Related
I rooted my Verizon Galaxy S3 in desperation to enable wifi tethering, using the saferoot root method.
after finding out FoxFi patch was availiable, I don't have to root the phone.
Is there way to unroot ?
Thanks in advance.
Calvin
sungminee said:
I rooted my Verizon Galaxy S3 in desperation to enable wifi tethering, using the saferoot root method.
after finding out FoxFi patch was availiable, I don't have to root the phone.
Is there way to unroot ?
Thanks in advance.
Calvin
Click to expand...
Click to collapse
Kind of strange that you don't like root...To remove root just open up the supersu app and in settings/preference of the app there is an option to remove root and uninstall the app.
buhohitr said:
Kind of strange that you don't like root...To remove root just open up the supersu app and in settings/preference of the app there is an option to remove root and uninstall the app.
Click to expand...
Click to collapse
thank you for the prompt reply.
well, what are the advantages? I just don't see to many other than the little tweaks you can do here and there...
sungminee said:
thank you for the prompt reply.
well, what are the advantages? I just don't see to many other than the little tweaks you can do here and there...
Click to expand...
Click to collapse
The biggest one is Titanium backup which can backup all your system apps and user apps and can be store to any android device or when you need to perform a factory reset which save you a lot of time to re setup your stuff. Second, you can side load app like Adobe flash, Ad blocker etc...Third, you don't have to wait for foxfi to update, you just side load the rooted tethering app and done, or you can remove or freeze bload ware apps to keep you phone running faster....just named a few...
buhohitr said:
The biggest one is Titanium backup which can backup all your system apps and user apps and can be store to any android device or when you need to perform a factory reset which save you a lot of time to re setup your stuff. Second, you can side load app like Adobe flash, Ad blocker etc...Third, you don't have to wait for foxfi to update, you just side load the rooted tethering app and done, or you can remove or freeze bload ware apps to keep you phone running faster....just named a few...
Click to expand...
Click to collapse
thank you for the info.
i used to use titanium backup...but nowadays...i just find myself not using it as much..i guess cloud backups like dropbox and google drive may have affected me a bit.
but thank you for showing me the other aspects.
i do have a one more question on the phone...
how to i lock it up again from custom (unlock)?
i haven't done much for rooting and unrooting with the galaxy s3...
sungminee said:
thank you for the info.
i used to use titanium backup...but nowadays...i just find myself not using it as much..i guess cloud backups like dropbox and google drive may have affected me a bit.
but thank you for showing me the other aspects.
i do have a one more question on the phone...
how to i lock it up again from custom (unlock)?
i haven't done much for rooting and unrooting with the galaxy s3...
Click to expand...
Click to collapse
Once you flashed the 4.3 successfully, you're locked. The unlock (custom lock) display is a bug with the s3, you can just ignore this. My wife first phone is using a pure 100% stock and it shown as custom (with the unlock lock icon) and she had a gps issue with the phone and exchanged for a second one and this one also shown custom. Verizon knew this too, that's why they exchange another one without issue. You can tell if your phone has being alter by boot into download mode and you should see the legit status Also you could do a search and should find this is very common on the S3.
Are you saying that the root on a 4.3 updated Phone is un-doable?
jlmartinjr said:
Are you saying that the root on a 4.3 updated Phone is un-doable?
Click to expand...
Click to collapse
Now why you think that's what I said? yes you can unroot the 4.3 updated phone. You can uninstall the supersu or reflash 4.3.
buhohitr said:
Now why you think that's what I said? yes you can unroot the 4.3 updated phone. You can uninstall the supersu or reflash 4.3.
Click to expand...
Click to collapse
ya, unroot is possible. it's just that custom unlock show up in the booting sequence...not a big deal..
but unrooting works.
I need help plz plz I have a samsung s3 from Verizon but I flashed it with cricket but now I want unflash so I can connect it with verizon I need help plz plz
Cely001 said:
I need help plz plz I have a samsung s3 from Verizon but I flashed it with cricket but now I want unflash so I can connect it with verizon I need help plz plz
Click to expand...
Click to collapse
Give this a try:
Odin back to VRALG1 4.0 ICS- http://www.mediafire.com/download/kk...w_ship.tar.zip
Do not accept the OTA then dial *2767*3855# to reprovision the sim card
the thing is that I want to restart it to Verizon but then connect it to t-mobile sim card
---------- Post added at 04:34 PM ---------- Previous post was at 04:17 PM ----------
buhohitr said:
Give this a try:
Odin back to VRALG1 4.0 ICS-
Do not accept the OTA then dial *2767*3855# to reprovision the sim card
Click to expand...
Click to collapse
The thing is that I want to restore it with Verizon then but a t-mobile SIM card also thank you for ur quick respond
Hi,
Huawei Ascend G6-L11 4G
I've searched for this but can't find anything. I got this phone a couple of weeks ago and have managed to root it with Towelroot. Are there any plans for development of custom roms/recovery, unlock bootloader etc. Can't find anything any where ?
Thanks
hookey17 said:
Hi,
Huawei Ascend G6-L11 4G
I've searched for this but can't find anything. I got this phone a couple of weeks ago and have managed to root it with Towelroot. Are there any plans for development of custom roms/recovery, unlock bootloader etc. Can't find anything any where ?
Thanks
Click to expand...
Click to collapse
I did the same rooting it with Towelroot, yet quite a few things are blocked off for some reason from supersu access.
I can't use titanium backup nor root explorer with root privileges.
The camera shutter sound doesn't work like the old huawei phones. Apparently, when you snap a photo, the phone turns the volume up to maximum volume, so silent mode nor using apps to turn off the shutter sound doesn't work. I had to manually delete the shutter sound file. Replacing the file wasn't possible as well.
There is a way to go into recovery, but doesn't do much.
Tokobo said:
I did the same rooting it with Towelroot, yet quite a few things are blocked off for some reason from supersu access.
I can't use titanium backup nor root explorer with root privileges.
The camera shutter sound doesn't work like the old huawei phones. Apparently, when you snap a photo, the phone turns the volume up to maximum volume, so silent mode nor using apps to turn off the shutter sound doesn't work. I had to manually delete the shutter sound file. Replacing the file wasn't possible as well.
There is a way to go into recovery, but doesn't do much.
Click to expand...
Click to collapse
I rooted this phone with RootGenius ( link to tutorial):
http://huaweinews.com/2014/06/root-huawei-ascend-p7/
I have not noticed any of the problems that arise from root to Towelroot. I installed Supersu, Superuser has problems in Android 4.3.
mathei said:
I rooted this phone with RootGenius ( link to tutorial):
http://huaweinews.com/2014/06/root-huawei-ascend-p7/
I have not noticed any of the problems that arise from root to Towelroot. I installed Supersu, Superuser has problems in Android 4.3.
Click to expand...
Click to collapse
hi mathei, thanks for your reply. did this fix the problem?
hookey17 said:
hi mathei, thanks for your reply. did this fix the problem?
Click to expand...
Click to collapse
The above problems (sound shutter, root explorer) resolved. With TitaniumBackup does same problems, not want to make backup ...
Edit:
After reinstall SuperSu and BusyBox, I instaled Titanium Backup 2.1.5.6 free version (Play Store) and backup work!
Edit 2:
Atention!!!
I used the backup folder of SD ext. After I backup all applications and restart gave were deleted data !!! I have not found any backup !!! Titanium Backup not work!
I am using supersu with towelroot though.
Can I root again with RootGenius? Would that break anything?
Tokobo said:
I am using supersu with towelroot though.
Can I root again with RootGenius? Would that break anything?
Click to expand...
Click to collapse
I do not know if you can. RootGenius discover if the phone was rooted. I do not know if it supports reroot. You can try.:laugh:
EDIT:
For uninstall and backup i use with succes Root Uninstaller.
No incomming call
Hello.
I have the same as your, rooted with towelroot.
Everithing work fine.
But i have a only problem.
It is not my sim card, i have changed it.
Sometimes, when the screen is off, the incomming calls go direct to my voice mail.
The G6 doesn't ring and wake up.
I have reinstalled 2 times but no progress.
What about your experience ????
Thanks:good:
1mdl said:
Hello.
I have the same as your, rooted with towelroot.
Everithing work fine.
But i have a only problem.
It is not my sim card, i have changed it.
Sometimes, when the screen is off, the incomming calls go direct to my voice mail.
The G6 doesn't ring and wake up.
I have reinstalled 2 times but no progress.
What about your experience ????
Thanks:good:
Click to expand...
Click to collapse
My Huawei G6 is in for repair to service.Not connect to Wi Fi. After returning I will give details. Sorry!
need urgent hellp
I need dump of system partition for G6-L11 4g. My phone is semi-bricked PLease any one help me out. I bought it from europe but right now i am in india. Send me dump of system partition so i can flash it via fastboot.
Thnaks a lot
this is guide to backup
http://www.addictivetips.com/mobile...es-boot-recovery-and-system-partition-images/
mathei said:
My Huawei G6 is in for repair to service.Not connect to Wi Fi. After returning I will give details. Sorry!
Click to expand...
Click to collapse
I have sended mine to repair too.
3 - 4 week to wait.
After i ll give feed-back. :good:
1mdl said:
Hello.
I have the same as your, rooted with towelroot.
Everithing work fine.
But i have a only problem.
It is not my sim card, i have changed it.
Sometimes, when the screen is off, the incomming calls go direct to my voice mail.
The G6 doesn't ring and wake up.
I have reinstalled 2 times but no progress.
What about your experience ????
Thanks:good:
Click to expand...
Click to collapse
I don't have this issue. But are you sure it isn't your sim card? How did you reinstall the phone? I can't find any custom roms for it.
feetsonfire said:
I need dump of system partition for G6-L11 4g. My phone is semi-bricked PLease any one help me out. I bought it from europe but right now i am in india. Send me dump of system partition so i can flash it via fastboot.
Thnaks a lot
this is guide to backup
http://www.addictivetips.com/mobile...es-boot-recovery-and-system-partition-images/
Click to expand...
Click to collapse
How do you even flash the phone? D:
You guys have found mods for the phone? O_O
Tokobo said:
I don't have this issue. But are you sure it isn't your sim card? How did you reinstall the phone? I can't find any custom roms for it.
How do you even flash the phone? D:
You guys have found mods for the phone? O_O
Click to expand...
Click to collapse
Yes i'm sure. I have changed the sim card and the new one in running perfectly in my HTC.
I have reinstall it with the original rom.
I had rooted it whith towelroot, but nothing change.
Now it is unrooted for SAV.:good:
1mdl said:
Yes i'm sure. I have changed the sim card and the new one in running perfectly in my HTC.
I have reinstall it with the original rom.
I had rooted it whith towelroot, but nothing change.
Now it is unrooted for SAV.:good:
Click to expand...
Click to collapse
They have repaires it. It was a flash problème. Everything seems OK nos.
1mdl said:
They have repaires it. It was a flash problème. Everything seems OK nos.
Click to expand...
Click to collapse
it meens hardware problem?
please explain
This is what is on :
supply problem. default software repaired by a flash action:good:
1mdl said:
This is what is on :
supply problem. default software repaired by a flash action:good:
Click to expand...
Click to collapse
you said that:
"I have reinstall it with the original rom.
, but nothing change."
can you tell me what version rom is now
tokuna7 said:
you said that:
"I have reinstall it with the original rom.
, but nothing change."
can you tell me what version rom is now
Click to expand...
Click to collapse
First of all, the problem was back after root with towelroot.
Unroot and root with "KingRoot" evrything is OK now.
The installed rom :
4.3 emotion 2.0 lite
:good:
Help me
1mdl said:
First of all, the problem was back after root with towelroot.
Unroot and root with "KingRoot" evrything is OK now.
The installed rom :
4.3 emotion 2.0 lite
:good:
Click to expand...
Click to collapse
Can u plz tell me how to install this rom on Huewai ??
This is the original one. I don't know how to. Yous can find it on "http://www.needrom.com/category/huawei/ascend-g6/" :good:
---------- Post added at 07:34 AM ---------- Previous post was at 07:32 AM ----------
feetsonfire said:
Can u plz tell me how to install this rom on Huewai ??
Click to expand...
Click to collapse
This is the original one. I don't know how to. Yous can find it on "http://www.needrom.com/category/huawei/ascend-g6/" :good:
I am helping a person try and retrieve photos from a Samsung Galaxy S6 that is stock at the lock screen. The finger print scan is not working and they do not know there back up password. I researched two ways to get around this.
1. Entering in the google account user name and password
2. Signing into Find My Mobile with the samsung account information and unlocking the phone
If both of these options fail due to the owner not remembering there above credentials is there any other way to retrieve photos. How about putting the phone in dfu mode and using a program on a computer to copy photos from the internal storage. Is something like this possible? Appreciate any help on this issue.
Maybe flash a stock ROM with Odin?
That way all the data stays in tact and it may remove lock screen.
Sent from my SM-G920I using XDA Premium HD app
Thanks for the quick response. The lady is paranoid about losing her photos! Therefore flashing with Odin Stock Rom will not remove any data from the phone. Do you have instructions or a link on how to do this.
I also am able to sign into her google account through the web browser, but when I use those credentials to try and unlock the Galaxy S6 it says that the user name or email is wrong. Thanks
Obagleyfreer said:
Maybe flash a stock ROM with Odin?
That way all the data stays in tact and it may remove lock screen.
Sent from my SM-G920I using XDA Premium HD app
Click to expand...
Click to collapse
Sounds like she could be learning a hard lesson. Backup passwords, knowing what accounts you used to setup, photo backups all exist for a reason.
krelvinaz said:
Sounds like she could be learning a hard lesson. Backup passwords, knowing what accounts you used to setup, photo backups all exist for a reason.
Click to expand...
Click to collapse
I totally agree with your assessment! I don't understand how I can log into her Gmail account via the web and then when I enter the same information at the Galaxy S6 Unlock via Google it does not work. Could this have something to do with not being connected to the internet. It is saying that 4G LTE is connected. Doesn't seem to be a way to connect it to WiFi without unlocking home screen.
If this was my phone I would have no trouble trying to flash the Odin stock Rom, but do not want to lose her info incase someone else can retrieve it. Does flashing the Odin stock ROM wipe everything on the phone or does it retain photos and other information. Thanks
I'm in this same situation. Is there anyway to retrieve the pictures? Flashing with Odin does not wipe the phone?
Wasn't life easier when we had removable sd cards...?
Flashing the system partition does not touch the data partition.
Do you know how she managed to break the fingerprint reader, by the way?
My G920F stuck on bootloop because of fail on rooting and I was afraid of losing all my photos. First I flashed TWRP with Odin, booted to recovery mode and pulled photos and videos out with adb. Then I flashed stock firmware with Odin and made a factory reset (not mandatory). Everything is working fine now.
dsimpe said:
My G920F stuck on bootloop because of fail on rooting and I was afraid of losing all my photos. First I flashed TWRP with Odin, booted to recovery mode and pulled photos and videos out with adb. Then I flashed stock firmware with Odin and made a factory reset (not mandatory). Everything is working fine now.
Click to expand...
Click to collapse
I suppose doing this you had USB debugging ENABLED before the boot-fail? Or does it turn on USB debug when flashing TWRP?
---------- Post added at 01:49 PM ---------- Previous post was at 01:43 PM ----------
WahFai said:
Wasn't life easier when we had removable sd cards...?
Flashing the system partition does not touch the data partition.
Do you know how she managed to break the fingerprint reader, by the way?
Click to expand...
Click to collapse
Agree WahFai, much simpeler with SD-card! So you think flashing system partition will do the trick. I'll go read up on that, how to flash the system partition. In my case, afaik, the fingerprint reader did not break. The system failed accepting the unlock code from one day to another and she does not remember the backup code for the reader. Thanks for your reply!
All she wants are the pictures on the phone. She recently got a baby, all the pictures of the delivery are on the phone, so you sense the urgency to not loose the pictures. She'll still feel the effects 18 years from now.
By the way: does flashing the stock rom with odin void the warranty? Because the phone is still on warranty...
Flashing a stock rom via odin will not trip knox but flashing a custom recovery will.
Thanks for clearing that out for me.
WahFai said:
Flashing a stock rom via odin will not trip knox but flashing a custom recovery will.
Click to expand...
Click to collapse
---------- Post added at 03:32 PM ---------- Previous post was at 02:58 PM ----------
EDIT:
So I'm downloading the stock firmware right now. Still a question: I'm not sure which firmware is on the phone right now. Is it a problem if I flash a newer, say the newest available, stock firmware on the phone?
Go on samsung kies and back up the phone and the photos come up
Sent from my SM-N910V using XDA Free mobile app
madchainsawer said:
Go on samsung kies and back up the phone and the photos come up
Sent from my SM-N910V using XDA Free mobile app
Click to expand...
Click to collapse
The phone is locked out, it does not show up on Kies. Actually it does show, but says its locked.
Ok, I now flashed the stock ROM again. It still comes back on the locked screen. HELP!!
bronxboy1 said:
Ok, I now flashed the stock ROM again. It still comes back on the locked screen. HELP!!
Click to expand...
Click to collapse
At this point, it sounds like flashing a custom recovery (TWRP) is your only option.
dsimpe said:
My G920F stuck on bootloop because of fail on rooting and I was afraid of losing all my photos. First I flashed TWRP with Odin, booted to recovery mode and pulled photos and videos out with adb. Then I flashed stock firmware with Odin and made a factory reset (not mandatory). Everything is working fine now.
Click to expand...
Click to collapse
Hey dsimpe, I am willing to try this option, since I cannot acces de mediafiles after flashing the stock ROM. Can you confirm this will trip Knox? And I installed ADB Studio. I cannot find a simple explanation on how to pull de media with adb. Can you help me please?
---------- Post added at 03:22 PM ---------- Previous post was at 03:20 PM ----------
Sevael said:
At this point, it sounds like flashing a custom recovery (TWRP) is your only option.
Click to expand...
Click to collapse
I just saw your post Sevael. I recon this is my only option now. I need to figure this out to pull the media, after that I can do a factory reset or whatever, but I never used ADB before. Thanks for your reply.
bronxboy1 said:
Hey dsimpe, I am willing to try this option, since I cannot acces de mediafiles after flashing the stock ROM. Can you confirm this will trip Knox? And I installed ADB Studio. I cannot find a simple explanation on how to pull de media with adb. Can you help me please?
Click to expand...
Click to collapse
Check droidviews article of "How to Push and Pull Files on Android using the ADB commands".
I'm pretty sure that knox will be tripped.
Also go to my profile and check thread that I've started. I explain there how I did it.
If you've any problems post here or pm me.
I now found the instructions on how to pull files with ADB. I connected the phone to my pc and checked if the device was recognized. This was not the case. Does this mean, that the USB debugging was not enabled?
Edit: Thanks dsimpe. Saw the post too late again. Note to self: need to refresh page before making a reply... I'll go check out your posts. Thanks again.
bronxboy1 said:
I now found the instructions on how to pull files with ADB. I connected the phone to my pc and checked if the device was recognized. This was not the case. Does this mean, that the USB debugging was not enabled?
Edit: Thanks dsimpe. Saw the post too late again. Note to self: need to refresh page before making a reply... I'll go check out your posts. Thanks again.
Click to expand...
Click to collapse
My device wasn't recognized either before I flashed TWRP with Odin and I booted to recovery mode.
Ok, tnx dsimpe. I guess USB debugging must have been turned on before also on the phone? And can you confirm knox will be tripped?
Verstuurd vanaf mijn GT-N7100 met Tapatalk
Just wondering if anyone had any luck with the workarounds for our device? If so please post what ROM's work and which workaround worked. Also post whether the boot loader needed to be locked or not. I have been working since I found the official app last night, but So far no luck. I'm trying many custom ROMS as I don't really want another stock ROM, Hence why I am rooted. Anyway, any help would be boss! Thanks!
For me, it just has Google Play Services crashing whenever I try to add a card. This was after disabling SuperSU.
walkwithdeath said:
Just wondering if anyone had any luck with the workarounds for our device? If so please post what ROM's work and which workaround worked. Also post whether the boot loader needed to be locked or not. I have been working since I found the official app last night, but So far no luck. I'm trying many custom ROMS as I don't really want another stock ROM, Hence why I am rooted. Anyway, any help would be boss! Thanks!
Click to expand...
Click to collapse
did you try stock rooted thats my next attempt after I charge phone up a little. I been reading up and it seems stock rooted with supersu removing stock or xposed rootcloak work. Just nandroid and try it out nobody says you have to use it but if that works it may give us an insight on what to target for getting it to work
Yes, so far I believe thats what I read. At this point I have read a lot. The two methods involve unchecking enable superuser in supersu and then the root cloak method via xposed. Neither have worked in every custom ROM so far. I may try CM nightlies tho.
just an fyi i tried stock for the hell of it and it worked with just unchecking supersu root option. Maybe a buildprop edit to trick it to think its a basic stock rom may work
http://forum.xda-developers.com/oneplus-one/development/rom-cyanogen-os-12-1-rooted-cleaned-t3187016
Update. I have found a mothod that works, haven't tried the "pay" part, but I have Android Pay activated and working. The above link is the a rooted ROM with some mods that works. Its CM OS 12.1 and seems pretty stable, etc.
The method I used
1 Bootloader is locked. Just so you know. But all operations will function that you need.
1 Install ROM (use the link above for details, NO GAPPS NEEDED)
2 DENY ROOT/SUPERSU installation.
3 Boot ROM as normal
4 Open SuperSU
5 Click Enable SuperSU (This disables it/Unchecks the box. You will see a prompt saying uninstalling SuperSU)
6 Reboot
7 Install Google Play Services then Android Pay (APK's found on the web, GPS is 8.1.13)
8 Open Android Pay and follow prompts to install cards
9 Open SuperSU and recheck Enable SuperSU
At this point the phone is rooted and Android Pay is set up. I tried to do another card but got the same old error "cannot verify Android bs."
My conclusions:
If the ROM has a root option under developer settings, then Android Pay will not work. This ROM does NOT have that but instead has SuperSU installed. ROMS that have both will NOT function, I tried 3 or 4 today that did not work. I imagine they need to be CM based at this time as well. I bet someone better than me will come up with a better solution. This combination works for me. If anyone needs help, PM me. Also, If anyone has anything to add, Please do! Thanks!!!
walkwithdeath said:
http://forum.xda-developers.com/oneplus-one/development/rom-cyanogen-os-12-1-rooted-cleaned-t3187016
Update. I have found a mothod that works, haven't tried the "pay" part, but I have Android Pay activated and working. The above link is the a rooted ROM with some mods that works. Its CM OS 12.1 and seems pretty stable, etc.
The method I used
1 Bootloader is locked. Just so you know. But all operations will function that you need.
1 Install ROM (use the link above for details, NO GAPPS NEEDED)
2 DENY ROOT/SUPERSU installation.
3 Boot ROM as normal
4 Open SuperSU
5 Click Enable SuperSU (This disables it/Unchecks the box. You will see a prompt saying uninstalling SuperSU)
6 Reboot
7 Install Google Play Services then Android Pay (APK's found on the web, GPS is 8.1.13)
8 Open Android Pay and follow prompts to install cards
9 Open SuperSU and recheck Enable SuperSU
At this point the phone is rooted and Android Pay is set up. I tried to do another card but got the same old error "cannot verify Android bs."
My conclusions:
If the ROM has a root option under developer settings, then Android Pay will not work. This ROM does NOT have that but instead has SuperSU installed. ROMS that have both will NOT function, I tried 3 or 4 today that did not work. I imagine they need to be CM based at this time as well. I bet someone better than me will come up with a better solution. This combination works for me. If anyone needs help, PM me. Also, If anyone has anything to add, Please do! Thanks!!!
Click to expand...
Click to collapse
basicaly what I was saying it works on stock ONEPlus roms only it seems and you just have to deny root when adding cards. I tried to use lil while ago but it said my cards were not available yet to use with Android Pay
Just wanted to chime in with my post from another thread to consolidate threads:
I am running COS 12.1, rooted, with an unlocked bootloader. I recently upgraded to Android Pay after using Google Wallet for NFC payments for years on my old GS4 and my OnePlus One.
At first, I was unable to add my payment card due to being rooted. Easily fixed, I unrooted using SuperSU to do a full unroot and was able to add my card and complete the app setup.
The showstopper is that whenever I try to use it at a merchant, I end up with a screen that says Confirm your password - you must unlock to use Android Pay. No matter how many times I enter my password it just keeps asking over and over. I disabled the quick unlock feature under lock screen settings just in case that was the issue, but it made no difference. An ongoing support case with Google just came back with the following:
"The specific error message that you saw means that your device can't support Android Pay's advanced security. It seems that the phone manufacturer has modified the operating system to the point where it is no longer compatible with our software. You may want to use Android Pay on a different device for the most secure payments."
just as an update i re-flashed stock rom and realized using xposed and make any additional changes to the system folder causes it not to work whether I have supersu checked off or not. Now with that said i have it working fine with stock and having supersu loaded from twrp and play store nothing else. I also set up a tasker command to uncheck supersu prior to me using Android Pay. 1 click I guess I waas being lazy
Is your bootloader unlocked?
Sent from my Nexus 10 using XDA Premium 4 mobile app
playya said:
just an fyi i tried stock for the hell of it and it worked with just unchecking supersu root option. Maybe a buildprop edit to trick it to think its a basic stock rom may work
Click to expand...
Click to collapse
I have tried disabling root and root cloak. I am on Exodus rom and it has "morph mode" where I tried both methods in Exodus mode and AOSP mode. If this helps narrow down the problem.
For me on Exodus (haven't tried any of the morph modes), the unlocked bootloader seems to be the culprit. Hopefully someone figures out a workaround.
Hurricane Andrew said:
Is your bootloader unlocked?
Sent from my Nexus 10 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes... if you are asking me
---------- Post added at 02:29 PM ---------- Previous post was at 02:27 PM ----------
Digil said:
For me on Exodus (haven't tried any of the morph modes), the unlocked bootloader seems to be the culprit. Hopefully someone figures out a workaround.
Click to expand...
Click to collapse
bootloader is not the problem. Android Pay is looking for more than likely specific files in your system that are missing in AOSP or custom roms. I flashed stock and as long as I uncheck SuperSu its been working fine for me. I have added several cards over the past week
Deleted
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
playya said:
yes... if you are asking me
---------- Post added at 02:29 PM ---------- Previous post was at 02:27 PM ----------
bootloader is not the problem. Android Pay is looking for more than likely specific files in your system that are missing in AOSP or custom roms. I flashed stock and as long as I uncheck SuperSu its been working fine for me. I have added several cards over the past week
Click to expand...
Click to collapse
What Rom are you Using ?!?
Hurricane Andrew said:
Is your bootloader unlocked?
Sent from my Nexus 10 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No need for a locked bootloader on 1+ it works fine but strictly with stock
Skitts said:
Deleted
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
What Rom are you Using ?!?
Click to expand...
Click to collapse
I am running a stock rooted rom I found here. I tried to do it with Calkulins rom but it failed install for me. also no xposed or anything extra in system that may not need to be there. Its been working fine like this for a week now. I just used it again last night. I turn off SuperSu prior to using just for good measure
playya said:
I am running a stock rooted rom I found here. I tried to do it with Calkulins rom but it failed install for me. also no xposed or anything extra in system that may not need to be there. Its been working fine like this for a week now. I just used it again last night. I turn off SuperSu prior to using just for good measure
Click to expand...
Click to collapse
Thank Man I'll Give it A try see if I get the same results. As Of right now I'm Running Blisspop And I keep On getting the error.
Skitts said:
Thank Man I'll Give it A try see if I get the same results. As Of right now I'm Running Blisspop And I keep On getting the error.
Click to expand...
Click to collapse
So was I and I left them for crdroid which has a lot less issues. But I flashed stock to try out Android Pay and I have been surprisingly pleased. It will work just don't flash SuperSU but use built in version or update via TWRP option if asked after flashing rom
Does anyone have the apk for the version of Google Wallet right before the update to Android Pay? I'd like to at least have something that works.
rbrugman said:
Does anyone have the apk for the version of Google Wallet right before the update to Android Pay? I'd like to at least have something that works.
Click to expand...
Click to collapse
android authority has it and if you do a google search for it you will find it. also know that you have to un-tick auto updates in Google Play. I wiped data in Google play, Google Play Services prior to installing the now outdated version. I had to do this so that when I loaded the older version it will try and update the moment you try and set it up.
Anyone have a link for an decrpted boot image for the new ota update.? also can somebody merge all the different ways and do and don'ts for this build to be able to unlock (have the code) and flash TWRP and root this device. so many different solutions confusing on the best method to use. Please help Thank you.
Use this: https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
no need to decrypt image as superuser (superroot) does it for you.
As for unlocking bootloader, there's only one way. Just follow the TWRP thread for that
https://forum.xda-developers.com/mate-9/development/recovery-unofficial-twrp-huawei-mate-9-t3515617
ante0 said:
Use this: https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
no need to decrypt image as superuser (superroot) does it for you.
As for unlocking bootloader, there's only one way. Just follow the TWRP thread for that
https://forum.xda-developers.com/mate-9/development/recovery-unofficial-twrp-huawei-mate-9-t3515617[/QUWhuch
Which TWRP version 3.02 or 3.03 to use and also somebody already have the public and HW for this build done? Thanks for getting back to me so fast @ante0
Click to expand...
Click to collapse
larryblynn000 said:
ante0 said:
Use this: https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
no need to decrypt image as superuser (superroot) does it for you.
As for unlocking bootloader, there's only one way. Just follow the TWRP thread for that
https://forum.xda-developers.com/mate-9/development/recovery-unofficial-twrp-huawei-mate-9-t3515617
Click to expand...
Click to collapse
Which TWRP version 3.02 or 3.03 to use and also somebody already have the public and HW for this build done? Thanks for getting back to me so fast @ante0
Click to expand...
Click to collapse
3.0.2 is what you need.
And use this for HW and public
https://forum.xda-developers.com/showpost.php?p=71302827&postcount=627
ante0 said:
3.0.2 is what you need.
And use this for HW and public
https://forum.xda-developers.com/showpost.php?p=71302827&postcount=627
Click to expand...
Click to collapse
I can't get the hw and public to download. What am I doing wrong??
biggzo said:
I can't get the hw and public to download. What am I doing wrong??
Click to expand...
Click to collapse
yea i must be really dumb bc i dont understand the directions!
Here
Public http://update.hicloud.com:8180/TDS/...59/f2/full/public/update_data_full_public.zip
Hw
http://update.hicloud.com:8180/TDS/.../v76459/f2/full/hw/usa/update_full_hw_usa.zip
These are for MHA-l29c567b167
ante0 said:
Here
Public http://update.hicloud.com:8180/TDS/...59/f2/full/public/update_data_full_public.zip
Hw
http://update.hicloud.com:8180/TDS/.../v76459/f2/full/hw/usa/update_full_hw_usa.zip
These are for MHA-l29c567b167
Click to expand...
Click to collapse
Thank you you are the man really appreciated !!!!!!!!!!!!!!!!!!!!!!!
have one more question got everything done with success thanks to evey bodies help much appreciated now i wonder can someone write a procedure or tell me what ineed to do do be ready for the next update want to be ready because i believe cant apply it with an unlocked BL and root? Thanks again for all the help!!!!
larryblynn000 said:
have one more question got everything done with success thanks to evey bodies help much appreciated now i wonder can someone write a procedure or tell me what ineed to do do be ready for the next update want to be ready because i believe cant apply it with an unlocked BL and root? Thanks again for all the help!!!!
Click to expand...
Click to collapse
Did you use this guide for getting root?
[GUIDE]HOW TO ROOT YOUR MATE 9 with Decrypt Data in TWRP without needing a patched
Did it go well? I'm going to follow your steps as I have completely the same version of the device.
night_wind said:
Did you use this guide for getting root?
[GUIDE]HOW TO ROOT YOUR MATE 9 with Decrypt Data in TWRP without needing a patched
Did it go well? I'm going to follow your steps as I have completely the same version of the device.
Click to expand...
Click to collapse
yes worked like a champ as long as u have ur unlockcode follow the steps and it worked great!!!! i put superroot public and hw files on my sd card and all went smooth
larryblynn000 said:
have one more question got everything done with success thanks to evey bodies help much appreciated now i wonder can someone write a procedure or tell me what ineed to do do be ready for the next update want to be ready because i believe cant apply it with an unlocked BL and root? Thanks again for all the help!!!!
Click to expand...
Click to collapse
to update thru OTA u must reflash stock Recovery,then after updated to the latest firmware BL will be lock and your root will be gone,so u need to unlock BL and flash TWRP and redo all the rooting steps again.
Is there a op that tells how to do that and can i extract a copy of the stock recovery sorry to ask such obvious questions but im trying to learn how to do all this. Thanks again
larryblynn000 said:
Is there a op that tells how to do that and can i extract a copy of the stock recovery sorry to ask such obvious questions but im trying to learn how to do all this. Thanks again
Click to expand...
Click to collapse
well its just like how u flash twrp thru adb.or you can use twrp to flash stock recovery.img.for the stock recovery you can extract from the update.app of your current build using huawei extractor.
ok now that i said all good with this i am getting no notifications from messenger or facebook or yahoo. any ideas?
larryblynn000 said:
ok now that i said all good with this i am getting no notifications from messenger or facebook or yahoo. any ideas?
Click to expand...
Click to collapse
Try wiping cache and dalvik/art cache in twrp. Then check Settings - Notifications & Statusbar - Notifications Management if they're allowed.
ante0 said:
Try wiping cache and dalvik/art cache in twrp. Then check Settings - Notifications & Statusbar - Notifications Management if they're allowed.
Click to expand...
Click to collapse
done that no change ????????????????? THX
larryblynn000 said:
done that no change ????????????????? THX
Click to expand...
Click to collapse
Then I don't know.
Try reinstalling them?
Or do you mean notifications on lockscreen? Because they won't show.
Huawei locked it down good. (at least for me, can't even get Spotify to show current song)
Floatify works great for lockscreen notifications though.
Edit: Actually, more people seem to have notification bugs with Messenger and WhatsApp. Maybe it's just a Huawei thing?
Or did they work before rooting?
Could you also check that they're not being closed automatically by the super aggressive battery saver thingie?
Settings - Battery: check that Power Saving is not turned on.
Next click on the cogwheel in the battery screen and make sure "Close excessively power-intensive apps" is not turned on.
And check in Settings - Apps - [App you want to check] - Battery that "Close after screen locked" is not turned on.
ante0 said:
Then I don't know.
Try reinstalling them?
Or do you mean notifications on lockscreen? Because they won't show.
Huawei locked it down good. (at least for me, can't even get Spotify to show current song)
Floatify works great for lockscreen notifications though.
Edit: Actually, more people seem to have notification bugs with Messenger and WhatsApp. Maybe it's just a Huawei thing?
Or did they work before rooting?
Could you also check that they're not being closed automatically by the super aggressive battery saver thingie?
Settings - Battery: check that Power Saving is not turned on.
Next click on the cogwheel in the battery screen and make sure "Close excessively power-intensive apps" is not turned on.
And check in Settings - Apps - [App you want to check] - Battery that "Close after screen locked" is not turned on.
Click to expand...
Click to collapse
seem to have most working better and i loaded floatify only thing can you tell me is there a way to get rid of the floatify used to keep app in memory notification annoying Thanks!