Database Info

[Q] Cant Flash CM10

i follow this step from url http://forum.xda-developers.com/showthread.php?t=1997251
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
after reboot, it not go to recovery..plz help

It didn't enter recovery at fastboot reboot step? Which build fxp?
Try fastboot of boot.img again.
Sent from my ST27i

I think you have to press the volm down button :thumbup:
Sent from my Xperia Miro using xda app-developers app

Confirmed on Xperia J, vol down sends you to recovery.
To be sure I always press vol up and vol down few times when pink led is lit up. Works always.

Recovery update

So can anyone tell me how I can update my recovery I am already rooted just need to update it . do I need to flash it in fast boot or what
Sent from my Nexus 5 using Tapatalk

Connect your phone in fastboot and run "fastboot flash recovery <path_to_recovery.img>" Or if you don't want to use your PC you can use ROM manager or flashify from the play store. Flashify is only good if you have the image saved on your phone and is limited to three flashes a day on the trial version.
Sent from my Nexus 5 using Tapatalk

havy15 said:
So can anyone tell me how I can update my recovery I am already rooted just need to update it . do I need to flash it in fast boot or what
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Get into the bootloader by powering off the phone. Turn on the phone by pressing the down volume button and the power button at the same time. Rename the recovery you're trying to flash to recovery.img. Plug the phone into the computer and open a command prompt where you saved the new recovery image. Type fastboot flash recovery recovery.img

Help!!!!!!!!!!!!!!! Please!!!!!!!!!!!!!!!

here is what i did
1. soft root using xperialtoolkit
2. update ta
3. started unlock by official way
4. executed the unlock code twice
5. showed finished both time
6. phone stuck at animation
7. for some reason i downloaded the phantom kernel v7 extracted boot.img
8. did this : fastboot.exe flash boot boot.img
9. now when switch on my phone it shows phantom before getting stuck at animation
10. i got curious and entered recovery(pressed up key when phantom was showing on screen)
11. i got inside twrp recovery
12. WIPED DVALIK, PARTITION, CACHE
13. went recovery homescreen
14. clicked reboot
15. it says no os installed u sure u wanna reboot??
16. i reboot
17. now boot goes only till phantom screen................. no xperia bootscreen
18. gets stuck there
19. can still get into recovery
20. currently downloadin C2104_15.3.A.1.14_Generic_IN.ftf
pls tell me how to revive my dvice
flashtool is recognizing device in fastbootmode

You need to flash the stock rom now. That's it.

Not needed...
igohenrique said:
You need to flash the stock rom now. That's it.
Click to expand...
Click to collapse
Or you can flash the ROm that you want.
Enter into fastboot mode
open Flashtool
Flash system that you want
Flash userdata and boot that you want
That's it!
LUCK!
PS: If the problem persists, you may flash it all again (except the userdata.img)

ArnauGonzalez98 said:
Or you can flash the ROm that you want.
Enter into fastboot mode
open Flashtool
Flash system that you want
Flash userdata and boot that you want
That's it!
LUCK!
PS: If the problem persists, you may flash it all again (except the userdata.img)
Click to expand...
Click to collapse
okay so i flaashed the stock ftf.......
my set is back alive
this is my first xperia (frameworks are diffferent than htc) so can u please tell me where does the system and userdata are present..........(i am guessing they are inside the rom zips)
also the phantom screen is no longer showing......is my custom recovery gone and i need to flash it again ???
also can i flash the system nd userdata directly via custom recovery ?????
can u also tell me the cmd codes ??? (i used <<<<<<<fatboot.exe flash boot boot.img>>>>> last time inside the fastboot folder it started to show the twrp recovery)
P.S: i got unlocked botloader now

It's easier
saket_oo said:
okay so i flaashed the stock ftf.......
my set is back alive
this is my first xperia (frameworks are diffferent than htc) so can u please tell me where does the system and userdata are present..........(i am guessing they are inside the rom zips)
also the phantom screen is no longer showing......is my custom recovery gone and i need to flash it again ???
also can i flash the system nd userdata directly via custom recovery ?????
can u also tell me the cmd codes ??? (i used <<<<<<<fatboot.exe flash boot boot.img>>>>> last time inside the fastboot folder it started to show the twrp recovery)
P.S: i got unlocked botloader now
Click to expand...
Click to collapse
Noooooo no no no and no hahaahhahaha
Mate, it's easier than all of the codes in cmd.
Download flashtool from here and you will be a realised person hahahaah No, just kidding! This program is the easiest way to install the frimwares that you want. But, what Android ROM do you want?
Don't hesitate to ask me for anything!
LUCK!

I am downloading parallax. How to install using flash tool???
Also what is the modules of a kernel??? Do I have to flash it separately???
Sent from my C2104 using XDA Premium 4 mobile app

ArnauGonzalez98 said:
Noooooo no no no and no hahaahhahaha
Mate, it's easier than all of the codes in cmd.
Download flashtool from here and you will be a realised person hahahaah No, just kidding! This program is the easiest way to install the frimwares that you want. But, what Android ROM do you want?
Don't hesitate to ask me for anything!
LUCK!
Click to expand...
Click to collapse
So I read the 18 pages of aospa kitkat
This is what I understood
The Rom package has 3 parts
System. Img
Boot. Img
Userdata.img
I connect my phone in fastboot mode flash system and boot
Then flash userdata via recovery
Or
Put the boot and system in firmware folder and flash via flash mode. Again userdata flash in recovery
Is it correct????
Sent from my C2104 using XDA Premium 4 mobile app

Man, just flash in the following order:
System
Userdata
Boot
Sent from my C2105 using xda app-developers app
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
Then if you want you might install a kernel, with the recovery that you just have installed
Luck!
Sent from my C2105 using xda app-developers app

Try this
http://forum.xda-developers.com/xpe...itkat-aosp-t2643346/post50552984#post50552984
And let me know

[Q] Xperia miro bricked?

Hi,
I was trying to get cyanogenmod10 on my xperia miro and was following these steps:
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
Now when i was on step 4 the phone turned off, and now i can't do anything anymore. doesn't start up, no leds anymore and pc doesn't get a signnal when plugged in..
I tried alot, but think it is done.. is it?
Thanks alot

@dilinatorke
you need unlocked bootloader to flash custom kernel

AGuyfromH3LL said:
@dilinatorke
you need unlocked bootloader to flash custom kernel
Click to expand...
Click to collapse
I had unlocked bootloader

so it is bricked?

dilinatorke said:
so it is bricked?
Click to expand...
Click to collapse
are you sure you flashed cm10 kernel
and do you have flashtool

Naney said:
are you sure you flashed cm10 kernel
and do you have flashtool
Click to expand...
Click to collapse
yes i am sure.. and yes I have flashtool!

dilinatorke said:
yes i am sure.. and yes I have flashtool!
Click to expand...
Click to collapse
Charge the battery and try to flash ftf
Sent from my C1504

Micromax A94 stuck in boot loop

I rooted my Micromax A94 phone and to take a backup tried to flash cwm recovery (ClockworkMod) on it. But it got flashed to the boot not to the recovery. So now whenever i reboot it goes straight to cwm not regular boot screen. I tried flashing stock rom through cwm but it says cant mount sd card. I wiped everything possible. Still no change. Also i cant mount external sd either. If i press reboot now button it reboots back into cwm. Please Help Me.

Use fastboot flash boot.img boot command in adb on pc to correctly flash boot to its position
Sent from my SM-G355H using XDA Free mobile app

droid_god said:
Use fastboot flash boot.img boot command in adb on pc to correctly flash boot to its position
Sent from my SM-G355H using XDA Free mobile app
Click to expand...
Click to collapse
But will it still work if the phone is switched off?

Your device should be in fastboot mode.
Switch off device and hold.
Power * vol up button for 30 sec and it will be in fastboot mode.
Now connect it to pc . Start cmd and type command.
Use cmd from same folder where your boot.img exist on pc.
Boot.img can be found on any nandroidbackup you made just copy that in a folder ans get to work
Sent from my SM-G355H using XDA Free mobile app
---------- Post added at 09:44 PM ---------- Previous post was at 09:44 PM ----------
Your device should be in fastboot mode.
Switch off device and hold.
Power * vol up button for 30 sec and it will be in fastboot mode.
Now connect it to pc . Start cmd and type command.
Use cmd from same folder where your boot.img exist on pc
Sent from my SM-G355H using XDA Free mobile app

there are 2 way
1 > Boot by press up volume & power baton and set reboot And it's done ........
2 > make a Flash your mobile by pc on service center ............

Going to fastboot by either method is correct.
Either use rockers. Or asc command adb reboot bootloader.
Both are correct
Sent from my SM-G355H using XDA Free mobile app

I did that now all it does is load the starting logo and not do anything, I can still go into fast boot mode though. If I use the fast boot update command can I flash a new rom and will it overwrite everything else? Including boot.

First you have to remove boot, recovery , system, data , user data and then flash the mew rom.
Search for that on google
Sent from my SM-G355H using XDA Free mobile app