[Q] How Earphone Universal Remote Works In Android Device - Nexus 5 Q&A, Help & Troubleshooting

I just bough my Nexus 5 last week and I am now looking for an earphone. I just came across this earphone (AKG K323XS A Black Ultra Small In-Ear Headphones with Universal Remote) and it is a nice earphone which is within my budget and has a quite good rating. But I am quite concern with the compatibility with my N5. While it did specified in the website saying that it is "Works seemlessly with most Android devices." but I am not sure whether the so called "universal remote" can control volume, skip song, receive call, and activate Google Now for my N5.
So anybody know actually how's is this universal remote standard works in the mobile industry, specifically for Android?

Related

SONY Bluetooth Stereo Problems. Help please

I have recently purchase a SONY DR-BT20NX stereo wireless headset that is SUPPOSED to work as a hands free head set too. It's not behaving and wondered the following:
Does anyone run one of these and can advise?
Are there know problems with BT Stereo headsets on the Trinity that require tweeks?
It seems to be OK when playing music but when set as a hands free unit the phone will not ring, it will only sound in the earphones. It will not respond to an INCOMMING call only an outgoing one. NONE of the advance functions work when making or taking a call so I have to use the buttons on the PDA!
When used as a stereo headset it does seem to stop start and pause music ok from the button on the headset, and even skip to the next track. But as mentioned, NO functions work from the button on the BT headset when a using the phone, let alone the advance functions the thing is supposed to offer.
This is the second unit I've tried as I returned the first one to the supplier as I thought it was faulty as it was do too many stupid things.
Thoughts chaps...?
Sorry not much help with your specific model but I can report that the Trinity works well with the SonyEricsson HBH-DS970 both for audio and to manage phone calls. All buttons work properly.
Are you sure your model supports the Handsfree BT profile? I thought all phones and phone accessories were part of the SonyEricsson joint venture portfolio and Sony would not produce phone accessories under its own brand.
Read this, Sony BT20NX worked seamlessly (both A2DP and AVRCP) on Wizard :
http://forum.xda-developers.com/showthread.php?t=299954
@Anonimo
I did think the same way you are, until i see it myself on a store shelves... I really don't understand why either...
Anyway both DS970 and BT20NX have necklace design... or you may called it "gene"
MIZZO1628 said:
I have recently purchase a SONY DR-BT20NX stereo wireless headset that is SUPPOSED to work as a hands free head set too. It's not behaving and wondered the following:
*Sniped* ...
Thoughts chaps...?
Click to expand...
Click to collapse
I tried this in one of the stores and found that it was NOT working properly with my Trinity (WM6 Rom). It was skipping horribly. Gave up after 5mins of trying. The square design of the center piece makes it looks like it came from the 90s.
Anyway, I tried the http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02050 I-Clip Radio and it worked out of the box (Flawlessly). Even the Cyberion Voice commander (for handsfree dialing through wireless bluetooth) works beautifully. Bought it after 10mins of trying, used it for 5 days now ... no regrets! It comes with a 3.5mm audio socket so you can pair it to your favourite Sony EX headphone or the over priced Shure headphone. Sound quality is unbelievable. Try it ...
Just wondering if MIZZO1628 eventually got Trinity working with the Sony DR-BT20NX earphones? I really like the look of these, and am willing to do some reg hacking if necessary - but not if its going to be a dead end...
I also have the Sony BT headphones, and they have always been a problem with every rom (HTC Wizard included) that I have used.
I nearly always must edit the registry to listen to music, and the phone call function only works for outgoing calls.
I should have known better than to buy something with 'Sony' on it, but there was a recommendation elsewhere in this forum.

Which Bluetooth Car Head Unit

Looking at getting a new Head Unit that is able to do hands free calls and streaming from the HTC Desire, but also connect up an Ipod discretely (ideally through a rear usb port). I would much rather it had a wired remote microphone rather than one in the head unit itself.
So, what have found to work with the Desire. Any info greatly appreciated.
I am currently looking at the following units if anyone has one:
Kenwood KDC-BT60U
Pioneer DEH-P7100BT
Pioneer DEH-600BT
Sony MEX-BT5700U
JVC KD-R901
I use a Parrot Kit with my original headunit and it works great with the desire. I've got the Parrot MKi9100 which as well as bluetooth for calls supports bluetooth audio streaming, 3.5mm input, usb input (can connect phone, choose usb drive and play music from the phone) and also an iPod input too
I have bought the JVC KD-R901 and am pleased with it.
Pairing and streaming works seamlessly. You don't get track names but that is the phone's fault, not the HU as it doesn't support it. I mainly listen to audiobooks or podcasts anyway so its not much of an issue.
Getting the phone book across was a bit more of a pain though. It would not do the auto sync so I had to do the following.
Using GMail contacts on the PC I selected all and exported as a VCF file. This created a single file onto the computer. I transferred this via dropbox to the root of the SD card on the phone.
Next I installed BlueX (Bluetooth file share) app onto the phone. I put the JVC Stereo into manual phonepook transfer mode and then initiated the transfer.
On the phone I ran BlueX and selected the VCF file with a long press and selected send via bluetooth. The next screen showed the stereo as JVC Unit (unclassified) and once selected the phonebook transferred in a matter of seconds.
I can now seen the listing in the phone. The only downside is new entries will need to be done manually, but given the whole phonebook can be exported and uploaded in about 5 minutes I am not too worried about that.
Hopefully this may be of use to others.
I have the Alpine CDE-103BT.
The phonebook synced correctly and calls can be made and received fine (both when I had the stock UK T-Mobile ROM and now with the Modaco Froyo ROM). Only thing that still won't work properly is voice dialling.
It has a wired mic, and iPod support is through a cable on the back of the unit. It also has front USB and line-in sockets, though I've never used them for music as I always have my iPod with me.
Hope this helps!
Cheers,
Bryan.
If you are on a budget like I was and don't mind something that works well but doesn't offer much for features, the Sony BT2800 isn't a bad purchase. I got it at some electronics website for $135 with free shipping, mounting kit and wire harness. Phone calls sound good, the caller can hear me well, music streamed sounds good and it's easy to setup/use. Display doesn't show caller ID (at least not on my TP2 and Desire), and no phonebook support. Also, the desire does not support voice activation through it (my tp2 it worked great) so not having phone book support is inconvenient but this is the Desires fault, not the radios. Overall, it does what I need it to and it was not expensive. A good bluetooth headset sells for about the same at retail.
Pioneer DEH-600BT
I do car audio installs on the side of my actual job and most of the peoples are I install stuff, are happy that I told them to go with Pioneer, because of the sound quality and functionality for price. iv had people install Sony and other brands and pioneer is unmatched right below them to me is Alpine but personally i think the products are over priced
if you have any other questions feel free to PM me
I'm very happy with my Parrot MKi9100 as well.
Jvc is a pile of %%#% my avx44 which cost £400 broke just a month out of warranty and they refused to fix it.
pioneer definately. i use one with my desire via bluetooth for calls and music and has ipod wired up to glove box. downloads phonebook from phone and show ipod music the same way it is set up on ipod
jjkshaughnessy said:
pioneer definately. i use one with my desire via bluetooth for calls and music and has ipod wired up to glove box. downloads phonebook from phone and show ipod music the same way it is set up on ipod
Click to expand...
Click to collapse
Which unit did you get?
I've got a Kenwood BT-60U and it works quite nicely now.
Adressbook sync works, although there some strange entries in the HU and you can not choose a letter to begin you search with (well, you can but it always starts at A).
With 2.1 (or a Sense rom - I'm not sure if 2.2 or a AOSP rom made the difference) I always had connection losses.
I use it only to have a hands free car kit and for that purpose it works well enough - the sound quality is okay and its nicely integrated with e.g. USB playback (basically I can charge my Desire & listen to music from SD while having BT handsfree on )
Parrot Mki9000 here, its a deadly combination with upgradable software - unlike HUs.
Plus a wireless remote which I can mount anywhere and remove for security.
ThePanama said:
Which unit did you get?
Click to expand...
Click to collapse
mine was the older deh 500bt unit. also has 3 separate outputs so upgrading speaker equipment is a doddle.
On a budget?
Wharfedale ICS182
£49.99 from Argos, I got mine for £32 of ebay!
Bluetooth hands free, USB, SD Card, CD Player, its great and works brilliantly with the Desire, sound quality is great and better than the JVC unit I took out. Hands free works great and no one has a problem hearing me even if I talk low.
Just checked mine agin and realised i gave you the wrong model number mine is the pioneer deh p800bt. excellent bit of kit.
I have a Pioneer DEH-P75BT, but can not get it to connect my Desire automatically, can anyone help?
pnyg
pnyg said:
I have a Pioneer DEH-P75BT, but can not get it to connect my Desire automatically, can anyone help?
pnyg
Click to expand...
Click to collapse
if you used to have another phone connected disconnect it and clear the phone book memory. then go through the reconnection process. after this ensure that automatic connection is turned on on the head unit. turn car off and blutetooth on the phone on. then turn the car back on with the stereo. leave for a few seconds and the switch to the phone setting on stereo. if still not connected leave for about a minute to see if it works.
i had to try a few times but after it connected once automatically it worked perfectly. also you could try setting it all ready for the automatic connection and then making a call. i find this helps if music streaming doesnt connect. just hit play and then all of a sudden bluetooth kicks in.

Parrot MKi9000, or an alternative?

Ok - I've got the Desire, and I'm liking it.
I've also got Spotify, and it's excellent.
But Spotify in the car would be amazing.
So, question is, would the above kit be a useful purchase?
This particular Parrot comes in 3 flavours, the bog standrd MKi9000, but there's another two which also have a small screen accompaniement.
Question is, which should I get?
Or should I get something else entirely?
I like the idea of FM transmitters, but pretty much across the board, they are meant to perform poorly. I also don't like the idea of being restricted by having to instal some of them in the cigarette lighter - I'd rather the stero component was hard wired if possible (and easy to fit myself as I'm on a budget).
So, any advice peeps?
I have a parrot SK4000 and it's terrible.
I've got a Parrot Mki9200 and it's great. It's a Parrot device so you have to expect the occasional oddity but I just get in the car and I have bluetooth handsfree and A2DP streaming from my Desire. I'm even contemplating changing my earlier Parrot 3400GPS in another car.
Haven't tried it with Spotify but I can't see why it wouldn't work. Works fine with Google Maps Navigation, although occasionally the A2DP streaming takes a second to kick in which means you miss the very first part of the voice instruction.
Edited to add that you can plug the Desire into the USB connector which both charges it and allows you full onscreen browsing of the media on your Desire. Select songs by album, artist, playlist, folder, etc.
Ian A.
Thing is, do you need the small screen that comes with the 9200, if you only use it with a Desire? I mean, what exactly would you use the screen for, assuming you've already got your Desire on a dashboard mount anyway?
I'm clueless about in car bluetooth connectivity and suchlike, so any advice is great. You can get the mki9000 quite cheap if you look around, but with the screens, you add a fair bit to the cost.
So - any other advice?
I had a MKi9100 Parrot which had to be returned as it had a fault. However, i was really disppointed with the quality of the music, as it uses its own inbuilt amp, not the car stereo amp. Quality suffers as a result.
With the MKI9200, I believe that there is a way to wire the kit, so the music plays through the car stereo, but you then have to have a separate speaker for phone calls, else you won't hear calls when the stereo is off. A good source of info can be found at the Parrot forums.
The benefit of the Parrot gear is that you can integrate it with your stearing wheel controls (if fitted), although you will need the additional control module.
Given my rather unreliable experience of Parrot gear, I'm looking to ditch my present Parrot CK3000 unit in favour of the Bury cc9060 kit. Not only does this kit have A2DP (music via bluetooth) and the ability I believe to route music via the stereo (please check to confirm), but most impressively it has multipoint - the ability to connect 2 bluetooth phones at the same time. A real bonus for those of us with 2 mobiles....
Hope this helps.
Parrot
I have the LS3200 and there is a lot of problems with the Desire sync of contacts from phone
This is exactly the kind of info we need.
I hadn't even heard of Bury kits, so cheers for the heads up...
crazybones said:
With the MKI9200, I believe that there is a way to wire the kit, so the music plays through the car stereo, but you then have to have a separate speaker for phone calls, else you won't hear calls when the stereo is off. A good source of info can be found at the Parrot forums.
Click to expand...
Click to collapse
The Parrot instruction manual is wrong on this. If you have a decent car stereo, you can wire a line-out from the Parrot to the Line-In from the car stereo and use the car hi-fi amp for streaming music. You still connect the speaker bypass which kicks in if you get/make a voice call. I've confirmed this with Parrot tech support.
As for the screen, if you've got (or are getting) the Desire car dock and you only listen to music from the phone, I guess you don't need the screen. However I find that I use the SD card & USB connection to listen to music as well so the screen is pretty essential. The 9200 is only around £20 more than the 9100 so it was a no brainer for me.
However I did look at the Bury devices as well. I do expect the Bury ones are slightly more reliable (although the 9200 is better than expected) but I found them lacking in some features.
Ian A.
ray4438 said:
I have the LS3200 and there is a lot of problems with the Desire sync of contacts from phone
Click to expand...
Click to collapse
I've also got a 3400 (same thing but with GPS, not the most reliable of devices!) and the best way is to delete all contacts, re-pair the phone and then send a multi-contact VCF file to the Parrot. You can create a multi-contact VCF from MS Outlook if you have that.
I've managed to get multi-number contacts (so you can do voice dialling with "Call... Alex... Home"), contact pictures and all features working correctly with the Desire. It did take some fiddling though, especially compared to the 9200 which was pretty seemless.
Ian A.
Just got an MKi9200 and installed in my 2008 Civic. I am loving it so far!!
I have paired my Desire which I plan to use for calls and sat-nav using the bluetooth audio feature.
I also plugged in a 32Gb USB stick which I will be using for playing music.
All this works well so far, except for a few little niggles.... I am hoping someone can help
1. When the phone sync's with the Parrot I get a message "File format not supported" which appears, disappears and appears again during the sync. Its possibly contact related (either pictures or the contact themselves) - can anyone advise??
2. When the sat nav (Copilot) gives directions, the sound comes out of the Desire AND the cars speakers. This is fine but the phone sounds up first, then after a 1/2 second delay the same instruction comes through the cars speakers. Any ideas on how to get them to play at the same time or mute the phones instruction but still hear the car speakers?
Any help gratefully received!
Thanks
zippyioa
I use the venturi mini on mine and it works flawlessly the only problem is it does plug into the lighter socket, I did end up buying a 3 way extension plug for the socket though off ebay so it is now mounted elsewhere and i still have 2 spare lighter sockets and a usb charging port on it as well as on the bluetooth car kit.
the kit was about £20 off of ebay of £50 in the shops, phonebook dl all ok even transmits it on the head unit if it has RDS on it.
ray4438 said:
I have the LS3200 and there is a lot of problems with the Desire sync of contacts from phone
Click to expand...
Click to collapse
I have the exact same model, had the exact same problems but cured it.
I wrote a post about my experiences http://forum.xda-developers.com/showthread.php?t=668042 , but I think the upshot is actually to break all the "links" in your contacts.
My LS3200 works flawlessly now.
advice please
I'd like to get Bluetooth handsfree set up with my Desire in my Toyota Rav4 (2005). Am looking at the following:
1. Brodit active cradle (hardwired to car, avoiding cigarette charger)
2. Parrot BT kit
So, my questions are: which Parrot kit am I best getting (dont want to spend a fortune, but would be nice to stream music from Desire through stereo speakers), & can anyone recommend a company to do the installation professionally in London? (as much as I'd love to do it all myself, probably not a good idea to open up the dashboard etc?)
Its a no brainer to go wth the MKi series, thebosh, but it depends if you want clutter on your dash or keep it clean and minimalistic.
But following the parrot forums loosely, its seems that more and more people are having difficulties with the 9100 and 9200 than the 9000 due to the added screens and with displaying what they wantr and how they want it, especially with software updates, changes to phonebook layouts and intergrations with social feeds etc.
For me, it had to be the 9000 with just the remote, which I mounted on a spring clip and then to a face vent.
I also got a brodit active charger (the one with the hardwired charging lead) for sat nav purposes, so I saw no need for an extra bluetooth screen you have to mount somewhere.
I too am planning to cut the cigar charger plug off and hardwire it, just need to get around to it.
The sound quality from the desire to the parrot 9000/9100/9200 BT is exceptional, and the music bass/treble is well balanced.
As for installation, register on the parrot forums and ask there.
You'll be surprised how many installers are registered for troubleshooting and can give you some sort of price/advice on whos doing it in that area.
I put mine into my 206, and its no sweat.
Thanks for the really helpful advice Touch Graphite. The 9000 seems perfect for my needs.
Had my first quote this week for professional installation - £244 for the lot. No idea if that's any good or not!
Will do as you suggest re. Parrot forum, as it would be awesome if I could do it all myself!
(For info, the quote came from avrmobiles.co.uk, & guy I spoke to warned me to rather go for the Bury 'Music' as he had experienced issues with Android & Parrot devices...)
Sent from my HTC Desire using XDA App
Zippy,
There are alot of bugs when it comes to the screened versions of the Mki series, hence my recommendation of the 9000.
I have no such problems with any sort of delay in sat nav commands, music quality or phone sync from my desire.
Only niggle I get is blipping when im canning the music at full chat from my desire on fuller vocal songs,
but using the Mix-zing app, and turning up the buffer size does help.
Keep It Simple.
IPAddis said:
The Parrot instruction manual is wrong on this. If you have a decent car stereo, you can wire a line-out from the Parrot to the Line-In from the car stereo and use the car hi-fi amp for streaming music. You still connect the speaker bypass which kicks in if you get/make a voice call. I've confirmed this with Parrot tech support.
Ian A.
Click to expand...
Click to collapse
Hi,
This is exactly the kind of solution I am looking for! I just got my MKI9000 installed and unfortunately the installer routed all 4 speaker output through the cutoff and not through the line-in.
I have a Skoda (part of the VAG family) and I am now trying to cross information so I can come back to the installer and get him to fix the installation (he will learn a thing or two from the infinite internet wisdom )
Any more information you can share on this option?
Moshe

Sony Ericsson MW600

Have anyone used that with i9000 ?
Does the caller ID works ? does it display the name from the phonebook ?
i do have it, but no support for caller-id or mp3 tag with the current bluetooth drivers...
I read somewhere that in order for a BT device to display full caller-id info (name of the caller etc) it is required that all that information (in other words the Contacts from your phone and/or SIM card) must be also resident in the BT device (headset, carkit, etc.) that is why very few such accessories do it. They just relay the number of the caller to their own screen (I suppose they get it in realtime when the incoming call rings).
Further on the topic of the MW600, since I was thinking of buying it myself, I read some user reviews from Amazon that made me change my mind:
1. It does not store radio stations. You must manually tune in to the station you want, each time.
2. Although it is multipoint, a user reported that when a call comes through, you must manually select the phone before answering (!).
3. The volume adjust is performed by a swype-type gesture (not buttons) and
this could be awkward.
Again, I don't have it, haven't tried it, just what others say about it.
Go on and buy it, for that price it's great
I have used the MW600 with my SGS for a couple of months now, and am very happy with it. It's a very nice and small device, and the sound quality is quite good. It works great as a hands-free despite the display limitations. I don't use the radio part, tested it a couple of times and it seems to work but isn't very comfortable.
The MW600 is great with music also but I mainly listen to audiobooks while walking/working in the garden/etc. When I want to really enjoy music I plug in my pair of Ultimate Ears 700 (straight to the phone naturally . I use a cheaper headset with the MW600.
The sound adjustment is a bit tricky at first but it works ok. The headset that ships with the MW600 is surprisingly good, but of course you can use any 3.5 mm plug headset with it.

Bluetooth delay and Google Assistant

Some BT headsets (typically in car built in systems) have 1-2 second delays from when audio is sent from phone to BT receiver to actual playback. This causes Google Assistant to turn on the mic to listen before the speech is completed. In some cases, the app would time out waiting for a response before the speech is done being read out. Typically when you use Google Assistant to dictate a text message to someone.
Anyone have ideas on how we can customize Google Assistant's wait timer to deal with this kind of delay? Preferably on a per BT device level.
Nobody owns a car and uses Google Assistant in it?
I have a Hyundai Ioniq w/ Android Auto and also have similar Bluetooth lag. I think this is an issue with the (most likely) poor quality BT that cars implement. I've always had several seconds of lag when using bluetooth in a car system. It's never been so bad that it will prematurely cancel voice requests, though.
AFAIK, I don't think there's a specific software option (officially) to account for this bluetooth lag. I'd think the only solution would be to get an ApTX Low Latency-certified bluetooth connector for your car? Might be worth a shot. The Pixel 3 supports it.
I found that it affects cars that uses BT implementation from Johnson controls - Hyundai, Mazda, Honda, Toyota, GM are those I know of at this point. Doesn't seem to impact newer iDrive 6 based BMWs since they have a passthrough button that triggers the assistant directly.
https://www.amazon.com/Kinivo-BTC450-Bluetooth-Hands-Free-Input/dp/B009NLTW60 Seems to work OK ish if you have an aux-in port. Delay is still there but manageable since it's just a slight delay. If you set the phone to not use BT to record audio, move the phone closer to the center away from speakers (assuming you don't have it on full blast loudness) it won't catch the last half a second of delayed audio.
Still not as good as the built in system like on the BMW or my friend's MB. Audi that comes with Android Auto support works beautifully.

Categories

Resources