I want to update the latest CyanogenMod NIGHTLY update without losing any files. How can I do this?
Should I just flash the NIGHTLY update zip and then clean system cache and dalvik cache?
Please tell me the correct procedure.
pankajmahato said:
I want to update the latest CyanogenMod NIGHTLY update without losing any files. How can I do this?
Should I just flash the NIGHTLY update zip and then clean system cache and dalvik cache?
Please tell me the correct procedure.
Click to expand...
Click to collapse
1. Flash cm11-xxxxxxxx-NIGHTLY-taoshan.zip via recovery
2. Wipe only cache & dalvik cache
3. Done
If you use the CM Updater from Settings -> about phone -> CyanogenMod updates it will all be done for you. Just follow instructions.
CM Updater not working.
Joery360 said:
1. Flash cm11-xxxxxxxx-NIGHTLY-taoshan.zip via recovery
2. Wipe only cache & dalvik cache
3. Done
If you use the CM Updater from Settings -> about phone -> CyanogenMod updates it will all be done for you. Just follow instructions.
Click to expand...
Click to collapse
I previously tried the CM updater, whenever I update using it then I get bootloop, then I have to clean install the the ROM. Why is it happening?
I will try installing using recovery.
pankajmahato said:
I previously tried the CM updater, whenever I update using it then I get bootloop, then I have to clean install the the ROM. Why is it happening?
I will try installing using recovery.
Click to expand...
Click to collapse
Are you using a custom kernel like ThunderZap/Phantom? Because you have to reflash it every rime you update. You can best use CyanDelta for it instead of CM updater.
Send from my A0001 using Tapatalk
I have Phantom kernel
Joery360 said:
Are you using a custom kernel like ThunderZap/Phantom? Because you have to reflash it every rime you update. You can best use CyanDelta for it instead of CM updater.
Send from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yes, I have Phantom kernel. So CM updater will not work me?
pankajmahato said:
Yes, I have Phantom kernel. So CM updater will not work me?
Click to expand...
Click to collapse
No, make sure to flash Phantom after you installed the update. CyanDelta has a option to do it automatically.
Send from my A0001 using Tapatalk
Nothing is working
Joery360 said:
No, make sure to flash Phantom after you installed the update. CyanDelta has a option to do it automatically.
Send from my A0001 using Tapatalk
Click to expand...
Click to collapse
I tried the CM updater and then flashed Phantom kernel, then I got a dialog box on the boot saying
"Android is upgrading
Finishing Boot"
and it is stuck here.
Then I tried installing from recovery using these steps
1. Delete Cache/Dalvik Cache
2. Install from ZIP
3. Delete Cache/Dalvik Cache
Now I got the same message that "Finishing boot"
I waited on this screen for more than 30 mins still nothing happened, so I removed the battery and I got bootloop.
Finally I had to restore my old NIGHTLY update
What is happening??
please help me
pankajmahato said:
I tried the CM updater and then flashed Phantom kernel, then I got a dialog box on the boot saying
"Android is upgrading
Finishing Boot"
and it is stuck here.
Then I tried installing from recovery using these steps
1. Delete Cache/Dalvik Cache
2. Install from ZIP
3. Delete Cache/Dalvik Cache
Now I got the same message that "Finishing boot"
I waited on this screen for more than 30 mins still nothing happened, so I removed the battery and I got bootloop.
Finally I had to restore my old NIGHTLY update
What is happening??
please help me
Click to expand...
Click to collapse
'install from zip'
Did you installed both NIGHTLY & Phantom? Because then everything should work.
Send from my A0001 using Tapatalk
Only CM11
Joery360 said:
'install from zip'
Did you installed both NIGHTLY & Phantom? Because then everything should work.
Send from my A0001 using Tapatalk
Click to expand...
Click to collapse
I installed only the NIGHTLY. Will try again
But there is a problem when I install Phantom then my Recovery changes from CWM to Philz Touch and the Sony logo changes to Phantom.
How to get back my CWM and Sony Logo? I don't like Philz touch and Phantom logo
pankajmahato said:
I installed only the NIGHTLY. Will try again
But there is a problem when I install Phantom then my Recovery changes from CWM to Philz Touch and the Sony logo changes to Phantom.
How to get back my CWM and Sony Logo? I don't like Philz touch and Phantom logo
Click to expand...
Click to collapse
You can ask the dev if he/she can compile a version with the Sony logo & CWM. Other than that, there's no solution.
Send from my A0001 using Tapatalk
Joery360 said:
You can ask the dev if he/she can compile a version with the Sony logo & CWM. Other than that, there's no solution.
Send from my A0001 using Tapatalk
Click to expand...
Click to collapse
hey bro im new to xperia l as my friend wants to install custom rom in his phone!!
can u check dis post and reply??
http://forum.xda-developers.com/xperia-l/help/how-to-flash-custom-rom-to-xperia-l-t2875640
would be happy if u can give a detailed explanation!!
also do suggest cm11 official or cm11 fxp to use??
thanks in advance!!
Related
Hello,
Here is I want to share my work of latest AOSP Jelly Bean 4.3 with build number JSS15J for Nexus 7 (WIFI).
I have do this from the source on google.
This ROM can be flash via CWM (TWRP not tested). Make sure you have installing CWM first (I have 6.0.3.3 on my tablet).
Let's to the point .
Download Link : https://www.dropbox.com/sh/x2wov7n2f8m7eze/5rzHYlV4tq/grouper43-gapps.zip
Instruction :
Please backup your current ROM first before execute this.
Make sure you have upgrade Bootloader v4.23 and Radio 1231_0.18.0_0409
1. Download and put them in your internal SDCard.
2. Reboot into your recovery mode.
3. Wipe Data/Factory.
4. Wipe Cache Partition.
5. Wipe Dalvik Cache.
6. Installing from ZIP
7. Reboot and enjoy.
Features :
1. ROM already Deodexed.
2. Dual Panel Settings.
3. Combined with Latest Gapps.
4. Latest Kernel 4.3 (MR2)
5. Advanced Power Menu
Android 4.3 Version :
JWR66V is 4.3_r1
JSR78D is 4.3_r2
JSS15J is 4.3_r2.1
DO WITH YOU OWN RISK
Credits :
Google
Thank you .
Reserved .
First...downloading now.......
No root?
Sent from my Nexus 7 using xda app-developers app
_-..zKiLLA..-_ said:
No root?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Yes, You must installing latest Superuser/SuperSU after that if you want to root them .
This is pure stock with zero customization and tweak am I right?
Sent from my GT-I9100 using Tapatalk 4
infatality said:
This is pure stock with zero customization and tweak am I right?
Sent from my GT-I9100 using Tapatalk 4
Click to expand...
Click to collapse
It's pure stock who have compile from the source on Google. But, I have add power menu and combining with latest Gapps.
why there is a bootloader requirement?
Sent from my Nexus 7
1Q84 said:
why there is a bootloader requirement?
Sent from my Nexus 7
Click to expand...
Click to collapse
Actually, that was optional. I said in that above because their stock ROM include with new Radio and Bootloader. Only keep they can working properly .
failed to install?
podagee said:
failed to install?
Click to expand...
Click to collapse
Can you specific about the error message ?
tried installing it through twrp and it says failed right at the end.is this for grouper?
TWRP says:
extracting system...
set_perm: some changes failed
E:Errror executing updater binary in zip '/sdcard/download/aosp43-grouper-gapps.zip
Error flashing zip '/sdcard/download/aosp4-grouper-gapps.zip
I think your source is for tilapia no radio in grouper I tried install same errors
Sent from my Nexus 7 using Tapatalk 4
_-..zKiLLA..-_ said:
TWRP says:
extracting system...
set_perm: some changes failed
E:Errror executing updater binary in zip '/sdcard/download/aosp43-grouper-gapps.zip
Error flashing zip '/sdcard/download/aosp4-grouper-gapps.zip
Click to expand...
Click to collapse
jimchee said:
I think your source is for tilapia no radio in grouper I tried install same errors
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
podagee said:
tried installing it through twrp and it says failed right at the end.is this for grouper?
Click to expand...
Click to collapse
I am sorry, Please hold on while I checking to fix and reupload them.
The file has been examining and corrected. You can download them now.
Any chance for an Odexed base?
I tried again to install and just sat on the boot screen and tried again after booting back into recovery and clearing dalvik cache same result, has anyone else successfully booted? If so tell me how you proceeded on install, I formatted data and cache then wiped boot and did clean install, it did install but just stayed on boot animation, let it run for at least 10 minutes but never booted into Rom,
Sent from my Nexus 7 using Tapatalk 4
jimchee said:
I tried again to install and just sat on the boot screen and tried again after booting back into recovery and clearing dalvik cache same result, has anyone else successfully booted? If so tell me how you proceeded on install, I formatted data and cache then wiped boot and did clean install, it did install but just stayed on boot animation, let it run for at least 10 minutes but never booted into Rom,
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
same here no success with boot, it just hangs. ill just stick to cm10.2
I wanted to try a KitKat ROM so i downloaded a couple on PC and transferred to SD card. I did a backup (which really saved me lol) and then, as instructed , formatted system, data, and cache. Wiped Dalvik and flashed ROM (Paranoid Android 4.0). It started but after the "installing update" message I got a error message " error /location of zip/name of zip (status0)". I thought it meant that the zip was corrupted so i downloaded on PC again. Transferred to SD and tried to install following the same stepsand got the error again. After that I tried to install another ROM(Validus 5.1) and still got the error. Decided to restore and see if i could get help before trying again. Any ideas what is wrong? Thanks in advance for any help
EDIT can dev please move I thought i was posting in troubleshooting section. Sorry
explicitKC said:
I wanted to try a KitKat ROM so i downloaded a couple on PC and transferred to SD card. I did a backup (which really saved me lol) and then, as instructed , formatted system, data, and cache. Wiped Dalvik and flashed ROM (Paranoid Android 4.0). It started but after the "installing update" message I got a error message " error /location of zip/name of zip (status0)". I thought it meant that the zip was corrupted so i downloaded on PC again. Transferred to SD and tried to install following the same stepsand got the error again. After that I tried to install another ROM(Validus 5.1) and still got the error. Decided to restore and see if i could get help before trying again. Any ideas what is wrong? Thanks in advance for any help
EDIT can dev please move I thought i was posting in troubleshooting section. Sorry
Click to expand...
Click to collapse
Are you using the most recent version of TWRP, CWM, or Philz recovery? Are you currently running a custom ROM?
EDIT: Thread reported to mod as "Thread needs moving or maintenance."
Sent from my SGH-T989 using Tapatalk
jrc2 said:
Are you using the most recent version of TWRP, CWM, or Philz recovery? Are you currently running a custom ROM?
EDIT: Thread reported to mod as "Thread needs moving or maintenance."
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
I'm using a custom ROM right now, I don't know if the Philz I have is the most recent. Would that cause errors? How would i know what version I have installed.
explicitKC said:
I'm using a custom ROM right now, I don't know if the Philz I have is the most recent. Would that cause errors? How would i know what version I have installed.
Click to expand...
Click to collapse
If the version of Philz you are using is from JB then that could cause the errors.
Sent from my SGH-T989 using Tapatalk
jrc2 said:
If the version of Philz you are using is from JB then that could cause the errors.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
ok I installed CWM recovery v6.0.1.2. I tried installing Paranoid Android again and after it got to Installing Update I got a message
set_metadata_recursive: some changes failed
E:Error in /external_sd/zips/pa_p3113-4.3-BETA4-20140513.zip
(Status 7)
Installation aborted.
explicitKC said:
ok I installed CWM recovery v6.0.1.2. I tried installing Paranoid Android again and after it got to Installing Update I got a message
set_metadata_recursive: some changes failed
E:Error in /external_sd/zips/pa_p3113-4.3-BETA4-20140513.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
jrc2 said:
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
TY i'll download and try, Is there a recommended recovery? Or is it just personal preference?
explicitKC said:
TY i'll download and try, Is there a recommended recovery? Or is it just personal preference?
Click to expand...
Click to collapse
I am currently using TWRP, but I have used PhilzTouch in the past. They both work pretty well. TWRP has bigger buttons that are spaced out better and has an easier interface to use. PhilzTouch has some other features but isn't as polished. It is just a matter of personal preference. Some Roms will have a recommended recovery listed, though.
Also, to make sure that the zip you download isn't corrupted, check the md5 of the zip you download against the md5 on the download page.
Sent from my SGH-T989 using Tapatalk
Biggest advantage of using Phillz touch is that it can detect OTG cable,so you can flash ROMs from USB device as well;on the other hand, TWRP allows you to flash 10 zips at the same time,it will release the overhead of selecting Zip one after another manually. So choose your options wisely.
Edit:-
One more thing I would like to add,Phillz touch blackhawk supports dual-booting through next kernel
lokesh.3440 said:
Biggest advantage of using Phillz touch is that it can detect OTG cable,so you can flash ROMs from USB device as well;on the other hand, TWRP allows you to flash 10 zips at the same time,it will release the overhead of selecting Zip one after another manually. So choose your options wisely.
Click to expand...
Click to collapse
The version of TWRP I linked to also supports otg.
Sent from my SGH-T989 using Tapatalk
jrc2 said:
The version of TWRP I linked to also supports otg.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
really,which one are you referring to ? TWRP 2.7.0.3 ?
lokesh.3440 said:
really,which one are you referring to ? TWRP 2.7.0.3 ?
Click to expand...
Click to collapse
I am currently using 2.7.0.1 but 2.7.0.3 also has it. The one that I linked to was compiled by Android-Andi
Sent from my SGH-T989 using XDA mobile app
jrc2 said:
Status 7 means that your recovery is out of date. I am running AOSPA Beta4 on my p3113 and installed it using the latest TWRP from the below thread. The version of cwm in that thread should also work.
Latest recoveries: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Just wanted to say thanks again to jrc2. I went with TWRP because backup to sd card was not working on CWM and Philz. Backup would start and in the middle of backing up data or system tab would just reboot. But TWRP looks ok and flashed with no problems.
I am trying to flash Euphoria for my one and after i wipe the Dalvik Cache, System, Data, and cache and then when i try to flash the Euphoria zip, it fails instantly and says "Error Executing updater binary". How can i fix this issue? I have checked the md5 checksum and it matches the download.
Any help with this is greatly appreciated!
Flash the base.
loridoo said:
Flash the base.
Click to expand...
Click to collapse
I'm sorry, what do you mean by that?
hosfordryan said:
I am trying to flash Euphoria for my one and after i wipe the Dalvik Cache, System, Data, and cache and then when i try to flash the Euphoria zip, it fails instantly and says "Error Executing updater binary". How can i fix this issue? I have checked the md5 checksum and it matches the download.
Any help with this is greatly appreciated!
Click to expand...
Click to collapse
Try flagging the latest cm 12 nightly to get the latest firmware. Then wipe system, data, caches and install Euphoria
Sent from my A0001 using XDA Free mobile app
Incompatible recovery if you are using KK base ROM than flash latest recovery
Might solve your issue
If this aint help just let me know the issue in detail
aksclusive said:
Incompatible recovery if you are using KK base ROM than flash latest recovery
Might solve your issue
If this aint help just let me know the issue in detail
Click to expand...
Click to collapse
I tried updating TWRP to the latest version (2.8.5.1) and unfortunately I am still getting "error executing updater binary in zip" when i try to flash the euphoria rom. I am on the latest ota for the OnePlus.
In the console, above the error message, it says "assert failed: oppo.verify_trustzone("TZ.BF.2.0-2.0.0109") == "1"" if that is significant at all.
Thanks for the help
Ok, i flashed CM12 and then wiped and tried to flash Euphoria and it worked!
Thanks for the help everyone.
hosfordryan said:
Ok, i flashed CM12 and then wiped and tried to flash Euphoria and it worked!
Thanks for the help everyone.
Click to expand...
Click to collapse
Just an FYI, the tz assertion error has to do with not being on a cm12 firmware. Flashing the latest nightly automatically installs it for you. But if you want to go back to KitKat, you need to flash the cm11 firmware zip or you'll keep having an SOD
Sent from my A0001 using XDA Free mobile app
abhi08638 said:
Just an FYI, the tz assertion error has to do with not being on a cm12 firmware. Flashing the latest nightly automatically installs it for you. But if you want to go back to KitKat, you need to flash the cm11 firmware zip or you'll keep having an SOD
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Yep, just experienced that. I wen't back to Cm11 because i wasn't getting phone signal. Im on att. Do you know of a fix for this?
hosfordryan said:
Yep, just experienced that. I wen't back to Cm11 because i wasn't getting phone signal. Im on att. Do you know of a fix for this?
Click to expand...
Click to collapse
You need to flash the cm11 firmware zip or just the modem. You can find the files in the android development section
Edit: you can download the 05Q radio files from this thread
http://forum.xda-developers.com/showthread.php?t=2810365
Sent from my A0001 using XDA Free mobile app
Hey guys I'm complete stock except for recovery I'm running twrp...now I just like to know do keep cm recovery unticked when the update comes down...and will it update with twrp installed...
Sent from my A0001
JohnM109R said:
Hey guys I'm complete stock except for recovery I'm running twrp...now I just like to know do keep cm recovery unticked when the update comes down...and will it update with twrp installed...
Sent from my A0001
Click to expand...
Click to collapse
keep update cm recovery unticked and you should be fine.
Hi, I have tried to install a AOSP ROM (CM11-12, Omni 4.4-5.0..) on Aqua D2403, and it's always causes semibrick, never boots. I'm doing the installation process correctly, wipe data/cache, install rom and gapps.. Can some people helps me?
alemore99 said:
Hi, I have tried to install a AOSP ROM (CM11-12, Omni 4.4-5.0..) on Aqua D2403, and it's always causes semibrick, never boots. I'm doing the installation process correctly, wipe data/cache, install rom and gapps.. Can some people helps me?
Click to expand...
Click to collapse
Which recovery are you using?
linuxct said:
Which recovery are you using?
Click to expand...
Click to collapse
I'm using CWM.
Do you flash the recovery by zip or by fastboot?
rocapillon said:
Do you flash the recovery by zip or by fastboot?
Click to expand...
Click to collapse
I flash it by fastboot..
alemore99 said:
I'm using CWM.
Click to expand...
Click to collapse
Theres an specific version for aqua, check here http://forum.xda-developers.com/xperia-m2/general/d2403-easy-rooting-safety-unlocking-t3020662
linuxct said:
Theres an specific version for aqua, check here http://forum.xda-developers.com/xperia-m2/general/d2403-easy-rooting-safety-unlocking-t3020662
Click to expand...
Click to collapse
I've tried it few days ago, and it's doesn't boots on Philz Recovery.
alemore99 said:
I've tried it few days ago, and it's doesn't boots on Philz Recovery.
Click to expand...
Click to collapse
Then you installed two Recovery's at once?
Uninstall philz using the bat tool, the install the ROM using the cwm.
linuxct said:
Then you installed two Recovery's at once?
Uninstall philz using the bat tool, the install the ROM using the cwm.
Click to expand...
Click to collapse
I installed CWM, but it's only be able for use recovery one or two times, because it's causes bootloop, and then you have to flash the stock kernel. When I have restored the stock kernel, I install philz recovery, but as I say before this is not working for me..
alemore99 said:
I installed CWM, but it's only be able for use recovery one or two times, because it's causes bootloop, and then you have to flash the stock kernel. When I have restored the stock kernel, I install philz recovery, but as I say before this is not working for me..
Click to expand...
Click to collapse
Ah, I understand, then PhilZ not working ,but CWM yes.. Weird.
Can you try flashing the zip from Philz using the CWM? http://forum.xda-developers.com/xperia-m2/general/d2303-philz-touch-recovery-6-t3047492
Flashable: PhilZ Touch cwm6-flashable- new http://www.mediafire.com/download/m5fm7qb7et9x999/PhilZ_Touch_D2303_LB_flashable.zip
linuxct said:
Ah, I understand, then PhilZ not working ,but CWM yes.. Weird.
Can you try flashing the zip from Philz using the CWM? http://forum.xda-developers.com/xperia-m2/general/d2303-philz-touch-recovery-6-t3047492
Flashable: PhilZ Touch cwm6-flashable- new http://www.mediafire.com/download/m5fm7qb7et9x999/PhilZ_Touch_D2303_LB_flashable.zip
Click to expand...
Click to collapse
I already flash it, it doesn't work, the cyan led has appear if I touch vol- a few times, but it boots into system again..
alemore99 said:
I already flash it, it doesn't work, the cyan led has appear if I touch vol- a few times, but it boots into system again..
Click to expand...
Click to collapse
Weird. So you used the CWM to install the z4 experience right?
linuxct said:
Weird. So you used the CWM to install the z4 experience right?
Click to expand...
Click to collapse
Yes, because is the only one that have worked for me