Hello. So the reason that I am writing this is that my phone wont boot any ROM from the time I tried to flash CM11 RC3. I know the requirements and i have AW3SOM3 recovery v2.7.0.0. After flashing a ROM my phone reboots as normal then it boots again in recovery which is not normal. Sometimes it hangs in splash screen and sometimes it boots the recovery. I did a Factory Reset as usual and cleaned cache and dalvik. Can anyone help me??? Thanks...
PROBLEM SOLVED
it was burnt NAND.
Related
Well i have been using the cm7 nightlies with no problem. Today i decided to flash the RC1 since im sick of having to flash everyday. So i flashed the rom with rom manager and my phone was stuck in a boot loop.
So i had to do a battery pull and then restore the rom i had just backed up. After restoring i reboot the phone and am stuck in a boot loop again. I did another battery pull did a full data wipe, wiped cache and dalvik cache. And reinstalled the nightly 41 and am no longer in a boot loop.
So i tried to install RC1 again and everything was fine after flashing rom and gapps. i thought everything was fine so i rebooted into recovery to flash the 1.2.2 BFS Netarchy kernel. Before flashing i wiped cache, and dalvik cache. And of course now im stuck into a boot loop again. Has anyone else experienced this problem? i believe i am doing everything right. This is the first time i have ever experienced this problem.
B2L said:
Well i have been using the cm7 nightlies with no problem. Today i decided to flash the RC1 since im sick of having to flash everyday. So i flashed the rom with rom manager and my phone was stuck in a boot loop.
So i had to do a battery pull and then restore the rom i had just backed up. After restoring i reboot the phone and am stuck in a boot loop again. I did another battery pull did a full data wipe, wiped cache and dalvik cache. And reinstalled the nightly 41 and am no longer in a boot loop.
So i tried to install RC1 again and everything was fine after flashing rom and gapps. i thought everything was fine so i rebooted into recovery to flash the 1.2.2 BFS Netarchy kernel. Before flashing i wiped cache, and dalvik cache. And of course now im stuck into a boot loop again. Has anyone else experienced this problem? i believe i am doing everything right. This is the first time i have ever experienced this problem.
Click to expand...
Click to collapse
try flashing the kernel without wiping the dalvik or cache.
personal, i dont use or recommend using rom manager, as it creates issues of its own. i download everything myself and flash in recovery without rom managers aid.
I'm trying that now. Thanks for the quick reply. I have even tried installing the rom without using rom manager and it still did the same thing to me. Hopefully this works.
So I tried to install Android Revolution HD 9.0 today, and after installation, I got stuck in a boot loop. Then I tried factory resets and cache partion wipes and multiple reinstalls and now it automatically boots into recovery.
Prior, I had a stock ROM, but it was rooted, but I was plagued with issuse such as random reboots and half the time on reboot, it would be stuck in a boot loop.
Can anyone help me out here?
I'm still fairly new to android modding beyond following instructions for installing CWM/Custom ROMs, so take that into consideration.
Factory reset or wipe phone in CWM and flash a new stock rom via Odin .
jje
Done and done. Thanks for the help!
Hey guys I really need help !!!!
I tried flashing all CM versions available using all CWM versions , Wiped Data,Cache and Dalvik cache before and after flashing I even tried using another Memory SD card I also flashed CM over stock & many versions of custom roms after rooting & installing CWM
But what happens is that when flashing is done & I choose (reboot system now) I got SAMSUNG logo then A white screen fade (Boot loop) :crying:
then nothing happens But I still can get into recovery & download mode but the phone doesn't boot
I really need to know why does that happen ????!!!!!!!
7mesa said:
Hey guys I really need help !!!!
I tried flashing all CM versions available using all CWM versions , Wiped Data,Cache and Dalvik cache before and after flashing I even tried using another Memory SD card I also flashed CM over stock & many versions of custom roms after rooting & installing CWM
But what happens is that when flashing is done & I choose (reboot system now) I got SAMSUNG logo then A white screen fade (Boot loop) :crying:
then nothing happens But I still can get into recovery & download mode but the phone doesn't boot
I really need to know why does that happen ????!!!!!!!
Click to expand...
Click to collapse
If still entering into download mode means there is no hard brick
This happens often and no need to worry
If you want to fix this just replace the boot.img in your custom rom by the boot.img of your stock rom than wipe everything and flash
Or if you have a backup of your stock rom system restore the boot from cwm
Hi there,
I was running CM 12.1 very smooth on my XT897 4G with f2f filesystem on cache about half a year. After rebooting I was stuck in a bootloop. The phone freezes during bootlogo and reboots again. Wiping Dalvik and reflashed CM 12.1 leads to no success. So I successfully flashed
asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml
Via RSD 6.1.6. But the same error appears, the only difference is the bootlogo.
TWRP can't mount the partitions I tried every possible version of it. I'm able to flash fastboot and enter recovery.
Is there anything I can do to get my loved modded phone back? :crying:
I have the same issue what did you do to resolve it?
if iam right u need a backup zip and load it via the recovery.
if u not have your own try this: http://forum.xda-developers.com/showthread.php?t=2532620
did you try to reflash a cm rom?
Hi, so short story is.
1. I had a backup of my stock rom that i did using twrp.
2. I flashed Franco Kernel for COS 13 downloaded from his website (https://kernels.franco-lnx.net/OnePlusOne/6.0.1/anyKernel/)
3. When i flashed i performed a Wipe dalvik cache from recovery
4. Reboted phone, and started optimizing apps but suddenly it rebooted.
5. Started optimizing apps but when it showed optimizing app 1 of 103 the phone keept restarting.
6. I decided to restore my backup made from TWRP, but then phone got stuck and restated everytime from the CYANOGENOS logo.
7. Since it was not booting, i decided to install from fastboot a clean CM13.
8. Flashed, finished and then the phone restarted, but heeey, again stuck in the CYANOGENOS Logo and restarting when the logo shows up.
9. I freak out and I don't know what to do.
So far:
fastboot is working
Cyanogen Recovery is Working ( tried the wipe from that, but still no luck)
When I plug the device directly to my PC, it shows "QHSUSB_BULK", but as i say: fastboot and COS recovery are working.
Can you guys help me, please
First of all, I let the phone charge till 100% on screen (yes, the charger indicator was working aswell)
Well, since my device was able to boot into both Recovery and Fastboot modes, I decided to flash a custom recovery one more time to replace the COS recovery. I flashed CWM 6 (because before TWRP was not helping) and performed a "backup" of the whole rom, just to see if it worked, and it did. After that, i wiped /factory reset from CWM.
Rebooted the device, and voilá I guess. The phone was able to boot into CM 13, now I'm happy to see that I was able to recover from this issue.
Still have no clue about why the FrancoKernel ended in a bootloop. Was the cache wiping a bad idea ?
leokook said:
First of all, I let the phone charge till 100% on screen (yes, the charger indicator was working aswell)
Well, since my device was able to boot into both Recovery and Fastboot modes, I decided to flash a custom recovery one more time to replace the COS recovery. I flashed CWM 6 (because before TWRP was not helping) and performed a "backup" of the whole rom, just to see if it worked, and it did. After that, i wiped /factory reset from CWM.
Rebooted the device, and voilá I guess. The phone was able to boot into CM 13, now I'm happy to see that I was able to recover from this issue.
Still have no clue about why the FrancoKernel ended in a bootloop. Was the cache wiping a bad idea ?
Click to expand...
Click to collapse
Yes,that's where it all went wrong.You should never wipe anything while flashing a custom kernel.
Mr.Ak said:
Yes,that's where it all went wrong.You should never wipe anything while flashing a custom kernel.
Click to expand...
Click to collapse
Lesson learned.