WELL WITHOUT WASTING MUCH OF THE TIME IN RAMBLING LET US SIMPLY START THE TUTORIAL:HOW TO ROOT CANVAS 2 RUNNING ON / WITH ICS......WHICH IS AS SIMPLE AS PLAYING SNAKE AND LADDER.
ROOTING.....
first of all enable USB DEBUGGING in your phone.
now connect your phone to your pc.
slide down the notification bar and select'touch for other options'.
now select MEDIA DEVICE option from that menu.
THEN DOWNLOAD bin4ry rooting tool from here..
extract it to any folder and open that folder.
now open runme.bat file from there.
it looks like a green coloured command prompt.
now just press 1 and hit enter.
then it will take about 1-2 mins as it is coping files to your phone.
(during this process your phone may reboot several times.)
THEN AFTER SOME TIME YOU WILL SEE THAT YOUR PHONES SCREEN HAS LIT UP.
IT WILL ASK YOU TO ENTER ENCRYPTION PASSWORD AND THEN FULL RESTORE YOUR PHONE.
IF YOU HAVEN'T SET UP ANY ENCRYPTION PASSWORD THEN JUST SELECT FULL RESTORE.
then after completing the process it will say press any key to continue.
now close this tool and switch on your phone.
you will find an app named superuser in your phone phone.
INSTALLING CLOCKWORK RECOVERY.
DOWNLOAD CLOCKWORK MOD RECOVERY FROM HERE.
put that downloaded recovery file (image) in the root of your sd card i.e. outside any folders otherwise mobile uncle tools won't detect it.
install an app named mobile uncle tools. YOU CAN DOWNLOAD IT FROM HERE.
open it and select recovery update option.
it will look for recovery file in your phone and display the result.
from there click on the recovery file and then select yes.
this will flash clockwork recovery in your phone.
And with dis u r done wid al d procedure..
Cill out
Hit thanx if i helped
Link of bin4ry rooting tool- www.mediafire.com/?wadbxnnxa8kf4b4
Hit thx if i helped
Link of cwm recovery (already renamed to recovery.img)
www.mediafire.com/download/ued9c4iqn6cr086/recovery.img
Good one.
Thx...:thumbup:
Please help..
Hello Jatin, I have followed all the above steps carefully but still I'm unable to root my device. Please refer the following screenshots and help me as early as possible. Thanks in advance.
CM Punk said:
Hello Jatin, I have followed all the above steps carefully but still I'm unable to root my device. Please refer the following screenshots and help me as early as possible. Thanks in advance.
Click to expand...
Click to collapse
First thing that please do not quote the whole post especially the main one....as it simply makes the thread ugly.
when you ask any question in a particular thread it is obvious that you will be asking question related to that only...:cyclops:
AND REGARDING THE ERROR.....IT LOOKS AS THERE ARE MORE THAN ONE EMULATORS RUNNING AND IT IS GIVING ERROR BECAUSE OF IT.
DISCONNECT ALL OTHER REMOVABLE DEVICES CONNECTED WITH YOUR PC...
HAVE YOU FOLLOWED ALL THE STEPS AS DESCRIBED IN THE THREAD? AND DOWNLOADED ALL THE FILES FROM THIS THREAD ONLY??IF NOT SIMPLY DOWNLOAD THEM FROM HERE AND PLS FOLLOW ALL THE STEPS STRICTLY AS GIVEN IN THE POST..
TRY AND REPORT.
BEST OF LUCK.:good:
[email protected] said:
First thing that please do not quote the whole post especially the main one....as it simply makes the thread ugly.
when you ask any question in a particular thread it is obvious that you will be asking question related to that only...:cyclops:
AND REGARDING THE ERROR.....IT LOOKS AS THERE ARE MORE THAN ONE EMULATORS RUNNING AND IT IS GIVING ERROR BECAUSE OF IT.
DISCONNECT ALL OTHER REMOVABLE DEVICES CONNECTED WITH YOUR PC...
HAVE YOU FOLLOWED ALL THE STEPS AS DESCRIBED IN THE THREAD? AND DOWNLOADED ALL THE FILES FROM THIS THREAD ONLY??IF NOT SIMPLY DOWNLOAD THEM FROM HERE AND PLS FOLLOW ALL THE STEPS STRICTLY AS GIVEN IN THE POST..
TRY AND REPORT.
BEST OF LUCK.:good:
Click to expand...
Click to collapse
Thanks for the quick response.
What does more than one emulator means?
I don't have any other removable device connected to my pc, and yes, I downloaded all the files from this thread only. What else can I do? Where am I missing out?
CM Punk said:
Thanks for the quick response.
What does more than one emulator means?
I don't have any other removable device connected to my pc, and yes, I downloaded all the files from this thread only. What else can I do? Where am I missing out?
Click to expand...
Click to collapse
Emulator is a hardware or software used for duplication of behavior of main system to host system.
In short your pc is main system here and device is emulated system.
I think you should than turn on usb debugging and set device as media storage and try.
IF YOU ARE STILL UNABLE TO ROOT THEN TELL ME AND I HAVE ANOTHER METHOD FOR YOU.:beer: cheers.
[email protected] said:
Emulator is a hardware or software used for duplication of behavior of main system to host system.
In short your pc is main system here and device is emulated system.
I think you should than turn on usb debugging and set device as media storage and try.
IF YOU ARE STILL UNABLE TO ROOT THEN TELL ME AND I HAVE ANOTHER METHOD FOR YOU.:beer: cheers.
Click to expand...
Click to collapse
I was trying with usb debugging all the way through with media storage as default but still no success. What's the other method?
CM Punk said:
I was trying with usb debugging all the way through with media storage as default but still no success. What's the other method?
Click to expand...
Click to collapse
No just on usb debugging
And are you trying to run it as administrator?
Sent from my C1604 using XDA Premium 4 mobile app
icoolguy1995 said:
No just on usb debugging
And are you trying to run it as administrator?
Sent from my C1604 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope. I'm doing exactly as mentioned above.I even tried it on another os of windows 7 and another laptop too, but to no avail.
CM Punk said:
Nope. I'm doing exactly as mentioned above.I even tried it on another os of windows 7 and another laptop too, but to no avail.
Click to expand...
Click to collapse
So here comes the second method.
FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools
link: http://db.tt/3JhQmUWh
Password of sp flash [email protected]
2.recovery image
link: www.mediafire.com/download/2j9rlu41ksnz83z/recovery.zip
3.superuser binaries
link: download.chainfire.eu/310/SuperSU-v1.04.zip
Extract sp flash tools and recovery.zip to get recovery.img( .img is the file type)
open sp flash tools(run as administrator)
.
click on scatter loading option and browse for the file in that folder
where you have extracted flash tools.you will find a text file...select it.
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RECOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
close sp flash tools and disconnect ur fone from ur pc and put the battery back.
WITH THIS U HAVE FLASHED CLOCKWORK RECOVERY ON YOUR CANVAS 2.
place the superuser.zip file in your phone's sd card(prefferably internal)
but do not extract it.
now BOOT INTO CLOCKWORK RECOVERY MODE by holding power key+vol.up key+vol.down key.
select install zip from sd card
then choose zip from internal sd card(if you have placed it in internal sd or otherwise select choose zip from sd card)
select the above placed zip and flash it.....
go back and reboot system
AFTER REBOOTING YOU WILL FIND A SUPERUSER APP IN YOUR PHONE
THIS MEANS THAT YOUR PHONE HAS BEEN ROOTED
Hit thx...it wont cost u
[email protected] said:
So here comes the second method.
FIRST DOWNLOAD THE FOLLOWING FILES:
1.Sp flash tools
link: http://db.tt/3JhQmUWh
Password of sp flash [email protected]
2.recovery image
link: www.mediafire.com/download/2j9rlu41ksnz83z/recovery.zip
3.superuser binaries
link: download.chainfire.eu/310/SuperSU-v1.04.zip
Extract sp flash tools and recovery.zip to get recovery.img( .img is the file type)
open sp flash tools(run as administrator)
.
click on scatter loading option and browse for the file in that folder
where you have extracted flash tools.you will find a text file...select it.
now a list of files will be shown in the flash tools
check RECOVERY file
now select RECOVERY FILE by single clicking on it
browse for the location where u have placed the downloaded recovery image and select the extracted recovery image.
NOTE-IF YOU FIND ALL THE FILES INCLUDING RECOVERY FILE ALSO SELECTED THEN MAKE SURE TO DESELECT ALL EXCEPT RECOVERY.
NOW SWITCH OFF YOUR PHONE AND REMOVE THE BATTERY
now click on download option in flash tools.....
connect your phone in 'BATTERY REMOVED' state
wait till the process completes....
after the process has been completed it will show DOWNLOAD OK
close sp flash tools and disconnect ur fone from ur pc and put the battery back.
WITH THIS U HAVE FLASHED CLOCKWORK RECOVERY ON YOUR CANVAS 2.
place the superuser.zip file in your phone's sd card(prefferably internal)
but do not extract it.
now BOOT INTO CLOCKWORK RECOVERY MODE by holding power key+vol.up key+vol.down key.
select install zip from sd card
then choose zip from internal sd card(if you have placed it in internal sd or otherwise select choose zip from sd card)
select the above placed zip and flash it.....
go back and reboot system
AFTER REBOOTING YOU WILL FIND A SUPERUSER APP IN YOUR PHONE
THIS MEANS THAT YOUR PHONE HAS BEEN ROOTED
Hit thx...it wont cost u
Click to expand...
Click to collapse
I'm stuck at the point where I'm supposed to click the download option in the flash tool coz nothing is happening after that. A dialogue box pops up which reads "Not all images are correctly loaded which may cause boot up issue! Do you still want to go on downloading anyway?" And when I'm clicking on Yes, the download progress is remaining unmoved at 0%. plz help. Screenshot included.
EDIT : Looks like this method is for jellybean. I'm using stock ics.
I prefer you use binary4u method i think you are getting these error because when you were rooting a another device was connected or try to as admin
Sent from my C1604 using XDA Premium 4 mobile app
icoolguy1995 said:
I prefer you use binary4u method i think you are getting these error because when you were rooting a another device was connected or try to as admin
Sent from my C1604 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ya i also thought that this could be the reason but he told me that only one device is connected...that why i asked him to follow the method of rooting jellybean because it also works on ics.
CM Punk said:
I'm stuck at the point where I'm supposed to click the download option in the flash tool coz nothing is happening after that. A dialogue box pops up which reads "Not all images are correctly loaded which may cause boot up issue! Do you still want to go on downloading anyway?" And when I'm clicking on Yes, the download progress is remaining unmoved at 0%. plz help. Screenshot included.
EDIT : Looks like this method is for jellybean. I'm using stock ics.
Click to expand...
Click to collapse
YOUR PROBLEM IS SIMPLY THIS THAT PRE- LOADER DRIVERS FOR YOUR PHONE ARE NOT PROPERLY INSTALLED IN YOUR PC. That's why sp flash tools is unable to connect to your phone and flash recovery.and so there is no progress.
TO INSTALL PROPER DRIVERS GO TO THIS THREAD.
Link: http://forum.xda-developers.com/showthread.php?t=2370906
And i know that the method i suggested is to root jellybean but it works fine on ics also ( but you cannot root jellybean via ics method)
**After installing proper drivers try again the above mentioned method and it should work.
And regarding that message... it will always come because all the images required to flash a new firmware are not properly loaded.
Ignore it because you are after all not flashing a whole new firmware but simply recovery in your phone.
Best if luck.
[email protected] said:
YOUR PROBLEM IS SIMPLY THIS THAT PRE- LOADER DRIVERS FOR YOUR PHONE ARE NOT PROPERLY INSTALLED IN YOUR PC. That's why sp flash tools is unable to connect to your phone and flash recovery.and so there is no progress.
TO INSTALL PROPER DRIVERS GO TO THIS THREAD.
Link: http://forum.xda-developers.com/showthread.php?t=2370906
And i know that the method i suggested is to root jellybean but it works fine on ics also ( but you cannot root jellybean via ics method)
**After installing proper drivers try again the above mentioned method and it should work.
And regarding that message... it will always come because all the images required to flash a new firmware are not properly loaded.
Ignore it because you are after all not flashing a whole new firmware but simply recovery in your phone.
Best if luck.
Click to expand...
Click to collapse
I have already been into that link since even I thought that I'm having driver issues but my device is included under adb in device manager and when I tried to update the drivers, it said that the best drivers are already installed.
I'm lost in a limbo, don't know what to do.
CM Punk said:
I have already been into that link since even I thought that I'm having driver issues but my device is included under adb in device manager and when I tried to update the drivers, it said that the best drivers are already installed.
I'm lost in a limbo, don't know what to do.
Click to expand...
Click to collapse
Did you tried to run as admin
icoolguy1995 said:
Did you tried to run as admin
Click to expand...
Click to collapse
Yes.
CM Punk said:
Yes.
Click to expand...
Click to collapse
Ok My last suggestion.
Remove all the connected device(dongles, bluetooth device) from your comp except your mobile with Usb debugging on.
restart your comp.
now place it in C drive(just for caution) or if it was on C drive move it to another drive.
Now try to root if it doesn't root.
Try frameroot.
---------- Post added at 03:54 PM ---------- Previous post was at 03:49 PM ----------
icoolguy1995 said:
Ok My last suggestion.
Remove all the connected device(dongles, bluetooth device) from your comp except your mobile with Usb debugging on.
restart your comp.
now place it in C drive(just for caution) or if it was on C drive move it to another drive.
Now try to root if it doesn't root.
Try frameroot.
Click to expand...
Click to collapse
Another suggestion if the above method does not work.
Try with a different port or with different cable.
HOW TO ROOT
#easy as 1,2,3
1.DL the files attachedL: internet connection is a MUST
2.install and open this=======> https://copy.com/Qi0M4YqJbhLF1Yz9/RO...apk?download=1
3. click root and wait to finished,
4. install SUPERSU from PLAY store and install binary..
5. reboot your device,
thats it.
OPTIONAL:
DL link2sd or any apps to freeze the UNICORN logo of superuser (Chinese character)
you can uninstall it if you want.
HOW TO INSTALL CWM
100% accurate.....and usable
1.DL mtk driodtool======>http://dfiles.ru/files/ne1gnposp
2.install busybox=======>https://play.google.com/store/apps/d....busybox&hl=en
3.Connect your switched on rooted mtk device to your computer and open MTKDroid tool, the tool will recognize your device and connect. click on the root button at the bottom, and wait for the progress bar, When the indicator turns to green you have root shell which is necessary for this operation.
4.Next click on the tab 'root,backup,recovery' and select boot.img 'to use boot from phone' then click on 'recovery and boot' and shortly after a dialogue box will appear asking if you want to 'make cwm recovery automatically' click yes
5.The tool will then create the recovery and another dialogue box will appear asking to 'install created recovery to phone', click yes.
6.And finally the tool will ask to reboot into recovery mode, click yes and the device will reboot into CWM recovery so you can check the installation was successful.
files:
https://drive.google.com/folderview?id=0B4ZzQHqR52s8TXNZUWozSEhTdFE&usp=sharing
FYI
CMW is fully working i tested it myself,,
make backup and restored run smoothly,,
suorce:http://forum.xda-developers.com/showthread.php?t=2160490 <======a BIG credit to him"
This URL not work:
https://copy.com/Qi0M4YqJbhLF1Yz9/RO...apk?download=1
kimerika said:
HOW TO ROOT
#easy as 1,2,3
1.DL the files attachedL: internet connection is a MUST
2.install and open this=======> https://copy.com/Qi0M4YqJbhLF1Yz9/RO...apk?download=1
3. click root and wait to finished,
4. install SUPERSU from PLAY store and install binary..
5. reboot your device,
thats it.
OPTIONAL:
DL link2sd or any apps to freeze the UNICORN logo of superuser (Chinese character)
you can uninstall it if you want.
HOW TO INSTALL CWM
100% accurate.....and usable
1.DL mtk driodtool======>http://dfiles.ru/files/ne1gnposp
2.install busybox=======>https://play.google.com/store/apps/d....busybox&hl=en
3.Connect your switched on rooted mtk device to your computer and open MTKDroid tool, the tool will recognize your device and connect. click on the root button at the bottom, and wait for the progress bar, When the indicator turns to green you have root shell which is necessary for this operation.
4.Next click on the tab 'root,backup,recovery' and select boot.img 'to use boot from phone' then click on 'recovery and boot' and shortly after a dialogue box will appear asking if you want to 'make cwm recovery automatically' click yes
5.The tool will then create the recovery and another dialogue box will appear asking to 'install created recovery to phone', click yes.
6.And finally the tool will ask to reboot into recovery mode, click yes and the device will reboot into CWM recovery so you can check the installation was successful.
files (BOOT.img) are link from google drive here=====>https://drive.google.com/file/d/0B4Z...it?usp=sharing
scatter file MT6582========================>https://drive.google.com/file/d/0B4Z...it?usp=sharing <====just in case
you needed.
FYI
CMW is fully working i tested it myself,,
make backup and restored run smoothly,,
suorce:http://forum.xda-developers.com/showthread.php?t=2160490 <======a BIG credit to him"
Click to expand...
Click to collapse
svetli said:
This URL not work:
https://copy.com/Qi0M4YqJbhLF1Yz9/RO...apk?download=1
Click to expand...
Click to collapse
see attached root master 1.0.2.apk
kimerika said:
see attached root master 1.0.2.apk
Click to expand...
Click to collapse
Thanks, I get it.
But my mobile is 5038X with 4.4.2 and this Root software not support it.
Any help how to Root this 5038X ?
svetli said:
Thanks, I get it.
But my mobile is 5038X with 4.4.2 and this Root software not support it.
Any help how to Root this 5038X ?
Click to expand...
Click to collapse
it needs internet connection,,
Backup
kimerika said:
HOW TO ROOT
#easy as 1,2,3
1.DL the files attachedL: internet connection is a MUST
2.install and open this=======> https://copy.com/Qi0M4YqJbhLF1Yz9/RO...apk?download=1
3. click root and wait to finished,
4. install SUPERSU from PLAY store and install binary..
5. reboot your device,
thats it.
OPTIONAL:
DL link2sd or any apps to freeze the UNICORN logo of superuser (Chinese character)
you can uninstall it if you want.
HOW TO INSTALL CWM
100% accurate.....and usable
1.DL mtk driodtool======>http://dfiles.ru/files/ne1gnposp
2.install busybox=======>https://play.google.com/store/apps/d....busybox&hl=en
3.Connect your switched on rooted mtk device to your computer and open MTKDroid tool, the tool will recognize your device and connect. click on the root button at the bottom, and wait for the progress bar, When the indicator turns to green you have root shell which is necessary for this operation.
4.Next click on the tab 'root,backup,recovery' and select boot.img 'to use boot from phone' then click on 'recovery and boot' and shortly after a dialogue box will appear asking if you want to 'make cwm recovery automatically' click yes
5.The tool will then create the recovery and another dialogue box will appear asking to 'install created recovery to phone', click yes.
6.And finally the tool will ask to reboot into recovery mode, click yes and the device will reboot into CWM recovery so you can check the installation was successful.
files:
https://drive.google.com/folderview?id=0B4ZzQHqR52s8TXNZUWozSEhTdFE&usp=sharing
FYI
CMW is fully working i tested it myself,,
make backup and restored run smoothly,,
suorce:http://forum.xda-developers.com/showthread.php?t=2160490 <======a BIG credit to him"
Click to expand...
Click to collapse
Could yo make a backup with mtk droid tools and upload.
Please
silver_619 said:
Could yo make a backup with mtk droid tools and upload.
Please
Click to expand...
Click to collapse
sorry bro but we are in he same page,, i got my phone brick, as in hard brick,,
it did not turns on anymore only PC can detect,, and i am searching the stock firmware entirely,,
or maybe you can help,, i have indeed a MTK back up, but for my stupidity i did not backup my userdata and cache,,
can u gave me you user data and backup,, you can do that using MTK,,i hope you are not new on this,,
anyway here is you asking for this is not mine,someonegave it to me,,https://drive.google.com/open?id=0B-jchL6X8w2vdzdKVTBUSEJ2MUE&authuser=0
Mobile upgrade
kimerika said:
sorry bro but we are in he same page,, i got my phone brick, as in hard brick,,
it did not turns on anymore only PC can detect,, and i am searching the stock firmware entirely,,
or maybe you can help,, i have indeed a MTK back up, but for my stupidity i did not backup my userdata and cache,,
can u gave me you user data and backup,, you can do that using MTK,,i hope you are not new on this,,
anyway here is you asking for this is not mine,someonegave it to me,,https://drive.google.com/open?id=0B-jchL6X8w2vdzdKVTBUSEJ2MUE&authuser=0
Click to expand...
Click to collapse
You can download this http://www.alcatelonetouch.com/glob...n/POP_D5/otu/mobile-upgrade-s-4-2-0-setup.rar this is a program by alcatel that allows to format the D5 Automactli but it takes about 4 - 5 hours to do the job. I hope this hel you.
silver_619 said:
You can download this http://www.alcatelonetouch.com/glob...n/POP_D5/otu/mobile-upgrade-s-4-2-0-setup.rar this is a program by alcatel that allows to format the D5 Automactli but it takes about 4 - 5 hours to do the job. I hope this hel you.
Click to expand...
Click to collapse
thanks,, but it doesn't help,,it cant scan my phone,, the only way to restore my phone is to have userdata.mg and cache.img backup from spf tool or mtk..
i've try OT upgrade before but it doesnt work
kimerika said:
thanks,, but it doesn't help,,it cant scan my phone,, the only way to restore my phone is to have userdata.mg and cache.img backup from spf tool or mtk..
i've try OT upgrade before but it doesnt work
Click to expand...
Click to collapse
The userdata and cache are not important for unbrick your phone, the backup you give to me will help you, you must flash it with sp flash tool. But I think that you must try with mobile upgrade is the best way and there is an update to 4.2. Try with and without batery, with power+vol.
silver_619 said:
The userdata and cache are not important for unbrick your phone, the backup you give to me will help you, you must flash it with sp flash tool. But I think that you must try with mobile upgrade is the best way and there is an update to 4.2. Try with and without batery, with power+vol.
Click to expand...
Click to collapse
i got PMT error,, do you KNOW how to fix this,,
to be exact"error PMT for the rom it must be downloaded"
Same error
kimerika said:
i got PMT error,, do you KNOW how to fix this,,
to be exact"error PMT for the rom it must be downloaded"
Click to expand...
Click to collapse
I have had the same error in all the Alcatel´s that I have. For that reason I think the only solution is the mobile upgrade, try by all the possible ways. Or with spflashtool only flash the cwm and install a backup.
kimerika said:
i got PMT error,, do you KNOW how to fix this,,
to be exact"error PMT for the rom it must be downloaded"
Click to expand...
Click to collapse
My friend coul you give me the blocks maps info to make a stockrom zip to flash it via cwm.
You do that with the MTKdroidtools.
I need the mount point for custapack, data, cache and system.
silver_619 said:
My friend coul you give me the blocks maps info to make a stockrom zip to flash it via cwm.
You do that with the MTKdroidtools.
I need the mount point for custapack, data, cache and system.
Click to expand...
Click to collapse
bro,, my phone is brick,,i cant do that,,sorry
Stock Rom.zip
kimerika said:
bro,, my phone is brick,,i cant do that,,sorry
Click to expand...
Click to collapse
bro, if can entry into the recovery, you can try flash this https://mega.co.nz/#!jwwy2RiY!4Gg0Nvzbcf4kJqgW_uB-rX9_IVOf9VACZjOahd6fsXE
It´s the stock rom for alcatel D5. I don't know if it work, if yes tell me and if don't work Take a pick with the error.
silver_619 said:
bro, if can entry into the recovery, you can try flash this https://mega.co.nz/#!jwwy2RiY!4Gg0Nvzbcf4kJqgW_uB-rX9_IVOf9VACZjOahd6fsXE
It´s the stock rom for alcatel D5. I don't know if it work, if yes tell me and if don't work Take a pick with the error.
Click to expand...
Click to collapse
thanks for your help,,,but my D5 isn't boot,, i do have CWM backup myself,,
i hardbrick it, as in no power,,just detected by PC ,, i do system format using SPF tool and is not a good idea to do,, resulting dead phone,, the only way to revive it i think is firmware,,,
even one touch upgrade cant help me...so sad
can anyone give me backup for userdata and cache f
Root?
can u explaind me the firs step
DL the files attachedL: internet connection is a MUST
beacause i cant figure what i need to do
thks
uklool said:
can u explaind me the firs step
DL the files attachedL: internet connection is a MUST
beacause i cant figure what i need to do
thks
Click to expand...
Click to collapse
its means you need an internet connection in your phone to root your d5
well i cant
kimerika said:
its means you need an internet connection in your phone to root your d5
Click to expand...
Click to collapse
I tried with internet but stays like this
So there is a bargain chinese 4G phone called the 'InFocus M512'.
The problem with it is that it comes without Google Apps and also is not rooted (sometimes is). Also it does not have CWM Recovery.
So this quick tutorial shows you how to root, install CWM Recovery and install google apps on the M512.
I'm not responsible for any damage
Rooting:
Method 1
1.Go to settings>>Security>>Check Unknown Sources tap OK.
2.Download this file.
3.Install
4.Run and tap 'get root' or somthing like that.
5.Delete KingRoot and some chinese app, but DO NOT DELETE KingUser!
6.Done!
Method 2
Flash CWM Recovery using the 2nd method from this post. If you have rooted usign the first method use method 1 from that post.
Download UPDATE-SuperSU-x.xx.zip (i used 2.46)
Reboot into CWM.
Select Install zip>choose zip from /sdcard>select UPDATE-SuperSU-x.xx.zip, press power button
Reboot now
GApps
1.Download this zip file
2.Reboot into CWM.
3.Select Install zip>choose zip from /sdcard>select the file, press power button
4.Reboot now.
How to delete KingUser (only if you have SuperSU and it is working)
Download ES File explorer, enable root explorer, go to /system/app and delete KingUser.
So this is how to get root, cwm and gapps on the m512.
First Method no good for me
I put the kingroot file in the adb tools folder and used the install command. It wasn't clear from the above whether the phone needed to be in recovery or some other mode so I tried a few times, in recovery mode and again just connected as an mtp device in the normal way. Either way the result was the same, it said "Invalid APK File: KingRoot.......".
I will have a go at the CWM thing next.
I am still on the 103A ROM that the phone came to me with - I have been trying, on and off, without success to update and then root it , for months.
When trying to flash an update ROM it tells me that the update package has unexpected contents and the there is an error in the update file and then says "Status 7". You can read all about my lack of success on this forum under the threads M512 started by Galaxy Why.
I'm trying, I really am....
Let me start by saying thanks for making the effort to post what you know and so to help people like me, however.
I tried to follow the method 2 (as I don't have root) from your other post (the one linked to above with the words "the 2nd method from this post" but got stuck.
Your instructions in normal my comments in italics.
Method 2: (No root)
1.Connect your phone via USB to your PC. OK
2.Enable MTP. OK
3.Enable USB Debugging. Settings>Developer Options> tick USB Debugging. OK
4.On your computer, 2 drives will appear: One of them is a CD-Rom which contains all drivers. OK
5.Click on that CD-Rom and it will install all drivers. It doesn't, or it may do, but what it definately does is asks me to put a disc in the drive and tries to do some kind of dir_all in windows explorer - I would post a screenshot here but this page only allows URL's- and I'm not sure how to go about that.. but I think I've managed to upload a screenshot....
After waiting for 5 minutes or so to see if something would happen as the green progress bar ground to a halt but the busy circle continued I hit the cancel button on the "please insert a disc dialogue" and then ploughed on anyway ....
6.Plug phone in again. Now this had me confused, I assume you mean unplug AND THEN plug the phone in again.
7.Download the .ZIP file and extract it somewhere. Which/what zip file do you mean exactly?? I couldn't get past this.
8.Click on _install_cwm_6.0.5.1.cmd
9.Your phone will ask you something, just tick "always allow from this computer" and hit OK.
10.Your phone will reboot into DL Mode, then it will reboot again.
11.Recovery is installed.
It's late and I'm tiring so sorry if missed something obvious. Any advice?
androo235 said:
Let me start by saying thanks for making the effort to post what you know and so to help people like me, however.
I tried to follow the method 2 (as I don't have root) from your other post (the one linked to above with the words "the 2nd method from this post" but got stuck.
Click to expand...
Click to collapse
Looks like you don't have a adb driver
And... why do you want to root your phone? Installing CWM is not root required.
M512 comes with a unlocked bootloader, just boot into bootloader and you can flash anything you like.
I made a customized stock rom based on version 2280, bloatwares removed and Google Play framework included. (You can download the apps back from Play Store, if you needs those)
Now the phone has 2.09GB free spaces :victory:
If you were interested on it, I can upload it and give you a link.
PochiMak said:
Looks like you don't have a adb driver
And... why do you want to root your phone? Installing CWM is not root required.
M512 comes with a unlocked bootloader, just boot into bootloader and you can flash anything you like.
I made a customized stock rom based on version 2280, bloatwares removed and Google Play framework included. (You can download the apps back from Play Store, if you needs those)
Now the phone has 2.09GB free spaces :victory:
If you were interested on it, I can upload it and give you a link.
Click to expand...
Click to collapse
I am interested in the custom rom you made for this phone. There's so little info on this model.
Lorien_Silmaril said:
I am interested in the custom rom you made for this phone. There's so little info on this model.
Click to expand...
Click to collapse
https://copy.com/3IfoZUCTCna1wa3U
The calendar is not working, you can install Google calendar from Play Store.
PochiMak said:
https://copy.com/3IfoZUCTCna1wa3U
The calendar is not working, you can install Google calendar from Play Store.
Click to expand...
Click to collapse
How do I install this?
GalaxyWhy said:
How do I install this?
Click to expand...
Click to collapse
Flash this ROM by a "3rd party recovery" = CWM
I just wonder how many of you are still using this device?
PochiMak said:
I just wonder how many of you are still using this device?
Click to expand...
Click to collapse
Just me, I think.
Can you give another link to your ROM, please, the one you put days ago doesn't works.
Thank you.
it's works for me. thx~
P98-3G(A9H8)Fw1.04 CustomRomV1.0 by Spzjulien Supercowz on XDA
ROM :
P98-3G(A9H8)Fw1.04 CustomRomV1.0.zip
Emmc internal memory resized to 6GB + 7GB
(instead of 2Gb +11GB with 1Gb left internal memory.. lol !!)
updated to Fw1.04 OTA
removed all chinese apps
rooted with SuperSU-v2.52
added chrome
added es file explorer
added Nova launcher as primary launcher
+ various tweak like :
set to english lang
battery saving tweak
USB MTP as default
if you like my work if you like my work feel free to buy me a cofee, i will be very happy
Paypal donation link
How to :
please install vcom driver first ! (look in driver folder, and try MTk USB VCOM drivers First)
1)start 1.flash_tool.exe inside P98-3G(A9H8)Fw1.04 folder
20 clic scatter-loading and load MT6592_Android_scatter.txt
3) clic Download button then turn off your tablet, then turned off connect it to your Pc
if the vcom driver, are installed and working, flashing process will start
Vcom install/update problem :
http://thebroodle.com/microsoft/wind...rs-in-windows/
Do you have make video tutorial?
Can I use for P98 4G A8H9?
Krystyna said:
Do you have make video tutorial?
Click to expand...
Click to collapse
do you need help to install it ?
Confucio1986 said:
Can I use for P98 4G A8H9?
Click to expand...
Click to collapse
no i doubt
lost imei
Hi after i installed your ROM i lost imei on my tablet , can you please provide link for original ROM or some info about fixing imei issues.
I tried already mtk tools and mobile uncle and
I have correct imei number on the box .
when i use engineer console im getting at command is failed to send
Regards
TM
I'm on a A8h6 p98 4g.... Would love to try this... Wonder if anyone has feedback.... I See someone already asked the similar question,
Sent from my P98 4G八核(A8H6) using Tapatalk
Trojan
Had any one else had a warning about a Trojan hidden in device management 1.0
Have re flashed more than once trying to deal with chrome err_connection_refused problem, every time the Trojan is back, you have to use titanium to get rid of it.
Tablet is brick!
I have a P98 3G A9H8. I used the flash tool here to install the ROM using the "download" option & I got an error that the ROM is not there. I tried to start my tablet immediately & I could not.
Then I chose the "firmware update" option and it came back with a list of errors (3 errors). I tried to power up the tablet again- again fail- nothing happens at all. Not even attempt at rcovery.
In other words, by flashing this rom, my tablet is not BRICK.
Does anyone know of a way to unbrick it? I am thinking perhaps flashing a stock rom can resuscitate it? I googled but could not find its stock rom to download.
Any help will be appreciated.
This ROM is just crewed up!! So many different errors it is not funny. Don't ever touch this- it screwed up my tablet big time.