Hi there,
since I am not (yet) allowed to directly post into the developer fora I'll try my luck with this one here.
My first attempt was the installation from here. Everything worked fine but I got stuck within the cyanomod boot screen - nothing helped: No wiping with factory reset + wiping cache nor flashing twice afterwards. Also none of the tips mentioned elsewhere did work out.
Then I tried the files and installation from here. I strictly used the files for Badadroid (not the NAND-Version) but Badadroid got stuck within the XDA boot screen. After nearly 10 minutes of waiting I rebooted into recovery mode where I was presented with lots of error messages of missing files and mounts (I can retry and provide all of them). Installing the zip failed afterwards.
Now I tried boot files and FOTA from first attempt with zImage and zip of 2nd one. After flashing red output showed loadfile ERR (not found) and system did not even boot into XDA boot screen of Badadroid.
I always chose LSI + BOOT checked + Full Download checked and flashed both in combination.
Now even Bada 2.0 does not boot anymore and my Wave gets stuck in a reboot loop. After Wave startup screen only a scrambled screen is shown where nothing can be recognized! Will try to flash latest Bada Version on Phone again (while I do not know how to get the file on the phone!)!
Does anybody have a helpful hint on how to flash which combination of files in order to get a working Badadroid version with latest possible Android version?
Many thanks in advance!
Bye
Solved
Ok, finally got it to work. After reflashing a new Bada onto my no more working phone I downloaded and reinstalled everything from CM11 again.
Now Wave boots fine into both OS versions. Unfortunately CM11 seems to be little bit unstable since it often crashes for example when using the browser.
But so far it is really impressive and exciting! Thanks to all involved for that great work! Really awsome!
Related
Hi,
I have a Samsung GIO S5660 (no carrier, no lock or branding or something, originally GB 2.3.4, stockware updated to 2.3.6), rooted and installed Clockworkmod Recovery (5.0.2.6) and followed the instruction to the letter when I tried to install an ICS ROM: this one here.
I tried others too. But unfortunately the result is the same everytime. Installation successfully completes, wipe data / factory reset (tried that several times before and after installing). And when rebooting, the SamsungMobile logo is shown, the screen flashes white for a split second and goes dark but is obviously still powered up (glows a little). And then nothing happens. I have to remove the battery to bring it back to life then, which right now is of course nothing more then another reboot into recovery.
Any ideas? Am I using the wrong ROM versions? It says something about format failed when doing the wipe because of missing ext4 access ... ?! Do I have to use a different CWM Recovery? But I do use the one mentioned and linked to in the tutorial ...
Regards,
Mac
Uhm, I just had to wait a little longer for the ROM to start up. Sorry, ROM works alright.
Mac
While I was playing with my TF700 the other day I accidentally put it upside down resulting in pressing (& holding) the power bottom & volume down .. the device restarted into "Safe Mode"
I tried to get rid of it, but apparently I did something stupid which resulting in boot logo loop (the device is stuck at the second ASUS screen and refuses to boot)
* Note my device is Unlocked & I'm running the latest CleanRom version and I am kinda' experienced user :silly:
Anyway I googled this and I tried the following steps with NO success:
- Cold boot
- Wiping caches
- I also tried to re-flash a rom
which left me only with formatting & wiping data, BUT I tried this thing and it actually worked!
From TWRP I restored my last back up (which was a bit old) But whatever, It actually worked! and I have no problems whatsoever, everything seems to run as before, I also tried to reboot the device and it's still working!
I felt I should share this info with you, it might help someone :highfive:
Hi all
I’m a complete noob at this and it seems like I have got myself into a bit of a pickle. Sorry for the massive description but I thought it would make it easier to get a good answer.
My Phone:
Samsung Galaxy S4 GT 19505 LTE
PDA I9505XXUEMK8
CSC I9505BTUEMK5
MODEM I9505XXUEMK8
I successfully rooted my phone using Odin. In Odin I added the "CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5" file to the PDA field then rebooted the device. Then I added the "openrecovery-twrp-2.6.3.1-jfltexx" file to the PDA field, rebooted the device and the phone automatically opened in TWRP recovery. In recovery mode I wiped the cache, system and dalvik cache. I then went to install, browsed to the "I9505 Official_Google_Edition_4.3_by_Jamal2367_Finaly_v2.0" file on my SD card, rebooted the device and the Google logo came up on the screen for a few minutes and all was good. Got my new ROM, ran a root checker and all was good.
After some research I decided I wanted to use the Pacman ROM as it seemed to a lot more customisable. Using the same method I went to TWRP recovery wiped the cache, system, and dalvik cache. I then went to Install, browsed for the pacman ROM and the Gapps file on my SD card and everything installed ok, the phone restarted and the pacman logo came up everything was fine. Although I did notice on start up that I got this message.(and have had this error message ever since)
kernel is not seandriod enforcing
set warranty bit : kernel
After using the Pacman ROM for a day I noticed a lot of bugs like my apps would disappear, I couldn't use my banking apps and my phone was generally performing very badly. So I decided to remove the ROM and use CyanogenMod ROM under the recommendation of a friend. So again I pressed home+power+vol up to enter recovery mode but this time it didn’t enter the TWRP recovery it entered the stock recovery mode. This was slightly concerning but I proceeded to use the list menu and cleared the cache etc, browsed the SD card and went to the CyanogenMod 10.2 ROM I previously downloaded. It began to install but in red I got the error message stating that I didn’t have the right permission or signature. The phone rebooted back to the Pacman ROM. I tried the above three times and it still continued to boot back into Pacman ROM sometimes I struggled to even get back into recovery mode.
Soooooo I decided to try and go back to the Google Edition 4.3 ROM and play it safe, using the method from my first paragraph. But when it installed through TWRP I got an error message saying cant find MD5 file. The device rebooted and the Google edition logo came up on the screen but it seems to be locked in a loop. The Google logo wont go away and the phone vibrates once then three times quickly every 10 seconds.
I can still enter both TWRP recover and Download Mode. But I don’t want to mess around with it anymore without getting some advice. Any help would be much appreciated as I really need my phone working.
Thanks again
Aiden
Did you create a backup while on your first run with google edition? If so wipe cache, system, and dalvik and restore to your backup. Should put you back to where you began.
Sent from my LGMS769 using XDA Premium 4 mobile app
I know I should, but I didnt. Is it still fixable ?
*Update*
Couldnt help myself had to have a tinker around. Managed to get Cyanogenmod 10 working with Gapps. Gonna see how I get on with this. Although still would like to know I have been having all these problems.
Sometimes things just dont go as planned: p I have easily soft bricked my phone around 10 times and always able to fix it. You really should have made a stock backup before flashing anything. I recommend doing it now so you at least have a known working configuation backed up for future use. Trust me backups are your friends!
Sent from my LGMS769 using XDA Premium 4 mobile app
Thanks for your replies.
Ye gonna that right now Cyan Mod so far is running very smooth without any problems.
Regards
Aiden
Hello to everyone, posting this here as I don't have access to ask in the forum post for BlissPop - I.E fresh user
I'm having issues with my "recalled" shield tablet (wifi), I had it flashed to BlissPop successfully previously but when I tried reflashing it the other day I was met with a major roadbump: It just won't load the ROM.
The tablet freezes at the screen following the installing and optimization of each application - basically my screen is stuck at a small wall of text saying the following:
"BlissPop is starting...
Powered by Team Bliss
Starting apps.
Please wait for the optimization process to finish."
And before you ask, yes I have waited long enough (left it on through the night just to be sure - this thing won't load).
My procedure is as follows.
Bootloader is CWM and it is rooted beforehand.
1st off going into recovery mode.
#2 Wipe data/cache/dalvik cache - done
#3 Installed BlissPop via sideload, then gapps_pico afterwards (I've tried wiping cache+dalvik before installing gapps to no help.)
#4 Rebooting from CWM, here I've tried both allowing and denying CWM to "fix" root settings.
I've tried the first ROM I installed (when wifi/lte versions were available) and the newer releases - same problem with both.
After this I am met with this screen that won't budge, anyone got a possible solution to this issue?
Hey I just received my replacement tablet and was going through this process too. I did some digging around and found / remembered that having an external SD card socketed can cause this problem. So I powered my device off, removed the card and then rebooted without major issue.
Hope this helps.
I don't have any SD card in my tablet though, thanks anyways.
Did you format system?
If not then do format system/data/cache
Sent from my P4S using Tapatalk
Tried doing a format of system as well as data/cache/dalvik, still getting same result :/
Not sure its still helpful or not...i saw the xda thread regarding to this thread and whoever tried to flash the last zip got stuck at boot. So I'm guessing if you will flash a different one (by this time maybe they upload a new one) maybe you could get rid of it..
Sent from my P4S using Tapatalk
When I switched to BlissPop I had to format /data because TWRP was unable to wipe it. TWRP offers that option unter "advanced wipe". Might be the same with CWM.
any help my phone stuck on this boot loop and i dont know what to do now , any fix ? i dont wanna have broken phone i did everything that u guys said nothing works
Hi all,
well, to be honnest I already posted my story in the help thread but no answer came so I try with a new thread
We'll see if I'm luckier this way !
a few weeks ago I broke my screen and decided to change it myself.
Everything went fine (even restarted successfully my phone before applying the tape to fix the screen) until I finally tried to restart my phone after the repair is done.
Since then I'm not able to turn on my phone
Holding the power button starts fastboot mode, UP + power doesn't do anything and DOWN + power enters recovery. Weird !
Another weird thing: it only works if I'm not plugged. When I'm plugged nothing ever happens.
I suspected I could have damaged buttons or cables. I have looked carefully but nothing appears to be broken.
Here is what I already did without any result:
- I had access to the original recovery so wiped the cache
- I tried to recover the phone but that did not work so
- I installed twrk using adb (like here)
- and then installed the rom as explained here (I used the last release here, so it should be cm-13.0-20160819-SNAPSHOT-ZNH5YAO0IN-bacon.zip). It seemed to work but finally no, same situtation
- I tried this but so far not able to get the qualcomm port listed once the phone is on. It may be related to the fact that I have to unplug to boot it but I always got a Android bootloader interface listed.
Any idea someone ?
Thank you very much for your help !
Did you try to "fastboot reboot" while in fastboot mode?
Try flashing a CM14 rom. Mine came with CM12 so I tried flashing back to CM11 and I did flash it successfully through Fastboot but alas it won't boot. The boot logo loads but then I'm introduced to a black screen.. So I flashed back to a (at that time the latest stable) CM12.1 but same result. And I got worried. Then I decided to flash a CM13 rom which was a beta build (at that time newly released Android 6) and it booted into it alright! So I suggest flashing a CM14 and let me know how it does.
The problem seems be much deeper than just a broken screen. It may sometime affect the chipset of the cellphone.
For that we can't do anything.
For now you can try the following things :
1 . Flash the latest Cyanogen Firmware from the same place you have downloaded the snapshot cm13.
2. Flash recovery (TWRP) using adb.
3. Wipe
-System
-Data
-Cache and Dalvik Cache
4. Flash the latest Cyanogen Rom .
5. Boot into recovery.
6. Flash some gapps as per the Android version.( Open Gapps I recommend)
7. Boot back to recovery .
8. Boot into System.
This is the max you can do for now.
You can also check device forums for recovering from a bricked device post.
Go through the post and check if any symptoms matches yours. You'll find the answer right away.
And the last option you can do is going to service center, they will charge you mostly (even if in warranty as you have yourself tampered hardware of the phone.)
Hope it will help. Thanks