Related
Hello,
I'm new to flashing and installing ROM on android phones.
I enabled root in this phone.
I wanted to install JellyBean 4.2.2.
After a long search on the internet and a lot of trying I decided to open a thread here.
My phone is Star N800 MTK6575 with Android 4.0.4.
When I tried to install ROM through recovery mode it showed me this:
"Failed to verify whole-file signature"
I tried to install ClockWorkMode Recovery without success
SP flash tool and Odin also disappointed me..
Could anyone help me please?
Maybe I did something wrong, can you please explain me step by step how to upgrade this phone?
Please help me, every answer will be appreciated.
Thank you!
I think I found the problem.
When I plug in my phone in the usb, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?
Dont alter the zip,
in cwm toggle off the sign verification,then try flashing..:thumbup:
SENT FROM MONSTER ! ! !
HIT THANX OR I WILL JUST
CRY...
I don't have CWM, I have a regular android recovery mode..
I can't flash anything with it..
HELP ME PLEASE :crying:
Sel0x said:
HELP ME PLEASE :crying:
Click to expand...
Click to collapse
Hi, If u want to flash anyting from SP flash tool .Den follow these things.....Turn off ur phone with sim card,batter,and sd card out....Also make sure that u have installed mtk6575 drivers installed already....After that load everthing in sp flash tool and before clicking on download button..just press and hold volume up key and then insert usb in port...ur pc will detect the phone and install recovery or Rom........I also faced the same problem but this thing really helped me to install ROM
Hi,
Could You provide me that 4.2.2 ROM for N800 MTK6575, please.
I have a "brick" what needs a firmware...
Thanks,
Please help me to fix my MT6589 HTC ONE clone. I factory reset my mobile. Then wipe cache using cwm. then restart. now its totally bricked. its not even charging. can't on. no light. no vibration. no recovery mode. even pc cant recognize the device. please help me to fix it. i just bought it. only a week.
I have the exact same problem, except my PC still recognizes it, I can't do anything else.
I'm not even able to make MTK tools nor SPFT recognize my phone...
A bit of help would grandly be appreciated :fingers-crossed:
Regards.
did you find an answer
dhcj said:
Please help me to fix my MT6589 HTC ONE clone. I factory reset my mobile. Then wipe cache using cwm. then restart. now its totally bricked. its not even charging. can't on. no light. no vibration. no recovery mode. even pc cant recognize the device. please help me to fix it. i just bought it. only a week.
Click to expand...
Click to collapse
I saw on another forum that you solved your problem. Could you tell me how you did it?
fixed it.
boulabloubla said:
I saw on another forum that you solved your problem. Could you tell me how you did it?
Click to expand...
Click to collapse
Hi everyone.
sorry for late reply.
I used this rom.
download from here.
pan.baidu.com/share/link?shareid=519096060&uk=1966208364
try it. if its not working I will explain step by step how i did it.
:good:
Sorry I couldn't answer earlier, I was kinda busy.
Thank you for your help, I'll try it and get back at you right away.
Cheers.
So, I tried the ROM, but it doesn't work, it gives me a message like Error DRAM (4032).
Could you explain me a little more please?
Thank you
boulabloubla said:
So, I tried the ROM, but it doesn't work, it gives me a message like Error DRAM (4032).
Could you explain me a little more please?
Thank you
Click to expand...
Click to collapse
can you sent me a picture of your mobile. i want to check is it same as mine.
Here they are.
step by step
boulabloubla said:
Here they are.
Click to expand...
Click to collapse
Okay. its exactly same as mine.
go to this link and download the .rar file.
dropbox.com/s/066vyfzgxe5b5fa/MT6577_root_tools_pack.rar
1.
there is a pdf file. read the pdf file carefully and follow the Step 1 only. (USB Drivers Installation) make sure you have install the drivers correctly.
download the original ROM.
dropbox.com/s/8kv93irrp8o8cpm/one%20english.rar
2.
Unplug the phone. open the folder named "SP_Flash_Tool" from the MT6577_root_tools_pack.
open "Flash_tool.exe" go to option selec "USB mode".
Select the scatter file from the original ROM. (second link)
SP_Flash_Tool -> Flash_tool.exe -> Scatter-loading -> MT6589_Android_scatter_emmc.txt
Then click "Format"
Format -> Automatic format flash -> Format whole flash except bootloader -> OK
then connect the switch offed phone. (it will automatically format the phone.)
After its done disconnect the phone.
close the SP_flash_tool.
3.
Unplug the phone. open the folder named "SP_Flash_Tool" from the first download.
open "Flash_tool.exe" go to option selec "USB mode".
Select the scatter file from the original ROM. (second link)
SP_Flash_Tool -> Flash_tool.exe -> Scatter-loading -> MT6589_Android_scatter_emmc.txt
then click " Firmware upgrade"
then connect the switch offed phone. (it will automatically upload the files to phone.)
it will take few minutes. then unplug the phone.
now try to switch on!
hope it will work for you.
good luck
:good:
Thanks for the help.
I did not entirely followed what you had, but I was able to flash the ROM you gave, thank you again good sir :laugh:, and I hope it will be useful for someone else.
Good day! :good:
boulabloubla said:
Thanks for the help.
I did not entirely followed what you had, but I was able to flash the ROM you gave, thank you again good sir :laugh:, and I hope it will be useful for someone else.
Good day! :good:
Click to expand...
Click to collapse
can you use your phone now?
Hello everyone, I have a problem with a htc one of my friend. the phone has no operating system, no longer appears when you turn on anything. how can I do to flash boot, recovery, and all the rest?
the phone will not turn off, you have to wait for it drains the battery.
I apologize for my English
thanks
Bricked HTC one clone MT6589
Hello everybody!
I have the same issue my HTC One clone MT6489 does not work since I flashed the boot image (I know...).
I have followed all the steps mentionned above and my screen stays back when I reboot.
Maybe I misse sonething.
Anybody can help?
D.
Reboot loop
To be more precise, any boot image or wahtever I put, I have a reboot loop...
sir i have a hard time following the concern , after choosing the scatter "MT6589_Android_scatter_emmc.txt" then try to press the download button it seems download not starting. can you help me with this sir?
after of a purple loading its stock from 0% loading, and no yellow loading.
Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
cilig said:
Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
Click to expand...
Click to collapse
http://www.android-hilfe.de/root-cu...nmod-10-1-u8666e-entwicklung-eingestellt.html
a ROM for Huawei ascend y210-0200
to all developers out there someone plz help me on my huawei ascend y2010-0200 phone coz it crashes all of my system app and user app .. i cannot open my phone and stock on logo .. plz help how to recover and repair my phone .. huhuhu T_T
Can you enter recovery mode?
Via [email protected]
same device
IceTe said:
Can you enter recovery mode?
Via [email protected]
Click to expand...
Click to collapse
Hi. Have the same device. But it's almost dead. No recowery((. ( Was updating via update.app on sd card but missed the sing that it's for my modification of model.
So now it's just flashes lights and connects too PC as some two ports. One is in download mode I think, QPST telling so.. athor I think for some backups.. But I don't know what to do about this ports.. even can't find native firmware.
Simple question is. can I somhow install recowery thru update.app file? Phone is still processing this file, becouse it creates update.log, but with error (maybe if original fw then it just helps, but I still can not find it) or where I can download or even buy native firmware updater?
Maybe is some software that can help thru PC? QPST is powerfull but I miss much knolage(((((((((
Appreciate help
cilig said:
Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
Click to expand...
Click to collapse
https://www.dropbox.com/s/xcmmed4kmn90lry/Y210D stock firmware B869.7z?dl=0
here you are bro my CWM backup of version B869 for Y210D..Also here bro is my other things dumped stock recovery img for this phone flash it with fastboot https://www.dropbox.com/s/a2pltlxuse3sfpo/recovery210d.img?dl=0 also here are my bro adb and fastboot drivers for huawei if this ones dont work just install with kingoroot https://www.dropbox.com/s/37mn5bnkkg4fuh6/Huawei-ADB-FastBootdrivers.zip?dl=0
And use minimal adb and fastboot to do flashing with fastboot..To go into fastboot mode use this first disable fastboot in settings then turn off phone.remove bat,after 5 sec reinsert bat and then turn on phone and when huawei shows release power button and press and hold volume down for 10sec-whatever you think best then connect to pc phone with usb cable and to go to recovery do "adb reboot recovery" from adb or just do same as for fastboot but with pressing volume up instead of volume down button or power up with holding both power and volume up i really dont know but somehow figured out.But before all you know for sure that when youre restoring cwm backup you need to put into "sdcard/clockworkmod/backup" folder from that zip file when you unpack it you will find this folder with date in name and just put it there..And then before doing restore make sure you did wipe data,wipe catche,dalvik catche and format only sistem partition..Here is also https://www.dropbox.com/s/jygfnjygepl2jzd/cwm-oneclick-install.zip?dl=0 cwm recovery for this device
engineeravp said:
Hi. Have the same device. But it's almost dead. No recowery((. ( Was updating via update.app on sd card but missed the sing that it's for my modification of model.
So now it's just flashes lights and connects too PC as some two ports. One is in download mode I think, QPST telling so.. athor I think for some backups.. But I don't know what to do about this ports.. even can't find native firmware.
Simple question is. can I somhow install recowery thru update.app file? Phone is still processing this file, becouse it creates update.log, but with error (maybe if original fw then it just helps, but I still can not find it) or where I can download or even buy native firmware updater?
Maybe is some software that can help thru PC? QPST is powerfull but I miss much knolage(((((((((
Appreciate help
Click to expand...
Click to collapse
i got the same problem. is there any solution by now? please help..
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Can you boot into download/odin mode?
Hi I have the solution !!!
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Download this file
Code:
https://www.mediafire.com/?2dkdp5etfa9g2by
copy this file to your sd card..
then boot your phone normally and it will go into cwm mode as you mentioned ...
Select apply update zip from sd card...
Select the file you downloaded...
If it prompts select yes.... Your phone will boot into normall mode....
If you want all your contacts and smses backup you can do this by mobogenie software...
Hope it helps... if not message me... And dont forget to press thnx..
Yes
Kobro said:
Can you boot into download/odin mode?
Click to expand...
Click to collapse
Yes i can go to downloading mode but unfortunately odin can`t detect my phone.
Thanks Buddy
Thank you So much, let me give it a shot and let you know
sturkish said:
Yes i can go to downloading mode but unfortunately odin can`t detect my phone.
Click to expand...
Click to collapse
Then maybe its a driver problem? try downloading "samsung drivers for mobile phones", maybe that will let you get into odin and flash a stock rom.
Cant enter cwm recovery
Anyone can help me,i cant enter cwm recovery even though i press volume up + power + home button.If anyone have any idea tell me pls!!! thx alot!!!:crying:
OP Junior said:
Anyone can help me,i cant enter cwm recovery even though i press volume up + power + home button.If anyone have any idea tell me pls!!! thx alot!!!:crying:
Click to expand...
Click to collapse
wrong procedure bro..
power+home+vol up..hold them together and when phone vibrates then leave the power button but keep on holding the volume up and home button..you will go into you recovery. .
hit thanks ..it will motivate me..dont hesitate..
---------- Post added at 11:29 AM ---------- Previous post was at 11:24 AM ----------
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
hey..just do one more thing in addition with all the things you have done
reflash cwm recovery using odin..but this time tick on auto reboot option..
n u r done!
if it worked please let me know..
and press thanks bro it will motivate me to help out severel peoples who messed up with their phone..
i 8552 stucks on samsung logo
hello all of u i done all as well as u tell above but now i face another problem while i reeboot the set it stucks on samsung logo & mtp drivers are not installing on my system . so due to mtp not installed odin is not working odin i am showing screen shoots of odin
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
after this it is doing nothing
please help me what to do
solution dint work
hi i tried with the file uv mentioned in the mediafire . but still im stuck in cwm mode .. when ever i boot it takes me to cwm mode ... please help ....
solution
gthm.dman said:
hi i tried with the file uv mentioned in the mediafire . but still im stuck in cwm mode .. when ever i boot it takes me to cwm mode ... please help ....
Click to expand...
Click to collapse
im good in English but i can help you, will dont use "reset to bootloader" using CWM, using "volume down+home+power" after the release power and while still holding volume down+home when you got in bootloader now connect your device in ODIN 3.07 it will detected now, change your recovery.tar.md5 using odin, i hope it will work
Didn't work!
archr3d said:
im good in English but i can help you, will dont use "reset to bootloader" using CWM, using "volume down+home+power" after the release power and while still holding volume down+home when you got in bootloader now connect your device in ODIN 3.07 it will detected now, change your recovery.tar.md5 using odin, i hope it will work
Click to expand...
Click to collapse
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
hello developers,
I have rooted mu samsung galaxy grand quattro. After that I have restored the system to factory reset. And from that time my system is in only CWM recovery. I have shown my phone in the service center as well. Those people are helpless. I guess my OS is missing. Please help me out.
And Thanks a Lot for this wonderful community and your endless support.
Legit Solution
sturkish said:
Hi, Can`t find any solution in any threads or posts. My phone is stuck in CWM Recovery v6.0.4.5. Every time I reboot the phone it directly goes to CWM Recovery. Tried almost every possible way but no results. Help would be well appreciated.
Thanks
Click to expand...
Click to collapse
Hi there,
I just recently experienced this nightmare where I tried to factory reset my GT-I8552 and all went wrong. As u menioned,my device too got stuck into cwm recovery mode 6.0.4.5.
I searched the whole internet but to no avail. then i thought that my cwm might hv curropted or damaged.So i downloaded the stock cwm for GT-I8552 and flashed it using odin and say what..... my device booted normally!!
Hope this helps!
Currently i cannot send u the link but u can find the stock cwm for gt-i8552 from google!
@parth3399
swapnilsj said:
hello developers,
I have rooted mu samsung galaxy grand quattro. After that I have restored the system to factory reset. And from that time my system is in only CWM recovery. I have shown my phone in the service center as well. Those people are helpless. I guess my OS is missing. Please help me out.
And Thanks a Lot for this wonderful community and your endless support.
Click to expand...
Click to collapse
Flash the cwm compactible to ur device using odin.... Worked for me !
I have also same issue and still stuck with this... please help..
bbsankarreddy said:
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
Click to expand...
Click to collapse
:
i have also same issue and i'm still stuck with this... please help .. i have install lot of drivers but the device did not detect in odin mode... need solution please
this helped me.
forum.xda-developers.com/showthread.php?t=2494471
Hi. I fixed mine by flashing cwm again but this time by ticking the Auto Reboot.
same problem here could you find any solution??
bbsankarreddy said:
It's not working...
See.. The phone is booting directly to the CWM recovery..
ADB is working fine... I tested few commands using the cmd prompt and everything was fine..
After the phone enters Downloading mode,Odin couldn't recognize it...
I think Its because the Samsung Mobile USB CDC Composite Device divers are not properly installed in my PC ...
I tried everything to install it but I keep getting the "This device cannot start .Code 10" error...
So,Let me know how to fix this error...And that will solve the problem,I guess..
Thanks.
Click to expand...
Click to collapse
hey, I am also facing with exact same issue, as I had cosmic ROM installed when i did factory reset from inside ROM it has stuck in bootloop in CWM and not even ODIN is able to recongnize it. I have tried lots of CDC drivers too, it recognizes my phone as LEmobile... I am stuck quite badly please help!!!!!!!!!!!!!!!!!!
heelp!
me too
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
f_magsi said:
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
Click to expand...
Click to collapse
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
thanks brother, it worked.
f_magsi said:
thanks brother, it worked.
Click to expand...
Click to collapse
I'm glad to see your device is working again. Please post the screenshot here.
mvikrant97 said:
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
Click to expand...
Click to collapse
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
f_magsi said:
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
Click to expand...
Click to collapse
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
mvikrant97 said:
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
Click to expand...
Click to collapse
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
w1n73rf3ll said:
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
Click to expand...
Click to collapse
I don't have Chimera tool to test.
Why do you need the chimera tool?
its a phone repair program ... i tried with others tools and no luck