Can GT-I9300 wlan0 adapter operate in monitor mode and how?
not yet, but with a usb otg cable and usb wifi adapter may be.
what about this link? look on code.google.com /p/bcmon/source/browse/trunk/bcm4330/driver/src/bcmdhd/Kconfig?r=4
Related
Anyone know whether there are any USB Ethernet drivers in the kernel, so that I can connect a USB wired ethernet adapter into the OTG port?
I'd like to use the Tab2 to control an Elphel camera out in the wilds...
Hi
I want to connect my LAN connection via RJ45 cable .
What I want is
connect RJ45 using RJ45 to USB cable, and then via OTG cable to my phone. and then make a wifi hotspot. :laugh:
any idea guys?
Does a usb hub connected to the OTG adapter allow for the tablet to charge? With a device connected as well?
I am trying to connect my NVidia Sheild to a powered usb hub with no luck at this point.
Heres what I'm using:
Powered Hub
USB to Ethernet
OTG to USB
Male to Male USB
So I am taking the OTG to USB and connecting it to the Sheild OTG port. From there I have a Male to Male USB connecting the OTG to USB to the Powered usb hub. When I do this I can see that the Sheild's power light is orange which indicates to me that it is getting power and not acting as the USB Host for the Hub?
I did notice when I tried to use an air mouse directly with the OTG to USB it works as it should but not when it's connected to the powered usb hub instead, then nothing works (just charging). Also my ethernet adapter doesnt work via the powered usb hub or the OTG to USB.
BTW this whole physical setup worked just fine (plug and play) with both android MK808 and MK908. I was surprised that the Sheild isnt picking this up as well.
Can anyone tell me if I have incompatable hardware and if so what is compatable? Also I do not have ROOT access to the Sheild...yet, could that be the issue?
Many thanks in advance.
Chris
Hi,
I'm trying to use an android device with a USB C connector on a local wired network while still keeping it powered.
In the past I've achieved this just fine on an older device with a microUSB port and a microUSB Hub that had power + OTG USB to which I attached an USB to Ethernet Connector.
Currently I've tried using an Anker Premium USB-C Hub with Ethernet and Power Delivery.
A few months ago this hub would only power the device, but Ethernet/USB would not work.
With the latest updates (Android 7.1.1) either Ethernet works, but the device doesn't charge(if I connect the hub first, then power the hub)
or the device charges but Ethernet doesn't work (if I power the hub first, then connect Ethernet).
With the micro-USB Connector I've also spotted a pinout diagram that shows to provide power + OTG here:
http://electronics.stackexchange.com/questions/34741/can-an-android-tablet-serve-as-usb-host-and-be-charged-simultaneously-through-a
But I couldn't find an USB C equivalent pinout.
Any hints/tips on how I could both power and USB C connected Android device and keep it connected on an Ethernet Network ?
Thank you,
George