Probably bricked or hardware problem - Nexus S Q&A, Help & Troubleshooting

Hello all .
I've been lurking around for sometime and here I am asking for help . Here fow the story goes . A friend of mine had his nexus s stock/no root and to the last update given OTA in Greece I suppose 4.0.4 . Once , he woke up and the phone stuck on the google logo .The broken screen has nothing to do beacuse it worled like that for several months .
If battery is taken off and put in again it will start with the on/off button and will stuck on the logo . Then it won't shut down with the on off button and will stay on untill it runs out of juice . No side or touch buttons do anything . I have a rooted slimkat i9023 so he sent it to me . First thing tried to do was get to fastboot .No luck . It will go on and stick to the logo . The side buttons seem tight although I can't be sure if a contact inside broke . In a desperate attempt to fic that I ordered a usb jig I saw on youtube which I thought could get the phone running and with Odin I would try to reinstall a stock ROM . As I read in another thread ODIN is proprietary for samsung and fastboot is more or less the same google application . I tried the jig to my nexus to see what happens and the phone got to download mode . I started the bricked one with the jig and got that image yu see on the left asking about the bootloader . I can't go any further beacause there is nothing to select no buttons work and do anything . It sticks there . I thought it could be in download mode already so I connected to ODIN . Upon connection the :0 COM:4 lights up meaning I suppose there is some communication . Thought I should try it . Found a guide about odin , followed the steps and got a stock ICS rom for i9023 ] the 4.1.2 (JZO54K) . When I unzip the downloaded file it has no tar or mda files . It contains another zip called "image-soju-jzo54k" and some other files (flash.all radio e.t,c) .Nothing like what the guide (tar& MD5) suggests . I tried at that state , with the phone showing the lock to run fastboot devices and , of course , nothing turns out . As if no phone is connected . Can Odin be used or do I forget about .Can the phone be saved or has it met his master ? Anything else I can try .Thank you in advance .
Spiros

Anritsu said:
Hello all .
I've been lurking around for sometime and here I am asking for help . Here fow the story goes . A friend of mine had his nexus s stock/no root and to the last update given OTA in Greece I suppose 4.0.4 . Once , he woke up and the phone stuck on the google logo .The broken screen has nothing to do beacuse it worled like that for several months .
If battery is taken off and put in again it will start with the on/off button and will stuck on the logo . Then it won't shut down with the on off button and will stay on untill it runs out of juice . No side or touch buttons do anything . I have a rooted slimkat i9023 so he sent it to me . First thing tried to do was get to fastboot .No luck . It will go on and stick to the logo . The side buttons seem tight although I can't be sure if a contact inside broke . In a desperate attempt to fic that I ordered a usb jig I saw on youtube which I thought could get the phone running and with Odin I would try to reinstall a stock ROM . As I read in another thread ODIN is proprietary for samsung and fastboot is more or less the same google application . I tried the jig to my nexus to see what happens and the phone got to download mode . I started the bricked one with the jig and got that image yu see on the left asking about the bootloader . I can't go any further beacause there is nothing to select no buttons work and do anything . It sticks there . I thought it could be in download mode already so I connected to ODIN . Upon connection the :0 COM:4 lights up meaning I suppose there is some communication . Thought I should try it . Found a guide about odin , followed the steps and got a stock ICS rom for i9023 ] the 4.1.2 (JZO54K) . When I unzip the downloaded file it has no tar or mda files . It contains another zip called "image-soju-jzo54k" and some other files (flash.all radio e.t,c) .Nothing like what the guide (tar& MD5) suggests . I tried at that state , with the phone showing the lock to run fastboot devices and , of course , nothing turns out . As if no phone is connected . Can Odin be used or do I forget about .Can the phone be saved or has it met his master ? Anything else I can try .Thank you in advance .
Spiros
Click to expand...
Click to collapse
Seems like what you downloaded is a factory image. This image can only be used in fastboot mode.
If you can go to fastboot mode and get the phone recognized then there are lots of guides to use that file.
OR
If you want to try Download mode then here is a guide that you can try: http://sexynexus.blogspot.in/2012/06/flashing-with-odin-i9023-and-i9020t.html
Let me know if you need any other help.

smit.sanghavi said:
Let me know if you need any other help.
Click to expand...
Click to collapse
Thanks . I'll try it as soon as possible . Fastboot is out of the question , the buttons don't respond . I'll try download mode . Could you plain explain what "volume+ and volume-" means ? Switch off normaly , start and press both volume buttons ? What is the exact procedure ?

Anritsu said:
Thanks . I'll try it as soon as possible . Fastboot is out of the question , the buttons don't respond . I'll try download mode . Could you plain explain what "volume+ and volume-" means ? Switch off normaly , start and press both volume buttons ? What is the exact procedure ?
Click to expand...
Click to collapse
Power down your Nexus S and put it into “Download Mode” by holding Volume Up and Volume Down, and then clicking the Power button.
And then follow the steps in the link. Also, tell me what happens if you try this guide: http://www.droidviews.com/nexus-s-guide-flash-android-4-1-2-jzo54k-factory-image/
Try any of them first and then tell me.

smit.sanghavi said:
Power down your Nexus S and put it into “Download Mode” by holding Volume Up and Volume Down, and then clicking the Power button.
Try any of them first and then tell me.
Click to expand...
Click to collapse
I'll have my hands on the phone again next Monday and I'll let you know . I'm more of a pessimist to be honest because I'm sure I've tried all kind of combinations at start up . Thanks anyway

smit.sanghavi said:
Power down your Nexus S and put it into “Download Mode” by holding Volume Up and Volume Down, and then clicking the Power button.
And then follow the steps in the link. Also, tell me what happens if you try this guide: [[/URL]
Try any of them first and then tell me.
Click to expand...
Click to collapse
It's ' me again . I tried getting the phone to download mode with no luck . But if in general the S can get to download mode just with buttons it's weird I can't find a single video in youtube . The only video I came up with is "Nexus S: Come entrare in download mode con USB Jig" but he uses a jig . Maybe that works with the galaxy series . I also tried holding vol buttons down and starting my nexus , but it will boot normally . Either way I gave odin a go using the jig , nicely downloaded and extracted all necessary files . COM4 turns yellow upon usb connection . Hit start .
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Bootloader_I9023XXKA3.tar.md5 is valid.
<OSM> PDA_SOJU_GRJ22_TMO_EUR_MR2_SIGNED.tar.md5 is valid.
<OSM> MODEM_I9023XXKD1_REV_00_CL990283_SIGNED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> bootloader.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
New thing is that in "Unlock Bootloader" image you see as an attachment in the first post ,showing on the corrupted phone , now I see with red letters over the two usb lines " KA3...New eMMC Support Fail
As for the other guide "Nexus s Guide" you proposed , as I said in the first place , the phone will not get to fastboot . If it did I would have flashed a stock rom and mail it back . Starting with vol Up only leads to the google logo for eternity . Found some other posts regarding KA3 failure and it's probably hardware failure . By the way I found someone else experiecing the same problem , or at least similar .Just google "ka3 new emmc support fail" and you will find a post in GSM Arena .I would post the link but the system won't let me in the end . Anyway your help is much appreciated and unless someone else has something else to suggest I think it's time to let the phone go and grab its battery .

Related

weird

my phone wont boot up now it only has a phone a caution sign and a computer screen now and i cant get it off this.
Desg90000 said:
my phone wont boot up now it only has a phone a caution sign and a computer screen now and i cant get it off this.
Click to expand...
Click to collapse
What were you doing to get to this point? Do you know how to get to download mode? (Yellow digger)
Sent from my GT-I9000 using XDA App
um around last week sometime i tried to flash to stock cause my phone was stuck at clockwork recovery and now its at this. No i dont.
Wrong forum.
You also need to provide way more information than that.
Have you tried booting into Download Mode (read Step 1)? If that works, use Odin One Click to restore the stock ROM.
What were you trying to do before this happened? Did you unplug your phone during a tethered restore (a.k.a. Odin)?
Edit: Sorry, guess I was too slow. Anyway, use the link above to get into Download Mode. If that doesn't work, look into making a jig.
Ok well hopefully you can get into download mode with just using the phone
U will need odin one click to get back to stock (jf6)
Once odin is extracted - follow these steps
First pull the battery
Reinsert battery
Hold vol up and vol down simultaneously
While holding these buttons, Insert usb into phone
Sorry I can't give u links to all of these things at the moment. You will find odin in the dev section.. make sure u are using the JF6 version
Sent from my GT-I9000 using XDA App
Loggik said:
Wrong forum.
You also need to provide way more information than that.
Have you tried booting into Download Mode (read Step 1)? If that works, use Odin One Click to restore the stock ROM.
What were you trying to do before this happened? Did you unplug your phone during a tethered restore (a.k.a. Odin)?
Edit: Sorry, guess I was too slow. Anyway, use the link above to get into Download Mode. If that doesn't work, look into making a jig.
Click to expand...
Click to collapse
no i didn't unplug i left it in overnight thinking it would be done over night and woke up to what i described in the first post .
born_fisherman said:
Ok well hopefully you can get into download mode with just using the phone
U will need odin one click to get back to stock (jf6)
Once odin is extracted - follow these steps
First pull the battery
Reinsert battery
Hold vol up and vol down simultaneously
While holding these buttons, Insert usb into phone
Sorry I can't give u links to all of these things at the moment. You will find odin in the dev section.. make sure u are using the JF6 version
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yes this did work for me its in download mode now i ran it and its just in a design gears graphic image on my phone
Desg90000 said:
Yes this did work for me its in download mode now i ran it and its just in a design gears graphic image on my phone
Click to expand...
Click to collapse
With odin open, hold the buttons and plug in the usb - u will see the yellow digger.
Then press start - this will then format ur /system directory and reinstall the JF6 firmware .. u will not see designgears boot logo during this..
Sent from my GT-I9000 using XDA App
born_fisherman said:
With odin open, hold the buttons and plug in the usb - u will see the yellow digger.
Then press start - this will then format ur /system directory and reinstall the JF6 firmware .. u will not see designgears boot logo during this..
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
<ID:0/005> Firmware update start..
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
yet when it restarts the designgears logo pops up
Desg90000 said:
<ID:0/005> Firmware update start..
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
yet when it restarts the designgears logo pops up
Click to expand...
Click to collapse
This is the odin you are using?:
http://forum.xda-developers.com/showthread.php?t=731989
i wasnt but i will download now and use and post results
Now there's your problem

Samsung galaxy S 4G can't back to stock

please help !! i have tried to update the kernel and my phone was bricked.
i have tried to back to stock, everything is fine until odin said PASS! then the phone dosen't start in recovery mode , but he says Samsung Virant and he stay like that !
mouadm said:
please help !! i have tried to update the kernel and my phone was bricked.
i have tried to back to stock, everything is fine until odin said PASS! then the phone dosen't start in recovery mode , but he says Samsung Virant and he stay like that !
Click to expand...
Click to collapse
What phone do you have exactly? This forum is for the Galaxy S 4G, not the Vibrant. Also, what did you try to flash with ODIN?
i have samsung galaxy S 4G , i tried to back to stock .
mouadm said:
i have samsung galaxy S 4G , i tried to back to stock .
Click to expand...
Click to collapse
Sounds like you tried to put a Vibrant ROM on it, though, which is why it goofed. Can you get it into download mode by:
Power off the phone
Plug in the USB cable to the phone and computer
Hold down the volume up & volume down keys at the same time
Press and release the power button
Press the volume up button to get into download mode
or
Power off the phone
Remove the battery
Plug in the USB cable to the phone and computer
Hold down the volume up & volume down keys at the same time
Insert the battery while holding those keys
Press the volume up button to get into download mode
yes i can get into download mode , can yuou give me the right stock
mouadm said:
yes i can get into download mode , can yuou give me the right stock
Click to expand...
Click to collapse
Yeah, give this one from Whitehawkx a shot if you want the original Froyo KD1 ROM. If you want the latest Gingerbread 2.3.6, use this one from RaverX3X.
Both are flashed via ODIN & both contain the proper boot loaders. Let me know if you need any help with that.
Thanks ,, with Froyo KD1 how can i add the "Modded 3e Recovery"
mouadm said:
Thanks ,, with Froyo KD1 how can i add the "Modded 3e Recovery"
Click to expand...
Click to collapse
No worries, I hope you get it going again. If you're wanting the CWM recovery for Froyo I would suggest krylon360's [RECOVERY]CWM FINAL for the SGS4G - FROYO ONLY.
Another way would be to flash a kernel that has it built in. I believe the Bali kernel has it built in. Check out the [REF]{BIBLE} Galaxy S 4G (12/25/11) <10:00pm cst>. It has a lot of information and links that can help you out.
i tried to flash it with odin he says FAIL! several times
You have to get the phone into download mode first. You can do that a few ways and here are a couple:
Power off the phone
Plug in the USB cable to the phone and computer
Hold down the volume up & volume down keys at the same time
Press and release the power button
Press the volume up button to get into download mode
or
Power off the phone
Remove the battery
Plug in the USB cable to the phone and computer
Hold down the volume up & volume down keys at the same time
Insert the battery while holding those keys
Press the volume up button to get into download mode
Once it's in download mode & ODIN sees it, you should be able to flash.
Note the download is a .rar file, which is an archive. You'll need to un-rar it (I think 7Zip does this and there are other un-rar utilites) then put the un-archived file in the PDA section of ODIN and it should work.
it's exactly what i do , >>> FAIL! he stop in MODEM step
mouadm said:
it's exactly what i do , >>> FAIL! he stop in MODEM step
Click to expand...
Click to collapse
Can you copy & paste the whole log here? It's possible it's a bad download, too. Maybe re-download the file and try again.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959VUVKJ6-REV00-home-low-CL694130.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Sbl.bin
<ID:0/007> cache.rfs
<ID:0/007> factoryfs.rfs
<ID:0/007> modem.bin
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the log. Interesting. What version of ODIN are you using? I recommend 1.85 as I think it's the latest available. Also, re-download the file to make sure it's a good file.
Keep Odin open on the computer, keep the usb cable plugged into the computer
Pull out your battery and usb cable from the phone
Put the battery back in
Hold vol + and -, keep holding them.
Plug the usb cable into the phone.
Try flashing with Odin again once it detects your phone.
i downloaded odin 1.85 and i redownloaded the file but the same result .
when i try the stock (samsung vibrant) odin work , but he diden't boot in recovery mode , so it's blocked in the first screen ' samsung vibrant"
Pull out the battery on the phone and copy down everything it says on the white sticker and post it here.
he dosen't show anything
mouadm said:
he dosen't show anything
Click to expand...
Click to collapse
I think FB is trying to verify the model of the phone you have. Beneath the battery is a white sticker that should show you the model number and other information. Does the model number show SGH-T959V?
sorry i haven't understood you , yes the model is SGH-T959V ,
i think the problem is the file isn't the right one for my phone .

[Q] soft bricked tablet tab 2 p5113/pp5110? Firmware upgrade encountered an issue.

I have a samsung galaxy tab 2 10.1. It came to me as a pt 5113. When I rooted it and updated the software to 4.3 using cmworld nightly it changed to p5110.
I wanted to downgrade because I wasn't able to use a lot of things and felt limited. However, my tablet won't turn off until it runs out of battery and I'm trying to just return it to the way it was before I tried to downgrade but it's not letting me. So I think it might be bricked. I don't know if it's a soft brick or a hard brick... I'm just so lost. Can anyone help me find how to straighten everything out if it can or provide me with step by step instructions.
Is there a way where I can just start fresh and just turn my tablet back to the way it was when I first bought it?
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I am now stuck on the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." However, Kies won't recognize my tablet cause it's rooted and stuff. So I can't do that.
I tried using these websites:
http://forum.xda-developers.com/show....php?t=2258628
http://www.infamousdevelopment.com/i...890#msg890)*
they are essentially the same. I'm on odin right now and it won't go further than
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
my screen won't go into download mode or recovery mode.
I believe it's soft bricked but everything I find won't work. What should I do?
I also tried plugging it in and out with the odin screen up because some people said it helped but that didn't help me.
I tried doing the adb command window but my computer doesn't show a list of devices indicating that my tablet isn't connected... but it is..
What should I do? Dang Nabbit! :crying:
You can force the tablet to power off by holding in the power button about 10 seconds. It will then cold boot after a few seconds if you do nothing.
As soon as it powers off, try going into recovery by pressing the power and volume down keys until the Samsung 10.1 logo appears. If that fails, force power off again and try going into download mode, pressing power and volume up keys. If you can get into the download mode, connect to your PC and try installing TWRP with Odin.
Just a reminder, volume down is next to the power switch. Also remember to unplug the power or you can't get into either download or recovery modes!
Installing TWRP Recovery:
I use TWRP, some good instructions are here You already have the drivers and Odin installed, so skip that part, and go to where he installs TWRP Recovery with Odin.
- Go to ODIN window and click PDA. Browse your PC for the TWRP Recovery .tar file and then load it into ODIN.
- Don’t change any default settings of ODIN. Press the START button when you’re ready for the installation process.
- After the install is complete you will notice that ODIN says PASS and the tablet restarts.
- Wait for the tablet to reboot and then it will load the Android OS. This means that the installation was successful and you can disconnect the Galaxy Tab 2 10.1 from your PC.
Click to expand...
Click to collapse
See if that gets you going. Then you can try flashing a stock ROM.
Or try flashing this ROM It is a rooted version of stock 4.2.2 with busybox.
Be sure and wipe Data/Cache/Dalvik Cache as he instructs. This should get you back to a stock, rooted ROM.
No fix found so far
ron12 said:
You can force the tablet to power off by holding in the power button about 10 seconds. It will then cold boot after a few seconds if you do nothing.
As soon as it powers off, try going into recovery by pressing the power and volume down keys until the Samsung 10.1 logo appears. If that fails, force power off again and try going into download mode, pressing power and volume up keys. If you can get into the download mode, connect to your PC and try installing TWRP with Odin.
Just a reminder, volume down is next to the power switch. Also remember to unplug the power or you can't get into either download or recovery modes!
Installing TWRP Recovery:
I use TWRP, some good instructions are here You already have the drivers and Odin installed, so skip that part, and go to where he installs TWRP Recovery with Odin.
See if that gets you going. Then you can try flashing a stock ROM.
Or try flashing this ROM It is a rooted version of stock 4.2.2 with busybox.
Be sure and wipe Data/Cache/Dalvik Cache as he instructs. This should get you back to a stock, rooted ROM.
Click to expand...
Click to collapse
Ok, what does one do if one can't get to download OR recovery? It's starting to really P5113 me off!! I have been reading for two days now and still can't get this thing running. I've tried so many things I can't even remember them all. A friend wants to buy my tab 2, but I can't sell her a messed up tab. Somebody please help me out. I haven't been able to use Odin, no d/l mode. Can't even flash a recovery! Still can't get back to the basics and root the damn thang! There has to be a way to recover from this error "Firmware upgrade has encountered an issue". I'm ready to give it an issue of my own!
tab 2 10.1
after updating my tab2 10.1 using odin it failed and im in firmware upgrade encountered and the bad thing is i cant enter download or boot loader and also pc cant recognize it .please help .thxxxx
Sorry to necro bump, but did anyone find a fix to this? In the same situation. Thanks.
im in the same boat
Has anybody resurrected an Tab 2 when the Recovery Mode wont boot?
I bought a Tab 2 on Ebay, seemed he try´d to root it, and failed or the wrong Firmware.
Now i have it here, disassembled so i can cut of battery power and still, after an hard reset with no battery, i cant get with power + Volume up (or down) into download or recovery mode.
Is there any chance left or has the seller killed the nand flash partitions?
--
Lord Pinhead

I think i broke my phone completely.

It all started with me flashing a new rom. Okay, i was vaguely knowing what i was doing and it went without any problems. After that i noticed it had come with magisk, so I checked out magisk as i had never used it before. Got myself the uninstall zip in case anything went sideways and installed a module, then rebooted. Bad idea. The module apparently wasn't compatible with my device or my installation or whatever , making my phone get stuck while booting (at the SAMSUNG symbol). Okay, that's really bad, but i do know that you can get into download mode from here, so that's what i did. And no, i can't boot into recovery mode. Tried to get there every step of the way and it just doesn't want to work. Even
Code:
adb reboot recovery
doesn't want to work, which is quite depressing.
Eventually got hold of a stock .tar.md5, tried to flash it, bam.
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
as well as a
Code:
SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3
on the phone.
So odin doesn't work. Now my question is, is my phone completely broken? Am i able to do anything to it? Am i able to somehow boot into recovery mode to fix this ungodly mess?
Don't try with old firmware. Download latest...
AnimaLibera said:
It all started with me flashing a new rom. Okay, i was vaguely knowing what i was doing and it went without any problems. After that i noticed it had come with magisk, so I checked out magisk as i had never used it before. Got myself the uninstall zip in case anything went sideways and installed a module, then rebooted. Bad idea. The module apparently wasn't compatible with my device or my installation or whatever , making my phone get stuck while booting (at the SAMSUNG symbol). Okay, that's really bad, but i do know that you can get into download mode from here, so that's what i did. And no, i can't boot into recovery mode. Tried to get there every step of the way and it just doesn't want to work. Even
Code:
adb reboot recovery
doesn't want to work, which is quite depressing.
Eventually got hold of a stock .tar.md5, tried to flash it, bam.
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
as well as a
Code:
SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3
on the phone.
So odin doesn't work. Now my question is, is my phone completely broken? Am i able to do anything to it? Am i able to somehow boot into recovery mode to fix this ungodly mess?
Click to expand...
Click to collapse
Hi,
I have the same issue last week!
Your phone it's just FINE ! You only mess up "the original recovery and must be redone properly"!
For a fresh & clean install, you need (I recommend you to use the files from the LINKs provided):
- the latest TRWP Recovery - LINK
- the latest firmware (Nougat) - LINK and "hidden file" - LINK
- or a custom ROM for your S6 version - LINK.
To resolve, do the following:
1. Open Odin and uncheck "Auto Reboot";
2. Enter in Downloading Mode (home + vol DW + power button) on your S6 and connect to PC;
3. Flash in AP Odin the latest TRWP Recovery (don't close the Odin program);
4. Press "Reset" on Odin, disconnect the phone from your PC and enter again in Downloading Mode (home + vol DW + power button) and reconnect to PC;
5. Check "Auto Reboot" on Odin and flash again the TRWP Recovery in AP Odin (the phone will reboot);
6. When the phone reboot, by pressing continuously "home + vol UP + power button", enter in Recovery Mode;
7. In TRWP you must wipe everything (Dalvik, System, Data, Cache etc) including "Format Data" <<< it's mandatory;
8. Restart the phone and enter again in Recovery Mode by pressing continuously "home + vol UP + power button" and wipe again Dalvik, System, Data, Cache etc and "Format Data" - just to be sure ;
9. Download a custom ROM, copy to your phone and install it normally in TRWP.
After you done the first 8 steps and if you want to flash the latest original firmware (Nougat), do the following:
10. Donwload the original firmware and rename it in "xxxxxxx_xxxxxxxx_xxxxxxx_HOME.tar" (i mean, delete ".md5" from the end of the name);
11. Extract "hidden.img" file from original firmware and copy to your PC and rename it in "hidden.img.tar";
12. Enter in Downloading Mode (home + vol DW + power button) and on Odin, uncheck "Auto Reboot";
13. Flash the original firmware in AP Odin;
14. Don't close the Odin program but now check "Auto Reboot" on Odin;
15. Press "Reset" on Odin, disconnect the phone from your PC and enter again in Downloading Mode (home + vol DW + power button) and reconnect to PC (on Odin "Auto Reboot" must be checked);
6. Flash "hidden.img.tar" in AP Odin;
7. The phone reboot automatically and you will have the original firmware.
dinamo1975 said:
Hi,
I have the same issue last week!
Your phone it's just FINE ! You only mess up "the original recovery" and must be "redone properly"! You need the latest TRWP Recovery and the latest firmware (Nougat) from SamMobile.com or Samsung-Firmware.org or a custom ROM for your S6 version.
To resolve, do the following:
1. Open Odin and uncheck "Auto Reboot";
2. Enter in Downloading Mode (home + vol DW + power button) on your S6 and connect to PC;
3. Flash in AP Odin the latest TRWP Recovery (don't close the Odin program);
4. Press "Reset" on Odin, disconnect the phone from your PC and enter again in Downloading Mode (home + vol DW + power button) and reconnect to PC;
5. Check "Auto Reboot" on Odin and flash again the TRWP Recovery in AP Odin (the phone will reboot);
6. When the phone reboot, by pressing continuously "home + vol UP + power button", enter in Recovery Mode;
7. In TRWP you must wipe everything (Dalvik, System, Data, Cache etc) including "Format Data" <<< it's mandatory;
8. Restart the phone and enter again in Recovery Mode by pressing continuously "home + vol UP + power button" and wipe again Dalvik, System, Data, Cache etc and "Format Data" - just to be sure ;
9. Download a custom ROM (like this), copy to your phone and install it normally in TRWP.
After you done the first 8 steps and if you want to flash the latest original firmware (Nougat), do the following:
10. Donwload the original firmware and rename it in "xxxxxxx_xxxxxxxx_xxxxxxx_HOME.tar" (i mean, delete ".md5" from the end of the name);
11. Extract "hidden.img" file from original firmware and copy to your PC and rename it in "hidden.img.tar";
12. Enter in Downloading Mode (home + vol DW + power button) and on Odin, uncheck "Auto Reboot";
13. Flash the original firmware in AP Odin;
14. Don't close the Odin program but now check "Auto Reboot" on Odin;
15. Press "Reset" on Odin, disconnect the phone from your PC and enter again in Downloading Mode (home + vol DW + power button) and reconnect to PC (on Odin "Auto Reboot" must be checked);
6. Flash "hidden.img.tar" in AP Odin;
7. The phone reboot automatically and you will have the original firmware.
Click to expand...
Click to collapse
Still doesn't want to boot into recovery. It's just stuck at boot and the only thing i can actually boot into is the download mode. As for the original firmware, I've tried that but apparently I got hold of the wrong version or something. Currently downloading what I assume is the right one from rapidgator at a whopping 50~KBps, so that'll take another 4 hours. Thanks for trying to help though, I appreciate it.
EDIT: Leaving it on overnight drained the battery. I'm now trying to cheese my way into recovery mode by just holding down volume UP + home + power when it's drained but apparently it's too drained and doesn't start at all. Maybe i can get it to the point where it'll automatically turn off but I still have a % of battery life left?
AnimaLibera said:
Still doesn't want to boot into recovery. It's just stuck at boot and the only thing i can actually boot into is the download mode. As for the original firmware, I've tried that but apparently I got hold of the wrong version or something. Currently downloading what I assume is the right one from rapidgator at a whopping 50~KBps, so that'll take another 4 hours. Thanks for trying to help though, I appreciate it.
EDIT: Leaving it on overnight drained the battery. I'm now trying to cheese my way into recovery mode by just holding down volume UP + home + power when it's drained but apparently it's too drained and doesn't start at all. Maybe i can get it to the point where it'll automatically turn off but I still have a % of battery life left?
Click to expand...
Click to collapse
Read carefully again my post ! All you have to do is to follow my steps accordingly! I gave you the links for all the files you need!
Download SmartSwitch or Samsung Kies, put your phone in Download Mode, and start Emergency Software Recovery in SmartSwitch or Kies.
mildj84ns said:
Download SmartSwitch or Samsung Kies, put your phone in Download Mode, and start Emergency Software Recovery in SmartSwitch or Kies.
Click to expand...
Click to collapse
Samsung SmartSwitch tells me my device is unsupported. It also doesn't appear in the "List of devices requiring emergency recovery" in either piece of software.
AnimaLibera said:
Samsung SmartSwitch tells me my device is unsupported. It also doesn't appear in the "List of devices requiring emergency recovery" in either piece of software.
Click to expand...
Click to collapse
Open Kies, go to Tools/Firmware Upgrade and Initialisation
Enter your Model name in following format "SM-G920x"
Then enter your Serial Number (you can find it on the back of your phone)
Confirm everything that pops up.
mildj84ns said:
Open Kies, go to Tools/Firmware Upgrade and Initialisation
Enter your Model name in following format "SM-G920x"
Then enter your Serial Number (you can find it on the back of your phone)
Confirm everything that pops up.
Click to expand...
Click to collapse
There's probably no way I'm going to get the serial number seeing as i can't just open the back of the phone and i don't know where the box is that it came in.
AnimaLibera said:
There's probably no way I'm going to get the serial number seeing as i can't just open the back of the phone and i don't know where the box is that it came in.
Click to expand...
Click to collapse
It should be written at the bottom of the back cover, not behind it. (At least that's the case with EU models)
If that's not the case with your phone and you don't have the original box then you can try this:
Hold the power, home, and volume down buttons until the warning screen appears. Then press the home button.
mildj84ns said:
It should be written at the bottom of the back cover, not behind it. (At least that's the case with EU models)
If that's not the case with your phone and you don't have the original box then you can try this:
Hold the power, home, and volume down buttons until the warning screen appears. Then press the home button.
Click to expand...
Click to collapse
That just puts me right back into download mode. No idea what it was supposed to do.
AnimaLibera said:
That just puts me right back into download mode. No idea what it was supposed to do.
Click to expand...
Click to collapse
It was suppose to give you your S/N. But i guess that doesn't work on your device.
You must find your S/N somehow, i don't think there is other way to restore your phone.
mildj84ns said:
Open Kies, go to Tools/Firmware Upgrade and Initialisation
Enter your Model name in following format "SM-G920x"
Then enter your Serial Number (you can find it on the back of your phone)
Confirm everything that pops up.
Click to expand...
Click to collapse
Can confirm...
I own 2 devices one VDF2 Germany and the other one VDF UK
Bouth are G920F and have the S/N after IMEI behind at the bottom of the glass...
i wonder dont the rest S6 variants have it there too
---------- Post added at 12:47 PM ---------- Previous post was at 12:45 PM ----------
AnimaLibera said:
There's probably no way I'm going to get the serial number seeing as i can't just open the back of the phone and i don't know where the box is that it came in.
Click to expand...
Click to collapse
Go here and look at post #3, ppl comfirmed it working!
https://forum.xda-developers.com/galaxy-s6-edge/help/serial-t3133539
Hope it helps you out!
vforvlive said:
Can confirm...
I own 2 devices one VDF2 Germany and the other one VDF UK
Bouth are G920F and have the S/N after IMEI behind at the bottom of the glass...
i wonder dont the rest S6 variants have it there too
---------- Post added at 12:47 PM ---------- Previous post was at 12:45 PM ----------
Go here and look at post #3, ppl comfirmed it working!
https://forum.xda-developers.com/galaxy-s6-edge/help/serial-t3133539
Hope it helps you out!
Click to expand...
Click to collapse
Doesn't seem to work, pressing home just puts me into download mode and I believe I remember throwing the box away like a moron. There's nothing on/under the glass on the back either. I guess i'll have to try out the other stock firmware images i'm still downloading.
AnimaLibera said:
Doesn't seem to work, pressing home just puts me into download mode and I believe I remember throwing the box away like a moron. There's nothing on/under the glass on the back either. I guess i'll have to try out the other stock firmware images i'm still downloading.
Click to expand...
Click to collapse
i see....
Is your device G920F?
vforvlive said:
i see....
Is your device G920F?
Click to expand...
Click to collapse
It is
AnimaLibera said:
It is
Click to expand...
Click to collapse
Anyway it should be there....
If you gonna flash Nougat, just dont flash XEF and go for CYV
CYV got newest Changelist than XEF, that has many bugs!
vforvlive said:
Anyway it should be there....
If you gonna flash Nougat, just dont flash XEF and go for CYV
CYV got newest Changelist than XEF, that has many bugs!
Click to expand...
Click to collapse
CYV is better than XEF...i tried both
AnimaLibera said:
It is
Click to expand...
Click to collapse
Men, mine too! My 920F was in the same situation!
If you follow the steps i wrote, it work! None of this program will repair your phone "SmartSwitch", "Kies" etc.
Believe me, i tried all possibilities ! You must repair your recovery. Otherwise, nothing you can do!
Flash provided TWRP Recovery in AP on ODIN (first, with uncheck Auto Reboot and second with Auto Reboot check) and when your phone reboot, still press on home + vol UP + power button and enter in recovery. After that, wipe everything + FORMAT DATA and will be OK!
Okay, I'm pretty sure it's working now. It booted into TWRP, I made it install my custom ROM. Basically, it's working. To detail the steps in between...:
I downloaded stock firmware from a different site. No I'm not going to tell you the site, but it's pretty high in the google search results. Practically unavoidable.
I finally installed that after an ~8-9 hour download from rapidgator (Look, i know some of you out there are trying to make money by uploading content to these sites, but 8 hours is just ridiculous).
It failed at hidden.img.tar.
I installed the hidden.img.tar by first opening the firmware as an archive, then extracting hidden.img, then renaming it to hidden.img.tar as dinamo1975 described.
It eventually booted properly, then somehow it turned into a boot loop.
I went into download mode again and flashed TWRP from https://twrp.me/.
I made it boot into TWRP and installed a custom ROM.
Now the phone boots without problems and is back up and running.
Three things I've learned from this:
- ALWAYS have stock firmware ready. Stock firmware that matches your device. Google is your best friend here.
- Certain magisk modules can get your device stuck depending on your build. Be CAREFUL. If you're not sure if something is going to work, don't attempt to make it work.
- That last part goes for everything with electronics. If you're unsure if something is going to work, just stop right there, please.
EDIT: Is there any way to close this thread?
EDITEDIT: Nope this is bad. Stuck in a boot loop (boots up right to the OS up to where i have to provide my SIM pin, then restarts immediately) and it doesn't recognize my battery. Seen as 0% and TWRP doesn't even show a percentage. Could it be that I've gotten the wrong firmware yet again?

Samsung j+J415FN Bricked after try root and TWRP (even download mode didnt start)

Hi i tryed root my j4+ and upload TWRP from
https://forum.xda-developers.com/galaxy-j4+/development/recovery-twrp-3-2-3-1-galaxy-j4-j415f-t3876876
First download from sammobile newest ROM
Samsung firmware for the Galaxy J4+ SM-J415FN with product code PRT from Poland (Play). This firmware has version number PDA J415FNXXU4BSF6 and CSC J415FNPRT4BSG1
unpack and flash by ODIN.
Everything was ok, phone boot normaly I did this 3 times and every time everything was ok., but still cant flash
twrp_3.2.3-1_sm-j415f_30319
so i dont know why again try flash ROM but this time in ODIN i flash
J415FXXU4BSF7_patched_boot
over orginal BL and this destroy my phone.
Phone start only when i press VOL+ + VOL- POWER, show logo Samsung, after about 5s i see droid robot for about 0,5s some error on screen but phone off then.
Can enter download mode.
I tryed every combination VOLs and POWER, nothing.
Only one time i enter download mode get msg than system is corrupted or smtg like that and press VOL+ do enter bl or VOL- to restart. But when i press + i enter bl mode but for about 1s and phone off.
<ID:0/003> Added!!
<ID:0/003> Removed!!
Click to expand...
Click to collapse
What can i do
Vid how start my Samsung
Sorry for baaaad quality but dont have anything good for record vids
GeoEgbA said:
Hi i tryed root my j4+ and upload TWRP from
https://forum.xda-developers.com/ga...ecovery-twrp-3-2-3-1-galaxy-j4-j415f-t3876876
First download from sammobile newest ROM
Samsung firmware for the Galaxy J4+ SM-J415FN with product code PRT from Poland (Play). This firmware has version number PDA J415FNXXU4BSF6 and CSC J415FNPRT4BSG1
unpack and flash by ODIN.
Everything was ok, phone boot normaly I did this 3 times and every time everything was ok., but still cant flash
twrp_3.2.3-1_sm-j415f_30319
so i dont know why again try flash ROM but this time in ODIN i flash
J415FXXU4BSF7_patched_boot
over orginal BL and this destroy my phone.
Phone start only when i press VOL+ + VOL- POWER, show logo Samsung, after about 5s i see droid robot for about 0,5s some error on screen but phone off then.
Can enter download mode.
I tryed every combination VOLs and POWER, nothing.
Only one time i enter download mode get msg than system is corrupted or smtg like that and press VOL+ do enter bl or VOL- to restart. But when i press + i enter bl mode but for about 1s and phone off.
What can i do
Vid how start my Samsung
Sorry for baaaad quality but dont have anything good for record vids
Click to expand...
Click to collapse
That's not download mode.
You're releasing the buttons too early. Hold POWER + VOL UP + VOL DOWN with USB cable inserted and attached to the PC.
DO NOT release until you see the download mode screen then release all buttons except vol up.
Also some things to note:
Details are very sketchy, what is meant by cannot flash TWRP?
Why are you flashing the older TWRP version?
Second, did you enable OEM UNLOCK and disable RMM lock?
Lastly, flashing a kernel cannot in anyway corrupt the bootloader.
If the bootloader was corrupted the device wouldn't even turn on.
ashyx said:
That's not download mode.
You're releasing the buttons too early. Hold POWER + VOL UP + VOL DOWN with USB cable inserted and attached to the PC.
DO NOT release until you see the download mode screen then release all buttons except vol up.
Also some things to note:
Details are very sketchy, what is meant by cannot flash TWRP?
Why are you flashing the older TWRP version?
Second, did you enable OEM UNLOCK and disable RMM lock?
Lastly, flashing a kernel cannot in anyway corrupt the bootloader.
If the bootloader was corrupted the device wouldn't even turn on.
Click to expand...
Click to collapse
Yes i Hold POWER + VOL UP + VOL DOWN with USB cable inserted and attached to the PC but its same like on movie, over and over even if I don't release the buttons, i hold buttons for 3min and over and over again the same as in the movie.
ODIN sad some error but rly dont remember what was that. I flashed twrp_3.2.3-1_sm-j415f_30319 from [RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J4+/J415F/FN/G/DS
Yes i enabled oem in Developer options which ended factory reset.
I also remember that I enabled Nand Erase in ODIN, maybe it will help something.
GeoEgbA said:
Yes i Hold POWER + VOL UP + VOL DOWN with USB cable inserted and attached to the PC but its same like on movie, over and over even if I don't release the buttons, i hold buttons for 3min and over and over again the same as in the movie.
ODIN sad some error but rly dont remember what was that. I flashed twrp_3.2.3-1_sm-j415f_30319 from [RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J4+/J415F/FN/G/DS
Yes i enabled oem in Developer options which ended factory reset.
I also remember that I enabled Nand Erase in ODIN, maybe it will help something.
Click to expand...
Click to collapse
Why did you enable Nand erase? That was probably a bad move.
Can you show a screenshot of the error in odin?
Again you haven't explained what the issue was flashing twrp?
ashyx said:
Why did you enable Nand erase? That was probably a bad move.
Can you show a screenshot of the error in odin?
Again you haven't explained what the issue was flashing twrp?
Click to expand...
Click to collapse
Yeah now i know that was baaaad idea to check it, but i dont know why i did that it seems to me that I have read somewhere that it is sometimes good to do a nand format because it can help. And about twrp error i will not help you i dont have screen with error and rly dont remember what was about.
So is there any chance to brink back to life my phone? is there any way to get chance flash ROM and PIT files?
Ok i download PIT for my J415FN/DS
J4PRIMELTE_CIS_OPEN.pit
Click to expand...
Click to collapse
newest ROM via SamFirm
SM-J415FN_1_20190801184101_lhpojveop9_fac
Click to expand...
Click to collapse
oraz ver 8.1
[up_vnROM.net]_J415FNXXU1ARIK_J415FNOXM1ARIK_DBT_8.1_FULL
Click to expand...
Click to collapse
But i cant enter download mode.
Ok so I noticed one interesting thing. namely, when I leave the phone not connected to the computer / charger and for about 20-30 min min I do not try to do anything, e.g. start the download mode after pressing vol + and vol- download mode starts, a window pops up asking whether to start the download mode and when I press vol + how to connect the download cable the mode turns on for a moment about 1s and restarts and could not turn it on again unless I wait the next 20 min
w ODIN dostaje log
<ID:0/008> Added!!
<ID:0/008> Removed!!
Click to expand...
Click to collapse
GeoEgbA said:
Ok i download PIT for my J415FN/DS newest ROM via SamFirm oraz ver 8.1
But i cant enter download mode.
Click to expand...
Click to collapse
Have you tried booting to Recovery mode? Hold POWER + VOL UP
try this. open Odin, then fill all files except home csc,then try to flash firmware. before you connect device push both vol+ and vol- and power button on same time then connect usb cable, and dont do anything untill you see download mode..i brick my device so many time and ALWAYS can flash firmware no metter what i screw. so try it.btw i have same device. just for Croatia sell.
ashyx said:
Have you tried booting to Recovery mode? Hold POWER + VOL UP
Click to expand...
Click to collapse
Yes, i did this at film in 1 post. First show logo Samusng then for about 1s show robot and phone go power off
rudi021 said:
try this. open Odin, then fill all files except home csc,then try to flash firmware. before you connect device push both vol+ and vol- and power button on same time then connect usb cable, and dont do anything untill you see download mode..i brick my device so many time and ALWAYS can flash firmware no metter what i screw. so try it.btw i have same device. just for Croatia sell.
Click to expand...
Click to collapse
Ok will do this in 20 min
O so in ODIN i set
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and
now i waiting for start DL mode
GeoEgbA said:
I tried it but automatically after 1 second the phone reboots, I won't be able to click start. I will record a movie from the desktop and ODINA as it looks
Click to expand...
Click to collapse
yes i see your video,but i tell you dont connect usb BEFORE you push all buttons,so again first push all buttons(vol+,vol-,power button) and THEN connect usb.
rudi021 said:
yes i see your video,but i tell you dont connect usb BEFORE you push all buttons,so again first push all buttons(vol+,vol-,power button) and THEN connect usb.
Click to expand...
Click to collapse
Ok will do that, ODIN set set as in the pictures from the previous post
One more thing when i push all buttons and get warning when should push vol+ to continue first push and then connect usb?
GeoEgbA said:
Ok will do that, ODIN set set as in the pictures from the previous post
Click to expand...
Click to collapse
dont mess with odin and dont especially mess with PIT file. dont touch anything just open odin as admin as you wish,and fill up files and press start and press buttons then connect usb.thats it.no mess with anything. if you do something wich you dont understand you can use your device as paper weight.
rudi021 said:
dont mess with odin and dont especially mess with PIT file. dont touch anything just open odin as admin as you wish,and fill up files and press start and press buttons then connect usb.thats it.no mess with anything. if you do something wich you dont understand you can use your device as paper weight.
Click to expand...
Click to collapse
I did as you say and i was abble to flash, but in about 50% smtg happend
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 4267 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> aboot.mbn
<ID:0/009> sbl1.mbn
<ID:0/009> rpm.mbn
<ID:0/009> tz.mbn
<ID:0/009> devcfg.mbn
<ID:0/009> cmnlib.mbn
<ID:0/009> keymaster.mbn
<ID:0/009> apdp.mbn
<ID:0/009> msadp.mbn
<ID:0/009> NON-HLOS.bin
<ID:0/009> lksecapp.mbn
<ID:0/009> sec.dat
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> vendor.img.ext4
<ID:0/009> system.img.ext4
<ID:0/009> __XmitData_Write
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
and now when i press vol + - and power phone ask do enter download mode but when press vol+ again phone enter download mode and about 1s after restat and flash on screen error " Use the Emergency recovery function in the Smart Switch PC software" and restart over and over. Now even when i connect the charger to the phone this error show and phone are restarting over and over. Also when i press vol + and - and power when show warning about enter download mode and then press power i get this
Now whether it connects the charger cable or the computer i get error with Smart Swith PC restart and again and again
To enter Download mode must press vol+ vol- and power then plug usb cable then show warning and when press vol+ phone start restarting over and over
GeoEgbA said:
I did as you say and i was abble to flash, but in about 50% smtg happend
and now when i press vol + - and power phone ask do enter download mode but when press vol+ again phone enter download mode and about 1s after restat and flash on screen error " Use the Emergency recovery function in the Smart Switch PC software" and restart over and over. Now even when i connect the charger to the phone this error show and phone are restarting over and over. Also when i press vol + and - and power when show warning about enter download mode and then press power i get this
Now whether it connects the charger cable or the computer i get error with Smart Swith PC restart and again and again
To enter Download mode must press vol+ vol- and power then plug usb cable then show warning and when press vol+ phone start restarting over and over
Click to expand...
Click to collapse
You have an issue with your cable. Use a different cable and ensure it is short.
Also when entering download mode release all buttons except VOL UP when you see the blue screen.
Pretty much the issue here is dodgy cables and pilot error.
ashyx said:
You have an issue with your cable. Use a different cable and ensure it is short.
Also when entering download mode release all buttons except VOL UP when you see the blue screen.
Pretty much the issue here is dodgy cables and pilot error.
Click to expand...
Click to collapse
I tried to connect the phone as you requested on 2 different computers and 1 laptop using 4 different USB cables including 1 Samsung original cable always the same result. Also, connecting the phone to different chargers using different cables gives the same result. The phone turns on and off. It also behaves the same when connected to a computer
GeoEgbA said:
I tried to connect the phone as you requested on 2 different computers and 1 laptop using 4 different USB cables including 1 Samsung original cable always the same result. Also, connecting the phone to different chargers using different cables gives the same result. The phone turns on and off. It also behaves the same when connected to a computer
Click to expand...
Click to collapse
I was referring to the Xmit_data_Write error. That is usually due to a faulty cable/USB port.
ashyx said:
I was referring to the Xmit_data_Write error. That is usually due to a faulty cable/USB port.
Click to expand...
Click to collapse
Ok i did it. finally I was able to upload a new rom. The phone switches on the operator logo and suddenly a prompt appears asking for the security code. What code? The message is telephone is encrypted for security
ok wipe data help. Thx a loooot!!
GeoEgbA said:
Ok i did it. finally I was able to upload a new rom. The phone switches on the operator logo and suddenly a prompt appears asking for the security code. What code? The message is telephone is encrypted for security
ok wipe data help. Thx a loooot!!
Click to expand...
Click to collapse
Good stuff.

Categories

Resources