Does anyone knows if there's a app that works with ics for the led notification led?
BLN control is not working on ics
EDIT:
I use the kwiboo rom and kernel
BLN works fine, but you have to use NSTOOLS to enable it
Greetz
frutelaken said:
BLN works fine, but you have to use NSTOOLS to enable it
Greetz
Click to expand...
Click to collapse
Oke thanks! I will give it a try
I have installed nstools and bln. But in nstools it says status not available and blink status not available. I have give me phone a reboot.
i think the kwiboo kernel does not support bln
Use Francos kernel.
Greetw
Use Matrix kernel
Sent from my Nexus S using XDA App
frutelaken said:
Use Francos kernel.
Greetw
Click to expand...
Click to collapse
`
Thanks! Use the francos kernel now
Related
Ever since i shifted to ICS roms i can't get BLN to work with any ROM or kernel combination. I have used Glados, Franco, SG, Matrix, Speedy with CodeAndroid, AOSP+, Brainmasters ICS v6, AOKP. But it has never worked. It used to work properly on gingerbread. I have flashed rom by doing complete wipes.
You must use NSTool (https://market.android.com/details?id=mobi.cyann.nstools ) to activate BLN
benoit2600 said:
You must use NSTool (https://market.android.com/details?id=mobi.cyann.nstools ) to activate BLN
Click to expand...
Click to collapse
i have used nstools and everything in there is on, BLD and BLN. its still not working.
sagarpruthi said:
i have used nstools and everything in there is on, BLD and BLN. its still not working.
Click to expand...
Click to collapse
I've used ICUP Kernel before and NStools and it worked good. Try re-flashing kernel or updating to newer version?
corgan1001 said:
I've used ICUP Kernel before and NStools and it worked good. Try re-flashing kernel or updating to newer version?
Click to expand...
Click to collapse
i tried all versions and all possible combinations. i am right now in the middle of a complete wipe and install. also BLD and BLN work together right?
sagarpruthi said:
i tried all versions and all possible combinations. i am right now in the middle of a complete wipe and install. also BLD and BLN work together right?
Click to expand...
Click to collapse
Seemed to, I had it dim the keys after 500 ms (I don't really care for them and don't need to see them to use them), and BLN for notifications. I used NStools to configure both of these options, but that was several NStools updates ago. At the time I was using Nexus Beam with ICUP speedy 3, but I've since moved on to CM9.
***Edit***
I did notice depending on the configuration that certain timing settings would not work properly, dunno why. Could have just been the way I had it set up.
corgan1001 said:
Seemed to, I had it dim the keys after 500 ms (I don't really care for them and don't need to see them to use them), and BLN for notifications. I used NStools to configure both of these options, but that was several NStools updates ago. At the time I was using Nexus Beam with ICUP speedy 3, but I've since moved on to CM9.
***Edit***
I did notice depending on the configuration that certain timing settings would not work properly, dunno why. Could have just been the way I had it set up.
Click to expand...
Click to collapse
Can u share your setup?
sagarpruthi said:
Can u share your setup?
Click to expand...
Click to collapse
Link to kernel (updated since last used)
http://forum.xda-developers.com/showthread.php?t=1401455
Link to ROM (updated since last used)
http://forum.xda-developers.com/showthread.php?t=1380608
NStools had BLD set to 500ms, BLN enabled
Didn't really change much else, no custom overclock settings or anything like that.
Matr1x also worked well for me on various ROMs I sampled
http://forum.xda-developers.com/showthread.php?t=1361477
Since I moved to CM9 I am just using the CM kernel, it doesn't have all the configurable options that the others did, at least not yet.
Hello!
As you can see in the title BLN isn't working!
I tried also another kernel (air kernel) and it's not working...
The rom is the best i tried so far with this one exception!
I tried using BLN control but the same as with NSTools, not working...
anyone a hint please?!
dmnk93 said:
Hello!
As you can see in the title BLN isn't working!
I tried also another kernel (air kernel) and it's not working...
The rom is the best i tried so far with this one exception!
I tried using BLN control but the same as with NSTools, not working...
anyone a hint please?!
Click to expand...
Click to collapse
In the NSTools app, have you enabled the service on the setting tab?
Change your kernel into one that supports BLN
Sent from my SGH-I9000 using XDA Premium App
dmnk93 said:
Hello!
As you can see in the title BLN isn't working!
I tried also another kernel (air kernel) and it's not working...
The rom is the best i tried so far with this one exception!
I tried using BLN control but the same as with NSTools, not working...
anyone a hint please?!
Click to expand...
Click to collapse
i have been using matr1x 18.5 and 19 with codename 4/12 RC 4/12,13,14 nightlies and BLN works with each one just fine. Try this: uninstall bln control, go into recovery and wipe dalvik cache (and cache if you want) then re-flash matr1x 19. then reboot system. tell us if that works.
chalan30 said:
i have been using matr1x 18.5 and 19 with codename 4/12 RC 4/12,13,14 nightlies and BLN works with each one just fine. Try this: uninstall bln control, go into recovery and wipe dalvik cache (and cache if you want) then re-flash matr1x 19. then reboot system. tell us if that works.
Click to expand...
Click to collapse
i tried it but it wasn't working
i may try a nightly to...
I am using Cynagon 10 mod right now. Is there any other rom that is good or better that comes with this feature by default?
namsu55 said:
I am using Cynagon 10 mod right now. Is there any other rom that is good or better that comes with this feature by default?
Click to expand...
Click to collapse
CM10 does have BLN. Go into settings>advanced and you'll see the option for BLN
d_phekt said:
CM10 does have BLN. Go into settings>advanced and you'll see the option for BLN
Click to expand...
Click to collapse
It does have it yes and it does work. But the link for Gapps isn't working so right now I need a ROM that works with BLN. Is there any other that's worth trying?
namsu55 said:
It does have it yes and it does work. But the link for Gapps isn't working so right now I need a ROM that works with BLN. Is there any other that's worth trying?
Click to expand...
Click to collapse
you can flash any ROM you want because if it has no BLN you can flash a kernel with this feature...
like bedalus kernel...and enable it via NStools..
S.R.
Or flash codename android 3.2.1. Its up to you how you want it.
Sent from SpeedMachine i9023
Thanks guys. I had a look the kernels from Kernel manager. Right now just back on to the jelly bean, downloaded a BLN application that requires the kernel to support it (which my ROM does) and works perfectly.
Hi,
I just flashed *Matr1x* v23.5BLN kernel for BLN support, but it does not work on my Nexus S i9023. I tried BLN control and NSTools for activation, but without any success.
Does anyone have experiences with BLN with the same configuration?
Thanks in advance
gilbert089 said:
Hi,
I just flashed *Matr1x* v23.5BLN kernel for BLN support, but it does not work on my Nexus S i9023. I tried BLN control and NSTools for activation, but without any success.
Does anyone have experiences with BLN with the same configuration?
Thanks in advance
Click to expand...
Click to collapse
That's my same issue.
BLN can be set with some difficulties on JB.
In my case, I'm using Marmite kernel. BLN works, but I cannot keep the lights on.
... indeed: in testing mode within BLN control, lights go on but not when
a call or sms come in I think the best thing is to move from
factory to CyanogenMod or another custom ROM
BLN problem
gilbert089 said:
... indeed: in testing mode within BLN control, lights go on but not when
a call or sms come in I think the best thing is to move from
factory to CyanogenMod or another custom ROM
Click to expand...
Click to collapse
Correct!
I'm using stock OTA 4.1.2 and matr1x 23.5 kernel, flashed using TWRP recovery, installed busybox, activated through NSTools.
BLN works excellent on SMS and missed calls. Blinking works fine too, OC 1.2ghz works fine also.
ej8989 said:
I'm using stock OTA 4.1.2 and matr1x 23.5 kernel, flashed using TWRP recovery, installed busybox, activated through NSTools.
BLN works excellent on SMS and missed calls. Blinking works fine too, OC 1.2ghz works fine also.
Click to expand...
Click to collapse
I did nearly the same: self-installed stock 4.1.2 via update from 4.1.1, CWM recovery, DooMLoRD_v4_ROOT-zergRush-busybox-su - will try CyanogenMod M2 today
The subject is on.
Any solution to get BLN with CM kernel?
Sensitivity said:
The subject is on.
Any solution to get BLN with CM kernel?
Click to expand...
Click to collapse
CM kernel already has BLN included IIRC. You can use Devil Tools, NSTools and many other software to control it.
polobunny said:
CM kernel already has BLN included IIRC. You can use Devil Tools, NSTools and many other software to control it.
Click to expand...
Click to collapse
BLN control said it's not..
Sensitivity said:
BLN control said it's not..
Click to expand...
Click to collapse
Because BLN control can control Neldar implementation only as far as I'm aware. BLN in CM is CM own implementation which differs a bit. Use another software, or through an init.d script.
polobunny said:
Because BLN control can control Neldar implementation only as far as I'm aware. BLN in CM is CM own implementation which differs a bit. Use another software, or through an init.d script.
Click to expand...
Click to collapse
and you know what app can i use to blinking notification with BLN?
Try nstools
Sent from my ns4g using Tapatalk 2