5 is like a digital fingerprint of the file, so once you've downloaded it you use an md5 checking app/program to confirm that the md5 of the downloaded file matches the md5 listed on the download page. This confirms that the file hasn't become corrupt during the download, if even a single byte of information is corrupt in a file the md5 will be drastically different.
You don't need to flash the stock kernel or stock images, the numbered parts in my guide aren't steps, they're sections.
When you create your nandroid backup using TWRP it will automatically be saved to your internal storage. You should keep at least one backup on your phone at all times, think of it as an insurance policy just in case something goes wrong, you'l always have a known working OS there to save you. You should also copy it to your PC for safe keeping.

timmaaa said:
The download page for a ROM or kernel usually lists the md5 checksum for that particular file. An md5 is like a digital fingerprint of the file, so once you've downloaded it you use an md5 checking app/program to confirm that the md5 of the downloaded file matches the md5 listed on the download page. This confirms that the file hasn't become corrupt during the download, if even a single byte of information is corrupt in a file the md5 will be drastically different.
You don't need to flash the stock kernel or stock images, the numbered parts in my guide aren't steps, they're sections.
When you create your nandroid backup using TWRP it will automatically be saved to your internal storage. You should keep at least one backup on your phone at all times, think of it as an insurance policy just in case something goes wrong, you'l always have a known working OS there to save you. You should also copy it to your PC for safe keeping.
Click to expand...
Click to collapse
Perfect I will google an md5 checking app/program so for the Sabermod I need to check on the download page on their link below
http://forum.xda-developers.com/oneplus-one/development/rom-kernel-sabermod-cm-11-0-t2880407
Just checked their download link is not working but I downloaded the ROM to my PC previously and its in zip format can you check the MD5 v this?
Thanks

funkyirishman said:
Perfect I will google an md5 checking app/program so for the Sabermod I need to check on the download page on their link below
http://forum.xda-developers.com/oneplus-one/development/rom-kernel-sabermod-cm-11-0-t2880407
Just checked their download link is not working but I downloaded the ROM to my PC previously and its in zip format can you check the MD5 v this?
Thanks
Click to expand...
Click to collapse
You have nothing to check it against though.
Transmitted via Bacon

timmaaa said:
You have nothing to check it against though.
Transmitted via Bacon
Click to expand...
Click to collapse
Ok so the ROM I downloaded is called cm-12-20150324-ROBBIEL811-UBER4.8-bacon and is in zip format and the download link on the developers page is dead so I cannot check the md5 file?
Thanks

funkyirishman said:
Ok so the ROM I downloaded is called cm-12-20150324-ROBBIEL811-UBER4.8-bacon and is in zip format and the download link on the developers page is dead so I cannot check the md5 file?
Thanks
Click to expand...
Click to collapse
Well yeah, if you can't reach the download page there's no way to see what the md5 is. Not all download pages have it anyway, they should, but not all do.
Transmitted via Bacon

Soft brick downgrade CM12.1 to KitKat

Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!

I_HAVE_NO_IDEA said:
Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!
Click to expand...
Click to collapse
Well if you can boot into the recovery and if its custom (TWRP) wipe all the data on your phone. Second I would try to flash a ROM onto your device such as Resurrection Remix and see if that works. Update on your progress.

Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?

I_HAVE_NO_IDEA said:
Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?
Click to expand...
Click to collapse
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.

vtails said:
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.
Click to expand...
Click to collapse
Thank you. But I can't flash a cm12.1 atm (see my post below). I can only flash through fastboot. I'm not sure I properly understood you, what do you call 4 22 ?

FYI I managed to boot again. Here's what I did:
Flash a 5.x ROM, try to boot to let the system make partitions and stuff (I think)
Boot in TWRP and saw that system and cache were not mountable, so I wiped them.
Flash a cm12.1 (+ Gapps) and here we go!
Thank you for your help!

Stuck at google logo after updating bootloader and radio

hey guys,
just wanted to upgrade my sisters phone which was running an old 5.1 version (custom rom, so the phone was unlocked and rooted already) to an android 6.0.1 custom rom. so i flashed newest twrp and flashed 6.0.1 bootloader and radio.img via fastboot using wugfresh tool and the files from the thread on here. now when trying to get into recovery, im stuck at the google logo.
did is miss sth?
my sister will kill me
thanks much!

Did you perform a factory wipe after upgrading?

i did the following. i went to recovery and wanted to flash the xenon 6.0.1 rom. thus i did a factory reset and cleaned cache and system. then the flash failed with this executing binary update error. i went to fastboot and flashed bootloader and radio. now im stuck there. anyone please??

Flash a stock rom to get the phone back to factory settings.
Were you using the latest recovery to flash the rom? Is the rom designed for the hammerhead?

audit13 said:
Flash a stock rom to get the phone back to factory settings.
Were you using the latest recovery to flash the rom? Is the rom designed for the hammerhead?
Click to expand...
Click to collapse
yes i used the latest recovery. yes it is designed for hammerhead.
will i lose my internal sd media when flashing stock? because i want to avoid that.

If you did a factory reset like you said above you've already wiped the sd card.
Sent from my Nexus 9 using XDA Free mobile app

How to perform a clean install?

How to do a clean install(no rom installed just recovery)? I want to format everything and flash my rom thru otg. Shud I wipe everything when I boot to recovery?

I think internal storage is the correct option then though it also removes all media on the device. Otherwise clear system, data, cache, bootloader, dalvik. Then install the rom from external source.

Should I flash from fastboot the recovery(twrp)? It might get wiped once the wipe everything.

I have same doubts....

Mord0rr said:
I have same doubts....
Click to expand...
Click to collapse
So do I... You necro'd a 8 month old thread...

I tried to go through few thereds however I was unable to find an answer.
I'm still on 5.11 oreo a d official TWRP. I would like to update to newest pie, however I would go for clean flash.
How should I do it?
I already backed up all app+ data using titanium.
Should I just go to TWRP
1. Factory default
2. Wipe all
3. Wipe system. Data, davlik and cache
4 flash latest pie and don't reboot
5 reboot to twrp
6 flash twrp
7 reboot to TWRP and flash magisk
It it right?
Thank you

netgar said:
I tried to go through few thereds however I was unable to find an answer.
I'm still on 5.11 oreo a d official TWRP. I would like to update to newest pie, however I would go for clean flash.
How should I do it?
I already backed up all app+ data using titanium.
Should I just go to TWRP
1. Factory default
2. Wipe all
3. Wipe system. Data, davlik and cache
4 flash latest pie and don't reboot
5 reboot to twrp
6 flash twrp
7 reboot to TWRP and flash magisk
It it right?
Thank you
Click to expand...
Click to collapse
Swap 5 and 6

Flashing this phone looks like sorcery....
Miss all days we could go to TWRP, erase all **** and then just flash rom. Period.
Now, doing this can even brick the dam phone.
It sucks!
EDIT*
Did Nuke 9.0.5 and install fresh 9.0.3.:angel:

Mord0rr said:
Flashing this phone looks like sorcery....
Miss all days we could go to TWRP, erase all **** and then just flash rom. Period.
Now, doing this can even brick the dam phone.
It sucks!
EDIT*
Did Nuke 9.0.5 and install fresh 9.0.3.:angel:
Click to expand...
Click to collapse
That also happened to me. I do not know how to go to another custom ROM from another custom ROM without going to MsmDownloadToolV4 to unbrick my device. Actually i did unbrick my device twice already because of trying various custom ROM.
Also, is there a way to just restore from recovery then flash another custom ROM. Then if we want to change custom ROM again we can just restore from recovery again then flash another custom ROM?
Please help us guys. Thanks.