[Q] xperia neo v stuck on logo while starting - General Questions and Answers

:crying:
i had insatlled a custom rom.....and i when i rebooted my phone....it stuck on logo....plss help me.....

Install all the required USB drivers of your phone on the computer. Download the Flash Tool: http://dl-developer.sonymobile.com/tools/Flash_tool_for_Xperia_5.zip
Install the Flash tool. Once you have installed the flash tool open the folder "drivers" from the flash tool folder and run flash-tool drivers setup file. Install all the necessary drivers from the list of drivers provided by setup the file. By doing this you will install all the necessary drivers for your phone in case if you have missed any while flashing the custom ROM. Now download the ROM: http://fs1.d-h.st/download/00031/uCW/LT18i_4.1.B.0.587_(1254-27160).zip
Extract the contents of the zip file and place them in "firmwares" folder in the installed flash tool folder location. Now open the Flash tool and hit the flash button (lightening symbol) and choose Flashmode. Select the firmware you have downloaded above and check the boxes "wipe data" "wipe cache" and "no final verification" and leave the rest unchecked, hit OK.Now switch of your phone by removing the battery. Reinsert the battery and connect it to the PC by holding the back button which will connect your device in flashmode. You can see*green*light glowing on your phone's LED.The process will continue and the official base ROM will be flashed on to your mobile. Once the procedure is completely done unplug your device from the computer and restart it. Your mobile will reboot as a new mobile and you can customize the options on the user start up.
Sent from my Moto G using XDA Premium 4 mobile app

Related

[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]

[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler and http://s7yler.blogspot.com
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
For the Preloader VCOM drivers for Windows 8 please read here, and follow this:
http://thebroodle.com/android/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://mmx-unite2.blogspot.de/2014/08/how-to-create-readback-backup.html
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected. (If you get PMT has changed error, you need to change in SP Flash Tool from "Download Only" to "Firmware Upgrade" but you will need a backup that contains ALL files then including the cache and usrdata files, or it will not allow to flash. Also the phone will be formatted first with Firmware Upgrade, and then flashed.)
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
How to 1-CLICK-ROOT Mediatek 4.2 or 4.4 KitKat Smartphones and change iRoot to normal SuperSU
How to BACKUP / READBACK Mediatek MTK Smartphones with MTK Droid Tools / SP Flash Tool
Here a video how you use SP Flash Tool and flash a ROM (whole process, using Windows 7)
How to repair/change IMEI's with MAUI META on Mediatek Smartphones
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx device written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM.
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool.
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Flash files Spflashtool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. That is more complete. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To flash a backup or ROM with Spflashtool:
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
Click to expand...
Click to collapse
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Trozzul said:
hey great guide man, but please have a mod change the title, it makes it sound like any phone could be rooted this way only to open it and be disapointed that its for MTK65xx only. i would do something like this
[How to][MTK65XX] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM)
Click to expand...
Click to collapse
Hey sorry, I changed my text now. The ROOT part is not only for MTK phones, also other devices. Here is alephzains list of supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980
You also may try it on others, the worst there can happen is that it just says root failed, and not rooting the device. But then you at least have tried.
Rocfiles said:
thank you to my friends so Root I do not know how to just flash the file with flash ebr tools, I do not know the use that is why I ask for help on using just to flash the two files ; thank you again.
I do not know how to use the software to just flash the two files.
and im a french user
Click to expand...
Click to collapse
In Spflash tool load the scatter file from the backup or ROM directory where you also have all files including the modded EBR files, when loaded it will show all the content to flash, every line has a checkmark in front, uncheck everything but the EBR1 and EBR2. And then flash as I write in the guide. That way it will only flash the EBR1 and 2 to the phone.
Hope i can get this right
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
MajorsCloset said:
Hey whats up bro. Thanks for your efforts on helping with this forum. I have the hdc one max and it do not have a removable battery. Im trying to use sp flash tool to retore to stock with rom but i have no way of getting spft to recognize the device to start. Any solution?
Click to expand...
Click to collapse
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Thank you! Thank you! Thank you!
s7yler said:
So you did install all the drivers I write about in my guide, and rebooted? Normally Spflash tool should recognize the phone after that. (and set the USB debugging mode to on?)
Click to expand...
Click to collapse
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
MajorsCloset said:
thanks for everything bro. i manage to finally get the vcom driver installed. with a lil help from usbreview. i flashed the rom i downloaded from needrom like you suggested and bam im back in business. thanks alot. i managed to control the flickering/random button pressing by turning brightness up as a temporary fix. i will try a fix i just found, a little later.
Click to expand...
Click to collapse
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
s7yler said:
I am glad that it worked for you. Does the Youtube app work? can you login on Youtube? with the needrom ROM? or how does the Gapps react on this ROM now?
Click to expand...
Click to collapse
it may be just a update for bugs. the only difference i notice was a x to kill all apps but it still dont work. oh and more notification shortcuts. still cant login in into yourtube and i really need my google apps. i used your guide but i got the drivers from 4shared. i appreciate all your help for real. only if this device wasnt defected from jump with this flicker i would deal with it. i might sell it. smh. i really like this device.lol.
Hi!
For the last few days I was trying to find the right ROM for me. So I had to learn about MTK Tools and SP Flash tool and I even succeeded with loading different ROMs. What I did not succeed is to restore the original backup made with MTK tools. I followed the tutorial from the first post, the flashing operation ended OK but my smartphone (THL w200s) just wouldn't start. As a matter of fact it starts the beginning but after it passes the animated log it stops. I did not flash the CWM recovery on my device before creating the backup as I wanted to save a snapshot of the original ROM as it was from the factory. More than this, I installed a fresh ROM (I guess it was exactly the same with the default one), everything was OK, I rooted and made my settings (configure emails, etc.) and I made a backup with MTK tools. I had the same issue: I restored the backup with SP Flash Tools, flashing was OK but after that the phone would not start.
What am I doing wrong?
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a more advanced & complete 1:1 ReadBack ROM backup using SP FlashTool please check this guide here:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Never needlessly Download preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them, try another version.
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Shaunak Falconzz Pandey said:
thax a lot bro,.,.i tried so many ways to port CW<M to my spice Mi-436,.,bt never succeded
bt after reading your toturial i did it man!!!!
A TONSSSSS of thanks !!!!!
Click to expand...
Click to collapse
I am happy to hear that it worked for you thanks for your comment.
I'm friends with Ruth framaroot phone and then off ... then mtk droid software with admin access and I'll be left bottom blue square root, and after OK, now I'm off to re-using software I could not come up with the phone and check it again before going off the bright green and blue non Ruth ... WHenever the phone or out ROM Mikham CWR Rykhn and are forced to ROM Disturb mobile phone you like'm going to be all Fast boot he has to change imei number do so because they must complete phone mtk software up to took root after changing the number (phone number, I jumped backups without ....) time for the tell greenfield No refused'd action I called the representative has not taken a pay ..... not so mythical after a few moments she wants a ...
I will be grateful if anyone knows how to fix the flaw lead ...
All are according to the latest software version XDA
my phone.....huawei g700-u10
MTK Droid error message
s7yler said:
Hi
This is a guide to ROOT, backup and flash your MTK65xx or Other device (Supported devices: http://forum.xda-developers.com/apps/framaroot/framaroot-supported-devices-t2722980 all credits to alephzain) written by s7yler.
More guides & reviews on my Youtubechannel http://www.Youtube.com/s7yler
(Tools used are Framaroot, MTKDroidtools/CWM and SpflashTool)
I will try to write this guide in step by step, so everyone can understand it. This is for PC and will work with Windows 7.
-> All is done by your own risk! this is just a guide to help people with the tools and process. <-
How to ROOT the phone first
1. Get the latest Framaroot apk here http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
2. Download it and install it on the phone, open the Framaroot app on the phone.
3. Let it be on Install SuperSU, and try the last method, if that dont work, then try one of the 2 others.
4. Then it should say success root, and now reboot the phone.
5. After reboot the phone should be ROOTED, download root checker from the Play store and verify that your rooted.
How to make a simple backup (not completly 1:1) of your stock ROM / MTK phone
1. You have you brand new MTK phone.
2. What I do first is to install all possible drivers. So you go to your PC and install these apps/drivers:
Snappea - http://www.snappea.com/windows
Pdanet drivers - http://pdanet.co/a/ (When it ask what device you have in the install process, just say "Other")
Mediatek Preloader USB VCOM Drivers - (Install file) http://www.mediafire.com/download/cypm22rgs2k83ji/MT6577+USB+VCOM+drivers.rar and here the raw drivers http://www.magicdriver.com/driver4214-ver_1.1123.0.html
3. On your MTK phone you must in "Developer Options" enable "USB debugging mode".
4. Now download MTK Droid Tools here http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922
5. Start MTK Droid Tools, and connect your phone with the USB cable to the PC. (if Windows install some drivers, then let it install them automatically).
6. Now on the first page of MTK Droid Tools, it should display all infos about the phone when you connect it.
7. If the sqare is Green, then you have root shell and ready, if its not green, press the ROOT button to the right in MTK Droid tools.
8. Click the "IMEI/NVRAM" button and then Backup to backup your IMEI/NVRAM, the backup files will be inside of the MTK Droid Tools folder.
Also you can manually write down your IMEI number just in case it should be lost.
9. Now go to the tap "root, backup, recovery" (in MTK Droid Tools).
10. Click the Backup button, and it will create a complete backup of your ROM. (in the end it will ask, if you want to pack it, just answer no)
11. When it is finished then also click "To prepare blocks for FlashTool", that will convert the backup to be compatible with Spflashtool. (choose the files.md5 inside the backup folder)
12. After the backup is done it will be inside "backup" in the MTK Droid Tools folder. And inside it there will also be a new folder called "!Files_to_FlashTool" Inside there the files for Spflashtool is. So when loading your backup with Spflashtool you must load the scatter file from inside there.
13. Now to install CWM (clockworkmod recovery) In MTK Droidtools, choose "To use boot from phone" and click the "Recovery and Boot" button. It will ask you a lot, just say yes every time, and it will end of sending CWM recovery to the phone and reboot into it on the phone. After you see CWM on the phone you know it is done. You can switch the menu with the volume keys, and the power is the select button.
14. Inside CWM you can also do a complete backup of your phone (remember to have enough space, you can do the backup to the internal storage OR to the SDcard - try "backup" if that fails then choose instead "backup to external sd" or vice versa). I recommed doing that because CWM makes another backup than the one made with MTK Droid Tools. So if you should get problems or loose something, you can always run your CWM backup into your phone and it will be as before.
15. After your done the backup, copy the backup also to a safe place on your PC. Just in case!
16. So now your Rooted, have installed CWM recovery, have a IMEI/NVRAM backup and a backup for Spflash Tools plus CWM backup.
To make a 100% FULL 1:1 (more advanced) ReadBack ROM backup using SP FlashTool please check these guides here, and learn how to:
http://forum.gsmhosting.com/vbb/f60...artphone-how-read-backup-1656510/#post9415324
or here:
http://pinoyscreencast.net/how-to/g...-smartphones-using-spft-mtk-droid-root-tools/
To flash a backup or ROM with Spflashtool:
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. I take no responsibility for any harm done while attempting this!
1. Go download Spflash tool here http://forum.xda-developers.com/showthread.php?t=1982576
Both version 3 or 5 should be good to use. If your having problems with one of them or they crash, try this newer version here: http://forum.xda-developers.com/showthread.php?t=2650125
2. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (but can also work with the battery inside the phone, for phones with builtin battery).
2. When you now again connect the USB cable to the phone with the PC while the phone is still off, Windows should popup and beginn to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB VCOM Drivers correct in Windows. After they successfully installed, disconnect the USB cable again.
2. Start Flash_tool.exe to start the program
3. Now hit the "Scatter-loading" button, and go to the backup or ROM, inside the folder "!Flash files Spflashtool" load the scatter.txt file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable)
4. When the scatter file is loaded, it will show all the content in the Spflashtool window.
5. If you only need for example to flash the EBR files, you can deselect all the others. But remember that it must be same ROM or backup.
6. Hit the "Download" button in Spflashtool. Then there should be some pink lines with colors showing that it loads the files.
7. When it stopps to flash/load, connect your phone with the USB cable, remember the phone must be OFF (and without the battery inside if possible to remove). If nothing happens then maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. For example, hold the volume up button down, insert the USB cable, and then insert the battery (still holding the volume up button down) when you hear it connect in Windows and the colored lines begins to move, let go off the volume up button.
8. Now it should connect (maybe Windows install some drivers by now - the MTK65xx Preloader drivers) and it will in the end continue to flash in Spflashtool when the phone is found and connected.
9. Now wait while it flashes all files, when it is done, a window will popup white a Green circle. Now you can disconnect the cable, close Splflashtool and reboot the phone. The phone should now boot up with the new ROM.
10. A good thing can be to do a full factory reset after your booted or do it in CWM, to clear all caches. But not necessary.
To enter Recovery or Download mode - turn phone completly off then
Download mode = vol up + pwr (hold both down for several seconds)
Recovery = vol down + pwr (hold both down for several seconds)
ROMs can be found on
http://needrom.com
http://pan.baidu.com/share/home?uk=2637246389#category/type=0
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
UPDATE
I have updated the Original Post with a video now, that show the whole process how to flash and use SP Flash Tool.
As always, everything is done at your own risk. It is just a guide. This video is for education only.
Very Useful Tips
Hy Man Thanks 4 This Useful Tips. Very Impressed.I Like Xda VeryMuch.
Fun accident
Well here's my story.
I was trying to debrand some Huawei Y330-U05 in order to resell them. My first clue was to root the devices and remove all the Entel PCS crap, but I was unable to remove the Boot Splashscreen. So I looked over the net and I could not find a compatible ROM for my model. I downloaded a Y330-U01 ROM from Europe and I tried to flash it figuring that later I'd have to fix the 3G bands. FlashTools did not let me do that and I had the stupid idea to boot the biit.img and recovery.img from the U01 into the U05 with MTKdroidTools. Bricked the phone, and the only way to bring it back was to use the U01 ROM and flash it back. I changed my device from U05 to U01, like I wanted at first but I cant change the 3G bands and I don't have 3G connnection now.
I can't flash back the U05 backup ROMs I did from the phone before I started messing with them because the of the model mismatch (Phone now thinks it is a U01 version). And since there is no stock ROM for the U05 model to download, except for an UPDATE.APP from Movistar Mexico that phone refuses to accept, I'm afraid that if I reverse the whloe process I will end up with a bricked phone and no Stock ROM to bring it back.
Here comes the question. How do I force install a WRONG ROM into my phone? Remember: my Y330-U05 now thinks it is a Y330-U01.
Thanks a lot!
Blu Studio 5.0 C HD
Can the blu studio 5.0c hd be rooted this way? A bit scared to do it because this is my daily driver
SU Inaccessible error
Ruby_97 said:
------------------------------------------------------------------------------------------------------------
I'm receiving an error message "SU inaccessible" after hitting the ROOT icon. The phone is a No.1 S7 MTK6589.
I previously tried using the Frameroot app but it failed as well.
Any ideas what the problem might be and how to solve?
Thanks,
Ruby
Click to expand...
Click to collapse
i saw your screenshot and yellow box at the bottom clearly indicates that your device has not been rooted properly. adb still exists as secure region. it is said that your device should said to be rooted properly only when your device got adb insecure. However, if your device has locked bootloader, doing so, i.e. entering or making adb insecure may lead your device to dead boot, a stage from which there are only two ways to survive from:- JTAG/RIFF box OR by replacing motherboard!!!!
However, if your bootloader is unlocked and only if your device is dev friendly, following link may help you to get green box at the bottom of MTK Droid Root Tools indicating your device has proper root access.
However, i have successfully solved this error in my panasonic p81 by making adb insecure.
Though, Do this on your own risk....Remember again, making adb insecure may make your device FAIL!!!!
Head over to following link:-
http://forum.xda-developers.com/showthread.php?t=1687590
Thanks to dev Chainfire again for this wonderful application....

[q] cherry mobile amethyst s610

can some1 tell me how to boot on recovery mode? pls tell me.. pls pls pls pls i want to install clockwerkmod thanks in advance :good:
.
im using cherry mobile amethyst s610.. i search everything in the google.. nothing happens..
How to Root and install CWM
I'm also using Cherry Mobile amethyst and i already rooted and installed CWM recovery. I'm going to teach u how to do that. but i used the ROM Manager Pro to go to the Recovery Mode.
1. You have to Root your android phone using Framaroot (Latest version) and you have to download and install the ROM Manager Pro.
Note: Warranty Void
http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 from: alephzain
- Just click the word "Barahir" and wait for the confirmation successfully rooted and reboot your phone.
2. After That, You need to Download the "MTK Droid Tools" , "SP Flash Tools" and MTK Driver. (Search the net for Download)
-install the MTK Driver, Wait for the automatic detection of the device and Click manual install then go to downloaded drivers.
3.Open MTK Droid Tools, then wait to process the Phone Information. You have to Click the "BLOCKS MAP" and after the other window Pop-up with Block Info, Click "SCATTER FILE". This File should be save because it is very important for your device with the name "MT6572_Android_scatter_emmc.txt". Do not Close the MTK Droid Tool.
4. Open the SP Flash Tool, Click "Scatter-Loading" and search the file that you saved earlier with the name "MT6572_Android_scatter_emmc.txt" and Go to "READ BACK TAB". Click "ADD" and the file added at the bottom and Click the File and save it as "ROM_0". You should turn off your Phone. Then Connect it to USB Cable, Unplug the battery first then Click the "Read back Button" and Plug the battery to detect the device and this will be done successfully. You do have "ROM_0" File. DOnt Close SP Flash Tool.
5. Go back to MTK Droid Tools, you can now backup you phone first.Go to "root, backup, recovery" tab, Click "To Process File ROM_* from flash Tool" and select the "ROM_0" you saved earlier. Wait for the task to complete, When the message box appear "Do you want cwm automatically installed", just click "YES".
(Do it with your own Risk, Note: I am not responsible for any Damage, Lost of your data, The Process of flashing will reset your phone into factory reset or it can brick your phone when the procedure is wrong.)
6. After that you can re-flash your stock ROM.Go to SP Flash Tool Again, Then Click Again the "Scatter-Loading" and go to the MTK Droid Tool" Folder named "backup", you will see the backup file you saved a while ago when you process the "ROM_0" File. Open The Folder with the name "S610_******_backup" or "S610_******_ForFlashtoolFromReadBack", you will see the file "MT6572_Android_scatter_emmc.txt" again". after that, all the IMAGE File from your phone will appear on the bottom of SP Flash Tool, Look the name "recovery", if it has File Location, Just chage it, go to "MTK Droid Tool" Folder then open "recovery" folder, you will see the file named "S610_******__recovery_140423-203622.img" and rename it to "recovery.img".
7.Just Click the "Download" button and Unplug and Plug your battery again to detect the Phone. wait it until it done.
8. After the Process completed, Open your Device, install ROM Manager Pro, and when installation completed. Open the Application and Click Reboot into Recovery.
9. The Phone Will reboot and now go to Recovery mode
10. Goodluck
yuwishinu said:
I'm also using Cherry Mobile amethyst and i already rooted and installed CWM recovery. I'm going to teach u how to do that. but i used the ROM Manager Pro to go to the Recovery Mode.
1. You have to Root your android phone using Framaroot (Latest version) and you have to download and install the ROM Manager Pro.
Note: Warranty Void
http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 from: alephzain
- Just click the word "Barahir" and wait for the confirmation successfully rooted and reboot your phone.
2. After That, You need to Download the "MTK Droid Tools" , "SP Flash Tools" and MTK Driver. (Search the net for Download)
-install the MTK Driver, Wait for the automatic detection of the device and Click manual install then go to downloaded drivers.
3.Open MTK Droid Tools, then wait to process the Phone Information. You have to Click the "BLOCKS MAP" and after the other window Pop-up with Block Info, Click "SCATTER FILE". This File should be save because it is very important for your device with the name "MT6572_Android_scatter_emmc.txt". Do not Close the MTK Droid Tool.
4. Open the SP Flash Tool, Click "Scatter-Loading" and search the file that you saved earlier with the name "MT6572_Android_scatter_emmc.txt" and Go to "READ BACK TAB". Click "ADD" and the file added at the bottom and Click the File and save it as "ROM_0". You should turn off your Phone. Then Connect it to USB Cable, Unplug the battery first then Click the "Read back Button" and Plug the battery to detect the device and this will be done successfully. You do have "ROM_0" File. DOnt Close SP Flash Tool.
5. Go back to MTK Droid Tools, you can now backup you phone first.Go to "root, backup, recovery" tab, Click "To Process File ROM_* from flash Tool" and select the "ROM_0" you saved earlier. Wait for the task to complete, When the message box appear "Do you want cwm automatically installed", just click "YES".
(Do it with your own Risk, Note: I am not responsible for any Damage, Lost of your data, The Process of flashing will reset your phone into factory reset or it can brick your phone when the procedure is wrong.)
6. After that you can re-flash your stock ROM.Go to SP Flash Tool Again, Then Click Again the "Scatter-Loading" and go to the MTK Droid Tool" Folder named "backup", you will see the backup file you saved a while ago when you process the "ROM_0" File. Open The Folder with the name "S610_******_backup" or "S610_******_ForFlashtoolFromReadBack", you will see the file "MT6572_Android_scatter_emmc.txt" again". after that, all the IMAGE File from your phone will appear on the bottom of SP Flash Tool, Look the name "recovery", if it has File Location, Just chage it, go to "MTK Droid Tool" Folder then open "recovery" folder, you will see the file named "S610_******__recovery_140423-203622.img" and rename it to "recovery.img".
7.Just Click the "Download" button and Unplug and Plug your battery again to detect the Phone. wait it until it done.
8. After the Process completed, Open your Device, install ROM Manager Pro, and when installation completed. Open the Application and Click Reboot into Recovery.
9. The Phone Will reboot and now go to Recovery mode
10. Goodluck
Click to expand...
Click to collapse
thanks a lot !!!!! u're such a big help!! :good:
oh yeah, i forgot.. did you boot on downloading mode or you just turn off your phone?
Help! i need stock rom for amethyst
sr, can you up your amethyst stock rom backup,.here plsssss? im stock at boot logo,.,help plssss,., thanks,.
Heaven0918 said:
sr, can you up your amethyst stock rom backup,.here plsssss? im stock at boot logo,.,help plssss,., thanks,.
Click to expand...
Click to collapse
try flashing the rom again
please upload stockrom.. im on bootloop no cwm recovery yet.. huhuhuhu
please need stock rom for amethyst im in boot loop too :crying::crying::crying::crying::crying:
thread: [q] cherry mobile amethyst s610 Logged in as shield89 Image Verification
balot.ko said:
try flashing the rom again
Click to expand...
Click to collapse
what is the shortcut keys for recovery mode? you can't do it if hangups to boot logo...
balot.ko said:
can some1 tell me how to boot on recovery mode? pls tell me.. pls pls pls pls i want to install clockwerkmod thanks in advance :good:
Click to expand...
Click to collapse
mobile uncle tool po tas recovery.img po.. pag mag CWM.. )
Volume up+Powerbutton (hold) saksak mo Charger, wait.

How to root A110 using SP flash tools

Today I am sharing how to root MMX A110 using sp flash tools
First you need some things download below
1) CWM recovery
http://d-h.st/Ky2
Thnxx @suhas.holls
2) MMX A110 Drivers
http://www.mediafire.com/?5ai8nwihmp30grw
3) VCOM drivers
http://www.mediafire.com/?3wec990b42j3nn7
4) SP flash tools
http://www.mediafire.com/?b111ivr9it76cma
5) Supersu.zip
http://www.mediafire.com/?i1y443she8hlby6
6) MT6577 scatter file
http://www.mediafire.com/?2cp7i70khi8fe84
Now after downloading all things
1)Install The drivers in your PC or lappy whatever, window xp or 7 should be used.
2)Now first copy supersu.zip into root(out of every folder)of your phone's SD card
3) Now in developers option tick USB Debugging
4) Switch off the phone remove then replace battery and connect it to PC now your PC will install MTK preloaders.
5) Now remove data cable and don't turn on the phone, if its turned on itself then turn it off
6) Now open sp flash tools folder and open spflashtools.exe , search for the option "Scatter-Loading" and click on it and locate the scatter file you downloaded.
7) A list will appear then untick all except"Recovery"
8) Click on recovery and locate the cwm recovery you downloaded.
9) After selecting recovery insert data cable in PC and not in phone only connect one side i.e. to the PC.
10)Now click on download button and a countdown will start in the lower progress bar then connect your phone (in switched off state) Then a yellow bar and a green bar will appear and after that a green ring will appear saying "Download OK".
Your phone's recovery is now cwm.
11) Now remove phone and press Volume up volume down power key simultaneously and a mode will appear with two option recovery mode and factory mode.
12) Using volume up choose recovery mode and press power key.
13) then choose again recovery mode and press volume down key.
14) Now choose Install a zip from SD card and select"supersu.zip"And after installing it reboot your phone.
After rebooting you will find an app named Supersu
Hurray Your phone is rooted and now it has endless things to do.
Remember- Rooting void your phone's warranty
If you liked my work, please Hit thanks button it will motivate me and won't cost you.
Important
avinash130413 said:
Today I am sharing how to root MMX A110 using so flash
I am not responsible if anything happens to your phone, do at your own risk..
Click to expand...
Click to collapse

[mtk device only] how to make your phone "alive" again, from bricked / dead state?

[mtk device only] how to make your phone "alive" again, from bricked / dead state?
Requirements:
1. SP Flash Tool
2. MTKdroid tool Backup or your Stock ROM
3. VCOM Drivers (For Mt65xx)
Steps:-
a) Extract the stock rom/ backup rom from zip and VCOM
Driver in desktop.
b) Switch off Your phone and remove battery.
c) Open Device manager in PC. (Start-> run ->
"devmgmt.msc")
d) Connect the phone to PC.
e) In device manager you can find a yellow line appear
after the phone is connected. "MT65xx preloader".
f) Right click on it and click update. Browse to Desktop
and click next to update. A red box will come, press
"continue installation" .
g) Open SP Flash tool folder and click on Flash_Tool.exe
h) Browse to the scatter File MT65xx_Android_scatter_emmc_PMT.txt in the stock
romfolder.
i) Make sure all are checked except USRDATA. Then press a Download button.
j) Then connect your switched off mobile. Then you can
see some progress is going on in blue and red(without battery)
k) After getting a green circle. You are done. Put the
battery in and Power on the mobile.
Enjoy your new Alive Handset.
Note: While flashing the rom using sp flash tools if
someone gets some error, then instead of download
option use firmware upgrade. Check all the files including
usrdata. Your rom will get flashed.
For any other errors you can search Google using the
error name.
Hit thanks button if this post helped you..

Totally bricked a ZTE Blade L3, any solutions?

Hello,
tried to flash a custom OS and root on a ZTE Blade L3. I got CWM Recovery working and flashed a CM12.1 rom on it, after that, it failed to mount all partitions /cache etc. etc. then I restarted the phone and it bootloops + fades white immediatly!
Recovery or Bootloader etc. dont work
If I connenct the phone on my computer it connect, disconnnect, connect, disconnect and so on.
Anyone a solution or idea how I could save that?
I can help you, So first we have to know is it Hard bricked or just Soft bricked, In any case it's not hard to unbrick. Just follow these steps :silly:
1. Download SPFlashTool to your PC https://androidmtk.com/smart-phone-flash-tool
2.Download Drivers for MTK6582 (I hope I wrote the right MTK name) http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip
3.Download stock firmware
http://r.srvtrck.com/v1/redirect?ur...ar&ad_t=advertiser&ad_zi=YieldLink&ad_dt=link
IF SOFT BRICKED:
-Update drivers with the one up there in the thread, Open SPFlashTool, Find scatter file (just a file with a .txt extension) and place it in Scatter file area in SPFlashTool (search on YouTube how to use SP), After you did that manually add the files that are missing ( it's usually the recovery and some other files that are missing), Then press download and AFTER that connected your phone with a USB cable! Then wait it to flash :victory: ,
IF HARD BRICKED:
-Remove battery,
-Connect to PC with USB cable
-It probably won't recognise your phone, so we need to enter so called META mode so we could flash the PRELOADER, to make the phone recognisable.
-To enter META mode remove battery( if you didn't), connect as I said up there, and try pressing and holding some buttons, I can't remember the correct combination that enters META mode but I think it was all buttons for 5 seconds, anyway you will know when you entered META mode if your PC recognises a change or if he finds the device :good:
-then enter SPFlashTool and flash the PRELOADER only (hope you know to use SPFlashTool)
-After that disconnect your phone and add battery
-Enter SPFlashTool and Flash whole system (all files except CACHE AND USER)
-You should be done ?
Hope it helps
Here's a total solution
https://androidfilehost.com/?fid=746010030569947486
Flash tool and stock ROM included. Just follow this:
1. unpack
2. run flashtool.exe
3. load scatter
4. click download
5. unplug your battery and plug the phone to your PC via USB
6. wait for process to finish and unplug your phone
7. Boot
P.S. I guess you'll need some drivers. Check the post above.
Good luck!

Categories

Resources