Hello,
I triad flashing the official GPE rom to my Moto G. It didn't boot, so I went into recovery.
Now I cannot mount /data and /sdcard. I tried both CWM and TWRP.
What can I do?
solved it by flashing the semi-official gpe images via fastboot
Gesendet von meinem XT1032 mit Tapatalk
NonsensNinja said:
Hello,
I triad flashing the official GPE rom to my Moto G. It didn't boot, so I went into recovery.
Now I cannot mount /data and /sdcard. I tried both CWM and TWRP.
What can I do?
Click to expand...
Click to collapse
Did you flash all partitions, ie inc gpt.bin etc. I'm thinking of flashing official gpe to my UK moto g but want to make sure it works OK.
Sent from my XT1032 using XDA Premium 4 mobile app
scott_doyland said:
Did you flash all partitions, ie inc gpt.bin etc. I'm thinking of flashing official gpe to my UK moto g but want to make sure it works OK.
Sent from my XT1032 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I flashed the zip via cwm.
Semi-official works perfect though.
I am receiving the following error: fastboot flash partition gpt.bin
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slotartition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.048s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
Although the bootloader is unlocked. What can I do?
Hi,
Sorry form my English.
I have problem with moto g (xt1039). I try to flash new firmware, but I writed firmware for different models, wright now phone stuck at recovery mode. When I write new firmware I always have error. My bootloader is unlocked. I try to write this two firmware ( first: (Moto_G_LTE_XT1039)_RET-GB-SS_4.4.4_KXB21.14-L1.46_cid7_CFC_1FF.xml, second: (Moto_G_LTE_XT1039)_TESCO-GB_4.4.4_KXB21.14-L1.46_cid7_CFC_1FF.xml) and I have this error:
C:\Users\kacpe_000\Desktop\RETAIL-GB_4.3_14.10.0Q3.X-76-LGG-8_cid7_CFC_1FF_svc.x
ml.modaco.r3>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.033s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.384s]
finished. total time: 0.421s
C:\Users\kacpe_000\Desktop\RETAIL-GB_4.3_14.10.0Q3.X-76-LGG-8_cid7_CFC_1FF_svc.x
ml.modaco.r3>mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.110s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) Failed to erase partition
(bootloader) Failed to flash rpm
FAILED (remote failure)
finished. total time: 11.124s
I do everythings from this topic: http://forum.xda-developers.com/showthread.php?t=2542219
This phone had firmware from tesco GB.
Stock recovery?
me_is_rushin said:
Stock recovery?
Click to expand...
Click to collapse
Yes, I don't change recovery. I always write stock firmware using that guide.
Hi there!
Before I flashed these I had 5.1.1 Retail UK stock, rooted, xposed installed with gravitybox, disabled the softkeys with the build.prop command & turned the volume up with rx_mixerpaths
I downloaded XT1541_OSPREY_RETGB_5.1.1_LPI23.72-47_cid7_subsidy-DEFAULT_CFC.xml.zip from this thread & used this guide http://forum.xda-developers.com/2015...ctory-t3187750 to flash the phone to complete stock before I pass it down the family.
Upon booting it won't turn on the WiFi, I try to turn it on & it flicks off straight away. I had a quick search & came across this thread http://forum.xda-developers.com/moto...tooth-t2813308 I have checked the /persist folder & its empty unlike those guys in that thread.
I was wondering if someone could be generous enough to share these files with me? Unless there is another way to get the WiFi working again?
Many many thanks!
Below is a copy of the fastboot commands.
C:\adb>fastboot devices
ZY2223RTMH fastboot
C:\adb>fastboot flash partition gpt.bin
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.713s]
finished. total time: 0.720s
C:\adb>fastboot flash bootloader bootloader.img
target reported max download size of 268435456 bytes
sending 'bootloader' (2546 KB)...
OKAY [ 0.085s]
writing 'bootloader'...
(bootloader) flashing sbl1 ...
(bootloader) flashing aboot ...
(bootloader) flashing tz ...
(bootloader) flashing hyp ...
(bootloader) flashing rpm ...
OKAY [ 1.596s]
finished. total time: 1.683s
C:\adb>fastboot flash logo logo.bin
target reported max download size of 268435456 bytes
sending 'logo' (917 KB)...
OKAY [ 0.033s]
writing 'logo'...
OKAY [ 0.074s]
finished. total time: 0.108s
C:\adb>fastboot flash recovery recovery.img
target reported max download size of 268435456 bytes
sending 'recovery' (16484 KB)...
OKAY [ 0.524s]
writing 'recovery'...
OKAY [ 0.446s]
finished. total time: 0.971s
C:\adb>fastboot flash system system.img_sparsechunk.0
target reported max download size of 268435456 bytes
sending 'system' (262140 KB)...
OKAY [ 8.236s]
writing 'system'...
OKAY [ 6.949s]
finished. total time: 15.187s
C:\adb>fastboot flash system system.img_sparsechunk.1
target reported max download size of 268435456 bytes
sending 'system' (262143 KB)...
OKAY [ 8.223s]
writing 'system'...
OKAY [ 6.777s]
finished. total time: 15.003s
C:\adb>fastboot flash system system.img_sparsechunk.2
target reported max download size of 268435456 bytes
sending 'system' (232608 KB)...
OKAY [ 7.297s]
writing 'system'...
OKAY [ 6.221s]
finished. total time: 13.519s
C:\adb>fastboot flash system system.img_sparsechunk.3
target reported max download size of 268435456 bytes
sending 'system' (233343 KB)...
OKAY [ 7.332s]
writing 'system'...
OKAY [ 6.012s]
finished. total time: 13.348s
C:\adb>fastboot flash system system.img_sparsechunk.4
target reported max download size of 268435456 bytes
sending 'system' (257130 KB)...
OKAY [ 8.067s]
writing 'system'...
OKAY [ 6.554s]
finished. total time: 14.623s
C:\adb>fastboot flash system system.img_sparsechunk.5
target reported max download size of 268435456 bytes
sending 'system' (228585 KB)...
OKAY [ 7.171s]
writing 'system'...
OKAY [ 5.850s]
finished. total time: 13.024s
C:\adb>fastboot flash modem NON-HLOS.bin
target reported max download size of 268435456 bytes
sending 'modem' (36940 KB)...
OKAY [ 1.165s]
writing 'modem'...
OKAY [ 1.006s]
finished. total time: 2.172s
C:\adb>fastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.016s]
finished. total time: 0.017s
C:\adb>fastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.014s]
finished. total time: 0.015s
C:\adb>fastboot flash fsg fsg.mbn
target reported max download size of 268435456 bytes
sending 'fsg' (2031 KB)...
OKAY [ 0.068s]
writing 'fsg'...
OKAY [ 0.081s]
finished. total time: 0.151s
C:\adb>fastboot erase cache
erasing 'cache'...
OKAY [ 0.019s]
finished. total time: 0.019s
C:\adb>fastboot erase userdata
erasing 'userdata'...
OKAY [ 0.795s]
finished. total time: 0.796s
C:\adb>fastboot reboot
rebooting...
finished. total time: 0.007s
I had the exact same problem when trying to flash the generic Canadian firmware. I flashed three times to no avail. Then I downloaded and flashed a carrier-specific version of the Canadian firmware and suddenly wifi worked.
Sevael said:
I had the exact same problem when trying to flash the generic Canadian firmware. I flashed three times to no avail. Then I downloaded and flashed a carrier-specific version of the Canadian firmware and suddenly wifi worked.
Click to expand...
Click to collapse
Any chance you'd be able to share your files in /persist folder if you are rooted?
I think this will sort it. The phone was a simfree one I don't really want to flash carrier-specific software if possible.
Powereh said:
I think this will sort it. The phone was a simfree one I don't really want to flash carrier-specific software if possible.
Click to expand...
Click to collapse
The carrier-specific one won't lock your phone or put any bloatware on it. It's simply one that was taken from a phone that somebody bought from that carrier. The one I used was from a different carrier than the one I bought the phone from originally.
Powereh said:
Any chance you'd be able to share your files in /persist folder if you are rooted?
Click to expand...
Click to collapse
I can't from where I am right now. Hopefully you can find someone who can upload it, otherwise I recommend giving a different firmware download a try.
Here ya go, keep in mind this is from XT1540 Canadian retail.
https://drive.google.com/file/d/0B4Gyz91x5k7gdUoxQUtldEZ3Wmc/view?usp=docslist_api
Sent from my MotoG3 using XDA Free mobile app
Cheers for the help guys, I will try those files out once i get home from work later.
I'll let you know the outcome in due course.
christopherrrg said:
Here ya go, keep in mind this is from XT1540 Canadian retail.
https://drive.google.com/file/d/0B4Gyz91x5k7gdUoxQUtldEZ3Wmc/view?usp=docslist_api
Sent from my MotoG3 using XDA Free mobile app
Click to expand...
Click to collapse
OK tried your files & it just keeps force closing every thing upon boot an endless amount.
I think I need XT1541 specific files.
Thank you so much for taking the time to upload those though! I really appreciate it.
Fixed it I had to flash this one instead Retail Great Britain (1GB) - XT1541_OSPREY_RETGB_5.1.1_LPI23.72-22_cid7
Cheers for the guys who tried to help
Powereh said:
Fixed it I had to flash this one instead Retail Great Britain (1GB) - XT1541_OSPREY_RETGB_5.1.1_LPI23.72-22_cid7
Cheers for the guys who tried to help
Click to expand...
Click to collapse
Glad you're back up! Change thread to solved in case passer bys need the information.
Sent from my MotoG3 using XDA Free mobile app
christopherrrg said:
Glad you're back up! Change thread to solved in case passer bys need the information.
Sent from my MotoG3 using XDA Free mobile app
Click to expand...
Click to collapse
I don't think the issue is solved, he just returned to the previous factory image, I'm having the same issue with the US model. I posted in the factory image thread on general and I'm not the only one
at least for some people if you try to upgrade via fastboot, wifi is broken
sgloki77 said:
I don't think the issue is solved, he just returned to the previous factory image, I'm having the same issue with the US model. I posted in the factory image thread on general and I'm not the only one
at least for some people if you try to upgrade via fastboot, wifi is broken
Click to expand...
Click to collapse
Agreed - I have this problem as well. I've searched through the threads, but haven't found a solution yet.
cdluck said:
Agreed - I have this problem as well. I've searched through the threads, but haven't found a solution yet.
Click to expand...
Click to collapse
you need to flash back to the original factory image and then take the OTA , do NOT try to upgrade directly with the latest factory image, or you will find yourself in brick city
Sent from my Nexus 6 using Tapatalk
sgloki77 said:
you need to flash back to the original factory image and then take the OTA , do NOT try to upgrade directly with the latest factory image, or you will find yourself in brick city
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I'll try that, thanks - is flashing back to the original factory image the same process, just with a different zip (e.g. XT1540_OSPREY_RETUS_2GB_5.1.1_LPI23.72-44_cid9_subsidy-DEFAULT_CFC)?
Also, this wifi thing is weird - I was able to connect to my home wifi without issue, but my work wifi causes the shutdown problem (if I try to fiddle with it and get it to connect, it just crashes and reboots the phone).
cdluck said:
I'll try that, thanks - is flashing back to the original factory image the same process, just with a different zip (e.g. XT1540_OSPREY_RETUS_2GB_5.1.1_LPI23.72-44_cid9_subsidy-DEFAULT_CFC)?
Also, this wifi thing is weird - I was able to connect to my home wifi without issue, but my work wifi causes the shutdown problem (if I try to fiddle with it and get it to connect, it just crashes and reboots the phone).
Click to expand...
Click to collapse
no man [emoji33] that one you quoted is the bad apple, when I said "original" I meant the one your phone shipped with(16.3)
Sent from my Nexus 6 using Tapatalk
sgloki77 said:
no man [emoji33] that one you quoted is the bad apple, when I said "original" I meant the one your phone shipped with(16.3)
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
My mistake, I copied the name from the wrong file - thanks for catching that for me!
sgloki77 said:
you need to flash back to the original factory image and then take the OTA , do NOT try to upgrade directly with the latest factory image, or you will find yourself in brick city
Click to expand...
Click to collapse
:crying: really!?, I was thinking about update directly with latest firmware to avoid OTA
El_Nuevo said:
:crying: really!?, I was thinking about update directly with latest firmware to avoid OTA
Click to expand...
Click to collapse
by my experience
-flashing 16.3 image was ok,
-flashing 44 image (I only flashed system and radio) resulted in broken wifi
by other users' experiences I read
-flashing 44 image(all partitions) resulted in a brick
-flashing 47 image was ok at least by one user
my device is XT1540 US 1GB RAM at this point I would suggest you research your particular model/factory images compatible with your model and decide for yourself what factory image to flash, there's been a few bricks already so beware of dragons...
I m using Droid Ultra (xt1080) SU6-7.7 and i was trying to flash the same firmware because the previous one was corrupted and wifi and bluetooth stoped working and settings began to crash , etc.
I downloaded RSD Lite latest version and adb drivers and stuff and i charged the phone to 100% and finally started flash and it went good in the start but when it began to flash system.img it took a long time and FAILED. with a message on the screen "invalid entry hash for system index=0"
I also tried House Of Moto , Adb and Fastboot but it also gives the error: "invalid sparse file format at header magi". PLEASE HELP ME OUT OF THIS MY DEVICE IS BRICKED
the firmware i m trying to flash " VZW-4.4.4-SU6-7.7-release-keys.xml.zip "
DeXtern00b said:
I m using Droid Ultra (xt1080) SU6-7.7 and i was trying to flash the same firmware because the previous one was corrupted and wifi and bluetooth stoped working and settings began to crash , etc.
I downloaded RSD Lite latest version and adb drivers and stuff and i charged the phone to 100% and finally started flash and it went good in the start but when it began to flash system.img it took a long time and FAILED. with a message on the screen "invalid entry hash for system index=0"
I also tried House Of Moto , Adb and Fastboot but it also gives the error: "invalid sparse file format at header magi". PLEASE HELP ME OUT OF THIS MY DEVICE IS BRICKED
the firmware i m trying to flash " VZW-4.4.4-SU6-7.7-release-keys.xml.zip "
Click to expand...
Click to collapse
did you verify md5 checksum?
sd_shadow said:
did you verify md5 checksum?
Click to expand...
Click to collapse
How to do that.... i m a noob in android....
Thanks in Advance
sd_shadow said:
did you verify md5 checksum?
Click to expand...
Click to collapse
i dont think its something wrong in the file because i have tried download the file twice and from other websites either
Nothing wrong in md5
sd_shadow said:
did you verify md5 checksum?
Click to expand...
Click to collapse
@sd_shadow i just confirmed the md5 and its the same in the xml.... and when i flash it manualy in fastboot i get the error : Cannot load system.img: Not enough space..
please tell me what to do.... my device is nearly bricked and i have lost all hope
DeXtern00b said:
@sd_shadow i just confirmed the md5 and its the same in the xml.... and when i flash it manualy in fastboot i get the error : Cannot load system.img: Not enough space..
please tell me what to do.... my device is nearly bricked and i have lost all hope
Click to expand...
Click to collapse
try mfastboot
Code:
mfastboot flash system system.img -P
Still no luck
sd_shadow said:
try mfastboot
Code:
mfastboot flash system system.img -P
Click to expand...
Click to collapse
Thats what i got after your command : @sd_shadow
C:\android-sdk-windows\platform-tools>mfastboot flash system system.img -P
(bootloader) Variable not supported!
target max-download-size: 768MB
Multi-Flash is enabled!
sending 'system' (262144 KB)...
OKAY [ 68.798s]
writing 'system'...
OKAY [ 25.042s]
sending 'system' (262144 KB)...
OKAY [ 60.104s]
writing 'system'...
OKAY [ 25.229s]
sending 'system' (262144 KB)...
OKAY [ 35.584s]
writing 'system'...
OKAY [ 24.540s]
sending 'system' (262144 KB)...
OKAY [ 29.200s]
writing 'system'...
OKAY [ 23.672s]
sending 'system' (262144 KB)...
OKAY [ 16.759s]
writing 'system'...
OKAY [ 23.892s]
sending 'system' (7783 KB)...
OKAY [ 0.813s]
writing 'system'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 334.857s
@sd_shadow is there a way o flash another Os in fastboot like ubuntu or something to unbrick the dev if not then how do i flash android back on it? :/
DeXtern00b said:
@sd_shadow is there a way o flash another Os in fastboot like ubuntu or something to unbrick the dev if not then how do i flash android back on it? :/
Click to expand...
Click to collapse
no
Sent from my KFFOWI using XDA Labs
@sd_shadow then how can i unbrick it
DeXtern00b said:
@sd_shadow then how can i unbrick it
Click to expand...
Click to collapse
try flashing just the boot.img then reboot
Sent from my DROID Turbo using XDA Labs
Still no luck
sd_shadow said:
try flashing just the boot.img then reboot
Sent from my DROID Turbo using XDA Labs
Click to expand...
Click to collapse
No Valid PIV block in SP for system
piv validation failed (system)
Boot up failed @sd_shadow
Okay, so all day, I've been trying to fix this damn phone because of a root fail. I unlocked the bootloader, installed SuperSU and now the phone just reboots with a white screen and red words saying this build is for development purposdes only. I can get to download and bootloader mode fine though. Its S-On Bootloader Unlocked. I would honestly settle for it to be set to factory settings as I just need the phone fixed. Rooting has been so stressful. I don't care about losing data.
I'm thinking it failed because I used an SDHC 32GB Micro SD Card? Ive been trying to use a recovery img, Im using HTC Android Phone ROM Update Utility and thats not working. It asks to update the ROm version from 3.35.401.12 to image version (shows nothing). Then it says image error 158 (cannot update my android phone).
When flashing a recovery image, I get:
C:\Users\shaif\Downloads\Root M9>fastboot flash recovery recovery.img
target reported max download size of 800000000 bytes
sending 'recovery' (32848 KB)...
OKAY [ 2.503s]
writing 'recovery'...
(bootloader) HOSD CL#671758
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) Update partition OK
(bootloader) [email protected]
OKAY [ 2.792s]
finished. total time: 5.301s
Still not working.
Also tried fastboot oem rebootRUU but that took me to a screen that says Security Warning
Someone please help me, Im desperate
Hi !
I see that you have fixed your issue https://forum.xda-developers.com/showpost.php?p=71188370&postcount=1372 so I close this down
Cheers !