Hi,
I rooted with towel root tried to take off now stuck in odin mode. odin fails everytime no matter what. forgot to enable usb debugging and now stuck and cant flash a rom HELP
Odin Mode
Product name :SCH-I535
Current binary: samsung official
System Status: Official
Qualcomm secureboot: Enable
bootloader ap swrev: 2
SW REV CHECK FAIL : FUSED 2 > BINARY 1
BadRooter said:
Hi,
I rooted with towel root tried to take off now stuck in odin mode. odin fails everytime no matter what. forgot to enable usb debugging and now stuck and cant flash a rom HELP
Odin Mode
Product name :SCH-I535
Current binary: samsung official
System Status: Official
Qualcomm secureboot: Enable
bootloader ap swrev: 2
SW REV CHECK FAIL : FUSED 2 > BINARY 1
Click to expand...
Click to collapse
Have you tried taking the battery out for a minute, put it back in the phone and then turn it back on? That worked for me.
Sent from my SM-T330NU using Tapatalk
cindylike24 said:
Have you tried taking the battery out for a minute, put it back in the phone and then turn it back on? That worked for me.
Sent from my SM-T330NU using Tapatalk
Click to expand...
Click to collapse
I've pulled the battery 100 times
BadRooter said:
I've pulled the battery 100 times
Click to expand...
Click to collapse
What version were you on before you attempted to go into Odin?
From my Wicked S3 running MIUI
Related
I tried flashing a rom on odin and it failed so i tried flashing it 3 more times and got the same results i've tried pulling out the battery going into download mode and still nothing it just takes me back to the screen that says this
ODIN MODE
Product Name: SCH-R530M
CUSTOM BINARY DOWNLOAD: Yes (4 counts)
CURRENT BINARY: custom
SYSTEM STATUS: CUSTOM
QUALCOM SECUREBOOT: ENABLED
SOMEONE HELP PLEASE :crying::crying::crying::crying:
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
m_alswairki said:
Hello, long story short.
I wanted to install TWRP on my J710FN and when I did so it wouldn't boot got stuck on the logo.
So, I tried to flash the stock firmware but the thing is my phone has a U6 binary.
I can't unbrick it using odin to flash the stock firmware because I cant find any U6 firmwares for my device.
I tried to flash these:
J701FXXU6BRH9
J710FNDDU1BRB2
J710FXXU5CRJ7
J710FNXXU5BRD5
J710FXXU4BRA2
And none of them worked.
I even tried with Samsung smart switch but when I enter the S/N it says its not correct.
Please any help?
Click to expand...
Click to collapse
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
m_alswairki said:
Also, I cant get in the recovery mode.
and in the download mode it says:
Product Name: SM-J710F
Current Binary: Custom
System Status: Official
FRP Lock: Off
Secure Download: Enable
RP WEREV: B:6 K:1 S:2
Click to expand...
Click to collapse
Same problem around me! - Finally any good new news for that?
J710FXXU6CSE1
I use this, yesterday this one repair my bootloop (black screen after logo), naw i cant find any possible to root my phone.
When u get binary 6 most important in wersion is J710FXXU---6---CSE1 (marked 6), this seys how meny binary it's. U need same number binnary or more binnary to flash phones corrects.
PS. - my model phone was change from SM-J710F to SM-J710FN but till naw all works fine.
If anyone get binnary 6 and got worked root files plis share.
Hello, i've got SM-G930F with bootloop the phone was random rebooting once for a day and suddenty went bootloop.
Tried flashing original rom with Success in odin also TWRP with Fail. Cannot access recovery mode. up+power+home
Download Mode Info:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: On
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:6 K:4 S:5
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Kisu1337 said:
Hello, i've got SM-G930F with bootloop the phone was random rebooting once for a day and suddenty went bootloop.
Tried flashing original rom with Success in odin also TWRP with Fail. Cannot access recovery mode. up+power+home
Download Mode Info:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: On
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:6 K:4 S:5
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Click to expand...
Click to collapse
hey try flashing the phone with a stck firmware and check the nand erase on odin
Kisu1337 said:
Firmware version i flashed:
G930FXXS6ESI4_G930FXEO6ESI4_XEO
Any idea how to fix bootloop ?
-update1-
While in download mode, and hit Start in Odin. Download screen just goes black and Odin is flashing* everyghin with Success at the end.
Tried with SamFirm downloaded latest XEO POLAND Firmware and flashed everything with Success, still bootloop and still in Download mode Current Status is Custom no idea why.
Click to expand...
Click to collapse
did you factory reset after flashing it? if not, boot into stock recovery and factory reset it.
also, the screen should NOT go black when flashing in Odin. That is peculiar and also might be part of your problem
So I have an old SM-G920W8 that was with Rogers, but when I turned it on it would get stuck on the galaxy s6 screen. So I tried entering the recovery thing or whatever it was called but there was text at the top left that said "recovery is not seandroid enforcing", so then I tried to flash the stock firmware back on with Odin 3.10.6 with the ROM I got from Frija, but it fails every time.
ToadNugget said:
So I have an old SM-G920W8 that was with Rogers, but when I turned it on it would get stuck on the galaxy s6 screen. So I tried entering the recovery thing or whatever it was called but there was text at the top left that said "recovery is not seandroid enforcing", so then I tried to flash the stock firmware back on with Odin 3.10.6 with the ROM I got from Frija, but it fails every time.
Click to expand...
Click to collapse
Hmm ... Should work.
Have you downloaded the correct firmware?
Best to check the installation guide again and repeat it:
Samsung Galaxy S6 SM-G920W8 Stock Firmware (ROM Flash File) [DOWNLOAD]
Download the official Samsung Galaxy S6 SM-G920W8 Stock Firmware ROM (Flash File) for your Samsung Smartphone and unbrick the device, fix boot loop and more.
firmwarepanda.com
Keep in mind that flashing a different CSC with Odin needs doing a factory reset with doing data.
That is why I always prefer using "Home_CSC" to keep my CSC and data.
It_ler said:
Hmm ... Should work.
Have you downloaded the correct firmware?
Best to check the installation guide again and repeat it:
Samsung Galaxy S6 SM-G920W8 Stock Firmware (ROM Flash File) [DOWNLOAD]
Download the official Samsung Galaxy S6 SM-G920W8 Stock Firmware ROM (Flash File) for your Samsung Smartphone and unbrick the device, fix boot loop and more.
firmwarepanda.com
Keep in mind that flashing a different CSC with Odin needs doing a factory reset with doing data.
That is why I always prefer using "Home_CSC" to keep my CSC and data.
Click to expand...
Click to collapse
OK I tried that, but then it said "SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3" and now the screen wont turn on
ToadNugget said:
OK I tried that, but then it said "SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3" and now the screen wont turn on
Click to expand...
Click to collapse
Check this thread:
Sw rev. Check fail. Device: 5, binary 3
Hi, I've got a Galaxy S6 G920F on Vodafone that I am trying to downgrade from 7.0 to 6 or 5 so that I can go through with an unlocking procedure but I keep getting the error message " SW REV. CHECK FAIL. DEVICE: 5, BINARY 3". Can anyone help?
forum.xda-developers.com
Seems that you have to flash another firmware version.
Hi Guys,
Device: Samsung Galaxy Note N7000
Power On: Stuck with popup "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Stock ROM: can't locate firmware for those BL, AP, CP, CSC files
Anyone can help? Appreciated.
Cheers
hi im trying to flash stock rom on my s7 sm-g930f because i have bricked it. when i try to flash the stock rom with odin i get a fail everytime
in the download mode it says
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAB LOCK: OFF
SECURE DOWNLOAD : ENABLED
WARRENTY WOID: 1 (0X030C)
AP SWAEV B:8 K:6 S:7 (I THINK ITS HARD TO SEE)
AND WHEN ODIN FAILS THIS POPS UP (SW REV CHECK FAIL(BOOTLOADER) DEVICE 8, BINARY: 3)
I Dont know what is wrong can some one pls help me
Did you run odin with admin rights?