Database Info

Rom Manager for u8150 Huawei Ideos

Now there is official support from ROM Manager so just download it from market and install custom recovery
Thanks to MarcNvidic
OLD
So I found out this little trick by trial and error...
Since there is currently no support for our device.. :S
This is a working Rom Manager! FINALLY!
Backup, Flash, I think everything works!
Procedures:
1.Reboot into bootloader mode (power phone while pressing the red key and volume down)
2.Flash Clockworkmod Recovery for Ideos (Drivers-- install pdanet-- everything will automatically install)
3.Extract this files to the root of sdcard
4.Download and Install Rom Manager 3.0.1.4 using a file manager (market is a friend)
5.Start Rom Manager!
6.It should say, "Current Recovery: ClockworkMod 3.0.0.5" if everything went OK.
Click to expand...
Click to collapse
Thank you!
Click to expand...
Click to collapse

Reserved for possible improvements

:n3wb: Q's:
Could you post a quick how to?? (using terminal emulator -=or=- UltraJack - my pc don't like sdk)
PS - Could I pm you re, custom bootanimation?? Another thing I can't get to work!!
:I_Luv_Linux:

King_Rat said:
Could you post a quick how to?? (using terminal emulator -=or=- UltraJack - my pc don't like sdk)
PS - Could I pm you re, custom bootanimation?? Another thing I can't get to work!!
:I_Luv_Linux:
Click to expand...
Click to collapse
sure pm me...but what is what you cant do...copy files to sdcard...flash recovery...install rom manager using a file manager..and is done.
Look again at instructions, see if it's more clear.

Gotcha ^^
step 2. [is where my learning is at currently]
the rest of it I get
App -=or=- This
PS - Clicky <<<= if you wouldnt mind having a look ^^

King_Rat said:
Gotcha ^^
step 2. [is where my learning is at currently]
the rest of it I get
App -=or=- This
PS - Clicky <<<= if you wouldnt mind having a look ^^
Click to expand...
Click to collapse
Try the the one from softonic...the windows app will install drivers so you can continue....(then connect device in bootloader to computer, go to the device manager, manually install driver for "android device", select android bootloader interface.)

:mmm:
Are they the 'Android Device 1.0' drivers??
If so... my pc (win7 x64) auto. installed them when connecting in bootloader mode while installing 'UltraJackRecovery'.
So... how do I go about flashing 'ClockWordMod'??
Is it a similar process to UJR??
T.I.A

King_Rat said:
Are they the 'Android Device 1.0' drivers??
If so... my pc (win7 x64) auto. installed them when connecting in bootloader mode when installing 'UltraJackRecovery'.
So... how do I go about flashing 'ClockWordMod'??
Is it a similar process to UJR??
T.I.A
Click to expand...
Click to collapse
Its the same as flashing UJR

Sorted ^^
Succesfully applied
thnx for help(s)
@ maury... hope you don't mind if I share this with my Modding fraternity??
I'm admin @ ph. modding site (primarily Motorola - a few Android users)
Will give you & xda full credit o/c

King_Rat said:
Succesfully applied
thnx for help(s)
@ maury... hope you don't mind if I share this with my Modding fraternity??
I'm admin @ ph. modding site (primarily Motorola - a few Android users)
Will give you & xda full credit o/c
Click to expand...
Click to collapse
Of course! i DONT mind man
This is an open source community so everything is for everyone

cheers for that ^^
Testing Cyanoman thanks to ROM Manager ^^

hi，I am chinese，I want to learn the make rom ,could you help me?
My QQ is 68277855,thank you.

Do I place the clockworkmod folder in the root, or the downloads folder + setting file?

Smtih said:
Do I place the clockworkmod folder in the root, or the downloads folder + setting file?
Click to expand...
Click to collapse
in root the root of sdcard

maury1234 said:
So I found out this little trick by trial and error...
Since there is currently no support for our device.. :S
This is a working Rom Manager! FINALLY!
Backup, Flash, I think everything works!
Thank you!
Click to expand...
Click to collapse
Thanks for your work.
I installed Rom Manager 3.0.1.7 from Market and then installed/flashed cwm recovery from the Rom Manager. Rom Manager now shows Current ClockworkMod Recovery 3.0.2.4
Problem is it wont complete any tasks. eg. Boot into Recovery, Install ROM from sd card, Backup Current Rom. All these tasks hang on the IDEOS screen after they reboot and buttons remain lit. I have to pull battery to reboot.
How can I proceed?

GolfCranK said:
Thanks for your work.
I installed Rom Manager 3.0.1.7 from Market and then installed/flashed cwm recovery from the Rom Manager. Rom Manager now shows Current ClockworkMod Recovery 3.0.2.4
Problem is it wont complete any tasks. eg. Boot into Recovery, Install ROM from sd card, Backup Current Rom. All these tasks hang on the IDEOS screen after they reboot and buttons remain lit. I have to pull battery to reboot.
How can I proceed?
Click to expand...
Click to collapse
Problem is possibly you did it in the wrong order. And you didn't mention copying the files.
You need to flash the rom, copy the clockwordmod folder linked on the first page, into the root of your sd, then install rom manager. This worked fine for me

GolfCranK said:
Thanks for your work.
I installed Rom Manager 3.0.1.7 from Market and then installed/flashed cwm recovery from the Rom Manager. Rom Manager now shows Current ClockworkMod Recovery 3.0.2.4
Problem is it wont complete any tasks. eg. Boot into Recovery, Install ROM from sd card, Backup Current Rom. All these tasks hang on the IDEOS screen after they reboot and buttons remain lit. I have to pull battery to reboot.
How can I proceed?
Click to expand...
Click to collapse
Smtih said:
Problem is possibly you did it in the wrong order. And you didn't mention copying the files.
You need to flash the rom, copy the clockwordmod folder linked on the first page, into the root of your sd, then install rom manager. This worked fine for me
Click to expand...
Click to collapse
There is now official support for rom manager and Clockworkmod so no more is needed for rom manager to work...just flash

maury1234 said:
There is now official support for rom manager and Clockworkmod so no more is needed for rom manager to work...just flash
Click to expand...
Click to collapse
Yes thats the way I did it. Installed Rom Manager from market and it installed the ClockworkMod Recovery latest version for Ideos. I also downloaded the FusionIdeos zip file straight to my phone. But everything I select results in a reboot to the white screen with IDEOS across it and both buttons lit. All the actions below have this result:
In Rom Manager, press Reboot to Recovery
In Rom Manager, press Flash new ROM
Power on phone with buttons for bootloader
Power on phone with buttons for Recovery
Reset using settings>privacy>Factory Data Reset
I can only restart by pulling out the battery then turn on phone and it loads normally and runs the same as ever.
I really don't know what to do next.

hi
helo guys iam new to.android i want to backup my currenr rom bt unfortunatly nt sucesful when i ever tried to backup using rom.manager it appears a blackscreen i dnt knw whats the problem plzzz help bu step by step backup regards saad

saadiworld said:
helo guys iam new to.android i want to backup my currenr rom bt unfortunatly nt sucesful when i ever tried to backup using rom.manager it appears a blackscreen i dnt knw whats the problem plzzz help bu step by step backup regards saad
Click to expand...
Click to collapse
Do you have a custom recovery installed? If you do simply boot into recovery. (Turn the phone on while holding the volume up and call keys.) Once your phone reboots into recovery select backup and restore and backup.
If you don't have a custom recovery, first make sure you're using the latest rom manager. Open rom manager and select flash clockworkmod recovery and select huawei u8150 from the list. Once it flashes select reboot into recovery. Once your phone reboots into recovery select backup and restore.

[GUIDE] Fix BOOTLOOP with CWM zip !!! For All Phone

First of all,
Sometimes we facing BOOTLOOP, but we rarely make a backup so DATA in that backup already out to date.
And i found a method which can FIX BOOTLOOP WITHOUT RESTORING OLD BACKUP !
CAUTION !
THIS METHOD ONLY FOR ANYONE WHO FACING BOOTLOOP AFTER INSTALLING APPS, MODS, ETC
AND THAT APP IS NOT IMPORTANT FOR YOUR ROM
Things you will need
PC or Laptop
USB Cable (For connecting SD-CARD)
SD-CARD Reader (If your CWM Recovery can't mount SD-CARD)
WinRAR or WinZip
Notepad++
Patience!
Click to expand...
Click to collapse
So, lets begin..
STEP 1
If you facing bootloop after installing apps, mods, etc.
YOU MUST REMEMBER THE NAME AND LOCATION OF APPS/MODS YOU'VE PREVIOUSLY INSTALLED
Click to expand...
Click to collapse
STEP 2
Download my CWM zip HERE
Click to expand...
Click to collapse
STEP 3
In PC, after download, extract zip, open META-INF > com > google > android
Open updater-script with Notepad++
Click to expand...
Click to collapse
STEP 4
Edit this line
Code:
delete("/system/app/Home.apk","/system/etc/permissions/com.sonyericsson.uxpres.xml");
with name and location of apps/mods you've previously installed
Ex.
Code:
[CENTER]delete("/system/app/Crap.apk");[/CENTER]
And if you installed more than 1 app, you can insert another name and location in 1 line
Ex.
Code:
delete("/system/app/Crap.apk","/system/etc/permissions/com.bluesky.nxp-resolution.xml");
Click to expand...
Click to collapse
STEP 5
Save your modified updater-script and zipped the META-INF and system folder
Click to expand...
Click to collapse
STEP 6
Put your modified zip to your SD-CARD with mount sdcard option in CWM (with USB Cable) or using SD-CARD Reader
Click to expand...
Click to collapse
STEP 7
Flash It !
DONE !
Click to expand...
Click to collapse

Thanks, its is a lot easier to do with adb file manager thingy software I found online, connecting to pc via usb gives full access to phone file system partitions with root access, just deleting the files with it also works. :thumbup:
Why are SMARTphones soo... Freaking Dumb?

Or via adb
Connect phone/tablet to pc
In adb type:
adb delete("/system/app/Whatever.apk")
Done...
Disadv: USB Debugging must be enabled...

You sir are awesome, I flashed a zip that caused my Xperia U to bootloop and I couldn't delete the file I flahed via ADB! This is a simple yet amazing script, thanks for avoiding me to wipe data

Bert98 said:
You sir are awesome, I flashed a zip that caused my Xperia U to bootloop and I couldn't delete the file I flahed via ADB! This is a simple yet amazing script, thanks for avoiding me to wipe data
Click to expand...
Click to collapse
You're welcome

Before I tried the tutorial you or even try out all of the tutorials available on the internet, please help me to conclude my problem.
My device
(IPRO SENSEI FI)
(OS : KITKAT)
(ROOTED"Using kingoroot but I change to supersu") (ORIGINAL ROM NO CUSTOM)
(STOCK RECOVERY)
(NO HAVE ORIGINAL BACKUP OR Etc. T_T )
If you need more information Ask me.
My problem is Bootloop "Or you have another name, because I do not understand", just stop on logo but it still can go into recovery mode.
The story before the events bootloop or whatever name this problem, So as I recall before this incident I edit files and install Tweaks build.prop with applications My pimp and try other features, it works, but when I restart my device. You know what happened. when just stopped in my logo I does not do anything just to wait so that I fell asleep and when I woke up I realized this a bootloop Or what ? I do not know his name.
At that time I was just doing the usual way way., list.
(Wipe data / Factory reset)
(Wipe cache partition)
(reboot system now)
but no change
(Restore user data)
(backup user data)
(Reboot again)
Still same
(Apply update from ADB - I do not have a pc)
(Apply update from sdcard - No have ORIGINAL ROM, BACKUP ROM, CUSTOM ROM Etc.)
(Apply update from cache - I do not understand what this)
Just information There is writing on my recovery mode "Android System Recovery <3e> ALPS.KK1.MP7.V1" I do not know what this is but I show in case you need it.
I think your reading if this type of problem?
Is it still could be improved?
Installing custom rom whether other devices can fix this? What is this due to file damage build.prop?
How to fix it?
Can you tell tutorial to solve this problem?
If you told me to look for tutorials on the internet what keywords for this problem?
What is correct I asked here or I OOT?
What do I need to make this thread or just my neighbor asking questions like this course in every thread that said key bootloop?
You do not have to answer all of them just answer that you know or your own statement to me, I am newbie please guidance, Sorry in advance, and thanks afterward

hey the link isn't working anymore? can you please reupload?
Do you have to get into recovery? as i have no recovery on my phone Xperia z3

[Q] Rooting Prestigio Multiphone 5000 DUO

Hello!
I've recently bought a new phone - Prestigio Multiphone 5000 DUO and I am looking for a way to get it rooter, but didnt succseed in that hard task. I'd like to ask if any of you has an idea on how to do this?
Thanks in advance!

DMXvladi said:
Hello!
I've recently bought a new phone - Prestigio Multiphone 5000 DUO and I am looking for a way to get it rooter, but didnt succseed in that hard task. I'd like to ask if any of you has an idea on how to do this?
Thanks in advance!
Click to expand...
Click to collapse
This interested me too. Thx

I have found some instuction on cz sites but it didnt help... my problem is: windows can not recognise phone driver, but only in USB debugging mode... any idea why?
And I have problem with Google play. I can not install some app which are using my current location... ex PUTRAN.... This APP Is For public transport...
Need to change device name to sgs 2...
Thx anyone for ideas
Sorry for my Eng
Sent from my PAP5000DUO using xda app-developers app

ROOTING
So i finally have an opportunity to translate instruction how to root PAP5000Duo
instuction are only for PAP5000DUO version! Not for PAP5000TDUO!
EVERITHING YOU ARE DOING IS ON YOUR OWN RISK
1) Download drivers from http://www.prestigio.com/catalogue/MultiPhones/MultiPhone_5000_Duo#/product-support/driver
2) Download script http://uploaded.net/file/xdevcthz , link for autor http://forum.xda-developers.com/showthread.php?t=1886460
3) turn on unknown sources
4) turn on USB Debuging
5) Unzip file with script
6) plug in phone and install drivers
7) now run RunMe.bat
8) after openig window choose options 1. normal
9) after "click RESTORE" will appear on PC, on phone confirm "restore my data!
10) after 2 restars of phone, which will go automaticly shold phone start normally and app SuperSU will be installed
Installing CWM
1) Install MOBILEUNCLE from GooglePlay https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5tb2JpbGV1bmNsZS50b29sYm94Il0
2) download http://www.ulozto.cz/xMfnLUT/recovery-5000-cwm-6-0-1-5-zip (password: pap5000)
3) unzip it and upload to root of SD card (internal or external)
4) run MOBILEUNCLE (root acces must be allowed)
5) select Recovery Update and after shecing phone click on recovery_5000_CWM_6.0.1.5a and press OK
Sorry for my ENG but i've tried)

mrlamiczka said:
So i finally have an opportunity to translate instruction how to root PAP5000Duo
instuction are only for PAP5000DUO version! Not for PAP5000TDUO!
EVERITHING YOU ARE DOING IS ON YOUR OWN RISK
1) Download drivers from http://www.prestigio.com/catalogue/MultiPhones/MultiPhone_5000_Duo#/product-support/driver
2) Download script http://uploaded.net/file/xdevcthz , link for autor http://forum.xda-developers.com/showthread.php?t=1886460
3) turn on unknown sources
4) turn on USB Debuging
5) Unzip file with script
6) plug in phone and install drivers
7) now run RunMe.bat
8) after openig window choose options 1. normal
9) after "click RESTORE" will appear on PC, on phone confirm "restore my data!
10) after 2 restars of phone, which will go automaticly shold phone start normally and app SuperSU will be installed
Installing CWM
1) Install MOBILEUNCLE from GooglePlay https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5tb2JpbGV1bmNsZS50b29sYm94Il0
2) download http://www.ulozto.cz/xMfnLUT/recovery-5000-cwm-6-0-1-5-zip (password: pap5000)
3) unzip it and upload to root of SD card (internal or external)
4) run MOBILEUNCLE (root acces must be allowed)
5) select Recovery Update and after shecing phone click on recovery_5000_CWM_6.0.1.5a and press OK
Sorry for my ENG but i've tried)
Click to expand...
Click to collapse
how to download the script .there is no download link there please help

I've corrected the link try now

mrlamiczka said:
I've corrected the link try now
Click to expand...
Click to collapse
i dont understand the language .and the download link is error please .upload another link

jimae said:
i dont understand the language .and the download link is error please .upload another link
Click to expand...
Click to collapse
Everything is working.... I don't see any problem...
http://uploaded.net/file/xdevcthz
Which language you don't understand?

the downlink is error pls attach another link

Hi!
I'm using Prestigio 5000 duo and this method does not seem to work for me. Mostly the script remains in the infinite loop, sometimes it said it completed however there was a mount - no permission error and no rotting was done.
I also tried MTK tools without any luck. Is there any other way?
My version is: PAP5000DUO.V20130419.V1.0.10
Please help! I'd like to create a backup (install CWM) and fix the jumping wifi mac address bug. (apply custom mac address). Rooting is needed.
Thanks!

It seems like I have JB 4.1.1. and this one works for 4.0 only. I'm looking at this solution ( http://forum.xda-developers.com/showthread.php?t=2245259 ) but I haven't been brave enough to start it as I first tried to read back the recovery from the phone before flashing the new, it does not work (0% does not move). Also when I cat the proc/mtd file in abd shell it returns an empty list.
demodl said:
Hi!
I'm using Prestigio 5000 duo and this method does not seem to work for me. Mostly the script remains in the infinite loop, sometimes it said it completed however there was a mount - no permission error and no rotting was done.
I also tried MTK tools without any luck. Is there any other way?
My version is: PAP5000DUO.V20130419.V1.0.10
Please help! I'd like to create a backup (install CWM) and fix the jumping wifi mac address bug. (apply custom mac address). Rooting is needed.
Thanks!
Click to expand...
Click to collapse

Now I was able to read back but cannot download the recovery: SP Flash Tool Error 8038. I have Prestigio PAP5000Duo.
I have MTK6577 scatter file (MT6577_Android_scatter_emmc.txt). Should I press upgrade instead of download? Will it work with only a single recovery file?
Thanks!

OK, I figured out it myself. The process did not work with the scatter file that was provided with the recovery image. Using MTKDroidTools it was two clicks to create one. (/prec/mtd was empty, that was a nogo).
Now it works. Unfortunately mac address changing does not work even with root. I get random every time. What a pity...
demodl said:
Now I was able to read back but cannot download the recovery: SP Flash Tool Error 8038. I have Prestigio PAP5000Duo.
I have MTK6577 scatter file (MT6577_Android_scatter_emmc.txt). Should I press upgrade instead of download? Will it work with only a single recovery file?
Thanks!
Click to expand...
Click to collapse

So did anyone finally found out how to root it without any problems? Could someone pls post a video tutorial on youtube? I need that RAM memory it's crashing too often, and battery is draind really fast and I have the phone for about 4 weeks only. And I'd like to update kernel and do other things with franco kernel updater. (Look on google play-costs few bucks).

What to do with PAP5000T? Need more RAM. It's always in red,need 200 mb RAM more.
Sent from my PAP5000TDUO using xda app-developers app

Root canvas 2 running on ics

WELL WITHOUT WASTING MUCH OF THE TIME IN RAMBLING LET US SIMPLY START THE TUTORIAL:HOW TO ROOT CANVAS 2 RUNNING ON / WITH ICS......WHICH IS AS SIMPLE AS PLAYING SNAKE AND LADDER.
ROOTING.....
first of all enable USB DEBUGGING in your phone.
now connect your phone to your pc.
slide down the notification bar and select'touch for other options'.
now select MEDIA DEVICE option from that menu.
THEN DOWNLOAD bin4ry rooting tool from here..
extract it to any folder and open that folder.
now open runme.bat file from there.
it looks like a green coloured command prompt.
now just press 1 and hit enter.
then it will take about 1-2 mins as it is coping files to your phone.
(during this process your phone may reboot several times.)
THEN AFTER SOME TIME YOU WILL SEE THAT YOUR PHONES SCREEN HAS LIT UP.
IT WILL ASK YOU TO ENTER ENCRYPTION PASSWORD AND THEN FULL RESTORE YOUR PHONE.
IF YOU HAVEN'T SET UP ANY ENCRYPTION PASSWORD THEN JUST SELECT FULL RESTORE.
then after completing the process it will say press any key to continue.
now close this tool and switch on your phone.
you will find an app named superuser in your phone phone.
INSTALLING CLOCKWORK RECOVERY.
DOWNLOAD CLOCKWORK MOD RECOVERY FROM HERE.
put that downloaded recovery file (image) in the root of your sd card i.e. outside any folders otherwise mobile uncle tools won't detect it.
install an app named mobile uncle tools. YOU CAN DOWNLOAD IT FROM HERE.
open it and select recovery update option.
it will look for recovery file in your phone and display the result.
from there click on the recovery file and then select yes.
this will flash clockwork recovery in your phone.
And with dis u r done wid al d procedure..
Cill out
Hit thanx if i helped

Link of bin4ry rooting tool- www.mediafire.com/?wadbxnnxa8kf4b4
Hit thx if i helped

Link of cwm recovery (already renamed to recovery.img)
www.mediafire.com/download/ued9c4iqn6cr086/recovery.img

Good one.
Thx...:thumbup:

Please help..
Hello Jatin, I have followed all the above steps carefully but still I'm unable to root my device. Please refer the following screenshots and help me as early as possible. Thanks in advance.

CM Punk said:
Hello Jatin, I have followed all the above steps carefully but still I'm unable to root my device. Please refer the following screenshots and help me as early as possible. Thanks in advance.
Click to expand...
Click to collapse
First thing that please do not quote the whole post especially the main one....as it simply makes the thread ugly.
when you ask any question in a particular thread it is obvious that you will be asking question related to that only...:cyclops:
AND REGARDING THE ERROR.....IT LOOKS AS THERE ARE MORE THAN ONE EMULATORS RUNNING AND IT IS GIVING ERROR BECAUSE OF IT.
DISCONNECT ALL OTHER REMOVABLE DEVICES CONNECTED WITH YOUR PC...
HAVE YOU FOLLOWED ALL THE STEPS AS DESCRIBED IN THE THREAD? AND DOWNLOADED ALL THE FILES FROM THIS THREAD ONLY??IF NOT SIMPLY DOWNLOAD THEM FROM HERE AND PLS FOLLOW ALL THE STEPS STRICTLY AS GIVEN IN THE POST..
TRY AND REPORT.
BEST OF LUCK.:good:

[email protected] said:
First thing that please do not quote the whole post especially the main one....as it simply makes the thread ugly.
when you ask any question in a particular thread it is obvious that you will be asking question related to that only...:cyclops:
AND REGARDING THE ERROR.....IT LOOKS AS THERE ARE MORE THAN ONE EMULATORS RUNNING AND IT IS GIVING ERROR BECAUSE OF IT.
DISCONNECT ALL OTHER REMOVABLE DEVICES CONNECTED WITH YOUR PC...
HAVE YOU FOLLOWED ALL THE STEPS AS DESCRIBED IN THE THREAD? AND DOWNLOADED ALL THE FILES FROM THIS THREAD ONLY??IF NOT SIMPLY DOWNLOAD THEM FROM HERE AND PLS FOLLOW ALL THE STEPS STRICTLY AS GIVEN IN THE POST..
TRY AND REPORT.
BEST OF LUCK.:good:
Click to expand...
Click to collapse
Thanks for the quick response.
What does more than one emulator means?
I don't have any other removable device connected to my pc, and yes, I downloaded all the files from this thread only. What else can I do? Where am I missing out?

CM Punk said:
Thanks for the quick response.
What does more than one emulator means?
I don't have any other removable device connected to my pc, and yes, I downloaded all the files from this thread only. What else can I do? Where am I missing out?
Click to expand...
Click to collapse
Emulator is a hardware or software used for duplication of behavior of main system to host system.
In short your pc is main system here and device is emulated system.
I think you should than turn on usb debugging and set device as media storage and try.
IF YOU ARE STILL UNABLE TO ROOT THEN TELL ME AND I HAVE ANOTHER METHOD FOR YOU.:beer: cheers.

[email protected] said:
Emulator is a hardware or software used for duplication of behavior of main system to host system.
In short your pc is main system here and device is emulated system.
I think you should than turn on usb debugging and set device as media storage and try.
IF YOU ARE STILL UNABLE TO ROOT THEN TELL ME AND I HAVE ANOTHER METHOD FOR YOU.:beer: cheers.
Click to expand...
Click to collapse
I was trying with usb debugging all the way through with media storage as default but still no success. What's the other method?

CM Punk said:
I was trying with usb debugging all the way through with media storage as default but still no success. What's the other method?
Click to expand...
Click to collapse
No just on usb debugging
And are you trying to run it as administrator?
Sent from my C1604 using XDA Premium 4 mobile app

icoolguy1995 said:
No just on usb debugging
And are you trying to run it as administrator?
Sent from my C1604 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope. I'm doing exactly as mentioned above.I even tried it on another os of windows 7 and another laptop too, but to no avail.

CM Punk said:
Nope. I'm doing exactly as mentioned above.I even tried it on another os of windows 7 and another laptop too, but to no avail.
Click to expand...
Click to collapse
So here comes the second method.
FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools
link: http://db.tt/3JhQmUWh
Password of sp flash [email protected]
2.recovery image
link: www.mediafire.com/download/2j9rlu41ksnz83z/recovery.zip
3.superuser binaries
link: download.chainfire.eu/310/SuperSU-v1.04.zip
Extract sp flash tools and recovery.zip to get recovery.img( .img is the file type)
open sp flash tools(run as administrator)
.
click on scatter loading option and browse for the file in that folder
where you have extracted flash tools.you will find a text file...select it.
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RECOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
close sp flash tools and disconnect ur fone from ur pc and put the battery back.
WITH THIS U HAVE FLASHED CLOCKWORK RECOVERY ON YOUR CANVAS 2.
place the superuser.zip file in your phone's sd card(prefferably internal)
but do not extract it.
now BOOT INTO CLOCKWORK RECOVERY MODE by holding power key+vol.up key+vol.down key.
select install zip from sd card
then choose zip from internal sd card(if you have placed it in internal sd or otherwise select choose zip from sd card)
select the above placed zip and flash it.....
go back and reboot system
AFTER REBOOTING YOU WILL FIND A SUPERUSER APP IN YOUR PHONE
THIS MEANS THAT YOUR PHONE HAS BEEN ROOTED
Hit thx...it wont cost u

[email protected] said:
So here comes the second method.
FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools
link: http://db.tt/3JhQmUWh
Password of sp flash [email protected]
2.recovery image
link: www.mediafire.com/download/2j9rlu41ksnz83z/recovery.zip
3.superuser binaries
link: download.chainfire.eu/310/SuperSU-v1.04.zip
Extract sp flash tools and recovery.zip to get recovery.img( .img is the file type)
open sp flash tools(run as administrator)
.
click on scatter loading option and browse for the file in that folder
where you have extracted flash tools.you will find a text file...select it.
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RECOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
close sp flash tools and disconnect ur fone from ur pc and put the battery back.
WITH THIS U HAVE FLASHED CLOCKWORK RECOVERY ON YOUR CANVAS 2.
place the superuser.zip file in your phone's sd card(prefferably internal)
but do not extract it.
now BOOT INTO CLOCKWORK RECOVERY MODE by holding power key+vol.up key+vol.down key.
select install zip from sd card
then choose zip from internal sd card(if you have placed it in internal sd or otherwise select choose zip from sd card)
select the above placed zip and flash it.....
go back and reboot system
AFTER REBOOTING YOU WILL FIND A SUPERUSER APP IN YOUR PHONE
THIS MEANS THAT YOUR PHONE HAS BEEN ROOTED
Hit thx...it wont cost u
Click to expand...
Click to collapse
I'm stuck at the point where I'm supposed to click the download option in the flash tool coz nothing is happening after that. A dialogue box pops up which reads "Not all images are correctly loaded which may cause boot up issue! Do you still want to go on downloading anyway?" And when I'm clicking on Yes, the download progress is remaining unmoved at 0%. plz help. Screenshot included.
EDIT : Looks like this method is for jellybean. I'm using stock ics.

I prefer you use binary4u method i think you are getting these error because when you were rooting a another device was connected or try to as admin
Sent from my C1604 using XDA Premium 4 mobile app

icoolguy1995 said:
I prefer you use binary4u method i think you are getting these error because when you were rooting a another device was connected or try to as admin
Sent from my C1604 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ya i also thought that this could be the reason but he told me that only one device is connected...that why i asked him to follow the method of rooting jellybean because it also works on ics.

CM Punk said:
I'm stuck at the point where I'm supposed to click the download option in the flash tool coz nothing is happening after that. A dialogue box pops up which reads "Not all images are correctly loaded which may cause boot up issue! Do you still want to go on downloading anyway?" And when I'm clicking on Yes, the download progress is remaining unmoved at 0%. plz help. Screenshot included.
EDIT : Looks like this method is for jellybean. I'm using stock ics.
Click to expand...
Click to collapse
YOUR PROBLEM IS SIMPLY THIS THAT PRE- LOADER DRIVERS FOR YOUR PHONE ARE NOT PROPERLY INSTALLED IN YOUR PC. That's why sp flash tools is unable to connect to your phone and flash recovery.and so there is no progress.
TO INSTALL PROPER DRIVERS GO TO THIS THREAD.
Link: http://forum.xda-developers.com/showthread.php?t=2370906
And i know that the method i suggested is to root jellybean but it works fine on ics also ( but you cannot root jellybean via ics method)
**After installing proper drivers try again the above mentioned method and it should work.
And regarding that message... it will always come because all the images required to flash a new firmware are not properly loaded.
Ignore it because you are after all not flashing a whole new firmware but simply recovery in your phone.
Best if luck.

[email protected] said:
YOUR PROBLEM IS SIMPLY THIS THAT PRE- LOADER DRIVERS FOR YOUR PHONE ARE NOT PROPERLY INSTALLED IN YOUR PC. That's why sp flash tools is unable to connect to your phone and flash recovery.and so there is no progress.
TO INSTALL PROPER DRIVERS GO TO THIS THREAD.
Link: http://forum.xda-developers.com/showthread.php?t=2370906
And i know that the method i suggested is to root jellybean but it works fine on ics also ( but you cannot root jellybean via ics method)
**After installing proper drivers try again the above mentioned method and it should work.
And regarding that message... it will always come because all the images required to flash a new firmware are not properly loaded.
Ignore it because you are after all not flashing a whole new firmware but simply recovery in your phone.
Best if luck.
Click to expand...
Click to collapse
I have already been into that link since even I thought that I'm having driver issues but my device is included under adb in device manager and when I tried to update the drivers, it said that the best drivers are already installed.
I'm lost in a limbo, don't know what to do.

CM Punk said:
I have already been into that link since even I thought that I'm having driver issues but my device is included under adb in device manager and when I tried to update the drivers, it said that the best drivers are already installed.
I'm lost in a limbo, don't know what to do.
Click to expand...
Click to collapse
Did you tried to run as admin

icoolguy1995 said:
Did you tried to run as admin
Click to expand...
Click to collapse
Yes.

CM Punk said:
Yes.
Click to expand...
Click to collapse
Ok My last suggestion.
Remove all the connected device(dongles, bluetooth device) from your comp except your mobile with Usb debugging on.
restart your comp.
now place it in C drive(just for caution) or if it was on C drive move it to another drive.
Now try to root if it doesn't root.
Try frameroot.
---------- Post added at 03:54 PM ---------- Previous post was at 03:49 PM ----------
icoolguy1995 said:
Ok My last suggestion.
Remove all the connected device(dongles, bluetooth device) from your comp except your mobile with Usb debugging on.
restart your comp.
now place it in C drive(just for caution) or if it was on C drive move it to another drive.
Now try to root if it doesn't root.
Try frameroot.
Click to expand...
Click to collapse
Another suggestion if the above method does not work.
Try with a different port or with different cable.

Solved! Unlocking the Bootloader and Rooting Oppo A71 CPH1717 (MT6750)

Hi everyone I just found out a way recently on how to unlock the bootloader without losing data and root Oppo A71 Cph1717 ,but just in case please i encourage you to backup your phone before doing this, i tested this with my own phone and it works so now lets start!!!
1) download and install latest python (ensure to tick the checkbox Add Python x.x to PATH) ------>https://www.python.org/downloads/
2) download and install preloader driver -----> https://drive.google.com/file/d/0B9...dUE/view?resourcekey=0-TN-5Ipeegh7SowX4sduz_g
3) download the latest MTK-client zip --------> https://github.com/bkerler/mtkclient
4) unzip the mtk-client and open the CMD or Powersell inside the extracted MTK-client folder
5) enter the first command -----> python setup.py install ,and wait until the process is done
6) after the installation is done enter the second command ----> pip3 install -r requirements.txt ,wait until the process is done.
7) Now this is the part to where you are going to unlock the bootloader of your Oppo A71
8) enter command -----> python mtk da seccfg unlock it will wait for the phone to be connected
9) Now power off your phone, connect the small part of the usb cable in your phone, hold both up and down volume button and connect the another end of the usb cable to the computer and you will see the process starting after the process is done boot up your phone and the VIOLA!!! you have unlocked your bootloader without losing any data!!,when you see a warning ( your device has been unlocked and cannot be trusted , your device will boot in 5 seconds....) dont worry its very normal , Now lets hop in on how to root your oppo a71 .
Second Rooting your Oppo A71 CPH1717
1) download latest magisk apk and install it on your phone
2) download your stock rom in your PC -----> https://oppostockrom.com/oppo-a71-cph1717
3) and extract the stock rom in your pc
4) now go to developers option of your phone and enable usb debugging and select the type of connection and select MTP while connected in pc
5) copy the extracted boot.img in your internal storage
5) now open magisk app and select install (you can select Preserve AVB option if you want ) then select next and press the Select img and select the boot.img that you copied fron the PC and then press lets go option
6) wait until the patching is done
7) after the process is done, now copy the magisk_patched.img in the pc ( you can find it in your internals download folder)
8) now create a folder in your pc name it Root flash
9) move the magisk_patched.img in the folder that you created and rename it boot (no extension and other things )
10) copy the scatter file,preloader.bin from the extracted stock rom in to the folder that you created (root flash folder)
11) download sp flash tool ------>https://spflashtool.com/download/ ,and unzip it in your pc
12) open the sp flash folder and open flash tool.exe
13) now see scatter-loading file option and click choose go to the created folder( root flash folder) and select the scatter file
14) now untick the preloader but not the boot
15) click the download button , power off your phone ,connect the small part of the usb cable to your phone ,hold the up and down volume button then connect the another end of the usb to the Pc
16) wait until the flashing is done you will receive a green check in the screen ,disconnect your phone from the pc and turn your phone on and VIOLA!!!! your Oppo a71 CPH1717 is now rooted you can check the magisk app if its installed or install root checker
if i did something wrong pls feel free to tell me
PS: only follow this instruction that i created on how to unlock bootloader if your phone is Oppo A71 CPH1717 because if you follow another tutorial for unlocking the bootloader of this phone TRUST me it will going to be fu*ked up!!!!
BTW if you didn't enable the (Allow OEM unlock, but to be sure please enable it) option don't worry its ok trust me ,you can see it too in my screenshot.
you can refer to the screenshots below from my phone for the evidence , i hope this helps others.
Credits to the tool Developer in github: https://github.com/bkerler

Want to try this, but i think its too risky i dont have backup phone. Btw thank you for this.

pullll said:
Want to try this, but i think its too risky i dont have backup phone. Btw thank you for this.
Click to expand...
Click to collapse
Your welcome, btw You can backup just your data because if something went wrong you can redownload the stockrom in the oppo website for free

Anonymous V said:
Your welcome, btw You can backup just your data because if something went wrong you can redownload the stockrom in the oppo website for free
Click to expand...
Click to collapse
Hello sir, what do you think about this tutorial? Do you think this is legit?

pullll said:
Hello sir, what do you think about this tutorial? Do you think this is legit?
Click to expand...
Click to collapse
as i can see in the video its legit he really unlocked,root and install twrp(which i have it too) in the oppo phone but the only thing thats difficult is he uses a test point and to do that you need to open the phone and some tools to do that which is hasle and hard while in my method i directly unlock it you can see in the vid he uses something to activate the test point but in my case i didnt, i just connect my phone and enter the commands and let the tool do the magic we both use the same tool but the only difference is he uses gui version and im using only command prompt version both version of tool is good but for me command prompt version is stable

Anonymous V said:
as i can see in the video its legit he really unlocked,root and install twrp(which i have it too) in the oppo phone but the only thing thats difficult is he uses a test point and to do that you need to open the phone and some tools to do that which is hasle and hard while in my method i directly unlock it you can see in the vid he uses something to activate the test point but in my case i didnt, i just connect my phone and enter the commands and let the tool do the magic we both use the same tool but the only difference is he uses gui version and im using only command prompt version both version of tool is good but for me command prompt version is stable
Click to expand...
Click to collapse
i will follow your tutorial and i'll update here if it's successful. Thanks!

UPDATE: Bootloader successfully unlocked! I will proceed with rooting the phone.

UPDATE: I successfully root the phone. Thank you so much for this tutorial, been waiting for this.

pullll said:
UPDATE: I successfully root the phone. Thank you so much for this tutorial, been waiting for this.
View attachment 5810051
Click to expand...
Click to collapse
wow thats nice congrats on unlocking your bootloader and rooting your phone without losing data glad to help you

Anonymous V said:
wow thats nice congrats on unlocking your bootloader and rooting your phone without losing data glad to help you
Click to expand...
Click to collapse
there's one problem . hmm not actually a problem but there's a red banner on status bar saying "rooting has been detected".

pullll said:
there's one problem . hmm not actually a problem but there's a red banner on status bar saying "rooting has been detected".
Click to expand...
Click to collapse
thats kinda normal ,well yeah im facing the same problem right now but apparently there is no way we can remove that thing i searched every where but no luck but there is a method to remove that but the requirment that it needs doesnt met by our phone, this method needs Edxposed with we cant use because we need our phone to run in android 8/8.1 or higher i tried it with xposed framework but no luck i cant open the app because its not meant for the phone for now im thinking to to build a custom rom to fix this problem i dont know if this is possible but i found something in internet that got my attention im thinking to build (Resurrection remix 7 android 9) because it has a source code but it might take a while because im still studying it for now my twrp is on stanby for flashing and trying any rom that would fit for my phone

Anonymous V said:
thats kinda normal ,well yeah im facing the same problem right now but apparently there is no way we can remove that thing i searched every where but no luck but there is a method to remove that but the requirment that it needs doesnt met by our phone, this method needs Edxposed with we cant use because we need our phone to run in android 8/8.1 or higher i tried it with xposed framework but no luck i cant open the app because its not meant for the phone for now im thinking to to build a custom rom to fix this problem i dont know if this is possible but i found something in internet that got my attention im thinking to build (Resurrection remix 7 android 9) because it has a source code but it might take a while because im still studying it for now my twrp is on stanby for flashing and trying any rom that would fit for my phone
Click to expand...
Click to collapse
hello sir, i know this is out of the topic, just want to ask if you have a working solution to fix null imei after flash?

pullll said:
hello sir, i know this is out of the topic, just want to ask if you have a working solution to fix null imei after flash?
Click to expand...
Click to collapse
can i fix it using a root tool?

pullll said:
hello sir, i know this is out of the topic, just want to ask if you have a working solution to fix null imei after flash?
Click to expand...
Click to collapse
does your baseband isnt working too? if only your imei you can fix it using modem meta or sn write tool i have the same problem null imei here you can try this tutorial
_---------> https://www.hovatek.com/forum/thread-11609.html

Anonymous V said:
does your baseband isnt working too? if only your imei you can fix it using modem meta or sn write tool i have the same problem null imei here you can try this tutorial
_---------> https://www.hovatek.com/forum/thread-11609.html
Click to expand...
Click to collapse
the baseband also unknown.

pullll said:
the baseband also unknown.
Click to expand...
Click to collapse
you can fix the unknown baseband easily using Zarchiver grant root access then go to ROOT/data/nvdata then delete all the files inside it then after reboot them check if it work because it works fine in me while in the case of the null imei you can only fix it using tools like SN writer or Modem meta

Anonymous V said:
you can fix the unknown baseband easily using Zarchiver grant root access then go to ROOT/data/nvdata then delete all the files inside it then after reboot them check if it work because it works fine in me while in the case of the null imei you can only fix it using tools like SN writer or Modem meta
Click to expand...
Click to collapse
will try this. thanks!

pullll said:
will try this. thanks!
Click to expand...
Click to collapse
ok

Anonymous V said:
you can fix the unknown baseband easily using Zarchiver grant root access then go to ROOT/data/nvdata then delete all the files inside it then after reboot them check if it work because it works fine in me while in the case of the null imei you can only fix it using tools like SN writer or Modem meta
Click to expand...
Click to collapse
is nvdata is a folder ? can't find it.

pullll said:
is nvdata is a folder ? can't find it.
Click to expand...
Click to collapse
yes its a folder justv go to root/data/nvdata then go inside it then delete all files inside it