[Q] Took OTA After Root And Can't Boot Into Recovery - Verizon Samsung Galaxy S III

Hey guys, so I had previously rooted my Galaxy S III (SCH-I535) but was running the standard Verizon-issued Android 4.3. I stupidly took the OTA to 4.4.3, thinking my root was safe because I attempted to use a root keeper. I lost root, and I also appear to have lost the ability to boot into recovery.
My phone otherwise works fine - I can use it as designed to my hearts content, and can also boot into download mode. However, when I try to boot into recovery (using Home + Volume Up + Power), I get the Samsung splash screen, with the words "Custom" and a broken/unlocked lock. The screen then goes black for about 30 seconds, it buzzes, and then reboots into a normal boot (starting over again at the aforementioned Samsung splash screen).
I attempted to push TWRP using Odin, but that fails:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(screenshot also attached)
The phone display read thusly:
ODIN MODE
PRODUCT NAME: SCH-I535
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE
BOOTLOADER AP SWREV: 2
SECURE CHECK FAIL : recovery (this last line appears after attempting to push TWRP)
Any thoughts on how to get some kind of recovery working? I appreciate any advice anyone can offer.

dubya3 said:
Hey guys, so I had previously rooted my Galaxy S III (SCH-I535) but was running the standard Verizon-issued Android 4.3. I stupidly took the OTA to 4.4.3, thinking my root was safe because I attempted to use a root keeper. I lost root, and I also appear to have lost the ability to boot into recovery.
My phone otherwise works fine - I can use it as designed to my hearts content, and can also boot into download mode. However, when I try to boot into recovery (using Home + Volume Up + Power), I get the Samsung splash screen, with the words "Custom" and a broken/unlocked lock. The screen then goes black for about 30 seconds, it buzzes, and then reboots into a normal boot (starting over again at the aforementioned Samsung splash screen).
I attempted to push TWRP using Odin, but that fails:
(screenshot also attached)
The phone display read thusly:
ODIN MODE
PRODUCT NAME: SCH-I535
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE
BOOTLOADER AP SWREV: 2
SECURE CHECK FAIL : recovery (this last line appears after attempting to push TWRP)
Any thoughts on how to get some kind of recovery working? I appreciate any advice anyone can offer.
Click to expand...
Click to collapse
Your now on a locked bootloader. You can't flash a custom recovery other than safestrap
Here you go http://forum.xda-developers.com/showthread.php?t=2797314
From what I've been reading the only legit way to keep root through otas is the option in supersu to attempt to keep root after an ota. There's no 100% guarantee but some people have reported it to work, and towelroot may be your only working option for root
From my S3 on Wicked 4.3

Related

[Q]How do i enter to Clockworkmod recovery?

hey guys i just finished to S-OFF my sensation but now after the revolutionary is done it it took me back to the white screen dat says S-OFF RL
thats means i am s-off right now?and if so how do i enter to clockworkmod recovery?
thanks!
If you already have CWM recovery installed on the phone, then it's a matter of hitting the right button(s) during boot.
In my case (SE x10 mini pro), during boot right after the SE logo, i need to hit my back key a number of times to open CWM recovery.
hitting the right button?are you talking about the volume + button?
for my phone specifically, it's the 'Back' button. Unsure about your specific model of phone and CWM installation.. but it may be worth experimenting and hitting different buttons during boot up to see if you can figure it out.
i tried to click on back button while boot nothing happends =/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
maybe i need to do something here?
someonewhy said:
i tried to click on back button while boot nothing happends =/
maybe i need to do something here?
Click to expand...
Click to collapse
Be sure you followed the steps to install clockwork recovery LINK
Be sure to look at this page link
If you already flashed the recovery click the power button where it says boot loader, click down on the bottom volume rocker, and then select recovery. It should boot into clockwork's recovery image and your good to go. Hope this was helpful.
Yup i needed to click on recovery to get clockworkmod thanks everyone!
someonewhy said:
Yup i needed to click on recovery to get clockworkmod thanks everyone!
Click to expand...
Click to collapse
Your welcome! Happy modding

Is my Transformer in stock state ?

Hi
I was using custom Roms But i want to come back to stock ROM for warranty purposes !!
I Used this method and used one of the 3.2 Roms
http://www.tabletroms.com/forums/tr...stock-3-2-recovery-roms-unbricking-tools.html
and i updated it for the last one from asus ( i mean through the tablet )
here is a picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOW
Is my Transformer in stock state ?
I am new in this subject, but I have been reading a lot.
If you followed the steps exactly, put back a stock ROM without SU package (from the picture I see you have a stock version number, 8.6.5.21, but It doesn't say about SU, look in Apps), and replaced the ClockWorkMod recovery with stock Asus recovery (green android with exclamation mark), then it should be back as stock.
Try to boot into recovery mode, as long as CWM is gone and android recovery is back you are indeed back to stock ROM there..
Edit: BTW if you updated through the ROM directly from Asus then you are stock, as you need a stock ROM and stock recovery to apply official OTA updates.
Cheers, and congrats on being stock again (??) lol
mcbyte_it said:
replaced the ClockWorkMod recovery with stock Asus recovery (green android with exclamation mark), then it should be back as stock.
Click to expand...
Click to collapse
So this is stock recovery. I failed to check out the stock recovery before I rooted and put CWR on there to make my initial back up (old habits that bled over from phone-my bad). Anyways, comparing to phone recoveries, there are usually 4 items listed in stock recovery. You know the standards, wipe, reset,...but does the tablet have that? I flashed the stock recovery package and when I rebooted, I hit the power + vol down and the up like CWR and it went to that screen with the ! and android with no options. I tried it again, only this time it gave me 2 options, Hot and Cold reboots (I know what those are).
So my question is if merely having the ! and andriod is in fact stock recovery. Getting used to separating phone from tablet but still learning and reading and reading and reading.
Thanks for all
just 2 points :
1- after i download the update and press install the tablet turned off !! when i turned it on the update completed successfully !! is it usual ????
2- i tried to enter the recovery through ( press power button & on asus logo press vol - then vol + and didn't enter the CWM recovery !! So am i on stock recovery now ??
Yes you are stock, also as luca_c666 pointed out, if you flashed a rom directly from Asus then you are stock because you can't flash those roms when you have a custom recovery.
Woodrube said:
So this is stock recovery. I failed to check out the stock recovery before I rooted and put CWR on there to make my initial back up (old habits that bled over from phone-my bad). Anyways, comparing to phone recoveries, there are usually 4 items listed in stock recovery. You know the standards, wipe, reset,...but does the tablet have that? I flashed the stock recovery package and when I rebooted, I hit the power + vol down and the up like CWR and it went to that screen with the ! and android with no options. I tried it again, only this time it gave me 2 options, Hot and Cold reboots (I know what those are).
So my question is if merely having the ! and andriod is in fact stock recovery. Getting used to separating phone from tablet but still learning and reading and reading and reading.
Click to expand...
Click to collapse
Yes that is stock recovery, it looks for Asus signed files on the external sd card, named either EP101_SDUPDATE.zip or RR_epad-user-x.x.x.xx.zip where RR = region stamp (US, TW, HK, DE, UK, WW, etc) and x.x.x.xx = firmware version. For example, when i wanted to circumvent the broken root i had to use file WW_epad-user-8.6.6.19.zip placed on my sd card, stock recovery will find this file and flash it..i believe OTA updates load into a cache folder in the system, so i guess if you don't have an external sd you could put the file there too, im sure it simply scans these locations in sequence until it finds an Asus signed file that will install.
Thank you everybody

[Q] Bricked or not??? have i hope???

Sorry for my bad english...i'm italian...
my problem is:
i've a TF700T with bootloader unlocked (with official asus tool)
with CWM i've make a total wipe (data, media, cache, etcc...)
while this operation the pad is shootdown...
...and now it start but block at the LOGO ASUS.
if i try to start with volumedown (recovery)...nothing...Always stay in logo asus and recovery not start.
if i try to start with volumeup (apx)...ok...this mode starts correctly.
how can i recovery my pad???
Can i re-install recovery-mode or recovery-bootloader using only APX mode???
Or can i re-install all firmware with APX mode???
:crying::crying:
please help me :fingers-crossed:
ferithon said:
Sorry for my bad english...I'm Italian...
My problem is:
I've a TF700T with bootloader unlocked (with official asus tool)
with CWM I've make a total wipe (data, media, cache, etc...)
while this operation the pad is shutdown...
...and now it start but block at the LOGO ASUS.
if i try to start with volume down (recovery)...nothing...Always stay in logo asus and recovery not start.
if i try to start with volume up (apx)...ok...this mode starts correctly.
how can i recovery my pad???
Can i re-install recovery-mode or recovery-boot loader using only APX mode???
Or can i re-install all firmware with APX mode???
:crying::crying:
please help me :fingers-crossed:
Click to expand...
Click to collapse
Sounds like no firmware or recovery installed installed my friend.
Do you see this screen at all?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also are you installing using ADB from a desktop PC to the TF700T using a USB connection?
Just trying to get a feel for where you are at.
Doesn't look like a brick you just wiped everything including your recovery.
I believe...
ferithon said:
Sorry for my bad english...i'm italian...
my problem is:
i've a TF700T with bootloader unlocked (with official asus tool)
with CWM i've make a total wipe (data, media, cache, etcc...)
while this operation the pad is shootdown...
...and now it start but block at the LOGO ASUS.
if i try to start with volumedown (recovery)...nothing...Always stay in logo asus and recovery not start.
if i try to start with volumeup (apx)...ok...this mode starts correctly.
how can i recovery my pad???
Can i re-install recovery-mode or recovery-bootloader using only APX mode???
Or can i re-install all firmware with APX mode???
:crying::crying:
please help me :fingers-crossed:
Click to expand...
Click to collapse
I'd reflash a custom recovery with fastboot and see if that starts up. When it does, put a ROM file on a microSD card or send it over with adb, and flash it. Then restart.

Bootlooping(can't acces bootloader)

Hei guys.. Long time no see .
Let's get to the point. I factory reseted my htc one s (from recovery) (internal, ..etc all i could select). The rebooted my phone. Now the phone won't boot, i am stucked on htc quietly brilliant screen. I CAN'T ACCES BOOTLOADER via Power+volum -. When i try to turn it off (by keep pressing power button until i stops) it restarts after 5-6 secounds(without me touching anything). I can,t turn it of, the adb can't recognize it. My phone is unlocked and S-off. I didn't brick my phone the time i used it..and now i do a factory reset and ..bootlooping ! It will propably turn off when is out of juice!
Any ideas ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What do you expect? You've erased everything from it with that Factory Reset. How it is supposed to boot without a ROM on it?
Keep vol down pressed while it is rebooting, eventually it'll go to bootloader. You probably haven't press it at the right timing. Press power off till it shuts down, then press vol down and keep it pressed until you get the bootloader. Then you can go to recovery and mount to PC, transfer a ROM zip and flash it.
By any chance do you have a nandroid backup of the rom that worked before? Probably not on sdcard (if you erased that also) but on PC. You could try restoring that one from recovery
Sent from nowhere over the air...
Rapier said:
What do you expect? You've erased everything from it with that Factory Reset. How it is supposed to boot without a ROM on it?
Keep vol down pressed while it is rebooting, eventually it'll go to bootloader. You probably haven't press it at the right timing. Press power off till it shuts down, then press vol down and keep it pressed until you get the bootloader. Then you can go to recovery and mount to PC, transfer a ROM zip and flash it.
By any chance do you have a nandroid backup of the rom that worked before? Probably not on sdcard (if you erased that also) but on PC. You could try restoring that one from recovery
Sent from nowhere over the air...
Click to expand...
Click to collapse
i did erase everything..but that shouldn't make me unable to acces my bootloader. I have been trying to het to bootloader for some time...no succes. Now is charging ( the battery was empty) and i am keep trying without any reasults.
I managed to get to recovery with adb (without the adb listing it like a device) I typed "adb reboot recovery" ( when was and and restarting ) until it got to recovery. THANKS FOR HELP

Question Root first or TWRP first

in order to flash GSI Should I root first with Magisk or do I install TWRP and flash GSI then Root?
mdewii23 said:
in order to flash GSI Should I root first with Magisk or do I install TWRP and flash GSI then Root?
Click to expand...
Click to collapse
The latter.
Thank you for the reply. I'm having a problem booting into TWRP. After I flash it and reboot back to download mode it prompts me to unlock to bootloader again.
mdewii23 said:
Thank you for the reply. I'm having a problem booting into TWRP. After I flash it and reboot back to download mode it prompts me to unlock to bootloader again.
Click to expand...
Click to collapse
I've never heard of that. Can you post a pic of the screen where you get this message? Also, after flashing TWRP you need to boot into recovery, not download.
I'll post some tonight when I get home. The tablet didn't do anything when I held the power button and vol up together
mdewii23 said:
I'll post some tonight when I get home. The tablet didn't do anything when I held the power button and vol up together
Click to expand...
Click to collapse
Which model do you have? TWRP is only for the T735.
This is the thread and files I was using.
[UNOFFICIAL][EXPERIMENT] TWRP for Galaxy Tab S7 FE
This is an unofficial and experimental build of TWRP which was tested on the Samsung Galaxy Tab S7 FE (SM-T735) model only. I used TWRP Samsung Galaxy Tab S7+ 5G device tree by ianmacd and modified it. MTP doesn't work at the moment. If you...
forum.xda-developers.com
is there a TWRP version that will work for sm-t733?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After I flash when I reboot to recovery, Should I have the USB plugged in or not? Or doesn't it matter?
The first pic is in download mode when I flash TWRP. The second one is what I get after I flash TWRP and reboot by holding Vol down and PWR at the same time and, as soon as the screen goes dark I switch to Vol up and power. The last one is the log and file I'm flashing in Odin. Let me know if I missing something dumb or if you have any ideas on how to get into TWRP. Thanks Yall!
mdewii23 said:
The first pic is in download mode when I flash TWRP. The second one is what I get after I flash TWRP and reboot by holding Vol down and PWR at the same time and, as soon as the screen goes dark I switch to Vol up and power. The last one is the log and file I'm flashing in Odin. Let me know if I missing something dumb or if you have any ideas on how to get into TWRP. Thanks Yall!
View attachment 5901085View attachment 5901089View attachment 5901091
Click to expand...
Click to collapse
I have my T733 rooted but no TWRP. I haven't seen anyone say have. And without TWRP or fastboot, I don't know of a way to try a GSI.
I did flash TWRP for the Galaxy A52s 5g It has the same chipset and CPU but still no good. I wonder if someone around here could port it over? I'm not that level of nerd, I do tier 2 support.

Categories

Resources