Is it possible to have BLN without a custom kernel like mosh?
I had many SOD's on mosh but I really like the BLN feature when I have my phone on silent.
allard1997 said:
Is it possible to have BLN without a custom kernel like mosh?
I had many SOD's on mosh but I really like the BLN feature when I have my phone on silent.
Click to expand...
Click to collapse
I don't think so
Related
Does anyone knows if there's a app that works with ics for the led notification led?
BLN control is not working on ics
EDIT:
I use the kwiboo rom and kernel
BLN works fine, but you have to use NSTOOLS to enable it
Greetz
frutelaken said:
BLN works fine, but you have to use NSTOOLS to enable it
Greetz
Click to expand...
Click to collapse
Oke thanks! I will give it a try
I have installed nstools and bln. But in nstools it says status not available and blink status not available. I have give me phone a reboot.
i think the kwiboo kernel does not support bln
Use Francos kernel.
Greetw
Use Matrix kernel
Sent from my Nexus S using XDA App
frutelaken said:
Use Francos kernel.
Greetw
Click to expand...
Click to collapse
`
Thanks! Use the francos kernel now
Ever since i shifted to ICS roms i can't get BLN to work with any ROM or kernel combination. I have used Glados, Franco, SG, Matrix, Speedy with CodeAndroid, AOSP+, Brainmasters ICS v6, AOKP. But it has never worked. It used to work properly on gingerbread. I have flashed rom by doing complete wipes.
You must use NSTool (https://market.android.com/details?id=mobi.cyann.nstools ) to activate BLN
benoit2600 said:
You must use NSTool (https://market.android.com/details?id=mobi.cyann.nstools ) to activate BLN
Click to expand...
Click to collapse
i have used nstools and everything in there is on, BLD and BLN. its still not working.
sagarpruthi said:
i have used nstools and everything in there is on, BLD and BLN. its still not working.
Click to expand...
Click to collapse
I've used ICUP Kernel before and NStools and it worked good. Try re-flashing kernel or updating to newer version?
corgan1001 said:
I've used ICUP Kernel before and NStools and it worked good. Try re-flashing kernel or updating to newer version?
Click to expand...
Click to collapse
i tried all versions and all possible combinations. i am right now in the middle of a complete wipe and install. also BLD and BLN work together right?
sagarpruthi said:
i tried all versions and all possible combinations. i am right now in the middle of a complete wipe and install. also BLD and BLN work together right?
Click to expand...
Click to collapse
Seemed to, I had it dim the keys after 500 ms (I don't really care for them and don't need to see them to use them), and BLN for notifications. I used NStools to configure both of these options, but that was several NStools updates ago. At the time I was using Nexus Beam with ICUP speedy 3, but I've since moved on to CM9.
***Edit***
I did notice depending on the configuration that certain timing settings would not work properly, dunno why. Could have just been the way I had it set up.
corgan1001 said:
Seemed to, I had it dim the keys after 500 ms (I don't really care for them and don't need to see them to use them), and BLN for notifications. I used NStools to configure both of these options, but that was several NStools updates ago. At the time I was using Nexus Beam with ICUP speedy 3, but I've since moved on to CM9.
***Edit***
I did notice depending on the configuration that certain timing settings would not work properly, dunno why. Could have just been the way I had it set up.
Click to expand...
Click to collapse
Can u share your setup?
sagarpruthi said:
Can u share your setup?
Click to expand...
Click to collapse
Link to kernel (updated since last used)
http://forum.xda-developers.com/showthread.php?t=1401455
Link to ROM (updated since last used)
http://forum.xda-developers.com/showthread.php?t=1380608
NStools had BLD set to 500ms, BLN enabled
Didn't really change much else, no custom overclock settings or anything like that.
Matr1x also worked well for me on various ROMs I sampled
http://forum.xda-developers.com/showthread.php?t=1361477
Since I moved to CM9 I am just using the CM kernel, it doesn't have all the configurable options that the others did, at least not yet.
Hi,
I just flashed *Matr1x* v23.5BLN kernel for BLN support, but it does not work on my Nexus S i9023. I tried BLN control and NSTools for activation, but without any success.
Does anyone have experiences with BLN with the same configuration?
Thanks in advance
gilbert089 said:
Hi,
I just flashed *Matr1x* v23.5BLN kernel for BLN support, but it does not work on my Nexus S i9023. I tried BLN control and NSTools for activation, but without any success.
Does anyone have experiences with BLN with the same configuration?
Thanks in advance
Click to expand...
Click to collapse
That's my same issue.
BLN can be set with some difficulties on JB.
In my case, I'm using Marmite kernel. BLN works, but I cannot keep the lights on.
... indeed: in testing mode within BLN control, lights go on but not when
a call or sms come in I think the best thing is to move from
factory to CyanogenMod or another custom ROM
BLN problem
gilbert089 said:
... indeed: in testing mode within BLN control, lights go on but not when
a call or sms come in I think the best thing is to move from
factory to CyanogenMod or another custom ROM
Click to expand...
Click to collapse
Correct!
I'm using stock OTA 4.1.2 and matr1x 23.5 kernel, flashed using TWRP recovery, installed busybox, activated through NSTools.
BLN works excellent on SMS and missed calls. Blinking works fine too, OC 1.2ghz works fine also.
ej8989 said:
I'm using stock OTA 4.1.2 and matr1x 23.5 kernel, flashed using TWRP recovery, installed busybox, activated through NSTools.
BLN works excellent on SMS and missed calls. Blinking works fine too, OC 1.2ghz works fine also.
Click to expand...
Click to collapse
I did nearly the same: self-installed stock 4.1.2 via update from 4.1.1, CWM recovery, DooMLoRD_v4_ROOT-zergRush-busybox-su - will try CyanogenMod M2 today
The subject is on.
Any solution to get BLN with CM kernel?
Sensitivity said:
The subject is on.
Any solution to get BLN with CM kernel?
Click to expand...
Click to collapse
CM kernel already has BLN included IIRC. You can use Devil Tools, NSTools and many other software to control it.
polobunny said:
CM kernel already has BLN included IIRC. You can use Devil Tools, NSTools and many other software to control it.
Click to expand...
Click to collapse
BLN control said it's not..
Sensitivity said:
BLN control said it's not..
Click to expand...
Click to collapse
Because BLN control can control Neldar implementation only as far as I'm aware. BLN in CM is CM own implementation which differs a bit. Use another software, or through an init.d script.
polobunny said:
Because BLN control can control Neldar implementation only as far as I'm aware. BLN in CM is CM own implementation which differs a bit. Use another software, or through an init.d script.
Click to expand...
Click to collapse
and you know what app can i use to blinking notification with BLN?
Try nstools
Sent from my ns4g using Tapatalk 2
I really miss the 33R option to change the screen gamma etc, but I dont want to lose performance or add bugs by flashing a custom kernel like franco
Would be awesome if someone made a stock kernel+color settings :good:
The changing of intensity/hue/etc is in the userspace, not kernel space. See franco's reply,
That's all userspace stuff, Kernel code is unchanged. The Color Enhancement feature should be enough to take care of everything automatically for you.
Click to expand...
Click to collapse
In other words, CM removed it from their ROMs. A lot of OPO roms sync their ROMs in line with CM11.
zephiK said:
The changing of intensity/hue/etc is in the userspace, not kernel space. See franco's reply,
In other words, CM removed it from their ROMs. A lot of OPO roms sync their ROMs in line with CM11.
Click to expand...
Click to collapse
Soo I can't change it with root or scripts?
Overdose1986 said:
Soo I can't change it with root or scripts?
Click to expand...
Click to collapse
At least not to my knowledge. I know its a bummer right?! Intensity/hue/contrast/etc was AWESOME.
Does anyone know why CM removed this feature so shortly after its introduction?