[Q] How to ROOT Galaxy GT-N8000 with 4.4.2 Oficial rom? - Galaxy Note 10.1 Q&A, Help & Troubleshooting

I'd like to install Gnabo's rom but for it I have to install a new recovery (CWM).
This CWM replacement recovery do the root together, right?
But I'm afraid cause the KNOX will be counted, right?
So what can I do?
Thank you.

LeandritoG said:
I'd like to install Gnabo's rom but for it I have to install a new recovery (CWM).
This CWM replacement recovery do the root together, right?
But I'm afraid cause the KNOX will be counted, right?
So what can I do?
Thank you.
Click to expand...
Click to collapse
Hi,
Yes you are correct it will be counted however this is a way to reset it. Check this very detailed guide written by Darkman. It explains step by step how to root the phone and Install CWM over Odin. All the links are there.
[RECOVERY][RootGuide][ALL NOTE 10.1]Official CWM Recovery Touch & Non-Touch 6.0.3.6
Instead of installing the regular CWM may I suggest installing Phillz version of CWM, Samsung Galaxy Note 10.1 GT-N8010 (WiFi Only) PhilZ Touch Advanced CWM Recovery its CWM but tweaked. I have been trying to install a the Hyperdrive rom for days now and have had no luck over CWM or TWRP due to the AROMA freezing issue and I just tried Phillz and it flashed the Rom no problem the first time. I literally tried over 100 times today to flash it over CWM and nothing.
Hope that helps. PM me if you have any issues

I rooted my device with framaroot. You can find it with search.

HuaweiVogue said:
I rooted my device with framaroot. You can find it with search.
Click to expand...
Click to collapse
Just framroot, thats it? You dont have to do all the geek process explained in forums? After framroot, were you able to import apps successfully through titanium backup?

Related

[GUIDE] Root + CWM Samsung Galaxy Ace Plus S7500 / S7500L - Easy Way

Download CWM Recovery.7z from attachments. Extract Recovery.tar
Download Superuser-3.1.3-arm-signed.7z (or newer from http://androidsu.com/superuser/). Extract Superuser-3.1.3-arm-signed.zip and copy it to your SD card (internal or external).
Put your phone in Download mode. Flash Recovery.tar using Odin.
Put your phone in Recovery mode. Flash Superuser-3.1.3-arm-signed.zip from recovery
Reboot and ready
Thanks developers!
So no need to make kernel un secure?
This post goes to my complete guide for Samsung galaxy ace plus...
Sent from my GT-S7500 using xda premium
I didn't needed. The other method posted makes the S7500L keep rebooting into recovery. So, I flashed stock firmware (S7500LVJLH1) with Odin and start over again, but same result.
I'd flashed again stock firmware and just flash recovery with Odin, then just write Superuser from recovery.
I hadn't time to verify if the problem was with boot.tar or with files that are installed in recovery mode by .bat file.
Sent from my GT-P1010 using xda app-developers app
شكراااااااااااااااااااااااااااااااا&#157
thanxssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Can i use this Superuser 3.1.3-arm.zip for rooting Galaxy Ace S5830 ??
Sent from my GT-S5830 using xda premium
Yeah... For any phone with ARM CPU core
Sent from my GT-I9100 using xda app-developers app
issues after flashing gt-s7500T
lokeshsaini94 said:
So no need to make kernel un secure?
This post goes to my complete guide for Samsung galaxy ace plus...
Sent from my GT-S7500 using xda premium
Click to expand...
Click to collapse
I got my hands on a gt-s7500t yesterday and started xda searching on how to put a custom rom on it. i tried all the methods listed under s7500 to put cwm in it but none worked and whenevr i tried to enter either through pressing vol "+" "-" home and power it never enetred recovery nor it enetered through adb so i moved onto flashing cwm through s7500L guide. so by using http://forum.xda-developers.com/showthread.php?t=1725198 guide, i flased successfully flashed cwm and the phone was stuck in recovery boot loop.
I successfully rooted by through cwm and even installed a custom rom but the dammit phone never came out of the recovery loop, so i went to the next step and downloaded a stock UK vodafone firmware from sam mobile and tried flashing that since australian s-7500t stock rom is unavailable.
Now odin gave a "fail" meesage when it reached to flashing fat.bin, i tried almost 3 different stock roms but same problem. I took the battery out, and tried starting the phone the phone started but no display, so i connected it to samsung kies hoping kies will have a solution, well as it turned out that when i went into emergency firmware recovery, the device screen magically lit up for few seconds and went dark again.
i was baffled so i decided to repeat the process http://forum.xda-developers.com/showthread.php?t=1725198 and flash cwm and boot again. well this time when this completed and phone restarted the phone restarted normally and everything seemed fine, so through adb i went into recovery mode again just to see if all was working fine, but now its the same recovery loop again, have tried wiping the dalvik cache, factory reset and cache reset but nothing happening, HAVENT tried the advanced>recovery reboot> procedure, yet.
now am thinking of two options. first to try install another custom rom and see if that might hellp or since iv got another galaxy ace plus, try to extract the custom s7500T rom out of it somehow, (if u guys can tell me howto, cuz i tried titanium backuo but since it requires root and since i cant get into cwm without using s7500L technique which soft bricks i cant use titanium backup to extract the rom)
Anyone got any idea what to do? is there a pit,bootloader,csc,phone etc files that i can flash through odin rather than flashing a complete package through PDA?
or can i just flash boot.img from a stock rom using PDA and you guys think that will solve the problem>?
Android System Recovery (3e) problem
i flashed "recovery.tar" as PDA via Odin3...then went into recovery mod but it say "Android System Recovery (3e)"..i think its Samsung's default recovery ... so where is CWM???
hi guys!
i have a problem with my ace plus and i have to bring it to a warranty center.. so i have to restore the stock rom and un-root.. any help?
is there a guide to do it? do you know where i can find the stock rom?
thanks a lot
If I root my phone, any advantage in the new root between old 1....
Can someone help me?
My Galaxy Ace Plus (S7500) doesn't want to boot in download mode
Thanks guys, great work
However, my Ace plus is GT - S7500W (London 2012 limited edition)
Is there anyway to root it?
Thanks so much!
Hi, Is there a easy way to unroot this method? Do all my files and settings remain intact when using this root method?
Thanks.
kol12 said:
Hi, Is there a easy way to unroot this method? Do all my files and settings remain intact when using this root method?
Thanks.
Click to expand...
Click to collapse
This method don't erase your data, just write a custom recovery and add SuperUser app and bin to your system.
The best method to unroot is installing stock firmware package.
farodriguez said:
This method don't erase your data, just write a custom recovery and add SuperUser app and bin to your system.
The best method to unroot is installing stock firmware package.
Click to expand...
Click to collapse
Thanks. So does installing stock firmware not write any files to the data partition of android? What about the apps that are included in stock firmware sms app, contacts,call logs, maps etc, will those apps data be lost with installing stock firmware?
---------- Post added at 11:27 AM ---------- Previous post was at 11:23 AM ----------
The recovery.img you have is larger than the stock firmware recovery.img. Does this write more data somewhere?
here is Android 4.1.2 for Galaxy ace plus working
http://forum.xda-developers.com/show...5#post38450355
fido747 said:
I got my hands on a gt-s7500t yesterday and started xda searching on how to put a custom rom on it. i tried all the methods listed under s7500 to put cwm in it but none worked and whenevr i tried to enter either through pressing vol "+" "-" home and power it never enetred recovery nor it enetered through adb so i moved onto flashing cwm through s7500L guide. so by using http://forum.xda-developers.com/showthread.php?t=1725198 guide, i flased successfully flashed cwm and the phone was stuck in recovery boot loop.
I successfully rooted by through cwm and even installed a custom rom but the dammit phone never came out of the recovery loop, so i went to the next step and downloaded a stock UK vodafone firmware from sam mobile and tried flashing that since australian s-7500t stock rom is unavailable.
Now odin gave a "fail" meesage when it reached to flashing fat.bin, i tried almost 3 different stock roms but same problem. I took the battery out, and tried starting the phone the phone started but no display, so i connected it to samsung kies hoping kies will have a solution, well as it turned out that when i went into emergency firmware recovery, the device screen magically lit up for few seconds and went dark again.
i was baffled so i decided to repeat the process http://forum.xda-developers.com/showthread.php?t=1725198 and flash cwm and boot again. well this time when this completed and phone restarted the phone restarted normally and everything seemed fine, so through adb i went into recovery mode again just to see if all was working fine, but now its the same recovery loop again, have tried wiping the dalvik cache, factory reset and cache reset but nothing happening, HAVENT tried the advanced>recovery reboot> procedure, yet.
now am thinking of two options. first to try install another custom rom and see if that might hellp or since iv got another galaxy ace plus, try to extract the custom s7500T rom out of it somehow, (if u guys can tell me howto, cuz i tried titanium backuo but since it requires root and since i cant get into cwm without using s7500L technique which soft bricks i cant use titanium backup to extract the rom)
Anyone got any idea what to do? is there a pit,bootloader,csc,phone etc files that i can flash through odin rather than flashing a complete package through PDA?
or can i just flash boot.img from a stock rom using PDA and you guys think that will solve the problem>?
Click to expand...
Click to collapse
I've been having the exact same problem as you with my S7500L. Boot loop error after installing custom roms. I can, however, install CWM and obtain root without problems.
I really don't understand how the s7500L rom guys developed them... how did they get out of the boot loop.
I tried replacing the boot.img from the custom ROM with one from a stock rom... nothing.
Corsario_Negro said:
I've been having the exact same problem as you with my S7500L. Boot loop error after installing custom roms. I can, however, install CWM and obtain root without problems.
I really don't understand how the s7500L rom guys developed them... how did they get out of the boot loop.
I tried replacing the boot.img from the custom ROM with one from a stock rom... nothing.
Click to expand...
Click to collapse
Hi i have the same problem and the solution is flash this http://forum.xda-developers.com/showthread.php?t=2255561
i used odin, and works perfect.
i installed the cwm and i cant enter recovery it sthows a trinagle sith ! ander the samsung and after it boots normaly
vasilisaerox said:
i installed the cwm and i cant enter recovery it sthows a trinagle sith ! ander the samsung and after it boots normaly
Click to expand...
Click to collapse
Just flashed recovery and i'm having the same issue. Original 2.3.6 installed never touched.

[Q] Hydro Rom and CWM

Good Morning,
After searching all of 100 pages in the post for the Hydro rom I have a question that I didnt find in the thread.Im on latest JB/OTA update for my TF300t and I have flashed the CWM recovery after unlocking my bootloader.Now,I want to install the latest Hydro rom but the developer is suggesting the latest TWRP for the rom.
My question is,will i be able to flash the rom using CWM or do I have to use twrp?If so will i end up with a brick if i side load twrp along cwm?
The only place i didnt check is the youtube video instructions since im on a restricted network...
Anyone?
Im really itchy to flash the new rom I just need to know if i can flash both cwm and twrp or if it is safe with cwm already installed to flash twrp on top of it.
sapaira said:
Anyone?
Im really itchy to flash the new rom I just need to know if i can flash both cwm and twrp or if it is safe with cwm already installed to flash twrp on top of it.
Click to expand...
Click to collapse
It is an either or situation. There is one recovery partition and you can have stock, cwm, or twrp. You can't have more than recovery installed at a time.
There are a lot of issues being reported with cwm recently. Since the op says twrp I used twrp. It may or may not work with cwm.
Be aware that a backup made with cwm probably won't restore with twrp or the other way around.
Good Luck!

Rooting latest update with CF-Auto-Root

Hi,
Getting my Samsung Galaxy Tab 2 10.1 tomorrow.
Planning on rooting right away with CF-Auto-Root.
Is this guide correct:
http://android.pandaapp.com/news/12...msung_Galaxy_Tab___P_GUIDE.shtml#.UNgpPHdn0r4
Do I need to install CWMrecovery before? Or can I do that more easily after I have rooted. I intend to make a Nandroid backup of my device.
Thank you.
Hi,
Can the 'stock recovery' that CF-Auto-Root installs make a Nandroid backup of my device?
Or do I need to install CWM ROM Manager after I have used CF-Auto-Root to root?
Thank you.
Run cf auto root, then your version of clockwork mod. If you do it backwards, you will end up with stock recovery flashed over clockworkmod. Good luck.
Sent from my Rezound using Tapatalk 2
Thanks, all done.
But after I made my Nandroid backup, CWM gave me a message that my device might reflash stock recovery. It said fix it but I said no...
How do I know if I'm still running CWM as my recovery? If I'm not, does that make my Nandroid backup useless if anything goes wrong?
Thanks.

[Q] Problems after flashing ROM-Samsung Tab 3 sm-t311

Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Backup
anthony239 said:
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Click to expand...
Click to collapse
try fixing permissions in cwm/twrp ,if it does not help then restore your nandroid backup or ask the rom developer for the problem..
it might help you
roshan77ss said:
try fixing permissions in cwm/twrp ,if it does not help then restore your nandroid backup or ask the rom developer for the problem..
it might help you
Click to expand...
Click to collapse
Hi, thanks for replying. I cannot post in the topic of the rom because I am new on the forum (what I get when I try to post something overthere).
Could you please explain me how to fix the permissions in CWM?
I am a beginner who been trying to fix his tablet for a week now, but I still dont understand everything since I cant put all my time on it... If its not about following tutorials step by step, i am lost...
I also tried the fast team one, without any success, when the rom is installed and the device is rebooted, this time the screen stay blocked on "samsung galaxy tab3" for years!!!
sorry, i meant the fast dream rom
I just tried to Flash three roms from sammobile.com (one from hong-kong, one from spain and one from germany) through Odin.
Everytime I get I click on AP to load the rom on odin, I get this message:"md5 error! Binary is invalid".
Since I have rooted the tablet using odin to instal CWM, when I boot the tablet in download mode, I can see:
- PRODUCT NAME: SM-T311
- CURRENT BINARY: Cusom
- SYSTEM STATUS: Custom
Is it related? Someone help plz...
The question is do i really have to install a new rom, now that the tablet is rooted with CWM on it, can't do any manipulation to allow the chinese rom to accept google playstore etc...
My biggest problem with the chinese rom that comes with it is that i cant install download google playstore, i installed it but everytime i open it, it closes right away. Not google nor other google apps available neither since it was sold in china...
anthony239 said:
Hi, thanks for replying. I cannot post in the topic of the rom because I am new on the forum (what I get when I try to post something overthere).
Could you please explain me how to fix the permissions in CWM?
I am a beginner who been trying to fix his tablet for a week now, but I still dont understand everything since I cant put all my time on it... If its not about following tutorials step by step, i am lost...
Click to expand...
Click to collapse
You should be able to post on ROM forum now(as you've reached 10 posts.
And the fix permissions option should be in 'advanced' section in CWM(not sure, I use TWRP recovery)
The Dork Knight Rises said:
You should be able to post on ROM forum now(as you've reached 10 posts.
And the fix permissions option should be in 'advanced' section in CWM(not sure, I use TWRP recovery)
Click to expand...
Click to collapse
Yea im able to post over there now, thx
backup
anthony239 said:
The question is do i really have to install a new rom, now that the tablet is rooted with CWM on it, can't do any manipulation to allow the chinese rom to accept google playstore etc...
My biggest problem with the chinese rom that comes with it is that i cant install download google playstore, i installed it but everytime i open it, it closes right away. Not google nor other google apps available neither since it was sold in china...
Click to expand...
Click to collapse
dont you have cwm backup? if not then flash stock firmware ,find proper odin flashable packages for your device.
always make backup before flashing any rom.
anthony239 said:
Yea im able to post over there now, thx
Click to expand...
Click to collapse
So, could the devs help??
(<---And you don't need to say thanks and spam the thread, that what the button's for)
The Dork Knight Rises said:
So, could the devs help??
(<---And you don't need to say thanks and spam the thread, that what the button's for)
Click to expand...
Click to collapse
In the end, I just used a previous version of Odin (3.4 instead of 3.9) to flash an original stock rom.
Now the problem is that I have a new CWM that works with the volume up, volume down button, and this menu:
- reboot system now
- apply update from ADB
- apply update from external storage
- zipe data/factory reset
- wipe cache partition
- apply update from cache
Since the rom is not really good, i wanted to flash another one (one of those we just talked about), but the backup i did with the previous CWM i had (Philz Advanced CWM 6.08.90) is nowhere in the tablet anymore (i dont have any sd card) and i dont know how to make a back up with this CWM...
So now the question is how to make a backup with this version of CWM so I can try to flash other roms, or how to get the version that i had before without takin any risk of brickin the device (so i can make another backup and try to flash another)
anthony239 said:
In the end, I just used a previous version of Odin (3.4 instead of 3.9) to flash an original stock rom.
Now the problem is that I have a new CWM that works with the volume up, volume down button, and this menu:
- reboot system now
- apply update from ADB
- apply update from external storage
- zipe data/factory reset
- wipe cache partition
- apply update from cache
Since the rom is not really good, i wanted to flash another one (one of those we just talked about), but the backup i did with the previous CWM i had (Philz Advanced CWM 6.08.90) is nowhere in the tablet anymore (i dont have any sd card) and i dont know how to make a back up with this CWM...
So now the question is how to make a backup with this version of CWM so I can try to flash other roms, or how to get the version that i had before without takin any risk of brickin the device (so i can make another backup and try to flash another)
Click to expand...
Click to collapse
Are you sure the new recovery is CWM and not stock recovery?? If you flashed stock ROM, it should've given you stock recovery again...
(Does it show the CWM hat logo in the background?)
The Dork Knight Rises said:
Are you sure the new recovery is CWM and not stock recovery?? If you flashed stock ROM, it should've given you stock recovery again...
(Does it show the CWM hat logo in the background?)
Click to expand...
Click to collapse
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
anthony239 said:
Hi, I have bought a samsung tab 3 sm-t311 in China and since they everything related to google, I rooted it and installed CWM,
I installed this rom here with CWM: http://forum.xda-developers.com/showthread.php?t=2404877
Installation was successful but I get this messages when launching my device:
- setup wizard isn't responding. Do you want to close it?
I close it, then:
- Unfortunately, the process android.process.media has stopped.
I press ok, then:
Unfortunately, Samsung keyboard has stopped.
I press ok then:
- Process system isn't responding. Do you want to close it?
I press ok
And it keeps coming back over and over...
What should I do?
Click to expand...
Click to collapse
Try fix or patch.
Or come back to stock rom.
anthony239 said:
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
Click to expand...
Click to collapse
Yup, I think you'd better to start over again. Try take a look at this : http://forum.xda-developers.com/showthread.php?t=2401901
It works well for my SM-T311 :good: Then you can reroot and make a backup from TWRP easily.
I also suggest you to take a look at this too : http://forum.xda-developers.com/showthread.php?t=2522091 From there, you can get PhilZ touch recovery based on CWM v.6.0.4.5
anthony239 said:
Actually, yea its the stock recovery, so should i reroot the phone to install CWM, make a backup just in case, flash another stock rom which i find better, and then try to flash this one in recovery mode?
Click to expand...
Click to collapse
That's right, look at @Ferris Cruiser's post above. Should help.
(<---Remember to thank him and me if this helps.:good
Ok, my problem is resolved now.
- I had to use the previous version of Odin (3.4) to flash a rom from sammobile.com
- Then, I rooted the phone, reinstalling CWM philz version
- I did a backup using CWM
- Finally I flashed the custom rom using CWM
Thank u all for helping
anthony239 said:
Ok, my problem is resolved now.
- I had to use the previous version of Odin (3.4) to flash a rom from sammobile.com
- Then, I rooted the phone, reinstalling CWM philz version
- I did a backup using CWM
- Finally I flashed the custom rom using CWM
Thank u all for helping
Click to expand...
Click to collapse
Glad to help! :good:
HELP
I bought a Samsung Galaxy Tab 3 SM-T311 in Mainland China last month and I cannot install google play can anyone help.

[Q] want to install new rom problem with recovery version

want to install new rom problem with recovery version. I have galaxy ace 5830. i want to install cmm11 in it but cmm11 require CWM 6.0.5.3. but in my phone it is showing as cwm 5.0.2.6. if any one can help with it??
vinod113 said:
want to install new rom problem with recovery version. I have galaxy ace 5830. i want to install cmm11 in it but cmm11 require CWM 6.0.5.3. but in my phone it is showing as cwm 5.0.2.6. if any one can help with it??
Click to expand...
Click to collapse
Here is the flashable zip for cwm 6.0.5.3 make sure your phone is "5830" and NOT "5830i" before flashing.

Categories

Resources