my sony xperia l is having display problems.i have rooted my phone and unlocked bootloader.Then i had flashed kernel thunderzap 3.0.
now when i turn on my phone and turn off display using power key, it's turned off ,but it does not turn back on when i press the power key again, but the phone is still on.What should i do?....
PLEASE DO HELP ME.....thanks in advance
jacobthomas said:
my sony xperia l is having display problems.i have rooted my phone and unlocked bootloader.Then i had flashed kernel thunderzap 3.0.
now when i turn on my phone and turn off display using power key, it's turned off ,but it does not turn back on when i press the power key again, but the phone is still on.What should i do?....
PLEASE DO HELP ME.....thanks in advance
Click to expand...
Click to collapse
Sounds like you've flash wrong kernel..try another kernel that matched your fw
faizalotai said:
Sounds like you've flash wrong kernel..try another kernel that matched your fw
Click to expand...
Click to collapse
i tried to flash thunderzap 4.6 latest but it got stuck at boot animation,then i had to flash thunderzap 3.0 again....
it is just that once the screen is off it does turn back on,the same case when i made a call,....pls help.....
jacobthomas said:
i tried to flash thunderzap 4.6 latest but it got stuck at boot animation,then i had to flash thunderzap 3.0 again....
it is just that once the screen is off it does turn back on,the same case when i made a call,....pls help.....
Click to expand...
Click to collapse
I think that you are still on JB. Latest Thunderzap for Jelly Bean is 4.1 - r2. Thunderzap 4.6 is for Kit Kat that's why you got bootloop before bootanimation. Try 4.1 - r2 and you will see TZ 3.0 is quite old it might have some bugs.
Related
Hi,
Here's my problem:
I can't get my tipo to work after flashing this kernel. When i flash fxp kernel or stock everything works but after flashing Vengeance when turn on my phone it vibrates and nothing happens after several attempts of pulling out battery and restarting led starts flashing diffrent colors but when i push volume buttons it turns green and nothing happens or led turns off.
Please tell me what could be the possibility of my problem. I wanted to use this kernel with gimlo rom but now im using it with stock kernel
The first time after you flash this kernel... switching on takes time.... be patient... wait for some time after the vibrate...
also, its device specific... but I'm having trouble using twrp, though cwm is stable... so wait for the white led and go into cwm.....
Sent from my ST21i using xda app-developers app
m1szczu said:
Hi,
Here's my problem:
I can't get my tipo to work after flashing this kernel. When i flash fxp kernel or stock everything works but after flashing Vengeance when turn on my phone it vibrates and nothing happens after several attempts of pulling out battery and restarting led starts flashing diffrent colors but when i push volume buttons it turns green and nothing happens or led turns off.
Please tell me what could be the possibility of my problem. I wanted to use this kernel with gimlo rom but now im using it with stock kernel
Click to expand...
Click to collapse
be aware that Vengeance is ONLY compatible with stock rom. CM won't work with this.
Use gimlo or stock sony's firmware.
There's no other way.
i'm not able to get my xperia L in flash mode...i'm holding the volume down button and connected my device..a green light blinks and goes off...flashing doesn't start at all..i've installed clean n tweaked rom...every tym after booting up it says unfortunately system ui has been stopped....there is no notification bar nd navigation buttons...how to make my phone normal...can anyone solve this urgently...i'm not able to do anything since morning :crying:
Let me guese you haven't made a nandroid backup ? try this:
Wipe everything and installed v1...
Reboot...
Turn off...
Manually entered cwm installed v2...
Reboot...
Done
damian01211 said:
Let me guese you haven't made a nandroid backup ? try this:
Wipe everything and installed v1...
Reboot...
Turn off...
Manually entered cwm installed v2...
Reboot...
Done
Click to expand...
Click to collapse
i've did the same process...even though i got "unfortunately system ui has been stopped"...i've flashed 3 times..same thing happened..at last i don't know how it has been solved..the problem didn't occur in 4th flash...but now i got the wifi problem...i'm on extended stock kernel v3
ghostzz said:
i'm not able to get my xperia L in flash mode...i'm holding the volume down button and connected my device..a green light blinks and goes off...flashing doesn't start at all..i've installed clean n tweaked rom...every tym after booting up it says unfortunately system ui has been stopped....there is no notification bar nd navigation buttons...how to make my phone normal...can anyone solve this urgently...i'm not able to do anything since morning :crying:
Click to expand...
Click to collapse
hold volume down button first. Then try connecting. It should be in flashmode.
Sent from within a Titan's stomach.
ghostzz said:
i've did the same process...even though i got "unfortunately system ui has been stopped"...i've flashed 3 times..same thing happened..at last i don't know how it has been solved..the problem didn't occur in 4th flash...but now i got the wifi problem...i'm on extended stock kernel v3
Click to expand...
Click to collapse
When you're ready to flash v2 DON'T wipe anything...
For wi-fi flash modules for v3...
allenwalker1998 said:
hold volume down button first. Then try connecting. It should be in flashmode.
Sent from within a Titan's stomach.
Click to expand...
Click to collapse
Yeah..i've done in the same manner...but the green notification light just blinks & goes off...in flashtool it says that device is connected in flashmode but I don't find notification light on..and even the the process doesn't start at all in the flashtool...
Sent from my C2104 using xda app-developers app
kazabubu said:
When you're ready to flash v2 DON'T wipe anything...
For wi-fi flash modules for v3...
Click to expand...
Click to collapse
Got rid of that...flashed vengeance test kernel and modules..i got wifi now
Sent from my C2104 using xda app-developers app
ghostzz said:
i'm not able to get my xperia L in flash mode...i'm holding the volume down button and connected my device..a green light blinks and goes off...flashing doesn't start at all..i've installed clean n tweaked rom...every tym after booting up it says unfortunately system ui has been stopped....there is no notification bar nd navigation buttons...how to make my phone normal...can anyone solve this urgently...i'm not able to do anything since morning :crying:
Click to expand...
Click to collapse
This Is A Critical Situation,When you are a beginner,But Dont Worry Not So Critical!
I Dont Wanna Give you some complex answers at this state..all i can do for you is as easy as this!-
Even I Have Gone Through These Problems!
If You Simply Want to get your phone back, Use this Simple Trick(They Generally Work for all xperia devices)
Why not download SUS(Sony Update Service){THAT WOULD CERTAINLY FLASH THE STOCK JB,BUT YOUR PHONE WILL BE ALRIGHT THEN}
[You Can AGain Flash your custom ROM After doing this]-
Try This One Bro,
repair your phone with SUS
Sony Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymob...-2.11.12.5.exe
Dont Forget To Hit Thanks BTW if i helped..
this is the problem...what to do??
ghostzz said:
this is the problem...what to do??
Click to expand...
Click to collapse
I think you must have the last flashtool..
Sent from my C2105 using xda app-developers app
Hi,
I have a xperia e dual and was using NoZ rom (stock JB based ) till now. I recently installed the XboosT (stock ICS based) rom. After flashing the rom via twrp everything was okay except i was facing the baseband problem and also the battery was always showing 100%. So i tried to flash the baseband ftf file. But after i flashed the ftf and rebooted using flashtool, my mob is not switching on. When i press the power button, the device is vibrating, but not even the sony logo is showing. I tried charging it for 10+ hours, but nothing improved. I am unable to find what may be wrong. Please if possible suggest some possible solution . Thanks in advance.
bornstar4u said:
Hi,
I have a xperia e dual and was using NoZ rom (stock JB based ) till now. I recently installed the XboosT (stock ICS based) rom. After flashing the rom via twrp everything was okay except i was facing the baseband problem and also the battery was always showing 100%. So i tried to flash the baseband ftf file. But after i flashed the ftf and rebooted using flashtool, my mob is not switching on. When i press the power button, the device is vibrating, but not even the sony logo is showing. I tried charging it for 10+ hours, but nothing improved. I am unable to find what may be wrong. Please if possible suggest some possible solution . Thanks in advance.
Click to expand...
Click to collapse
Can you enter flashmode or fastboot mode?
This prob usually arises when you flash an incompatible kernel. It fails to start.
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
yes i can enter in fastboot and flashmode. In fastboot mode, when i type in the command fastboot devices, it is showing my device. I even flashed the ftf again even if the mob was not switching on. Is my mob bricked?
bornstar4u said:
yes i can enter in fastboot and flashmode. In fastboot mode, when i type in the command fastboot devices, it is showing my device. I even flashed the ftf again even if the mob was not switching on. Is my mob bricked?
Click to expand...
Click to collapse
Try Using Flashtool to flash the stock kernel or the last known working kernel using fastboot.
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
ok ... i am downloading the ics stock rom ftf now . Will try to flash that. Thanks !
i flashed the stock ics ftf file successfully using flashtool, but now the device is always getting connected in flashmode(even when connected to charger). As i dont have any battery left, i can't start and the phone won't even charge
Steps to Charge the Phone.
bornstar4u said:
i flashed the stock ics ftf file successfully using flashtool, but now the device is always getting connected in flashmode(even when connected to charger). As i dont have any battery left, i can't start and the phone won't even charge
Click to expand...
Click to collapse
To charge your phone follow these steps dude !
1. Pull out your battery first !
2. Plug-in charger now to the phone without battery inserted.
3. Now you'll see an LED glowing which is usually used while normal charging.
4. Insert your battery while pressing the back button and make sure the charger is connected with the phone while doing this process.
5. Now your phone will be charging. Have a nice day ! cheers...
JiMiTVAiDYA said:
To charge your phone follow these steps dude !
1. Pull out your battery first !
2. Plug-in charger now to the phone without battery inserted.
3. Now you'll see an LED glowing which is usually used while normal charging.
4. Insert your battery while pressing the back button and make sure the charger is connected with the phone while doing this process.
5. Now your phone will be charging. Have a nice day ! cheers...
Click to expand...
Click to collapse
thanks for the reply .. although my problem is solved now ... phone is now working fine
I Tried to install custom rom by first unlocking bootloader then flashing 11.3.A.2.33 in my xperia c1504 then I tried to flash 11.3.A.2.23 (bcoz wifi wasn't working in 11.3.A.2.33) suddenly it goes off in flash mode and does operate. Then I reflashed 11.3.A.2.33 but then my phone stuck in showing sony only. Plz help!!! Really urgent
I am using sony xpeira j.. i installed cyanogenmod 10 custom rom..when i am trying to flash paraandroid over it using cwm recovery..my phone is bricked..cant run into cwm recovery.
my screen is dead..no logo or anything....i already have recovery in the sdcard.
not able to get it..please help...
vickyman said:
I am using sony xpeira j.. i installed cyanogenmod 10 custom rom..when i am trying to flash paraandroid over it using cwm recovery..my phone is bricked..cant run into cwm recovery.
my screen is dead..no logo or anything....i already have recovery in the sdcard.
not able to get it..please help...
Click to expand...
Click to collapse
Can I get a link to the thread where PA was? I'll be able to help more after.
Hey,
To recover from your brick:
http://forum.xda-developers.com/showthread.php?t=2631456
Have a nice day!
Happy!!!!
gamer649 said:
Can I get a link to the thread where PA was? I'll be able to help more after.
Click to expand...
Click to collapse
Thanks for Your Reply...I recovered my phone..I guess it was due to corrupted cwm recovery..fortunately i was able to connect my device in flashboot mode..i got back download mode using flashtool!!
The problem now is fonts of parandroid and everything is too small..i think it thought my phone is a big size tablet..... everything is ultra small..now i flashed my previous cyanogenmod..
this is the thread....http://forum.xda-developers.com/showthread.php?t=2220631....Once again THANKS..
Thanks.
MatsPunt said:
Hey,
To recover from your brick:
http://forum.xda-developers.com/showthread.php?t=2631456
Have a nice day!
Click to expand...
Click to collapse
Thanks for the thread...I recovered my phone...
sony xperia tipo bricked
i tried installing aokp rom on my xperia tipo, when it comopleted my phone turned black, when i reinsert my battery the sony logo comes up but the turns back on. after that happens i cant do anything on my phone anymore i.e wont turn on unless i reinsert my battery. please can someone help me since i dont want my dad finding out thanks
yassintipo said:
i tried installing aokp rom on my xperia tipo, when it comopleted my phone turned black, when i reinsert my battery the sony logo comes up but the turns back on. after that happens i cant do anything on my phone anymore i.e wont turn on unless i reinsert my battery. please can someone help me since i dont want my dad finding out thanks
Click to expand...
Click to collapse
dude, make your own topic.
I think i bricked my phone for ever, about a month ago, i flashed a wrong kernel, since that day, my phone wont go to flashmode only fastboot, i've tried to flash a kernel, but still the same, theres any way i can recover my phone? since the only thing that works is fastboot?? thanks, and sorry for my horrible english..
oh, and is a XPERIA E3 D2212
i think i actually flashed a 03 kernel.. so please help me.
BrunoArmstrongLinchestein said:
I think i bricked my phone for ever, about a month ago, i flashed a wrong kernel, since that day, my phone wont go to flashmode only fastboot, i've tried to flash a kernel, but still the same, theres any way i can recover my phone? since the only thing that works is fastboot?? thanks, and sorry for my horrible english..
oh, and is a XPERIA E3 D2212
i think i actually flashed a 03 kernel.. so please help me.
Click to expand...
Click to collapse
If fastboot mode is working in your mobile then you can flash stock kernel or hybrid kernel to get back your d2212..
I suggest u to flash hybrid kernel in fastboot mode by extracting the boot.img file in the hybrid.zip and flash it by fastboot mode using flashtool..
Try and tell me what happened..
vijaywwe said:
If fastboot mode is working in your mobile then you can flash stock kernel or hybrid kernel to get back your d2212..
I suggest u to flash hybrid kernel in fastboot mode by extracting the boot.img file in the hybrid.zip and flash it by fastboot mode using flashtool..
Try and tell me what happened..
Click to expand...
Click to collapse
yes, i know, but i think its a firmware thing, i flash a kernel, but doesnt seems to write...
i did what you said, but with no success, my phone still stucked in boot logo, and when i go to flashmode it doesnt get recognized by computer, and its not a computer problem, cause i have 2 computers and both doesnt work, just work the fastboot mode, which dont seem to write anything, i think my phone is dead... Bootloader maybe? there are any fixes?
BrunoArmstrongLinchestein said:
I think i bricked my phone for ever, about a month ago, i flashed a wrong kernel, since that day, my phone wont go to flashmode only fastboot, i've tried to flash a kernel, but still the same, theres any way i can recover my phone? since the only thing that works is fastboot?? thanks, and sorry for my horrible english..
oh, and is a XPERIA E3 D2212
i think i actually flashed a 03 kernel.. so please help me.
Click to expand...
Click to collapse
is the problem like
red led blinking thrice and one sec interval then again red led blinking thrice
if yes I think I can help u
Sunderesh said:
is the problem like
red led blinking thrice and one sec interval then again red led blinking thrice
if yes I think I can help u
Click to expand...
Click to collapse
yes, its a red led blinking when i try to enter flashmode
BrunoArmstrongLinchestein said:
yes, its a red led blinking when i try to enter flashmode
Click to expand...
Click to collapse
dude there a senior member in XDA whoz name is Uncle Lucifer pm him he will help u
drop a thanks to the reply n plZz do donate a a can or 2 of beer to Uncle Lucifer too