Database Info

My Universal is stoped after KDSkamal's üni Wm6 beautiful edition. Pls help me!!!

Pls help me.. What shud ı do? after wm6 beautiful edition, my üni is stopped. Now it doesnt open. only it can be hard reset and than doesnt open again...

erdem_das said:
Pls help me.. What shud ı do? after wm6 beautiful edition, my üni is stopped. Now it doesnt open. only it can be hard reset and than doesnt open again...
Click to expand...
Click to collapse
Hi,
Put the device into BootLoader (Hold the BackLight & power Button whilst pressing reset) then re-flash your device.
If that still does not work then try re-creating your partition table.
Cheers,
Beast

Try to recharge the device, it happened to me too, the battery drained out.

wakko said:
Try to recharge the device, it happened to me too, the battery drained out.
Click to expand...
Click to collapse
ı dont believe it (my battery is good)....
and thank u very much beast0898... ı will try it then ı reply u...

thanks thanks thanks....
thank u very much beast0898... my problem is solved... u are really best friend...

my wriless doesnt work!!!
Now my üni is ok but wriless doesnt work... I flashed one more time with different version again doesnt work what can ı do?

erdem_das said:
Now my üni is ok but wriless doesnt work... I flashed one more time with different version again doesnt work what can ı do?
Click to expand...
Click to collapse
Go back to WM5 - you obviously haven't read enough to move to WM6

TehPenguin said:
Go back to WM5 - you obviously haven't read enough to move to WM6
Click to expand...
Click to collapse
I've turned back to wm5. but still does not work ...

tehpeng.
TehPenguin
Senior Member
Is it really true? i mean this is crazy. is this not a forum where people are helping eachother? try to answer to help instead of considering yourself such a master of everything. Or even better, dont bother to reply if everyone but yourself are such newbies. It isnt really the first time i see you go about in the forums picking on people for really no reason and for noo good.
Or let me know if this really is the forum where one asks a question and it is not replied but one gets bullied instead.
Teh, remember that you was about to do it to me until you found out that i was right on the sms-beep thingy.
behave.
thats my 2 cents.

HELP I9003 Dead after flash with i9000 ROM..

phone status:cannot go in recovery mode and downloading mode.i plug in the usb to pc it will out OMAP3630 driver..and i search all website also did hv this driver...but my phone is dead...all dead...any 1 can help me solution?

is it lighting up at all..i mean does keys and all light up on powering on?

Has you used the comb keys?
Volume up+home+power for recovery mode
Volume down+home+power for download mode
The usb drivers comes with samsung kies package.
Enviado desde mi GT-I9000 usando XDA Premium App

i will suggest to make a usb jig or buy one. The procedure to make it is available here. Search it. And u will be able to get into download mode and flash a stock i9003 firmware (also available here). Samsung service center will definitely refuse to give warranty. so i suggest u use this method. And here is a video link to how to create an usb jig. Its really easy if u have the tools
hxxp://www.youtube.com/watch?v=Rdn5GoRjhn0

That wasn't very clever was it? It's very silly of Samsung to make these phones sound similar, yet they are very, VERY different. There is basically no hardware inside the i9000 which is the same as the i9003. Please refrain from doing stupid things like this in the future, you will only end up with a very fancy paperweight. The main reason your phone won't boot is that the i9000 bootloaders are probably flashed to your phone. I'm not sure if a USB Jig will fix this :\

PaulForde said:
That wasn't very clever was it? It's very silly of Samsung to make these phones sound similar, yet they are very, VERY different. There is basically no hardware inside the i9000 which is the same as the i9003. Please refrain from doing stupid things like this in the future, you will only end up with a very fancy paperweight. The main reason your phone won't boot is that the i9000 bootloaders are probably flashed to your phone. I'm not sure if a USB Jig will fix this :\
Click to expand...
Click to collapse
Agreed. you need pure stupidity to do this.

oo god i did the same thing.
Any Fix available??
PLEASE HELP!!!!

Remove the battery and leave it out for about 1 minute. Then with the back still of look to the right of the camera and there is a small recesed hole, stick a pin in this and hold down for about 30 seconds. That worked for me when i had a similar problem,

PaulForde said:
That wasn't very clever was it? It's very silly of Samsung to make these phones sound similar, yet they are very, VERY different. There is basically no hardware inside the i9000 which is the same as the i9003. Please refrain from doing stupid things like this in the future, you will only end up with a very fancy paperweight. The main reason your phone won't boot is that the i9000 bootloaders are probably flashed to your phone. I'm not sure if a USB Jig will fix this :\
Click to expand...
Click to collapse
thank you very much comment.but i just get it to warranty...samsung service just flash it.now all is done.

ngagegames said:
thank you very much comment.but i just get it to warranty...samsung service just flash it.now all is done.
Click to expand...
Click to collapse
what did you tell in the samsung service to allow your warranty.. cause im experiencing your problem and im having thoughts that samsung service here will not accept my phone's warranty bcause of reflashing issues

ngagegames said:
phone status:cannot go in recovery mode and downloading mode.i plug in the usb to pc it will out OMAP3630 driver..and i search all website also did hv this driver...but my phone is dead...all dead...any 1 can help me solution?
Click to expand...
Click to collapse
JTAG can do the fix check procedures .
http://www.ort-jtag.com/blog/?e=30
Best regards
Oz

ngagegames said:
phone status:cannot go in recovery mode and downloading mode.i plug in the usb to pc it will out OMAP3630 driver..and i search all website also did hv this driver...but my phone is dead...all dead...any 1 can help me solution?
Click to expand...
Click to collapse
it is pure stupidity to do that. well done.

chachu2 said:
oo god i did the same thing.
Any Fix available??
PLEASE HELP!!!!
Click to expand...
Click to collapse
HahahHahahahahh trollolololololol.....!
Lol..... Rofl lmao! Lol!
Epic fail guys.....
Who the hell is your idea of buying this phone and flashing i9000 firmware???
Read all the questions and answers threads search around! Use search tool! :O
I request mods to kindly close this thread or better please delete this!
Tapashocked via my gt-I9003 with a random keyboard of my choice !

Electroboy said:
JTAG can do the fix check procedures .
http://www.ort-jtag.com/blog/?e=30
Best regards
Oz
Click to expand...
Click to collapse
I am sure that the noob you helped will find your answer very important, four months after the mess.
Before reply, do check the date. After this, the mods, if any, can close this stupid thread.

is usb jig working on dead i9003???
---------- Post added at 12:18 PM ---------- Previous post was at 12:15 PM ----------
pliz u all help me,, my galaxy sl was dead and i dont have any waranty left...anybody can help me .. plizzz (sorry for my bad english)

can you please upload a pic form it? i can not find where is it?

describe what you did

my galaxy sl have problem about flashing i9003 rom,im searching the solution ,then i found the forum that give the link to download the firmware..i forgot the link.. i download it and flash it with odin,, then my phone was dead.. cannot do anything.. cannot on .cannot go to download mode,and recovery..i know about jtag ,but in my country there's no jtag service, and did usb jig can fix this???

Go to service centre!!!!!!
I did the same mistake with my new device.....i told service centre that while i was operating it just crashed......they kept my phone for a month and then cha:nged my motherboard........just go service centre and give same reason.....

plz help me for break i9003

i want flash i9003!!!and Wrong i Shed file i9000 now my phone(i9003)trun off
and now not trun on plz help me What I do؟؟؟؟؟plz
and iam so sorry for one Question open new post
excuse me

Theres no solution sir.. Just go to nearest service center in your area...
Sent from my GT-I9003 using xda premium

Wonder what demon would possess you to do such a thing, Congratulations, you have an expensive paperweight.

throw it from the roof to break it

miladfergie said:
i want flash i9003!!!and Wrong i Shed file i9000 now my phone(i9003)trun off
and now not trun on plz help me What I do؟؟؟؟؟plz
and iam so sorry for one Question open new post
excuse me
Click to expand...
Click to collapse
don'T lose hope try a jig , or remove battery hold 3 buttons and connect to USB, later insert the battery should work.
Sent from my GT-I9003 using XDA App

thanks
Thank you
not other way ?
i can change bord??
if i change it mobile Right?
excuse me i cant good speak english

miladfergie said:
thanks
Thank you
not other way ?
i can change bord??
if i change it mobile Right?
excuse me i cant good speak english
Click to expand...
Click to collapse
try jig or rff cables
or give to samsung service centre

miladfergie said:
i want flash i9003!!!and Wrong i Shed file i9000 now my phone(i9003)trun off
and now not trun on plz help me What I do؟؟؟؟؟plz
and iam so sorry for one Question open new post
excuse me
Click to expand...
Click to collapse
thats the dumbest thing any1 can ever do !! READ THE FORUMS IF UR NEW !! READ THE FEEDBACK AND THEN FLASH !!! GOD !!!

shriomman said:
thats the dumbest thing any1 can ever do !! READ THE FORUMS IF UR NEW !! READ THE FEEDBACK AND THEN FLASH !!! GOD !!!
Click to expand...
Click to collapse
This guys english is pretty lousy.... he got an excuse for not understanding, do you have one for scaring him off right of the bat?
Sent from my GT-I9003

plz now tell me
my phone(i9003) Right/Healthy?????tnx

This guy is clearly a deep noob. He would not understand even if you make videos of what to do.
EDIT: follow this video procedure: http://www.youtube.com/watch?v=Rdn5GoRjhn0
once you enter "Download mode" you can flash a i9003 stock rom to your bricked device. If this does not work, bring the mobile to samsung assistance.

miladfergie said:
plz now tell me
my phone(i9003) Right/Healthy?????tnx
Click to expand...
Click to collapse
If you put it in a proper diet , probably even make it exercise daily for 2 hours on a treadmill , then yes it will be healthy ----Err, In all serious aspect.
Get it checked at the samsung service center, Period. There is no hope, Clearly if he is a deep noob what ever you are about to tell him will fly over his head. Or worse case scenario probably ignite his house trying to build a jig kit.

i make it and 301 Ohm but mobile not go to downladoding

usually your kind of brick can be recovered by jig. Try again or buy one from ebay.
If it still fails, you have to bring it to the samsung service. if they investigate they will easily recognize your crazy attempt to flash i9000 rom on it. Sometimes they ignore and repair it (even if they have seen the mess caused by the user), sometimes they repair but ask for reparation cost since the warranty is void.
Good luck, next time first read, understand and then flash. Flashing is a risky procedure and one must knows what he is doing.

i life to iran and give mobile to samsung service
but samsung service say not way Except change bord
i cant thanks becuse my limited to five thanks per day
thanks not other way?

Throw it down it ll break your mobile :-D
In pieces
Sent from my GT-I9003 using xda premium

anigr88 said:
Throw it down it ll break your mobile :-D
In pieces
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
ok but go on with box liff ??????????

miladfergie said:
ok but go on with box liff ??????????
Click to expand...
Click to collapse
ok buddy. I understand that u are a new to android & to flashing. Generally flashing is very advanced procedure. So u have to research alot about it before attempting such flashing. There is a FAQ thread in forum. Read it 2-3 times in depth to understand basics of flashing, modding. Even if u dont undestand some points then post ur questions in Q and A thread. We will clear ur doubts there. But dont creat new thread especially for new questions.
Now about ur problem i will just say that plz dont do any experiement further & straight a way go to samsung centre & give ur mobile to them. Tell a fake story that while updating from kies by mistake computer turned off so now phone is not starting. In one or two day u will get mobile repaired. Flashing i9000 rom to this mobile is common mistake done by new members. So dont wory about ur mobile. But from next time dont do the mistake again.

vishal24387 said:
ok buddy. I understand that u are a new to android & to flashing. Generally flashing is very advanced procedure. So u have to research alot about it before attempting such flashing. There is a FAQ thread in forum. Read it 2-3 times in depth to understand basics of flashing, modding. Even if u dont undestand some points then post ur questions in Q and A thread. We will clear ur doubts there. But dont creat new thread especially for new questions.
Now about ur problem i will just say that plz dont do any experiement further & straight a way go to samsung centre & give ur mobile to them. Tell a fake story that while updating from kies by mistake computer turned off so now phone is not starting. In one or two day u will get mobile repaired. Flashing i9000 rom to this mobile is common mistake done by new members. So dont wory about ur mobile. But from next time dont do the mistake again.
Click to expand...
Click to collapse
now i go to samsoung serveis
and Telling them mobile itself shut down
i lie to Them?????

well, if you act there like you are doing here (noob), maybe they trust you.
Give a try, you have nothing to lose.

(help) dead xperia miro

hey
guys i need help ,,, my sony xperia miro is dead no red /green/blue light just giving me nothing it is not working at all even when i connect it to pc / charger
i tried to flash ftf but i couldn't , my laptop doesn't recognize the phone
the bootloader is unlocked , my phone is rooted . so using sony pc companion isn't going to work (i tried)
i used to run Jelly Bean Mini Project Release 5| Android 4.1.2 FOR MIRO/TIPO/J
guys u r my last hope .... thanks in advance
guys i installed PCC now yes it isn't reading my phone but now when i connect my phone my laptop recognize it as zeus flash device !! what's goin on ?
is there any chance to fix it !!!!!!!!!

francois90 said:
hey
guys i need help ,,, my sony xperia miro is dead no red /green/blue light just giving me nothing it is not working at all even when i connect it to pc / charger
i tried to flash ftf but i couldn't , my laptop doesn't recognize the phone
the bootloader is unlocked , my phone is rooted . so using sony pc companion isn't going to work (i tried)
i used to run Jelly Bean Mini Project Release 5| Android 4.1.2 FOR MIRO/TIPO/J
guys u r my last hope .... thanks in advance
Click to expand...
Click to collapse
u got urself a hardbricked miro my friend, best advice is to send it to your local sony service centre..

adiyoe said:
u got urself a hardbricked miro my friend, best advice is to send it to your local sony service centre..
Click to expand...
Click to collapse
Damn
thanks for replying friend

yw be careful next time when modding ur device..

adiyoe said:
yw be careful next time when modding ur device..
Click to expand...
Click to collapse
yeah man i am afraid i have to
is there any chance to fix it myself ?

any suggestions ?

Flashtool or SUS would work, happened to my XJ once and I lost hope but tried lots of time and got it to work :good: hope the same happens to you
And when it gets fixed make backups before flashing any stuff

fonetalker101 said:
Flashtool or SUS would work, happened to my XJ once and I lost hope but tried lots of time and got it to work :good: hope the same happens to you
And when it gets fixed make backups before flashing any stuff
Click to expand...
Click to collapse
the laptop dosen't recognize my device , i tried flashtool & SEUS but it's not working my cell phone dosen't respond to anything no led, no vibration just nothing , like i am leaving the battery out , what do u think ?? thanks

Hmmm. Well this happend to my brother's Xperia Tipo before, I brought it to Sony to get fixed which is real bad since they will know you modified your phone and drop the verdict that is no longer recoverable however after bringing it to the local black market they managed to get it fixed and working with one small problem which is that the Internal SD Card is dead, I am talking about the one in the phone the Internal Storage and is not mounted at all times
I hope this won't happen to your phone but if it does well it's a lesson to be careful when modding phones and tweaking system files
Hit thanks If I Helped

fonetalker101 said:
Hmmm. Well this happend to my brother's Xperia Tipo before, I brought it to Sony to get fixed which is real bad since they will know you modified your phone and drop the verdict that is no longer recoverable however after bringing it to the local black market they managed to get it fixed and working with one small problem which is that the Internal SD Card is dead, I am talking about the one in the phone the Internal Storage and is not mounted at all times
I hope this won't happen to your phone but if it does well it's a lesson to be careful when modding phones and tweaking system files
Hit thanks If I Helped
Click to expand...
Click to collapse
yeah man , that's actually a tough lesson
i am wondering if i can follow the instructions here http://forum.xda-developers.com/showthread.php?t=1849170
i am leaving the phone on the wall charger for a day and half but till now ... nothing !

Umm Don't do that since that's total nonsense and charging won't do it any good, as of the moment overcharging the battery won't work, I suggest use an original Sony Cable and a different PC

fonetalker101 said:
Umm Don't do that since that's total nonsense and charging won't do it any good, as of the moment overcharging the battery won't work, I suggest use an original Sony Cable and a different PC
Click to expand...
Click to collapse
i'll give it a try then i will let u know , i really do hope it works ,thanks for your fast replies man really appreciate it

francois90 said:
i'll give it a try then i will let u know , i really do hope it works ,thanks for your fast replies man really appreciate it
Click to expand...
Click to collapse
but do u think it might work without having any LED ? , i mean getting into flashmode without having any sort of light ?

francois90 said:
but do u think it might work without having any LED ? , i mean getting into flashmode without having any sort of light ?
Click to expand...
Click to collapse
Still getting NOTHING

guys seriously any solutions ???
thanks

francois90 said:
guys seriously any solutions ???
thanks
Click to expand...
Click to collapse
Go to Sony service center.
Sent from my C1604 using Tapatalk

Well, Ask these questions to yourself before going to Sony
Did I try using a different Computer / USB Cable?
Did I try repeating flashing and reading threads related to unbricking?

fonetalker101 said:
Well, Ask these questions to yourself before going to Sony
Did I try using a different Computer / USB Cable?
Did I try repeating flashing and reading threads related to unbricking?
Click to expand...
Click to collapse
tried everything , all i get now is zeus flash device on pc nothing else no LED no vibration ...nothing, i called sony service center to ask them what to do they said they will change the
mother board which will cost 75% of the device price i am thinking of buying samsung galaxy grand these days ...

hey guys
just letting u know that i gave my xperia miro to a non-official service center today
they told me they will flash it on SEtool dunno if this gonna work or not , i will tell u what happened tomorrow when i get the phone , wish me luck

I could help you
francois90 said:
hey guys
just letting u know that i gave my xperia miro to a non-official service center today
they told me they will flash it on SEtool dunno if this gonna work or not , i will tell u what happened tomorrow when i get the phone , wish me luck
Click to expand...
Click to collapse
Hello, did you fixed?
I could help you.

Huawei p8 max stuck...:crying::crying: First of all i really appreciate admin to make

:crying::crying:
First of all i really appreciate admin to make this wonderful and helpful app thanks a lot
Now my request to all the senior members please help me to resolve this issue...
Unfortunately I format every thing in TWRP recovery mode in my huawei p8max, and now I'm unable to get original frimware that's DAV-701LV100R001C199B006
I Search every where but i could not found this
I tried a lot of others frimware but nobody support my device i contact to huawei customer service but they refused
Is there any Hope for me
Please help me I'm very sad
Sorry for my language problem

Help me please........please... please
Usman Aajiz said:
:crying::crying:
First of all i really appreciate admin to make this wonderful and helpful app thanks a lot
Now my request to all the senior members please help me to resolve this issue...
Unfortunately I format every thing in TWRP recovery mode in my huawei p8max, and now I'm unable to get original frimware that's DAV-701LV100R001C199B006
I Search every where but i could not found this
I tried a lot of others frimware but nobody support my device i contact to huawei customer service but they refused
Is there any Hope for me
Please help me I'm very sad
Sorry for my language problem
Click to expand...
Click to collapse
please try to rescue me

Usman Aajiz said:
:crying::crying:
First of all i really appreciate admin to make this wonderful and helpful app thanks a lot
Now my request to all the senior members please help me to resolve this issue...
Unfortunately I format every thing in TWRP recovery mode in my huawei p8max, and now I'm unable to get original frimware that's DAV-701LV100R001C199B006
I Search every where but i could not found this
I tried a lot of others frimware but nobody support my device i contact to huawei customer service but they refused
Is there any Hope for me
Please help me I'm very sad
Sorry for my language problem
Click to expand...
Click to collapse
Usman Aajiz said:
please try to rescue me
Click to expand...
Click to collapse
Yo, am sorry for that.
If you really really can't find the official firmware in here, then it's obvious to get your phone repaired with Huawei service centre.
I bet they do have the official firmware for all the device including yours, I suggest you to visit the nearest Huawei SC. and get your phone repaired. That's all.

sachin n said:
Yo, am sorry for that.
If you really really can't find the official firmware in here, then it's obvious get you phone repaired with Huawei service centre.
I bet they do have the official firmware for all the device including yours, I suggest you to visit the nearest Huawei SC. and get your phone repaired. That's all.
Click to expand...
Click to collapse
Thanks dear Friend... But im confused may be they refused because of TWRP and they can ask how come you can do this with our products... So in this case I haven't any Answer

Usman Aajiz said:
Thanks dear Friend... But im confused may be they refused because of TWRP and they can ask how come you can do this with our products... So in this case I haven't any Answer
Click to expand...
Click to collapse
Just act like noob in front of em.
Just say I dunno how it's happened blah blah.. Lol, that'll works. :silly:

sachin n said:
Just act like noob in front of em.
Just say I dunno how it's happened blah blah.. Lol, that'll works. :silly:
Click to expand...
Click to collapse
Thanks dear for suggestions now I visit care center very soon with a lot of confidence and say this was not my mistake i gust power off my set and put on charging and your bull ****t software gime

Usman Aajiz said:
Thanks dear for suggestions now I visit care center very soon with a lot of confidence and say this was not my mistake i gust power off my set and put on charging and your bull ****t software gime
Click to expand...
Click to collapse
Yes LOL!
Goodluck :good:

sachin n said:
Yes LOL!
Goodluck :good:
Click to expand...
Click to collapse
You Always Welcome:highfive: