Hi,
Here's my problem:
I can't get my tipo to work after flashing this kernel. When i flash fxp kernel or stock everything works but after flashing Vengeance when turn on my phone it vibrates and nothing happens after several attempts of pulling out battery and restarting led starts flashing diffrent colors but when i push volume buttons it turns green and nothing happens or led turns off.
Please tell me what could be the possibility of my problem. I wanted to use this kernel with gimlo rom but now im using it with stock kernel
The first time after you flash this kernel... switching on takes time.... be patient... wait for some time after the vibrate...
also, its device specific... but I'm having trouble using twrp, though cwm is stable... so wait for the white led and go into cwm.....
Sent from my ST21i using xda app-developers app
m1szczu said:
Hi,
Here's my problem:
I can't get my tipo to work after flashing this kernel. When i flash fxp kernel or stock everything works but after flashing Vengeance when turn on my phone it vibrates and nothing happens after several attempts of pulling out battery and restarting led starts flashing diffrent colors but when i push volume buttons it turns green and nothing happens or led turns off.
Please tell me what could be the possibility of my problem. I wanted to use this kernel with gimlo rom but now im using it with stock kernel
Click to expand...
Click to collapse
be aware that Vengeance is ONLY compatible with stock rom. CM won't work with this.
Use gimlo or stock sony's firmware.
There's no other way.
Related
Anyone one else experiencing a stall when rebooting using SKy ICS 4,2F-4.5A?
If I reboot either from CWM or from using the drop down or the power button, the phone hangs up with a black screen and all the LED buttons lit up? Then I have to hold the power button down to do a hard reboot.
I have reflashed numerous times and have come through numerous updates and this one issue persists.
Anyone?
Rogers
Kernel RUXLF3
Update 4.2F - 4.5A
Radio:UCLF5
No problem here. You have installed busy box, fixed permissions, and the usual stuff?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I got the exact same issue, busy box installed, permissions fixed. Tried flashing everything again didn't solve it, kernel etc.
The only thing I didn't try is radio, are you using rogers radio as well?
Also it happens if I just try shut down the phone.
Try doing a backup in cwm, then just immediately restore that backup... often fixes that problem for me on sky ics.
kishke said:
I got the exact same issue, busy box installed, permissions fixed. Tried flashing everything again didn't solve it, kernel etc.
The only thing I didn't try is radio, are you using rogers radio as well?
Also it happens if I just try shut down the phone.
Click to expand...
Click to collapse
I got it resolved but only by fluke. Flashed 4.2-5b as well as the CYMBALINE kernel (an attempt to resolve bluetooth connection issues) and now everything boots fine.
Thanks
I flashed the kernel without it being solved. I did the backup+restore and I think it seems to have fixed it, I'll do some more checking tomorrow kinda late here but thanks!
Btw after you flashed 4.5a you didn't need to flash b
Had the same problem after doing a fresh 4.2 R2 base install. I let the phone fully cache (5 mins or so) and I tried rebooting to CWM to flash the 5A update and the phone hung on shutdown and my cap lights stayed lit up. I realized I forgot to install busybox after 1st boot-up per the OP instructions. So I held power button for 10secs, rebooted, installed busybox and it rebooted fine into CWM to flash update. Weird, never seen that before.
DudelePOWski said:
Anyone one else experiencing a stall when rebooting using SKy ICS 4,2F-4.5A?
If I reboot either from CWM or from using the drop down or the power button, the phone hangs up with a black screen and all the LED buttons lit up? Then I have to hold the power button down to do a hard reboot.
I have reflashed numerous times and have come through numerous updates and this one issue persists.
Anyone?
Rogers
Kernel RUXLF3
Update 4.2F - 4.5A
Radio:UCLF5
Click to expand...
Click to collapse
Running Rogers ICS stock here rooted and busybox first, then flashed the modded UXCLF3 Kernel, hangs on the Rogers animation and the touch keys stay on whenever I try to shut down or reboot the phone, have to pull the battery all the time, trying the Backup + Restore route now, hope it works otherwise I'll have a brick and a phone that won't turn off
howlingmoon12 said:
Running Rogers ICS stock here rooted and busybox first, then flashed the modded UXCLF3 Kernel, hangs on the Rogers animation and the touch keys stay on whenever I try to shut down or reboot the phone, have to pull the battery all the time, trying the Backup + Restore route now, hope it works otherwise I'll have a brick and a phone that won't turn off
Click to expand...
Click to collapse
It worked for me, worst case you can hold the power key for 10s to turn it off.
The issue me and I think also the other guy had was black screen and touch key lights.
DudelePOWski said:
Anyone one else experiencing a stall when rebooting using SKy ICS 4,2F-4.5A?
If I reboot either from CWM or from using the drop down or the power button, the phone hangs up with a black screen and all the LED buttons lit up? Then I have to hold the power button down to do a hard reboot.
I have reflashed numerous times and have come through numerous updates and this one issue persists.
Anyone?
Rogers
Kernel RUXLF3
Update 4.2F - 4.5A
Radio:UCLF5
Click to expand...
Click to collapse
This has been answered in the dev thread. Here is the solution . You need to flash it with cwm touch. I have no idea why but with cwm the older cwm you get hung up rebooting or shutting down. It will also hang when fixing permissions. I have also read that twrp was working also.
Cwm touch can be found here half way down the thread.
http://forum.xda-developers.com/showthread.php?t=1704630
Sent from my SAMSUNG-SGH-I727 using xda premium
I had it and I'm using cwm touch 5.8.1.3 .
if all else fails check the md5 checksums of all downlads, or redownload and check its md5, use touch cwm or as sean is using it now twrp recovery, and read my sig
kishke said:
I flashed the kernel without it being solved. I did the backup+restore and I think it seems to have fixed it, I'll do some more checking tomorrow kinda late here but thanks!
Btw after you flashed 4.5a you didn't need to flash b
Click to expand...
Click to collapse
I went from 4.5a update (fresh base install) to 5b update.
i'm not able to get my xperia L in flash mode...i'm holding the volume down button and connected my device..a green light blinks and goes off...flashing doesn't start at all..i've installed clean n tweaked rom...every tym after booting up it says unfortunately system ui has been stopped....there is no notification bar nd navigation buttons...how to make my phone normal...can anyone solve this urgently...i'm not able to do anything since morning :crying:
Let me guese you haven't made a nandroid backup ? try this:
Wipe everything and installed v1...
Reboot...
Turn off...
Manually entered cwm installed v2...
Reboot...
Done
damian01211 said:
Let me guese you haven't made a nandroid backup ? try this:
Wipe everything and installed v1...
Reboot...
Turn off...
Manually entered cwm installed v2...
Reboot...
Done
Click to expand...
Click to collapse
i've did the same process...even though i got "unfortunately system ui has been stopped"...i've flashed 3 times..same thing happened..at last i don't know how it has been solved..the problem didn't occur in 4th flash...but now i got the wifi problem...i'm on extended stock kernel v3
ghostzz said:
i'm not able to get my xperia L in flash mode...i'm holding the volume down button and connected my device..a green light blinks and goes off...flashing doesn't start at all..i've installed clean n tweaked rom...every tym after booting up it says unfortunately system ui has been stopped....there is no notification bar nd navigation buttons...how to make my phone normal...can anyone solve this urgently...i'm not able to do anything since morning :crying:
Click to expand...
Click to collapse
hold volume down button first. Then try connecting. It should be in flashmode.
Sent from within a Titan's stomach.
ghostzz said:
i've did the same process...even though i got "unfortunately system ui has been stopped"...i've flashed 3 times..same thing happened..at last i don't know how it has been solved..the problem didn't occur in 4th flash...but now i got the wifi problem...i'm on extended stock kernel v3
Click to expand...
Click to collapse
When you're ready to flash v2 DON'T wipe anything...
For wi-fi flash modules for v3...
allenwalker1998 said:
hold volume down button first. Then try connecting. It should be in flashmode.
Sent from within a Titan's stomach.
Click to expand...
Click to collapse
Yeah..i've done in the same manner...but the green notification light just blinks & goes off...in flashtool it says that device is connected in flashmode but I don't find notification light on..and even the the process doesn't start at all in the flashtool...
Sent from my C2104 using xda app-developers app
kazabubu said:
When you're ready to flash v2 DON'T wipe anything...
For wi-fi flash modules for v3...
Click to expand...
Click to collapse
Got rid of that...flashed vengeance test kernel and modules..i got wifi now
Sent from my C2104 using xda app-developers app
ghostzz said:
i'm not able to get my xperia L in flash mode...i'm holding the volume down button and connected my device..a green light blinks and goes off...flashing doesn't start at all..i've installed clean n tweaked rom...every tym after booting up it says unfortunately system ui has been stopped....there is no notification bar nd navigation buttons...how to make my phone normal...can anyone solve this urgently...i'm not able to do anything since morning :crying:
Click to expand...
Click to collapse
This Is A Critical Situation,When you are a beginner,But Dont Worry Not So Critical!
I Dont Wanna Give you some complex answers at this state..all i can do for you is as easy as this!-
Even I Have Gone Through These Problems!
If You Simply Want to get your phone back, Use this Simple Trick(They Generally Work for all xperia devices)
Why not download SUS(Sony Update Service){THAT WOULD CERTAINLY FLASH THE STOCK JB,BUT YOUR PHONE WILL BE ALRIGHT THEN}
[You Can AGain Flash your custom ROM After doing this]-
Try This One Bro,
repair your phone with SUS
Sony Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymob...-2.11.12.5.exe
Dont Forget To Hit Thanks BTW if i helped..
this is the problem...what to do??
ghostzz said:
this is the problem...what to do??
Click to expand...
Click to collapse
I think you must have the last flashtool..
Sent from my C2105 using xda app-developers app
Hi,
I have a xperia e dual and was using NoZ rom (stock JB based ) till now. I recently installed the XboosT (stock ICS based) rom. After flashing the rom via twrp everything was okay except i was facing the baseband problem and also the battery was always showing 100%. So i tried to flash the baseband ftf file. But after i flashed the ftf and rebooted using flashtool, my mob is not switching on. When i press the power button, the device is vibrating, but not even the sony logo is showing. I tried charging it for 10+ hours, but nothing improved. I am unable to find what may be wrong. Please if possible suggest some possible solution . Thanks in advance.
bornstar4u said:
Hi,
I have a xperia e dual and was using NoZ rom (stock JB based ) till now. I recently installed the XboosT (stock ICS based) rom. After flashing the rom via twrp everything was okay except i was facing the baseband problem and also the battery was always showing 100%. So i tried to flash the baseband ftf file. But after i flashed the ftf and rebooted using flashtool, my mob is not switching on. When i press the power button, the device is vibrating, but not even the sony logo is showing. I tried charging it for 10+ hours, but nothing improved. I am unable to find what may be wrong. Please if possible suggest some possible solution . Thanks in advance.
Click to expand...
Click to collapse
Can you enter flashmode or fastboot mode?
This prob usually arises when you flash an incompatible kernel. It fails to start.
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
yes i can enter in fastboot and flashmode. In fastboot mode, when i type in the command fastboot devices, it is showing my device. I even flashed the ftf again even if the mob was not switching on. Is my mob bricked?
bornstar4u said:
yes i can enter in fastboot and flashmode. In fastboot mode, when i type in the command fastboot devices, it is showing my device. I even flashed the ftf again even if the mob was not switching on. Is my mob bricked?
Click to expand...
Click to collapse
Try Using Flashtool to flash the stock kernel or the last known working kernel using fastboot.
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
ok ... i am downloading the ics stock rom ftf now . Will try to flash that. Thanks !
i flashed the stock ics ftf file successfully using flashtool, but now the device is always getting connected in flashmode(even when connected to charger). As i dont have any battery left, i can't start and the phone won't even charge
Steps to Charge the Phone.
bornstar4u said:
i flashed the stock ics ftf file successfully using flashtool, but now the device is always getting connected in flashmode(even when connected to charger). As i dont have any battery left, i can't start and the phone won't even charge
Click to expand...
Click to collapse
To charge your phone follow these steps dude !
1. Pull out your battery first !
2. Plug-in charger now to the phone without battery inserted.
3. Now you'll see an LED glowing which is usually used while normal charging.
4. Insert your battery while pressing the back button and make sure the charger is connected with the phone while doing this process.
5. Now your phone will be charging. Have a nice day ! cheers...
JiMiTVAiDYA said:
To charge your phone follow these steps dude !
1. Pull out your battery first !
2. Plug-in charger now to the phone without battery inserted.
3. Now you'll see an LED glowing which is usually used while normal charging.
4. Insert your battery while pressing the back button and make sure the charger is connected with the phone while doing this process.
5. Now your phone will be charging. Have a nice day ! cheers...
Click to expand...
Click to collapse
thanks for the reply .. although my problem is solved now ... phone is now working fine
I Tried to install custom rom by first unlocking bootloader then flashing 11.3.A.2.33 in my xperia c1504 then I tried to flash 11.3.A.2.23 (bcoz wifi wasn't working in 11.3.A.2.33) suddenly it goes off in flash mode and does operate. Then I reflashed 11.3.A.2.33 but then my phone stuck in showing sony only. Plz help!!! Really urgent
After I installed a custom ROM, Pyrana to be exact my tablet wont turn off, but I don't think that is the problem because it happens on every custom ROM, except for legit stock. Any help would be appreciated
Can you be specific?
What happens instead of the tablet powering off?
Sent from my Nexus 7 using xda premium
Sorry about that, when I click turn off it turns off and instantly turns back on
Some further details: The custom rom boots correctly and you can use it? And which recovery are you using?
Sent from my GT-P5100 using xda app-developers app
The ROM (Pyrana Stock Custom) is completely functional, I am using TWRP 2.7.0.0
*BUMP*
nicegamer7 said:
*BUMP*
Click to expand...
Click to collapse
you sure that the correct rom for your tab.....never heard of pyrana or anything even close to that. i have several tabs p5113/ (2) p5110 and have been here for a while. check into that buddy
edit: yeah I just did a search and came up with nothing on that rom for a p5113
I had a similar issue with Omni last night on a dirty flash over CM11 (being Lazy). Try plugging in the charger and holding the power button for 10sec. The tab should turn off and the charging icon should pop up. Then unplug and tab should be off (I know inconvenient). I would wipe and do a fresh install. Sometimes to power off it takes a few times till the rom settles in on the device.
I am new do this so not too sure but it helped me. Good Luck!
Try hard restart with charger plugged in then remove the charger when u see charging icon on your tab and try to clean install the ROM again... It works on my P-5100 every time.. Btw I have been using Pyrana ROM never experienced such a problem though..
my sony xperia l is having display problems.i have rooted my phone and unlocked bootloader.Then i had flashed kernel thunderzap 3.0.
now when i turn on my phone and turn off display using power key, it's turned off ,but it does not turn back on when i press the power key again, but the phone is still on.What should i do?....
PLEASE DO HELP ME.....thanks in advance
jacobthomas said:
my sony xperia l is having display problems.i have rooted my phone and unlocked bootloader.Then i had flashed kernel thunderzap 3.0.
now when i turn on my phone and turn off display using power key, it's turned off ,but it does not turn back on when i press the power key again, but the phone is still on.What should i do?....
PLEASE DO HELP ME.....thanks in advance
Click to expand...
Click to collapse
Sounds like you've flash wrong kernel..try another kernel that matched your fw
faizalotai said:
Sounds like you've flash wrong kernel..try another kernel that matched your fw
Click to expand...
Click to collapse
i tried to flash thunderzap 4.6 latest but it got stuck at boot animation,then i had to flash thunderzap 3.0 again....
it is just that once the screen is off it does turn back on,the same case when i made a call,....pls help.....
jacobthomas said:
i tried to flash thunderzap 4.6 latest but it got stuck at boot animation,then i had to flash thunderzap 3.0 again....
it is just that once the screen is off it does turn back on,the same case when i made a call,....pls help.....
Click to expand...
Click to collapse
I think that you are still on JB. Latest Thunderzap for Jelly Bean is 4.1 - r2. Thunderzap 4.6 is for Kit Kat that's why you got bootloop before bootanimation. Try 4.1 - r2 and you will see TZ 3.0 is quite old it might have some bugs.