Database Info

Cannot flash update.zip using stock recovery

Hello,
I booted my phone into recovery and selected install update from zip on stock recovery. It said after loading 'SIGNARURE VERIFICATION FAILED '
INSTTALLATION ABORTED!
My phone isn't in the list of phones supported for Cwm recovery in rom manager as it shows my alcatel phone as htc vision which it got changed into (model number about phone in settings) after I rooted my phone. So I thought that if all I get it i'll see how I'll flash the cwm.zip after I download! But thanks to the problem mentioned above, I have no hope!!!
What will I do to flash cwm ('IF' I get. It? Please help me!!
sent from my Alcatel OT-890D

Alcatel 4010x CWM flashing doesn't work?

Dear community,
I'm looking for some help about flashing CWM to Alcatel OT 4010X.
I have successfully rooted it yesterday with vroot (re-checked if it's alright with Root Checker, and it shows it's good), but when I try the method you can find everywhere on the net (flashing the recovery image with mobile uncle tools) it asks for root permissions, the restarts the phone and nothing happens. When I try to boot into recovery, I have the stock recovery in it (Android System Recovery 3e).
How can i flash cwm?
Thanks in advance!
EDIT: Nevermind....I finally managed it

Please help me to Unbrick M2 Note.

Hi....
I was on Chinese Firmware.
I was unlocked bootloader of m2 note.
Then i install twrp recovery( I created backup through twrp recovery ).
Then Flash LineageOS ROM.
Then i restore ( chinese firmware ) from twrp.
I found stock recovery of flyme 5 and I flashed this from Rashr.
Then i try to re-flash same chinese firmware(like normal update from update.zip from file manager).
it successfully upgraded(shown in phone screen), but not booted.
when i try to connect phone to pc, it connect and dis-connect automatically after 1-2 seconds.
i can't flash anything..(when i try to flash recovery, it downloaded in sp flash tool, but not flashed bcoz phone is disconnected.):crying::crying:
if anyone know the solution, plzzz tell me....

Can't get any recovery to work except philz!

Hi,
I'm using LG G3 AT&T (D850). When I bought it, It had Philz recovery already installed but Philz recovery installed is of LG G3 VS985. I want to flash Lineage OS but I can't because Philz recovey gives me an error saying: "This Zip is for device D850 and you're using VS985".
I tried to installed TWRP by using PC and also by using Flashify. There was no problem in installation but When I try to boot into recovery, There's nothing except black screen and Red blue Flashing led lights(Notification lights).
When I flash VS985 Philz recovery into my phone, The recovery works. And The CWM app is showing that I have two recoveries installed namely CWM and TWRP.
Please help

AbdulSammad said:
Hi,
I'm using LG G3 AT&T (D850). When I bought it, It had Philz recovery already installed but Philz recovery installed is of LG G3 VS985. I want to flash Lineage OS but I can't because Philz recovey gives me an error saying: "This Zip is for device D850 and you're using VS985".
I tried to installed TWRP by using PC and also by using Flashify. There was no problem in installation but When I try to boot into recovery, There's nothing except black screen and Red blue Flashing led lights(Notification lights).
When I flash VS985 Philz recovery into my phone, The recovery works. And The CWM app is showing that I have two recoveries installed namely CWM and TWRP.
Please help
Click to expand...
Click to collapse
Actually You Have Broken Your Phone's Recovery . Your Phone's Bootloader Was Locked And You Flashed A Bumped Image By Flashify .
.
You can install through flashify only on kitkat and you need to flash a bumped recovery image .
On Lollipop , you cannot flash a bumped recovery directly by flashify . You need to flash it through pc by IMAGPREP tool which can also brick your phone if used stupidly .
.
So , my advice is to go back and flash the stock kitkat firmware through lg flash tool .
after that you can easily root your phone and install a bumped recovery by flashify .
If You Want To Flash bumped Philz Recovery ,
Then this is the only thread in xda https://forum.xda-developers.com/att-lg-g3/development/recovery-cwm-philz-touch-6-advanced-t3632940
If you want to flash bumped twrp , then visit https://dl.twrp.me/d850/

I am on kitkat

Mansoor4139 said:
Actually You Have Broken Your Phone's Recovery . Your Phone's Bootloader Was Locked And You Flashed A Bumped Image By Flashify .
.
You can install through flashify only on kitkat and you need to flash a bumped recovery image .
On Lollipop , you cannot flash a bumped recovery directly by flashify . You need to flash it through pc by IMAGPREP tool which can also brick your phone if used stupidly .
.
So , my advice is to go back and flash the stock kitkat firmware through lg flash tool .
after that you can easily root your phone and install a bumped recovery by flashify .
If You Want To Flash bumped Philz Recovery ,
Then this is the only thread in xda https://forum.xda-developers.com/att-lg-g3/development/recovery-cwm-philz-touch-6-advanced-t3632940
If you want to flash bumped twrp , then visit https://dl.twrp.me/d850/
Click to expand...
Click to collapse
I'm on kitkat

Soft bricked phone MT6572 kitkat 4.4.2

Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.

cybrax said:
Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
Click to expand...
Click to collapse
Hey I got one of them x27 plus wish phone....mtk6572 4.4.2 kitkat .....for true info on device install "device info hw" green icon and activity launcher .....check out the info it gives compared to info from ph settings menu.....but my question did you find way to root of flash a generic android rom?

I used kingroot with laptop.