Hi, i have an Asus tf300t (with 4.2.1). when i boot in recovery ( volume down + power) and press the RCK button, i stuck with error (red triangle). Pressing the power button the asus starting again normally. My question : how can i solve this problem and load custom rom?
costaslalas said:
Hi, i have an Asus tf300t (with 4.2.1). when i boot in recovery ( volume down + power) and press the RCK button, i stuck with error (red triangle). Pressing the power button the asus starting again normally. My question : how can i solve this problem and load custom rom?
Click to expand...
Click to collapse
Have you flashed a recovery, such as TWRP yet? That usually occurs when there is no custom recovery installed. You need to flash a recovery in order to use the recovery
Related
hi,
I Have a tf101 and I can't get into recovery if I try transformer to recovery from the Marked it just restarts normal.
If I try volume down + power and press vol up it gets stuck on the message booting recovery kernel image.
It is Rooted and I wanted to update rom.
Any Ideas?
solved
http://forum.xda-developers.com/showthread.php?t=1174502
My asus tf300t with Stock 4.2.1 Rom + twrp 2.6.1.0 + cyanogenmod.10.0.0 stable won't boot.
Because the backup of Stock 4.2.1. Rom failed because a file had a 0 filesize, I do not have a backup of mu stock Rom.
Whats is the best and savest way to repair?
cx1964 said:
My asus tf300t with Stock 4.2.1 Rom + twrp 2.6.1.0 + cyanogenmod.10.0.0 stable won't boot.
Because the backup of Stock 4.2.1. Rom failed because a file had a 0 filesize, I do not have a backup of mu stock Rom.
Whats is the best and savest way to repair?
Click to expand...
Click to collapse
Afterall I solved this problem myself.
I used the following procedure:
01. Download cyanogenmod 10.2 nightly 05-10-2013 cm-10.2-20131005-NIGHTLY-tf300t.zip
02. copy cm-10.2-20131005-NIGHTLY-tf300t.zip on a microSD card
03. shutdwon tf300t
04. Power it on by pressing and holding VOLUME DOWN and POWER buttons simultaneously
05. When you see white text in the top left corner of the screen, release the buttons ^^ and press VOLUME UP button,
you are now in recovery mode en can use twrp
06. install cm-10.2-20131005-NIGHTLY-tf300t.zip from microSD with twrp install button
07. After this tf300t hangs in a new bootloop after reboot of tf300t (this a bootloop of cyanogenmod. you see only cyanogenmod logo)
08. Power it on by pressing and holding VOLUME DOWN and POWER buttons simultaneously
09. When you see white text in the top left corner of the screen, release the buttons ^^
select the wipe data option (most right option, from a menu with 3 icons. RCK, Android and wipe data)
10. Power it on by pressing and holding VOLUME DOWN and POWER buttons simultaneously
11. When you see white text in the top left corner of the screen, release the buttons ^^ and press VOLUME UP button,
you are now in recovery mode en can use twrp
12. use the wipe function to wipe data
13. Reboot tf300t
14. if everything is done correctly, tf300t will start normally.
This procedure helped my under above written condition. Follow this procedure on your own risk!!!
Hello,
I have successfully flashed CWM recovery image in my ZLR F9006 phone using mediatek tools.
When i am using ROM Manager i can successfully reboot in CWM recovery.
When i boot into recovery using the buttons combination(Volume+ and boot) my phone
boots in stock chinese recovery mode.
Is there any solution?
perimano said:
Hello,
I have successfully flashed CWM recovery image in my ZLR F9006 phone using mediatek tools.
When i am using ROM Manager i can successfully reboot in CWM recovery.
When i boot into recovery using the buttons combination(Volume+ and boot) my phone
boots in stock chinese recovery mode.
Is there any solution?
Click to expand...
Click to collapse
LOL found your post just coz i wanna get 1 of them
there might be more than one recovery partition i guess so command in bootloader says to flash secure recovery when key combo pressed
does cwm stay if you boot using key combo or you have to flash again ?
i'm guessing
1 boot into cwm
2 do a full backup
3 reboot phone check in file manager backup is on external sd !!! IMPORTANT !!!
4 power off the phone
5 try other key combinations ie :
Code:
VOL- and POWER
VOL+ and VOL- and POWER
VOL+ and HOME and POWER
VOL- and HOME and POWER
HOME and POWER
you get the drift
THIS WILL 99.9% FACTORY RESET YOUR PHONE (UNLESS YOU AVOID HARD RESET COMBO)
GOODLUCK
BTW HOW IS THIS PHONE IN HAND ?>
I have a zlr f9006 and I also flashed CWM. I also can't access it via key combination but CWM Rom Manager application gives you the option to "Reboot into Recovery" which actually works!
solution
How to boot this recovery:
- Power off
- Hold VOL+ and Power (will take longer time than VOL- and Power)
- Menu shows giving you choice between ROM downloader, UART, Recovery and Normal
- Use VOL keys to choose Recovery
- CWM boots
Hi Guys,
I have flashed 5.0.2 Asia Retail ROM. Now when i try to reboot to recovery, i am getting a blank screen.
I even flashed twrp again using fastboot. ( yes,i am able to go to Fastboot mode). Even if i tried to go to recovery from Fastboot, I am getting the same error.
Can somebody point out what i am doing wrong.
Cheers.
Are you rebooting from the ROM power menu?
Or by pressing volume down/power button for 5 seconds, then scroll down by using volume down and confirm by pressing volume up?
Hey guys, just flashed a custom recocery to my P8 Lite device,
http://forum.xda-developers.com/p8lite/development/testing-twrp-2-8-7-x-huawei-p8lite-qcom-t3187758
I have flashed this file using ADB fastboot - fastboot flash recovery folder/image.img
all went well, rebooted and booting into the custom recovery all fine, but when rebooting, and trying to enter recovery again using the POWER BUTTON + VOL UP buttons, it loads the stock recovery. It seems the only way I can get into the custom recovery again is using
adb reboot recovery
Is this normal? Is there a way I can ALWAYS enter the custom recovery using the phone buttons and without the need for a PC?
Thanks
Ok so weird I figured it out, everywhere it says press the POWER + VOL up keys to enter recovery. But for me (and I dont know why) its press the POWER and hold down VOL UP + VOL DOWN keys. Gets me into the KIRIN custom TWRP recovery
I do however have another question, Do I need to flash specific custom recovery images for the phone? Or can I flash any custom TWRP recovery images?
Thanks!