Related
Pre-requisites:
a) Rooted
b) CWM Installed
c) Sim Unlock Code
I could not find a straight forward way to get the ATT SGH-I727 Unlocked and working on T-mobile so I thought I'd make this short list of instructions for those going through the same trouble.
The first thing I had to do was unlock the phone. I contacted a local company that charged $35. Free options failed. Expect to pay. There were mentions of calling ATT for the unlock code which I did, however, the CSR looked up the IMEI and determined that the unlock code was not YET available. From what I gathered, because the original phone owner was still under the two year agreement, this unlock was on hold until that time period was up. Those that bought their phone outright without a contract are provided their code with a call to customer service.
With the phone unlocked, I still couldn't get the phone to connect to a T-mobile signal. With a tmob sim, either a no-signal icon appeared or the phone simply showed full ATT bars but wouldn't allow T-mobile use in options. Also, *#simunlock# would generate a com.android error.
Finally, the following formula allowed for an unlocked phone picking up T-mobile signal:
1. Install the STOCK ICS UCLF6 4.0.4 - UNTOUCHED - rom following the instructions on that page impeccably.
2. Install Busybox (may not be necessary)
3. Install UCLF6 modified boot Kernel
4. Install T-mobile compatible radio - Blaze_4G_LB7_ICS_Radio_MOD worked for me
Boot it and see if you have a signal. You may need to go to options and manually choose T-mobile.
After that, I was able to install a different ROM. I chose SKY-ICS 4.2F6-2.6.1
With any new rom, you will still need to flash a tmob supported radio.
My s.o. will be using this phone, so I won't be messing with other roms, unfortunately. Let me know if you have a fast and stable configuration.
I hope this helps.
Actually as the radio is deeper than the firmware we flash normally you should only need to flash a tmo radio once unless a rom has radio built in most all roms do not
Sent from my SGH-I727 using Tapatalk 2
Does it make a difference whether I install the stock ics and kernel you provided? All I did is update the phone to ics via kies, install a recovery, flash superuser, then installed the blaze 4g radio. Would it make a difference between doing what you said and what I did?
madmajd said:
Does it make a difference whether I install the stock ics and kernel you provided? All I did is update the phone to ics via kies, install a recovery, flash superuser, then installed the blaze 4g radio. Would it make a difference between doing what you said and what I did?
Click to expand...
Click to collapse
Any luck with that? I'm trying to get mine to work but had to flash a t989 rom on it instead
ziyaad89 said:
Any luck with that? I'm trying to get mine to work but had to flash a t989 rom on it instead
Click to expand...
Click to collapse
It works, but its very crappy, sometimes connects, sometimes doesn't, even followed this post's instructions, still has crappy connection
For those who have T mobile fine on the Skyrocket , how much DL and UP speeds are you getting (and compaired to true T mobile phones data speeds) ? I heard some say they never get more than ~1 or 2 mbps which sucks TBH
Heard this is the hot T-Mobile skyrocket radio.
TELUS_SGH-T989D_LE4_ICS_Radio_MOD.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Digelato said:
Pre-requisites:
a) Rooted
b) CWM Installed
c) Sim Unlock Code
I could not find a straight forward way to get the ATT SGH-I727 Unlocked and working on T-mobile so I thought I'd make this short list of instructions for those going through the same trouble.
The first thing I had to do was unlock the phone. I contacted a local company that charged $35. Free options failed. Expect to pay. There were mentions of calling ATT for the unlock code which I did, however, the CSR looked up the IMEI and determined that the unlock code was not YET available. From what I gathered, because the original phone owner was still under the two year agreement, this unlock was on hold until that time period was up. Those that bought their phone outright without a contract are provided their code with a call to customer service.
With the phone unlocked, I still couldn't get the phone to connect to a T-mobile signal. With a tmob sim, either a no-signal icon appeared or the phone simply showed full ATT bars but wouldn't allow T-mobile use in options. Also, *#simunlock# would generate a com.android error.
Finally, the following formula allowed for an unlocked phone picking up T-mobile signal:
1. Install the STOCK ICS UCLF6 4.0.4 - UNTOUCHED - rom following the instructions on that page impeccably.
2. Install Busybox (may not be necessary)
3. Install UCLF6 modified boot Kernel
4. Install T-mobile compatible radio - Blaze_4G_LB7_ICS_Radio_MOD worked for me
Boot it and see if you have a signal. You may need to go to options and manually choose T-mobile.
After that, I was able to install a different ROM. I chose SKY-ICS 4.2F6-2.6.1
With any new rom, you will still need to flash a tmob supported radio.
My s.o. will be using this phone, so I won't be messing with other roms, unfortunately. Let me know if you have a fast and stable configuration.
I hope this helps.
Click to expand...
Click to collapse
Are you trying to get Call/Text connection or 4G HSPA+ Connect?
Works on WIND too!
I spend a while trying to get this phone working on Wind (Canada's 1700 AWS carrier, similar to Mobilicity / TMo). I've finally succeeded by doing the following.
1: Install latest ICS STOCK
2: Use CWS to flash AT&T UCLF6
I have not been able to get nearfield working with this modem, but it's working great other than that (albeit somewhat slow UL/DL speeds, but that's likely a more wind's crappy network than the phone). Let me know if anyone has any ideas regarding the Nearfield issue.
Just wanted to share. I have been made so freaking happy by the fact that this worked
I bought my SR for full price (549.99) months ago and stupid att also saying my unlock code is not available yet !!
I made the mistake of not meeting at the Verizon store and bought a Galaxy S3 off Craigslist. It has a clean esn but it won't read the 4G sim card. I found out it was flashed to Cricket so I used Odin to flash it back to the original rom that came with the version of the phone which changed it to Baseband version: I535VRLEC but this still won't work it still has the same problem reading the Verizon 4G Sim.
I guess my question is... if there is a different rom I should flash it too? Or is it that once it has been flashed from Verizon to Cricket it can't flashed back to be used on Verizon again?
I would just get a new sim card from Verizon, that may resolve your issues. A few questions:
1) Does it still make calls and texts? The main issue is it doesn't connect to LTE? Maybe I'm not understanding your issue entirely.
2) Does the phone have your phone number and matching IMEI (labeled on the retail box) listed in Settings/About Phone?
You could Odin the stock image VRALF2, VRALEC was a pre-release image. Do not accept the OTA then dial *2767*3855# to reprovision the sim card. Maybe see if this resolves your issues.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
I would just get a new sim card from Verizon, that may resolve your issues. A few questions:
1) Does it still make calls and texts? The main issue is it doesn't connect to LTE? Maybe I'm not understanding your issue entirely.
2) Does the phone have your phone number and matching IMEI (labeled on the retail box) listed in Settings/About Phone?
You could Odin the stock image VRALF2, VRALEC was a pre-release image. Do not accept the OTA then dial *2767*3855# to reprovision the sim card. Maybe see if this resolves your issues.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Well when I brought the phone in the first time to get it activated I was switching from a Droid X so they gave me a new 4G Sim card. But yeah it won't make calls or texts and it won't connect to there 4G data network or pick up the sim.
So are you saying changing it from VRALEC to VRALF2 might fix it?
SlimSnoopOS said:
I would just get a new sim card from Verizon, that may resolve your issues. A few questions:
1) Does it still make calls and texts? The main issue is it doesn't connect to LTE? Maybe I'm not understanding your issue entirely.
2) Does the phone have your phone number and matching IMEI (labeled on the retail box) listed in Settings/About Phone?
You could Odin the stock image VRALF2, VRALEC was a pre-release image. Do not accept the OTA then dial *2767*3855# to reprovision the sim card. Maybe see if this resolves your issues.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Oh yeah and I don't have the box it came in but my phone number did show up in the Settings/About Phone
And at the store they told me it was picking up the Verizon network it just wasn't connecting I guess? so it wouldn't get on the internet or make calls or texts
MR-OZ said:
Well when I brought the phone in the first time to get it activated I was switching from a Droid X so they gave me a new 4G Sim card. But yeah it won't make calls or texts and it won't connect to there 4G data network or pick up the sim.
So are you saying changing it from VRALEC to VRALF2 might fix it?
Oh yeah and I don't have the box it came in but my phone number did show up in the Settings/About Phone
And at the store they told me it was picking up the Verizon network it just wasn't connecting I guess? so it wouldn't get on the internet or make calls or texts
Click to expand...
Click to collapse
What I was saying is that normally people Odin to VRALF2 or VRALG1 then reprovision their sim card. That code will work on VRALEC but I was just trying to put you on a common starting point since we here don't really use the VRALEC stock tar in Odin. Primarily what you'll find in the stickies are VRALF2 and newer images. VRALF2 was the "store bought" earliest software version of the Verizon GSIII from the summer. Its worth a try but consider the following first.
Since you said it doesn't call/text then I think you lost your IMEI. Could you check for me under Settings/About Phone? It should be 15 random numerical digits if I'm not mistaken. If its not 15 digits, it will be 0 or several 0's. Don't post the exact number if it is 15 digits, but tell me what you see.
SlimSnoopOS said:
What I was saying is that normally people Odin to VRALF2 or VRALG1 then reprovision their sim card. That code will work on VRALEC but I was just trying to put you on a common starting point since we here don't really use the VRALEC stock tar in Odin. Primarily what you'll find in the stickies are VRALF2 and newer images. VRALF2 was the "store bought" earliest software version of the Verizon GSIII from the summer. Its worth a try but consider the following first.
Since you said it doesn't call/text then I think you lost your IMEI. Could you check for me under Settings/About Phone? It should be 15 random numerical digits if I'm not mistaken. If its not 15 digits, it will be 0 or several 0's. Don't post the exact number if it is 15 digits, but tell me what you see.
Click to expand...
Click to collapse
No I didn't lose the IMEI it's still there, all 15 digits.
So is it possible to flash a Galaxy S3 from Verizon to Cricket. Then back to Verizon? Is it just a matter of changing to the right software?
MR-OZ said:
No I didn't lose the IMEI it's still there, all 15 digits.
So is it possible to flash a Galaxy S3 from Verizon to Cricket. Then back to Verizon? Is it just a matter of changing to the right software?
Click to expand...
Click to collapse
Honestly I know nothing about flashing to another carrier. It's not something that I have a reason to research so I'm not knowledgeable in that area. My suggestion still is to run that reprovision code since you've already Odin flashed to VRALEC.
EDIT: To clarify, my suggestion is Odin VRALF2 then run the dialer code.
Just as a precaution, you should write down your IMEI, ERI, and maybe even your MIN and PRL version and store them somewhere on your computer. Since you don't actually have the retail box, this should be kept safe if we can't get this current situation straightened out. My reasoning is if you do somehow lose these before you're 100% fixed, having them written down may help you if you need to use one of the IMEI or ERI tools in the dev section.
Did you try flashing a Verizon radio?
HHF2 said:
Did you try flashing a Verizon radio?
Click to expand...
Click to collapse
Yeah I did it switched my Baseband version from VRBLK3 to VRLEC
MR-OZ said:
Yeah I did it switched my Baseband version from VRBLK3 to VRLEC
Click to expand...
Click to collapse
Let's see what happens when you follow section 5 of this thread:
http://forum.xda-developers.com/showthread.php?t=1762709
Use the official VRALG1 4.0.4 firmware, don't accept the OTA prompt, then try the reprovision code.
SlimSnoopOS said:
Let's see what happens when you follow section 5 of this thread:
http://forum.xda-developers.com/showthread.php?t=1762709
Use the official VRALG1 4.0.4 firmware, don't accept the OTA prompt, then try the reprovision code.
Click to expand...
Click to collapse
Hey that did the trick problem solved!
Thank you for taking the time to help me!
MR-OZ said:
Hey that did the trick problem solved!
Thank you for taking the time to help me!
Click to expand...
Click to collapse
Great, I'm happy to help! So calls, texts, and data work? And are you staying stock or are you rooting/unlocking?
SlimSnoopOS said:
Great, I'm happy to help! So calls, texts, and data work? And are you staying stock or are you rooting/unlocking?
Click to expand...
Click to collapse
Yeah.. Data, calls, text it's all working..
And yeah I planned on rooting it I'm just looking at what the best rom would be to flash it to.. any suggestions?
MR-OZ said:
Yeah.. Data, calls, text it's all working..
And yeah I planned on rooting it I'm just looking at what the best rom would be to flash it to.. any suggestions?
Click to expand...
Click to collapse
Ahh, great! When you do just make sure to root, unlock your bootloader, make a nandroid backup in CWM or TWRP recovery, then use the "Comprehensive IMEI /EFS Backup" thread to properly backup your IMEI.
I encourage you to flash roms until you find something you like. I'll suggest that you stay with touchwiz roms then see whether sticking with Samsung's software in its various forms is good enough for you. If not, there's plenty of AOSP to go around!
So you just followed step 5 on the link above and it worked? (flashing with 4.0.4 ROM)
I'm going through a similar issue and been having a hell of a time getting mine to work. Mine was flashed to work on nTelos which is a CDMA provider in my area. I have flashed to just about everything possible (except 4.0.4) and haven't had any luck.
I went to the Verizon store and they tried to activate the phone but they couldn't but game me a sim to use and told me to call back if and when I could get it flashed back.
I tried at one point to take a working sim from another phone but it will not activate..... will not make calls, will not get data etc etc. when I dial 611 it still goes to ntelos.
Someone suggested putting Phone info on and setting the Phone to RUIM but I could not find that setting in Phone Info (even on the correct phone info, after time I found out the original phone info was pulled from the play store and I had to manually download it.
Anyway with the SIM I have and following section 5 as suggested mine does not give the option to accept or deny the OTA so I can try to enter the re-provision code. Should I get hold of the known working SIM to attempt this?
THANK YOU SO MUCH!!
The key to this however is to have a working SIM (the only one in our workplace was from an iPhone 5), I fashioned a nano SIM to mini SIM adapter and got the info on to the phone then my phone could finally be activated however the nano SIM I used got tied to my phone and couldn't be put back to the iPhone 5 it came from lmao... so I had to run to the Verizon store to get my co-workers phone re-activated.
But going down to the 4.0.4 and VRLEC modem then inserting the active sim, reprovision once it activates (it didnt give me the option to not allow it to do anything), then insert the mini sim, call Verizon they got it activated, I just now updated back to 4.1.1 (need to get 4.1.2) and everything is working wonderfully!!
All of this info is extremely refreshing to hear since I have the same problem with one exception. My s3 has a bad charger port. Sent it in for warranty repair and Samsung said it was moisture damaged and corroded and is not covered under warranty (lies). But that is beside the point and another subject.
My question is, can all of this stuff be done through the sd card and not through the USB? I know it is a long shot but any help would be greatly appreciated.
Thanks!
I know this thread is a little old but I just wanted to say thanks, the exact same thing happened to me (phone was previously flashed to cricket but i was unaware until AFTER purchasing and trying to activate)
ODIN Flashing the OMBINATION_I535VRALG1_I535VZWALG1_743127_REV09_user_low_ship.tar.zip package then reprovisioning with the *2767*3855# worked like a charm, I was sweating for a while as the deal was from craigslist
So far as i can tell to do this you NEED to use the VRAL as I tried a few other (newer) stock files and this was the only one that worked
THANKS AGAIN!
Keywords to help other people find this post:
fix radio
verizon from cricket
flash back to verizon
reprovision sim
odin flah back to stock
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
My data worked this way
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Pujan Shrestha said:
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Click to expand...
Click to collapse
I found that the hidden menu (& hence secret code dialing) was disabled in my phone. Following guides from Google search I enabled it. Now codes likes "*#06#",*#1111#", "*#0228#" etc are working, but "*#272*IMEI#" is not working. Any idea, why it is not working?
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
Well, it looks to me as though you've locked your bootloader and are now stuck on 4.4.2. For some reason, Verizon forces Samsung to lock their bootloaders, which means we (the consumers) cannot install "custom" firmware on our devices (or downgrade).
Once you're on 4.4.2 NE1 your stuck with it. No downgrade possible at least not without a Jtag service
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
I have faced similar problem I can't create apn I am using it in India . So my data i not working on any sim card but i can make and receive calls . My android version is also 4.3 . So please help me i want to use both hspa and evdo .
Sent from my iPhone using Tapatalk
I'm not responsible if this damages your phone, attempt at your own risk.
Hi everyone, I have stumbled upon what appears to be a working unlock solution for the G flex 2 (LS996). This is essentially a similar method of unlocking the g3, but with my unlocked by sprint node.db files. Currently MMS and Calling are not working for me on ATT, but data (LTE) and texting works. I beleive I know why calling is not working, as well as MMS, but I am not sure how to fix it, I am new to unlocking using root. Anyways, on to the guide.
First you will need to root your G Flex 2
You will also need Root Browser
Now after you have rooted download the files attached to this post
Next transfer the files to your phone if you did not download on your flex2
*Back up your node.db and node.db-library by adding .bak to the end in /carrier/apps
Once the files you downloaded are on your phone extract them to /carrier/apps
Now restart your phone with your non sprint sim card, or sprint if you are unlocking for future use
When the phone boots you should see that it is recognized, but the carrier still identifies as sprint
Go into settings, more, set mode to global, then go to apn settings and add in your apn
Now you should have full sms and data
This is as far as I have got at the moment, but I am working on calling and mms on at&t, it did appear to be working on Verizon though
Now to where I need some help:
First is calling. I think I have identified the 2 things that may be causing the problems. First is call barring, when I opened up a hidden phone menu it said that incoming, outgoing, etc calls were locked. When I try to enter that submenu to unlock them it says something about the sim or crashes. Next is hd calling. When I dial a number there is a hd symbol next to dialing, I don't know what that is, but if it is sending the call over data I am assuming that there is some type of problem with it sending it to a sprint server or something. If someone can help me figure this out I will be very thankful.
My next problem is MMS, on at&T. Whenever I try to send or download one it does not work. I might just have messed up my apn a few times but I doubt it. The MMS settings in hidden menus show up with sprint settings, and I have tried changing them but they just revert. Could anyone help me out?
PS Sorry about adding two files the first one did not show up when I posted and now I don't know how to remove
I am getting hands free activation now and then please help.Tried everything below.
iginally Posted by tomtam
Try this..
with root explorer : Go to system/app or /system/priv-app folder.
Locate Sprintsyncml. Apk
Rename it to Sprintsyncml. Bak
or
Search for OmaDmclient.apk, then click and hold the file till it popups a secondary menu, in secondary menu select RENAME.
Rename OmaDmclient.apk to OmaDmclient.apk.bak and press ok.
or
LGstartupwizard.apk... Which is located at
/system/priv-app
try this options it should work..it will disable the prompt
Thanks only found LGstartupwizard.apk but it is still popping up after rename..Please help
jmar896 said:
I'm not responsible if this damages your phone, attempt at your own risk.
Hi everyone, I have stumbled upon what appears to be a working unlock solution for the G flex 2 (LS996). This is essentially a similar method of unlocking the g3, but with my unlocked by sprint node.db files. Currently MMS and Calling are not working for me on ATT, but data (LTE) and texting works. I beleive I know why calling is not working, as well as MMS, but I am not sure how to fix it, I am new to unlocking using root. Anyways, on to the guide.
First you will need to root your G Flex 2
You will also need Root Browser
Now after you have rooted download the files attached to this post
Next transfer the files to your phone if you did not download on your flex2
*Back up your node.db and node.db-library by adding .bak to the end in /carrier/apps
Once the files you downloaded are on your phone extract them to /carrier/apps
Now restart your phone with your non sprint sim card, or sprint if you are unlocking for future use
When the phone boots you should see that it is recognized, but the carrier still identifies as sprint
Go into settings, more, set mode to global, then go to apn settings and add in your apn
Now you should have full sms and data
This is as far as I have got at the moment, but I am working on calling and mms on at&t, it did appear to be working on Verizon though
Now to where I need some help:
First is calling. I think I have identified the 2 things that may be causing the problems. First is call barring, when I opened up a hidden phone menu it said that incoming, outgoing, etc calls were locked. When I try to enter that submenu to unlock them it says something about the sim or crashes. Next is hd calling. When I dial a number there is a hd symbol next to dialing, I don't know what that is, but if it is sending the call over data I am assuming that there is some type of problem with it sending it to a sprint server or something. If someone can help me figure this out I will be very thankful.
My next problem is MMS, on at&T. Whenever I try to send or download one it does not work. I might just have messed up my apn a few times but I doubt it. The MMS settings in hidden menus show up with sprint settings, and I have tried changing them but they just revert. Could anyone help me out?
PS Sorry about adding two files the first one did not show up when I posted and now I don't know how to remove
Click to expand...
Click to collapse
first thanks for your effort!! second have you made any progress on gettin at&t working specifically talk and txt?
has any kind of progess been made yet? i suppose with a locked bootloader were gonna hit dead ends
T-mobile US with LTE Data Working
sooo i after this unlock and 2 more from the lg g3. I tried this one again I had no signal now I set it to global mode i got signal bars and its say sprint at the lock screen but in settings it says t-mobile
Text Works
Data works
LTE Data Super Fast
But no phone calling cant dial out phone app will crash and all the signal will disappear
Try dialing with 1 then area code
this is for domestic right? but for international unlock only need to change the files and it will work?
carlosirai said:
this is for domestic right? but for international unlock only need to change the files and it will work?
Click to expand...
Click to collapse
Yes that's true. Take care about permissions setup, use root explorer for that purpose. In three countries I use this phone LTE works mostly in bands 4, I also enabled that band using a guide I found here.
AndroidKing said:
sooo i after this unlock and 2 more from the lg g3. I tried this one again I had no signal now I set it to global mode i got signal bars and its say sprint at the lock screen but in settings it says t-mobile
Text Works
Data works
LTE Data Super Fast
But no phone calling cant dial out phone app will crash and all the signal will disappear
Click to expand...
Click to collapse
try downloading a dialer app from play store and see if that works..please leave feedback
i can unlock but not free^
---------- Post added at 09:32 AM ---------- Previous post was at 09:32 AM ----------
i can unlock but not free^
Fix full hands free activation
How's that?
tungkick said:
i can unlock but not free^
---------- Post added at 09:32 AM ---------- Previous post was at 09:32 AM ----------
i can unlock but not free^
Fix full hands free activation
Click to expand...
Click to collapse
I had the phone unlocked by sprint and can still not hook on to AT&T. What are you offering?
5.1.1 can unlock gsm sim too? Thank You
Changed my build.prof and got calling working flawless, just cant seem to be able to change apn settings.
ro.carrier=spr
ro.build.target_operator=spr
With this, you can also changed the spr to tmo if you want.
Anyone know how to make it so I can change apns?
matistight said:
Changed my build.prof and got calling working flawless, just cant seem to be able to change apn settings.
ro.carrier=spr
ro.build.target_operator=spr
With this, you can also changed the spr to tmo if you want.
Anyone know how to make it so I can change apns?
Click to expand...
Click to collapse
so in build prof did you change ro.carrier to spr or ro.carrier=spr?
have you tried for apn ##data#(##3282#)
dcasun said:
so in build prof did you change ro.carrier to spr or ro.carrier=spr?
have you tried for apn ##data#(##3282#)
Click to expand...
Click to collapse
When in the build.prof editor in Root Toolkit Lite, I simply changed it from "SPR" to "spr".
##data# isn't helping because I dont have the msl/spl. Everytime I go to change the APNs it wont allow me add one in. I can edit files if needed, I just need to be able to edit it haha
matistight said:
When in the build.prof editor in Root Toolkit Lite, I simply changed it from "SPR" to "spr".
##data# isn't helping because I dont have the msl/spl. Everytime I go to change the APNs it wont allow me add one in. I can edit files if needed, I just need to be able to edit it haha
Click to expand...
Click to collapse
What system version were you on?
ian577416 said:
I had the phone unlocked by sprint and can still not hook on to AT&T. What are you offering?
Click to expand...
Click to collapse
How much is it and will it be also international unlocked?
google~android said:
first thanks for your effort!! Second have you made any progress on gettin at&t working specifically talk and txt?
Click to expand...
Click to collapse
where did you find apn settings?
I see. After I flashed to zv8 they apeard. Didn't have any on zv6
carlosirai said:
this is for domestic right? but for international unlock only need to change the files and it will work?
Click to expand...
Click to collapse
@carlosirai, others,
can you help me a bit, as your post intrigued me as follows :
i bought this phone - rooted and unlocked as per method above by ebay seller for international usage.
currently, the phone is technically domestic unlocked and rooted on ZV6. this results in no OTA and node files for SPRINT modified!
as an internationsl user, who will not be using US Domestic providers or Sprint, can i unroot on ZV6? then upgrade to ZV9 then root as/if required and use with an international provider? this usage will be on 3G & LTE ( Bands can be enabled as required, post root )?
thanks in advance!
any help you
abhishek.banerjee said:
@carlosirai, others,
can you help me a bit, as your post intrigued me as follows :
i bought this phone - rooted and unlocked as per method above by ebay seller for international usage.
currently, the phone is technically domestic unlocked and rooted on ZV6. this results in no OTA and node files for SPRINT modified!
as an internationsl user, who will not be using US Domestic providers or Sprint, can i unroot on ZV6? then upgrade to ZV9 then root as/if required and use with an international provider? this usage will be on 3G & LTE ( Bands can be enabled as required, post root )?
thanks in advance!
any help you
Click to expand...
Click to collapse
Yes to all you said.
You need to flash stock zv6 system image and ota update to zv9, then root with zv9 rooted system image and do the "fixes"...
My goal would be to install Cyanogenmod on my SM-G920R7, but haven't been able to find too much help. Any of the rooting methods that seem to work on rest of the S6 variants, doesn't seem to work on this one. There is no TWRP available that I know of.
I would really appreciate any possible help. Thanks in advance.
i have the same problem
I think that this version of the s6 (the cspire version) isn't widely available enough and no one has bothered to make a root for it - ive been searching for a long time and still haven't found anything
I'd like to at least be able to root this thing.. On 5.1.1 now.
I have a rooted cellphone of this version (I purchased it rooted), is there any workaround to unlock GSM/LTE bands on this device?
----
Edit... Okay, so I went back to fresh stock with SmartSwitch, then flashed twrp-3.0.0-0-zerofltespr and Unikernel-v9b-BOH1-920P-100815 via odin 3.10.7, and rooted again... any method to enable gsm on this device yet?
jfarreola said:
I have a rooted cellphone of this version (I purchased it rooted), is there any workaround to unlock GSM/LTE bands on this device?
----
Edit... Okay, so I went back to fresh stock with SmartSwitch, then flashed twrp-3.0.0-0-zerofltespr and Unikernel-v9b-BOH1-920P-100815 via odin 3.10.7, and rooted again... any method to enable gsm on this device yet?
Click to expand...
Click to collapse
How exactly did you root it again? Was it SM-G920R7?
phreak311 said:
How exactly did you root it again? Was it SM-G920R7?
Click to expand...
Click to collapse
Yes, it was SM-G920R7... first, I flashed twrp-3.0.0-0-zerofltespr , then Unikernel-v9b-BOH1-920P-100815 , both via ODIN (you can google both files), note these files are NOT for r7 version (they're for sprint version *g920p*) but they'll root the phone.
I ended up getting rid of the phone as there's afaik no way to enable gsm on it
jfarreola said:
Yes, it was SM-G920R7... first, I flashed twrp-3.0.0-0-zerofltespr , then Unikernel-v9b-BOH1-920P-100815 , both via ODIN (you can google both files), note these files are NOT for r7 version (they're for sprint version *g920p*) but they'll root the phone.
I ended up getting rid of the phone as there's afaik no way to enable gsm on it
Click to expand...
Click to collapse
That's not true. I finally rooted that model and got TWRP installed, and followed the steps to get the Sprint Galaxy S4 domestic SIM unlocked. I finally got data and texting working last night, but I can't get calls to work for some reason on an AT&T SIM card. It even shows up at AT&T as my provider. AFIK it is now SIM unlocked, the only thing not working is calls like I said. I'm sooooo close to getting this working. I need people with this phone that are doing the same thing i'm doing! I only paid $50 for it! lol
Can u help me get mine unlocked , ive already rooted the phone.
shykidd said:
Can u help me get mine unlocked , ive already rooted the phone.
Click to expand...
Click to collapse
How did you root the phone thanks for any help
phreak311 said:
That's not true. I finally rooted that model and got TWRP installed, and followed the steps to get the Sprint Galaxy S4 domestic SIM unlocked. I finally got data and texting working last night, but I can't get calls to work for some reason on an AT&T SIM card. It even shows up at AT&T as my provider. AFIK it is now SIM unlocked, the only thing not working is calls like I said. I'm sooooo close to getting this working. I need people with this phone that are doing the same thing i'm doing! I only paid $50 for it! lol
Click to expand...
Click to collapse
What model did you use and what recovery to root phone
makemesmile said:
What model did you use and what recovery to root phone
Click to expand...
Click to collapse
use root for sprint or us cellular
DEXEIL said:
use root for sprint or us cellular
Click to expand...
Click to collapse
What model will work with my phone I have my backup for if something goes wrong but if I charge the recovery and have some type of issue can I use the stock rom again thanks for your help I had a gs3 rooted and really like it now I got the sm-920r7 what model with sprint or us cellular will work
Root sm-g920r7
lazydude said:
my goal would be to install cyanogenmod on my sm-g920r7, but haven't been able to find too much help. Any of the rooting methods that seem to work on rest of the s6 variants, doesn't seem to work on this one. There is no twrp available that i know of.
I would really appreciate any possible help. Thanks in advance.
Click to expand...
Click to collapse
use the cf auto root download this use google to search first one that comes up use that link go to model sm-g920p cspire and sprint uses
the same network . Use odin to install i have same phone and have mine rooted in this way. So far tried using the sprint version custom rom it will work but you can make phone calls but not the data side for phone internet.
---------- Post added at 04:09 PM ---------- Previous post was at 03:57 PM ----------
makemesmile said:
how did you root the phone thanks for any help
Click to expand...
Click to collapse
use the cf auto root download this use google to search first one that comes up use that link go to model sm-g920p cspire and sprint uses
the same network . Use odin to install i have same phone and have mine rooted in this way. So far tried using the sprint version custom rom it will work but you can make phone calls but not the data side for phone internet. Make sure you go to phone settings under find my phone and turn off reactivation lock
Any way to get the G920P roms to work on this variant? I've had luck with them with other c-spire/ntelos/r7 phones in the past. I'd like to flash Renegade to it...
blazie151 said:
Any way to get the G920P roms to work on this variant? I've had luck with them with other c-spire/ntelos/r7 phones in the past. I'd like to flash Renegade to it...
Click to expand...
Click to collapse
It works but the phone data Internet won't work can make phone calls and sprints annoying activation keeps posing up and even tried the pit file for cspire no change on that
Sent from my SM-G920R7 using Tapatalk
Wonder if anyone has got calls working using GSM sim card? I have the cspire G920R7 rooted with LTE data working using AT&T sim.
Won't receive calls (straight to vmail) and when placing calls dialer says CALL ENDED immediatly after dialing.
hmmm.
TEC602 said:
Wonder if anyone has got calls working using GSM sim card? I have the cspire G920R7 rooted with LTE data working using AT&T sim.
Won't receive calls (straight to vmail) and when placing calls dialer says CALL ENDED immediatly after dialing.
hmmm.
Click to expand...
Click to collapse
I'm working on this too. So far I've got the same situation as you, Data works but no calls/text.
in a few weeks the person who wants me to unlock this phone for them is switching carriers and plans on buying a new phone to use until I can unlock the S6, so I'll have more time to mess with it then.
There's a few things I want to try, but I can't post links here (XDA rules).
One involves Rooting and using a service code to unlock the bands (google "TeamUSCellular GSM unlock S6")
The other also requires rooting and involves using "galaxy tools" to unlock the bands (not sure if this app works with marshmallow, though) (google "theandroidsoul how to sim unlock sprint galaxy S6")
My hopes are not high for getting this phone to work fully. I've also been trying to get custom ROMs to work, but I can't get the cell radio to work at all on custom ROMs. Even with the stock SM-G920R7 Kernel straight from the latest update .tar
Sean89us said:
I'm working on this too. So far I've got the same situation as you, Data works but no calls/text.
.......
Click to expand...
Click to collapse
Thanks for the suggestion, yeah I have tried galaxy tools (GT) to change the phone mode to LTE/GSM auto and tried different CSC values, and accessed the hidden menus through there. The sim unlock in GT asks for a code which I dont know, but the phone doesn't seem to be locked anyway since it doesn't care when I try different sim cards. Weird thing is the GT app doesn't work very well (most hidden menus not working) on the current rom i'm using but worked better on the stock cspire rom. Note, I tried using MSL 000000 in ##3282# data menu and it works but most the settings in there don't seem to be applicable to GSM networks.
Currently I'VE been messing with the build.prop file, also tried the CDMA to GSM flashable zip which edits the build.prop but nothing has gotten better. One time after editing the build.prop the phone would only turn on with a blank screen and vibrate every few seconds, that was SCARY. Also was planning on flashing other radio/modem but having trouble finding many of those files and pulling them from roms seems difficult to get the correct file to flash on odin.
TEC602 said:
Thanks for the suggestion, yeah I have tried galaxy tools (GT) to change the phone mode to LTE/GSM auto and tried different CSC values, and accessed the hidden menus through there. The sim unlock in GT asks for a code which I dont know, but the phone doesn't seem to be locked anyway since it doesn't care when I try different sim cards. Weird thing is the GT app doesn't work very well (most hidden menus not working) on the current rom i'm using but worked better on the stock cspire rom. Note, I tried using MSL 000000 in ##3282# data menu and it works but most the settings in there don't seem to be applicable to GSM networks.
Currently I'VE been messing with the build.prop file, also tried the CDMA to GSM flashable zip which edits the build.prop but nothing has gotten better. One time after editing the build.prop the phone would only turn on with a blank screen and vibrate every few seconds, that was SCARY. Also was planning on flashing other radio/modem but having trouble finding many of those files and pulling them from roms seems difficult to get the correct file to flash on odin.
Click to expand...
Click to collapse
I'm not sure you'll even be able to flash other models' modem..? I can't say I've ever tried.
Anyway, getting your hands on the firmware is easy. Just use SamFirm (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647)
To use it, just input the model number (SM-G920R7/R4/P/V/T/A) and the region code, then select "auto".
Region codes and model numbers:
C-Spire: ACG (SM-G920R7)
US-Cellular: USC (SM-G920R4)
Sprint: SPR (SM-G920P)
Verizon: VZW (Locked out from download, app can't download) (SM-G920V)
T-mobile: TMB (SM-G920T)
ATT: ATT (Locked out from download, app can't download) (SM-G920A)
This app downloads firmwares directly from Samsung servers, so the download is really fast and guaranteed to be perfect/stock.
**the SM-G920R7 is closest related to the SM-G920R4 (US Cellular) & SM-G920P (Sprint). The US Cellular one recently supports GSM Bands natively without any rooting/messing with hidden settings, so that's where i'd start. You may not even need the baseband/modem, just flash the rom? I'm not sure. Good luck dude It'd be awesome if you get it working
*** Also, make sure you have a backup of your EFS before messing with the modem. Apparently if you flash an incompatible modem you can erase/corrupt the EFS partition and lose your IMEI. Hell, make a FULL backup with TWRP, and make sure that backup is copied over to your computer before doing any flashing. You can't be too careful with this.
Haven't had any luck flashing stock firmware or modems from other models using Odin, errors with a security message or something, tried G920A and G920R4. Probably for the best I suppose. Flashing custom roms has not been a problem, even if the don't work properly. Wonder if there is a test mode or way to use logcat to see why calls don't proceed like normal. Never worked on going CDMA to GSM before, I always did CDMA to CDMA in the past.