TWRP 2.7.1.2 & CM nightly 200140831: Error executing updater binary in zip - Motorola Photon Q 4G LTE

I flashed 2.7.1.2 from the official teamwin website, and did a factory wipe. I copied cm-11-20140831-NIGHTLY-moto_msm8960.zip with md5 to /external_sd and I try to install it from TWRP. It says:
Code:
Full SELinux support is present.
Installing '/external_sd/cm-11-20140831-NIGHTLY-moto_msm8960.zip'...
Checking for MD5 file
MD5 matched
Verifying zip signature...
This package is for devices with 4.4 bootloader
E:Error executing updater binary in zip '/external_sd/cm-11-20140831-NIGHTLY-moto_msm8960.zip'
Erro flashing zip '/external_sd/cm-11-20140831-NIGHTLY-moto_msm8960.zip'
Updating partition details...
I've found a similar issue which was due to TWRP 2.7.1.1 (and solved with upgrade to 2.7.1.2).
Previous attempts were to install M8-moto_msm8960 via ClockworkMod, resulting in dead WiFi. Then I upgraded to TWRP as more recent images would not flash in CWM, and tried nightly snapshot as per above. I am able to flash cm-11-20140708-SNAPSHOT-M8-moto_msm8960.zip in TWRP 2.7.1.2 now, WiFi works. I can wait for the next milestone, or the official CM11, and use M8, but I would like to be able to upgrade later anyway.
Any suggestions as to what to try?

eudoxos.eu said:
Code:
Verifying zip signature...
[B]This package is for devices with 4.4 bootloader[/B]
E:Error executing updater binary in ...
Click to expand...
Click to collapse
See http://forum.xda-developers.com/photon-q-4g-lte/general/cyanogenmod-11-0-photon-q-t2838299
Use moto_msm8960_jbbl builds.

kabaldan said:
See http://forum.xda-developers.com/photon-q-4g-lte/general/cyanogenmod-11-0-photon-q-t2838299
Use moto_msm8960_jbbl builds.
Click to expand...
Click to collapse
Thanks, that worked!

Related

[Q] CM11 Nightlies Installation Failure

When I try to install the CM11 nightly builds as found through this thread:
http://forum.xda-developers.com/showthread.php?t=2570965
the update process fails. Below a snip ffrom the TWRP log (I've attached the complete log).
minzip: Extracted file "/system/xbin/vim"
ApplyParsedPerms: removexattr of /system/addon.d/50-cm.sh to 0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/external_sdcard/ROM/cm-11-20140101-NIGHTLY-tf300t.zip'
Error flashing zip '/external_sdcard/ROM/cm-11-20140101-NIGHTLY-tf300t.zip'
Through creative Googling I found some references to the install failing with TWRP and succeeding with CWM. However, the CWM ROM Manager tells me there is no supported recovery version for the TF300, so I have no idea which version to pick.
I should mention I may have partially broken my partition table when making nvFlash available though. I made another post about that:
http://forum.xda-developers.com/showthread.php?t=2594142
to which I was hoping to get a reply by now.
I'm hoping someone could help me out, I'd really like to try KitKat on this tablet.
Thanks!
Wrong TWRP?!
Orionos said:
When I try to install the CM11 nightly builds as found through this thread:
http://forum.xda-developers.com/showthread.php?t=2570965
t[...]
I'm hoping someone could help me out, I'd really like to try KitKat on this tablet.
Thanks!
Click to expand...
Click to collapse
Hmm, regularly the issue with TWRP for the TF300T is that you need a very specific/modified version, more often than not for the TF300T not the one from the TWRP site.
I can only recommend using this script to update to CM11, as it does all the installation/downloading/flashing for you, inlcuding the correct TWRP and CM/Omni and GAPPS.
http://forum.xda-developers.com/showthread.php?t=2579922
Hope this helps
recovery
Recheck the original post and make sure you are using the correct recovery.
buche,
Your script helped. When using that particular recovery, not only can I install KitKat, but my backups started working as well. Of course, the patched TWRP generates an error when installing CM10. Go figure.
norskyforce,
The post stated:
"To install, you need a recent CWM or other recovery."
I figured I was fine with the TWRP from the TWRP site. Apparently not.
Maybe I'll try the poster's recovery image. I'm still looking for the correct CWM to use, to see if it has more options. I miss 4ext
Thanks for the help.
Unfortunately, CM11/Omni don't appear to support my WiFi's channel 13. Took me a while to figure out why I could see all the neighbors' networks, but not my own.
And I just figured out neither CM10 or 11 supports my ASUS Connect Dock, which I use for the wired ethernet and USB. Grrr...

Problem with flashing CM11 -Snapshot M4

When I'm trying to flash cm-11-20140308-SNAPSHOT-M4-tf300t.zip by TWRP I receive such error message:
set_metadata_recursive: some changes failed
E:Error executing updater binary zip "/sdcard/cmupdater/cm-11......zip'
Error flashing zip '/sdcard/cmupdater/cm-11.......zip'...
Updating partition details.
Now i'm running on :
TWRP 2.6.3.0
CM-10.2.1
m81wwski said:
When I'm trying to flash cm-11-20140308-SNAPSHOT-M4-tf300t.zip by TWRP I receive such error message:
set_metadata_recursive: some changes failed
E:Error executing updater binary zip "/sdcard/cmupdater/cm-11......zip'
Error flashing zip '/sdcard/cmupdater/cm-11.......zip'...
Updating partition details.
Now i'm running on :
TWRP 2.6.3.0
CM-10.2.1
Click to expand...
Click to collapse
In order to flash CM11, you need to use the new TWRP version. The steps are links are all here:
http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7

[Q] Error updating to CM11s 38r

Running on a rooted phone with stock ROM (11.0-XNPH33R) and custom recovery (TWRP 2.8.0.1)
Received the OTA and I tried installing, but just took me to the recovery and didn't auto install unlike previous times.
So I tried manually flashing it, but I get this error:
E: Zip Signature verification failed: 1
E: Error executing updater binary in zip '/sdcard/.......... zip'
I unchecked zip signature verification, but I'm still having the second error. Also downloaded the update from external mirrors, but still have the same problem.
Error:
http://imgur.com/wtdwT7Z&1MxjkHY#0
http://imgur.com/wtdwT7Z&1MxjkHY#1
I'm having the same issue...
---------- Post added at 12:53 PM ---------- Previous post was at 12:28 PM ----------
Fixed,
I used the modified script version from here
http://forum.xda-developers.com/oneplus-one/general/xnph38r-ota-update-t2897933
Zip verification Error
I'm getting following errors when I"m trying to update:
Zip Signature verification failed: 1
Error executing updater binary in zip '/sdcard/.......... zip'
I have unmodified ROM - unlocked bootloader, TWRP and rooted (with OnePlus One Toolbox). I've tried OTA, manually installing original zip in TWRP and modified zip from this thread. Same error. Tried to locate solution here but couldn't. Anyone knows how to solve it?
Thanks.
midirt said:
I'm getting following errors when I"m trying to update:
Zip Signature verification failed: 1
Error executing updater binary in zip '/sdcard/.......... zip'
I have unmodified ROM - unlocked bootloader, TWRP and rooted (with OnePlus One Toolbox). I've tried OTA, manually installing original zip in TWRP and modified zip from this thread. Same error. Tried to locate solution here but couldn't. Anyone knows how to solve it?
Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-4-4-4-xnph38r-t2898098

Promblem flashing LineageOS 16

I ran into a problem trying flashing LineageOS 16 into my one
I flashed newest twrp 3.3.0 successfully
But when I tried to use adb sideload to flash LineageOS a problem happened
The flashing process just ended immediatly
In the command prompt it says:
serving: 'lineage-16.0-20190422-nightly-bacon-signed.zip' (~0%) adb: failed to read command: No error
On my phone it says:
Starting ADB sideload feature...
Installing zip file '/sideload/package.zip'
Waring: No file_contexts
Comparing TZ version TZ.BF.2.0-2.0.0109 to TZ.BF.2.0-2.0.0096
Comparing TZ version TZ.BF.2.0-2.0.0123 to TZ.BF.2.0-2.0.0096
Comparing TZ version TZ.BF.2.0-2.0.0134 to TZ.BF.2.0-2.0.0096
assert failed: oppo.verify_trustzone("TZ.BF.2.0-2.0.0109","TZ.BF.2.0-2.0.0123","TZ.BF.2.0-2.0.0134") == "1"
Updater process ended with ERROR: 7
I don't know what to do now, I googled, no one seems to have the same problem, I tried on a different computer, didn't work, I pushed the install package into my phone's storage and install from there, didn't work
Can anyone help?
I don't think you should be trying to adb sideload, just wipe Data, System, Dalvik, Cache (without internal storage) and flash the zip.
Be warned, lineage 16 currently has an issue where the wifi is unstable if used with gapps (https://gitlab.com/LineageOS/issues/android/issues/392).
You mean flash the zip from internal storage? I tried that, didn't work, same problem
Does it work with an older version of TWRP?
SethGeckoXDA said:
Does it work with an older version of TWRP?
Click to expand...
Click to collapse
Tried that, didn't work, same problem
tkgrand said:
Tried that, didn't work, same problem
Click to expand...
Click to collapse
I think this is because the modem needs to be updated before flashing.
Try flashing this modem zip before flashing rom. ---> https://androidfilehost.com/?fid=24052804347825946
Steps:
1.Open twrp
2.Flash modem
3.Flash lineage
3.Flash gapps
4.Restart
vicky2131 said:
I think this is because the modem needs to be updated before flashing.
Try flashing this modem zip before flashing rom. ---> https://androidfilehost.com/?fid=24052804347825946
Steps:
1.Open twrp
2.Flash modem
3.Flash lineage
3.Flash gapps
4.Restart
Click to expand...
Click to collapse
Yes! It works! Thank You!
twrp-3.6.2_9-0-bacon.img 14.9M 2022-05-30 00:09:30 UTC works as well. Thank you.

Question Problem updating arrowOS

I get an error when I install the system update.
I want to update manually via recorvery but I get an error: E: recvmsg failed (No buffer space available) do you have any ideas for this? System arrowOS
and assert failed: update_dynamic_partitions(package_extract_file("dynamic_partitions_op_list")) E:Error in /sideload/package.zip (status 1)
MAybe your downloaded file is corrupted?
No, I have that with every update. It only works when you reload the system. I reset the settings and everything and the same
It seems you are updating via sideload, maybe damaged data cable?
I changed the cable and the same
Why not just use OTA update?
TWRP latest beta and arrow recovery support that.
Never had any issue like that even when I manually updated in TWRP.
I just tried via OTA but an error pops up
Installation via TWRP: Updater process ended with ERROR: 1, Error installing zip file '/external_sd/Arrow-v12.1-vayu-Official-20220821-VANILLA.zip, Failed to mount '/system_root' (No such file or directory)
Jason355 said:
Installation via TWRP: Updater process ended with ERROR: 1, Error installing zip file '/external_sd/Arrow-v12.1-vayu-Official-20220821-VANILLA.zip, Failed to mount '/system_root' (No such file or directory)
Click to expand...
Click to collapse
Yup you're download is corrupt
I tried variously it does not work
Jason355 said:
Installation via TWRP: Updater process ended with ERROR: 1, Error installing zip file '/external_sd/Arrow-v12.1-vayu-Official-20220821-VANILLA.zip, Failed to mount '/system_root' (No such file or directory)
Click to expand...
Click to collapse
Flash MIUI Fastboot-Image, then ArrowOS. /system_root' (No such file or directory) <= not good.
If you are fast enough, you can boot directly into fastboot after successfully flashing MIUI and flash TWRP and ArrowOS. I did this on another phone a few months ago and it worked
Tried different ways to restore and nothing has helped. I downloaded Crdroid and solved the problem. Thanks to everyone for the answers <3
Jason355 said:
Tried different ways to restore and nothing has helped. I downloaded Crdroid and solved the problem. Thanks to everyone for the answers <3
Click to expand...
Click to collapse
That just means your download was 100% corrupted.

Categories

Resources