Hi,
I'm trying to install the weekly update 06092014 from androidarmv6 on my galaxy gio gt-5660 cm11-nightly-20140830-gio.zip with cwm-6.0.5.3 and it fail with status 7.
Anyone know if there is an updated cwm version?, i try to find it on jenkis site with no luck.
Thanks a lot
Solved i have to download the full rom zip and flash it from recovery and it works if i use the incremental one it dead with error 7.
Hope help.
Related
Hi there,
I know there are a lot of topics about this issue, but I was not able to find anything to fix this.
I have:
gt-p3100 with 4.1.1 stock rom
3.0.31-321289 kernel
SuperSU v1.94
CWM 6.0.2.7 (latest version I was able to get from the CWM app)
want to install 4.4.2 slim or omni rom - but getting Status 7 errors
removing the section in install script doesn't work for me - installation aborts instead of status 7 error
anything else I can try?
TWRP better that CWM?
c-tec said:
Hi there,
I know there are a lot of topics about this issue, but I was not able to find anything to fix this.
I have:
gt-p3100 with 4.1.1 stock rom
3.0.31-321289 kernel
SuperSU v1.94
CWM 6.0.2.7 (latest version I was able to get from the CWM app)
want to install 4.4.2 slim or omni rom - but getting Status 7 errors
removing the section in install script doesn't work for me - installation aborts instead of status 7 error
anything else I can try?
TWRP better that CWM?
Click to expand...
Click to collapse
Try updating your recovery to the latest from Android-Andi http://forum.xda-developers.com/showthread.php?t=2548257 or http://forum.xda-developers.com/showpost.php?p=47964256 Should be good to go.
Thx
CSP III said:
Try updating your recovery to the latest from Android-Andi http://forum.xda-developers.com/showthread.php?t=2548257 or http://forum.xda-developers.com/showpost.php?p=47964256 Should be good to go.
Click to expand...
Click to collapse
Thanks updated the CWM fixed it!
Why isn't this version available from the official App? This sucks!
Thanks a lot!
Hello guys,
I have always rooted and flashed my device according to this community and I am very grateful of the info here . I own a galaxy s2 at&t (sgh-i777)
and I have currently flashed a CM11 rom nightly compiled with linaro and sabertooth ... After getting some bugs with it I wanted to flash another CM11 rom and I followed all the steps as always and I got this status 7 error . I read here that it was a rom problem but when I tried to flash the same CM11 rom that was flashed on my device it gave the same error about operation aborted and again status 7 error .
So I wanted to ask will this "deleting the assert files on the rom components" fix the problem?
wrong rom flashing?
Galaxy.orion said:
Hello guys,
I have always rooted and flashed my device according to this community and I am very grateful of the info here . I own a galaxy s2 at&t (sgh-i777)
and I have currently flashed a CM11 rom nightly compiled with linaro and sabertooth ... After getting some bugs with it I wanted to flash another CM11 rom and I followed all the steps as always and I got this status 7 error . I read here that it was a rom problem but when I tried to flash the same CM11 rom that was flashed on my device it gave the same error about operation aborted and again status 7 error .
So I wanted to ask will this "deleting the assert files on the rom components" fix the problem?
Click to expand...
Click to collapse
yes it would solve the problem...is there any possibility you are trying to flash a rom that is not made for your device?
No I checked it
kostoulhs said:
yes it would solve the problem...is there any possibility you are trying to flash a rom that is not made for your device?
Click to expand...
Click to collapse
No I checked it several times . I did delete the lines and flashed and it did work thnx for the response
I have a p3113 ,as evryone suggested i tried a lot of p3110 lolipop roms.
Recently i tried to flash cm11 unoffcial version of android andi.
It says it cant flash the rom and says error in the zip file and( error 7 ) in recovery.
All this happens only for a kitkat rom but i can flash any other version of android like lolipop or jb.
Pls help me ..currently im on cm9 official build for p3113. I have a cwm recovery,version 6
update your revovery, you can download zip here: https://www.androidfilehost.com/?w=files&flid=25706 Flash it and reboot recovery, then it should work fine
iks8 said:
update your revovery, you can download zip here: https://www.androidfilehost.com/?w=files&flid=25706 Flash it and reboot recovery, then it should work fine
Click to expand...
Click to collapse
Thanks got it..
switch to TWRP
I would alse recomend TWRP. In my opinion runs better than cwm
Hi. I'm new to XDA forums and I'm trying to resolve some problems with CM12.1 and OpenGapps. I would appreciate if someone could point me in right direction
Device:
Galaxy Tab 3 10.1 p5210 WiFi
Steps taken so far:
Followed this thread
Flashed TWRP Galaxy Tab 3 10.1 Wifi 2.8.7.1 twrp-2.8.6.0-p5210-v2.tar with Odin (TWRP)
Flashed ROM with ROM - Beta 2 (20151120) cm-12.1-20151120-UNOFFICIAL-p5210.zip
Flashed Houdini for Android 5.0 (20150521) houdini-5.0-20150521.zip
Then tried to flash OpenGapps x86 5.1 with TWRP.
Problem:
open_gapps-x86-5.0-full-20160124.zip fails to install with error code: 12
Your recovery does not support stdin for the tar binary. please update your recovery to the latest version or switch to another like TWRP.
-NO changes were made to your devices
Installer will exit now...
E: Error executing updater binary in zip '/data/media/0/open_gapps-x86-5.1-full-20160124
Error flashing zip '/data/media/0/open_gapps-x86-5.1-full-20160124
Expected result:
Successful installation of Open Gapps
Rootedhook said:
Hi. I'm new to XDA forums and I'm trying to resolve some problems with CM12.1 and OpenGapps. I would appreciate if someone could point me in right direction
Device:
Galaxy Tab 3 10.1 p5210 WiFi
Steps taken so far:
Followed this thread
Flashed TWRP Galaxy Tab 3 10.1 Wifi 2.8.7.1 twrp-2.8.6.0-p5210-v2.tar with Odin (TWRP)
Flashed ROM with ROM - Beta 2 (20151120) cm-12.1-20151120-UNOFFICIAL-p5210.zip
Flashed Houdini for Android 5.0 (20150521) houdini-5.0-20150521.zip
Then tried to flash OpenGapps x86 5.1 with TWRP.
Problem:
open_gapps-x86-5.0-full-20160124.zip fails to install with error code: 12
Your recovery does not support stdin for the tar binary. please update your recovery to the latest version or switch to another like TWRP.
-NO changes were made to your devices
Installer will exit now...
E: Error executing updater binary in zip '/data/media/0/open_gapps-x86-5.1-full-20160124
Error flashing zip '/data/media/0/open_gapps-x86-5.1-full-20160124
Expected result:
Successful installation of Open Gapps
Click to expand...
Click to collapse
Hi and welcome to XDA.
As you're recieving help in this thread http://forum.xda-developers.com/and...ntinuation-t3098071/post64994739#post64994739 I'll close this one. Your device section is located here if you need it. http://forum.xda-developers.com/galaxy-tab-3/help
Good luck
Thread closed.
hi all,
I have Samsung Tab 2.7.0 P3100 and an year back i installed CM10. I think i have done some mistake while updating from CM 10 to CM latest version. I have wiped the date and cache.I have the ZIP files (CM 10 and GAPPS) in external memory. when i am trying to install the CM11 it is showing "INSTALLATION ABORTED with error number 7". But when I am trying to install GAPPS it completed successfully.
can someone please help me here to get my tab back in working condition ..!!!
Wondering, is it possible to install the Samsung normal OS back again ?
Any help on this issue is much appreciable.
Thanks
Shibin Shah K J
sskj said:
hi all,
I have Samsung Tab 2.7.0 P3100 and an year back i installed CM10. I think i have done some mistake while updating from CM 10 to CM latest version. I have wiped the date and cache.I have the ZIP files (CM 10 and GAPPS) in external memory. when i am trying to install the CM11 it is showing "INSTALLATION ABORTED with error number 7". But when I am trying to install GAPPS it completed successfully.
can someone please help me here to get my tab back in working condition ..!!!
Wondering, is it possible to install the Samsung normal OS back again ?
Any help on this issue is much appreciable.
Thanks
Shibin Shah K J
Click to expand...
Click to collapse
Any help ....????
sskj said:
Any help ....????
Click to expand...
Click to collapse
you should upgrade your recovery too. try twrp 3.0.2-3 from here https://www.androidfilehost.com/?fid=24591000424954613
and install it with your current recovery. make a reboot back into recovery.
wipe dalvik, cache, system and format data http://andi34.github.io/faq/faq_twrp.html
make a new reboot into recovery and install your rom and gapps.
OK
johneflik said:
Redowload the ROM again it might be corrupt and use the exact gapps
Best ROM for your tab is omni 4.4.4 or cm13 or omni 6.0.1
Just the latest TWRP go wipe then advanced wipe then wipe everything except the external SD. Install install your chosen ROM flash the equivalent gapps, flash super user update reboot you are done. all what you need is here in Andoid-Andi files http://andi34.github.io/
Click to expand...
Click to collapse
sskj said:
hi all,
I have Samsung Tab 2.7.0 P3100 and an year back i installed CM10. I think i have done some mistake while updating from CM 10 to CM latest version. I have wiped the date and cache.I have the ZIP files (CM 10 and GAPPS) in external memory. when i am trying to install the CM11 it is showing "INSTALLATION ABORTED with error number 7". But when I am trying to install GAPPS it completed successfully.
can someone please help me here to get my tab back in working condition ..!!!
Wondering, is it possible to install the Samsung normal OS back again ?
Any help on this issue is much appreciable.
Thanks
Shibin Shah K J
Click to expand...
Click to collapse
don't flash a separate supersu.zip if you would install cm13. supersu causes bootloops on cm13.
if you need root access on cm13, go to dev.-options and enable root access. set it to "apps and adb"
thats all.
cm13 is pre-rooted, so no need for flashing supersu.zip
OK
johneflik said:
[MENTION=457974].. yes you are right about super user. I think pmni6.0.1 needs a super user to be flashed. Any way I have seen SU on cm13 and no problem at all... Untill now. Do I need to remove it or keep the root access from dev tools disabled.
Click to expand...
Click to collapse
omni6 need supersu right.
if supersu are working on cm13 by Markox89 for you everything is fine. i would keep the root access from dev.-options disabled