photon q sim modded now on to cricket..? - Motorola Photon Q 4G LTE

My photon q has been modded with the sim card slot. I have flashed it, rooted (running Cyanogen), and did the NV edit. For some reason when i put my sim card in it says no service...:l it recognizes a sim but it is stuck on CDMA instead of GSM. Ive heard a bunch of different ways to fix this..all seem extremely confusing! is there anyone who has a guide or tutorial on what to do from this point? Ill even ship it to someone to fix at this point, i just want this phone to work! XDA has been an awesome community for help and support I appreciate the help beforehand! Thanks!

Related

[Q] Flash Pantech Breakout to PagePlus

I want to flash the Pantech Breakout to work on PagePlus. I have rooted it with CWM recovery and read this thread for instructions to flash the Thunderbolt
http://forum.xda-developers.com/showthread.php?t=1294179
So far, I have,
-Verizon Pantech Breakout, clean, no issues
-New unactivated Verizon LTE sim card (if necessary)
-CDMA Workshop 3.9.0 demo
The questions I have are,
1. How to enter Diag mode in the Breakout?
2. To activate a new phone on PagePlus, it requires an ESN or MEID number. How can I get it before I place the activation? Can CDMA workshop identify the MEID number?
3. To acquire 3G data, I read somewhere that it might work if I obtain the MIN # from PagePlus after activation and use CDMA to write it. Is this correct?
4. Will there be a problem if the MEID # starts with 99000?
Any other roadblocks to consider?
Thanks for any help.
Rooted, but need to flash to PP
Can anyone help?
Ok ok... I would help but mimited data so let me hit up my man jason here. Not sure what he'll charge you
Sent from an Apple killing JellyBean
ota looping with sim card
I need help too. The sim card won't provision and keeps the 3G from working. I can see the signal in the signal meter menu but I cannot get the phone to think it's provisioned. That's where I'm stuck. HELP!!!:crying:
Gtalk me @ [email protected]
Sent from an Apple killing JellyBean
3G data needs
moparfreak426 said:
Ok ok... I would help but mimited data so let me hit up my man jason here. Not sure what he'll charge you
Sent from an Apple killing JellyBean
Click to expand...
Click to collapse
Ok, I used CDMA Flasher to flash to Page Plus 3 months ago. Verizon just issued an OTA update and I need to flash Page Plus again (I have also blocked future OTA updates). My problem is that I only had 1g data. I want to reflash with 3G data. CDMA Flasher support says they are working on 3G data for Page Plus, but it's not ready yet. Will it ever be ready? I don't know. How to flash Pantech Breakout to Page Plus (originally Verizon) with 3G data?

[Q] Dual SIM ROM in Single SIM Phone?/ SIM Not recognized

So Ive been trying this for such a long time its disgusting. The thread title is my own conclusion from my research throughout the web but I may be wrong in my conclusions.
I have a Huawei G510 since last year. As soon as I got it I rooted it and found a ROM for it. The ROM is a dual SIM ROM and I remember doing something related to a cust folder or something, but I'm not sure. Fast forward to the last few weeks, I want to update to 4.4, and I download a bunch of roms, all of them work except for 1 thing: They dont recognize my SIM Card. I go to Status in the settings and everything about the SIM is "Unknown".
I found a Lewa ROM based on JB and that one was by chance a dual SIM ROM, and guess what, its the only ROM that works. So thats how I concluded that installing a dual SIM Rom must have changed something so that it doesnt recognize my SIM anymore?
So what should I do? Thanks in advance!:good:
anyone? any help is appreciated

[Completed] [Q] Sim problems

Okay, so I recently bought a Nubia z7 max, and it came fine working, sim card worked in lte, all the bells and whistles, the version was a multilang version of the 1.64 official software, so i used the official update tool provided by to update to a 5.0 android version of their software so it would repartition my internal memory in a way that CM12 would work, it worked. All was fine and dandy until I saw a friends Nexus 5 able to dual boot(using MultiRom app from play-store) i was so jealous of him that i copied his build.prop to my phone in an attempt to make my phone think it was a nexus 5. My idiotic attempt got my phone in a boot-loop, this resulted in me flashing a 3.09 version of the nubia software on it then TWRP and finally restoring from my CM12 backup using TWRP. But i have a problem neither sim slots seem to work, i already checked and the sim card works(by putting it into another phone), and no sim works on mine. I would really appreciate it if someone could help me recover my precious phone. Thank you in advance.
Hi, thank you for using XDA Assist. Yeah, never flash or copy system files from a different device than you have. You most likely need to flash the stock firmware on your device and start over to get the sim to work again. The best place to ask how to do this is in your device specific forum. See here, http://forum.xda-developers.com/zte-z7/help and also this, http://forum.xda-developers.com/zte-z7
Thread closed.

[Completed] [Q] LG G2 D800 Custom Rom not recognising sim card

Hi
I´m a little new to flashing roms etc, I have an LG G2 D800 which was on AT&T in America, here in Spain it is on the Vodafone network. I followed the procedure to flash the custom rom by Rashed97 with accompanying gapps and other zips (Supersu). Everything went well until I rebooted, during the setup procedure the operating system tells me that I can´t find or recoginse a sim card even though it is in place. I repeated the procedure but it still says there is no sim card and I´m not sure what to do, everything else wifi etc works fine. Whats the best thing to do, change to a different rom?
Thanks in advance for your help
Hi, thank you for using XDA Assist. The best place to find help is here, http://forum.xda-developers.com/att-g2/help Also see this, http://forum.xda-developers.com/att-g2

Root ics with CID error

Hi
Can someone please help? I've an ICS on atrix 2 running at&t ROM official on Indian Atrix 2,unfortunately I've lost my CID & getting cid error on boot & want to bypass it with bmm
I searched many threads couldn't get fix.i want to root my device and I was told to root using BP tool,I've no clue how to root using bptool as I've tried one click ICS root which didn't help,if someone can guide me or provide a link how to Root using bptool & also I need a bmm apk file as playstore doesn't have it,please need help.I'd really appreciate all the help
AFAIK, if you have not backed up your CID, you have to live with that error
Each phone has its own CID
Thanks for reply,my concern is rooting,how to root ICS when I've cid error can you help me I was told using bp tools I've no clue how to root using bptools
Pls see this post, part number 2
http://forum.xda-developers.com/showpost.php?p=61919769&postcount=19
Many thanks I followed your procedure & rooted it,one more question here as I've an Indian atrix 2 MB865 but flashed ATTversion I'm getting sim not found error,is this cause of flashing at&t or some other reason,here is the thing
I insert a micro sim of one carrier by Name Aircel it detects for sometime & again no sim card
If i insert normal mini sim card of mostly all the carriers ive tried ,it'll not detect my sim no matter what i do
Ive tried both 32k & 64k sim.i believe atrix 2 has mini sim,but still don't detect mini sim,but it detected micro sim for couple of hours
Sim I've used
Aircel -micro sim worked for 2 hours
Aircel - mini sim didn't work
Vodafone - mini sim didn't work
Docomo - mini sim didn't work,
Could you please help me,should I reflash Indian fxz? Or is it just a radio problem? Could you link me to correct fxz of Indian version please as I've already messed my phone with cid not saved,also if I flash back to Indian fxz will I've any problems flashing as I've CID error?last thing should I delete Boot menu manager & unroot before flashing? All your help highly appreciated
Regards
1. You're sure that your SIMs work, right?
2. Because mine is AT&T, so I don't have any experience flashing cross ROM
Here're what I know from your post:
- I think you can use alcohol to clean your SIM holder
- You don't need to remove BMM or unroot before flashing, just flash it by RSD, like you raze your house and build a new one, you don't care what are inside your home :silly:
Thanks again,I've flashed back to Asia retail using the bat file without using rsd lite,thanks to the developers ,makes things so easy,coming to the sim issue ,even after rolling back to Asia retail the sim problem still there,not detecting sim.it only detects one particular carrier sim that's aircel & its a micro sim whereas our atrix2 has mini sim.I'm really confused now,where am I wrong
You said clean sim holder as in the sim card slot which holds sim card inside the phone or do I clean the sim card ? The chip portion?
Do you think the sim tray is faulty ? If faulty it wouldnt detect any sim ,but it detects micro sim of one particular carrier,I'm sorry to throw so many questions at you,really appreciate your help
Hi,
I meant the golden contact points of your phone, just clean it for sure
But if you already flashed different ROMs or tried many SIM cards then I think there must be problem with your hardware (SIM holder or something else I don't know)
Mini SIM or micro SIM doesn't matter, just the size
To remove cid err on bootlogo, you should try this: http://forum.xda-developers.com/showthread.php?t=2406867
Sent from my Moto G using Tapatalk

Categories

Resources