Related
Dear All,
I recently got this device in Hong Kong and is hapi with its performance!
But I am still wondering if this device could actually use the LTE available in HK?
I knw the msm8960 claimed to be capable of utilizing all frequency of radio,
so is it possible that there is some soft lock in the baseband?
Could i flash the baseband or replace the modem driver from other device to access other frequency?
any idea is appreciated!
Thanks!
Vasco
I think it has to modifiy the ROm and the hardware
I tried to figure out, if our Photon Q is supporting more LTE bands than 1900 MHz (#2 or/and #25).
-> http://en.wikipedia.org/wiki/E-UTRA#Frequency_bands_and_channel_bandwidths
On some sites there are reports for having another band. (Have to search again, I think it was 850 MHz, #26 or 700 MHz, #12/#17/#29.)
I have also searched for supported frequencies for MSM8960.
I found some BlackBerry devices based on that SoC and 2 different versions of supported LTE bands.
One version (UK) supported 4 in europe used bands und the other version (US) supported 4 in US/Canada used bands.
I think that the Photon Q is like the BlackBerry US version and supports 4 LTE bands in US/Canada.
If you need a few sites, I will search again and show it to you.
The strange thing is, if I set to LTE only (via 4636) I can see all 4 carrier (germany).
We have 3 bands with LTE on it, but I can only get signal to max 2 of them.
Band 3, 7 and 20 (1800, 2600, 800 MHz).
The weird thing is, that on band #20 (800 MHz) only 3 carrier are active, so it has to be band #3 or #7.
Maybe I'm missinterpreting things and thats just a sideeffect of crossing bands of LTE US and UMTS Germany.
On stock ROM there was another "secret phone code" to see what the phone-part is doing. (From qualcomm I believe.)
I think I will test it some other day, to see which band is active.
At last, I was never been able to "login" or "register" into my carriers network within LTE.
Please discuss about that possibility, I really want to find out, which frequencies are supported by our phone on LTE.
Loader009 said:
I tried to figure out, if our Photon Q is supporting more LTE bands than 1900 MHz (#2 or/and #25).
-> http://en.wikipedia.org/wiki/E-UTRA#Frequency_bands_and_channel_bandwidths
On some sites there are reports for having another band. (Have to search again, I think it was 850 MHz, #26 or 700 MHz, #12/#17/#29.)
I have also searched for supported frequencies for MSM8960.
I found some BlackBerry devices based on that SoC and 2 different versions of supported LTE bands.
One version (UK) supported 4 in europe used bands und the other version (US) supported 4 in US/Canada used bands.
I think that the Photon Q is like the BlackBerry US version and supports 4 LTE bands in US/Canada.
If you need a few sites, I will search again and show it to you.
The strange thing is, if I set to LTE only (via 4636) I can see all 4 carrier (germany).
We have 3 bands with LTE on it, but I can only get signal to max 2 of them.
Band 3, 7 and 20 (1800, 2600, 800 MHz).
The weird thing is, that on band #20 (800 MHz) only 3 carrier are active, so it has to be band #3 or #7.
Maybe I'm missinterpreting things and thats just a sideeffect of crossing bands of LTE US and UMTS Germany.
On stock ROM there was another "secret phone code" to see what the phone-part is doing. (From qualcomm I believe.)
I think I will test it some other day, to see which band is active.
At last, I was never been able to "login" or "register" into my carriers network within LTE.
Please discuss about that possibility, I really want to find out, which frequencies are supported by our phone on LTE.
Click to expand...
Click to collapse
Dear Loader009,
Thanks for your information! I'm really impressed that you could actually search the carrier in 'LTE only from Germany!
Could you please share the version of ROM you are using?
And if possible, any screenshot? I really want it can be used in HK with LTE(1800, 2100 & 2600Mhz)
Also do you have more information about the secret phone code? I think it would be interesting
Actually, I noted that xt925 and xt905 are using the same chip MSM8960 with LTE usable in HK.
Is there anyone can locate the radio/baseband of their rom and port it for XT897?
I am willing to try it with my machine.
If this work, I think we could use this photon q all over the world!
Any idea?
Regards,
Vasco
disablewong said:
Dear Loader009,
Thanks for your information! I'm really impressed that you could actually search the carrier in 'LTE only from Germany!
Could you please share the version of ROM you are using?
And if possible, any screenshot? I really want it can be used in HK with LTE(1800, 2100 & 2600Mhz)
Also do you have more information about the secret phone code? I think it would be interesting
Actually, I noted that xt925 and xt905 are using the same chip MSM8960 with LTE usable in HK.
Is there anyone can locate the radio/baseband of their rom and port it for XT897?
I am willing to try it with my machine.
If this work, I think we could use this photon q all over the world!
Any idea?
Regards,
Vasco
Click to expand...
Click to collapse
Of course, I was just blind guessing the hardware for xt926 and xt907 are using the same hardware.
If not, there should be one chip controlling the modem channel of the device to be replaced.
But WHICH ONE???
Any expert in this area can solve this question? I am a dummy for radio stuffs
This seems like it's getting pretty interesting.
Sent from my XT897 using Tapatalk 2
Dear all,
I'm also very interested in this topic since I imported a Photon Q to Germany and was wondering if it's possible to use the local LTE 800/1800/2600 bands.
I think the first thing we have to find out is whether the hardware is capable of using other bands than the 1900 band listed on the Motorola website. As Loader009 states he could see LTE carriers which are known to use different bands I assume the hardware can do it. Otherwise the carriers wouldn't have been listed, right? Maybe someone from another country with different frequency bands can check and confirm that he can see those carriers as well?
Thus, the limitation to the 1900 band should be software-made and could be modified by a developer. I hope someone can participate at that point as I don't know much about coding...
I'm using CM10.1.
I can't remember the secret phone code, I have to do research again.
This secret phone code only works on Stock ROM. (I stupidly deleted it, when it wasn't working on CM10 anymore.)
The one secret phone code I used to force "LTE only" was *#*#4636#*#*.
Please DON'T change the baseband (don't even tap on it).
This can do problems to you. (I had to use QPST to recover the supported frequencies.)
Also, developers (afaik) can't modify the modem firmware.
We also don't even know, which LTE bands the Photon Q is capable of. (Except 1900 MHz)
I've got my 32GB SDCard back and will test it in the next few days out.
I hope I'll find that secret phone code, I'll also make a few screenshots.
Got the code!
##33284# <- ##DEBUG#
It only works on stock afair!
I'll test tomorrow, it's about 3am now >.<
disablewong said:
Dear All,
I recently got this device in Hong Kong and is hapi with its performance!
But I am still wondering if this device could actually use the LTE available in HK?
I knw the msm8960 claimed to be capable of utilizing all frequency of radio,
so is it possible that there is some soft lock in the baseband?
Could i flash the baseband or replace the modem driver from other device to access other frequency?
any idea is appreciated!
Thanks!
Vasco
Click to expand...
Click to collapse
I have read the "QU_SnapdragonS4_White_Paper_FNL_Rev6.pdf" and found there following entry:
-----------------------------------------------------------
• Industry’s first fully integrated 3G/4G world/multimode LTE Modem: <<<Supports all of the world’s leading 2G, 3G and 4G LTE standards>>>.
It also includes integrated support for multiple satellite position networks (GPS and GLONASS) as well as short range radios via Bluetooth,
WiFi, FM and NFC.
• Designed for speed, compatibility and power savings:
Snapdragon S4 Processor MSM8960 chipset includes the industry’s only complete platform that integrates all of the world’s leading 2G, 3G and 4G mobile broadband modem technologies on a single chip. This new integrated multimode modem is based on an advanced, programmable architecture that is performance, size and power optimized for the fastest combination of modems available for:
- LTE FDD/TDD (Cat3)
- 3G (DC-HSPA+ Cat 24)
- EV-DO Rev. B
- 1x Advanced
- TD-SCDMA
- GSM/GPRS/EDGE NFC.
Multimode/Multiband Means Worldwide Coverage.
• Support for multiple radio frequencies: Mobile broadband technologies are growing increasingly complex in their implementation. LTE is currently being implemented in over 40 diff erent radio frequency bands throughout the world. To complement its wide range of modem standards supported, Qualcomm has designed the Snapdragon S4 Processor MSM8960 CHIPSET platform to <<< address all commonly-used frequencies (from 700–2600 MHz) and bandwidths up to 20 MHz>>>, allowing its customers to address any mobile network opportunity whether the simplest single frequency implementation to the most extensive multi-frequency global mode, whether 4G, 3G or 2G.
-----------------------------------------------------------
Based on the document the chip can handle all LTE Standards, but it depends on his "advanced, programmable architecture"....as written there and how Motorola / Sprint implemented this, maybe they reduced LTE only to one Standard.
I don't have LTE in my area and so I cannot test this.
That's possibly right.
Something else:
If I remember correctly, somewhere in this forum have been said that for CDMA the internal Sprint "ID"(?) is used.
Maybe that's also the reason why I cannot connect to LTE in my area.
The phone is trying to "login" with the Sprint ID and this of course won't work.
The ##DEBUG# menu wasn't helpfull. It shows frequencies for american standards and not for GSM/WCDMA.
Also the LTE menu is also not very helpfull, it doesn't show frequencies at all.
Any News on this topic?
Maybe one of the developers can give a statement?
Yesterday I tested a LTE compatible SIM card.
My Bro has a Samsung Galaxy S4 with 4G/LTE in my area.
So I've put his SIM-Card into my Photon Q and set LTE only.
I had no luck, the Phone couldn't register into the network for this SIM.
I guess either it has the wrong frequencies or LTE is for inbuilt "SIM" (Sprint SIM?) only.
The latter. LTE is configured only for 1900 MHz which Sprint uses.
LTE is configured only for Sprint's frequencies, however, it supports the United States frequencies of PCS blocks A-G. The G Block is Sprint's current LTE channel, and they may deploy it later on Blocks A through F, depending on if they own the spectrum in a given market. The reason you see EU networks when the phone is in LTE Only Mode is most likely because the Phone still sees GSM signals, but will only connect to LTE ones from those GSM signals. Likewise, in the US, if you force LTE Only and then search for networks, AT&T and T-Mobile US will come up as the GSM carriers the Photon Q sees, rather than the LTE signals it sees.
Setting the Photon to LTE Only will not do anything for LTE in the EU. I suspect that if another carrier in the EU uses the 1900 MHz for LTE, the Photon Q will have no issues connecting to LTE in Europe. But until that time, be happy with HSPA.
Skrilax_CZ said:
LTE is configured only for 1900 MHz which Sprint uses.
Click to expand...
Click to collapse
Can this configuration theoretically be changed / other frequencies be added?
Only if you break BP security.
Skrilax_CZ said:
Only if you break BP security.
Click to expand...
Click to collapse
Sorry, what's that?
IIRC The only place with 850mhz LTE available is the Chicago market and currently no phones at all support it. :crying:
Not only does your phone need to support it, your PRL and cell-site does too...
Im wondering if anyone has gone from the Desire Z to the Galaxy S Relay 4G in Europe.
I ask for Europe to make sure it is compatible with most networks over here.
I see there is even ROM development over here with 4.4.4 running I imagine codename "Android L" will probably run as well
Thank you for the comments.
A few have had posts in the q&a or maybe general section, there aren't many posts at all here so I'm sure with minimal effort you'll find the ones I'm referring to
Sent from my Nexus 4 using XDA Premium 4 mobile app
riahc3 said:
Im wondering if anyone has gone from the Desire Z to the Galaxy S Relay 4G in Europe.
I ask for Europe to make sure it is compatible with most networks over here.
Thank you for the comments.
Click to expand...
Click to collapse
I went from Desire Z to Galaxy S Relay, it works well in Norway.
You need to unlock the phone from T-Mobile, see this thread http://forum.xda-developers.com/showthread.php?t=2255892.
Be aware that this phone is not enabled for 4G (LTE) network, only 3.75G (HSPA+). HSPA+ is marketed as 4G in USA, not in Europe.
raphaelcno said:
I went from Desire Z to Galaxy S Relay, it works well in Norway.
You need to unlock the phone from T-Mobile, see this thread http://forum.xda-developers.com/showthread.php?t=2255892.
Be aware that this phone is not enabled for 4G (LTE) network, only 3.75G (HSPA+). HSPA+ is marketed as 4G in USA, not in Europe.
Click to expand...
Click to collapse
3G works in Norway too?
I think by frequencies sadly 3G wont work here where Im at A shame.
900 MHz 3g doesn't work!
I upgraded too from Desire Z to Relay, didn't even realize any 900 Mhz problem. I get always an H or E icon (HSDPA or EDGE), so 900 MHz should be working.
According to specs, the phone should work with these networks:
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 1700 / 1900 / 2100
I have it in Telekom in Slovakia and in the meantime I travelled to NY and got no problem at all (I had it set to manual network selection to save roaming charges).
The phone I bought via ebay was locked (even the seller described it as unlocked) but after firmware downgrade I easily unlocked it. I recommend LiquidSmooth ROM, you'll fall in love with that phone!
My other finalist was Moto Photon Q, it supports GSM but lacks SIM card slot. If you want, there's a guy in Prague, the author of the sim card mod instruction post on xda, that can do it for you. But I chose the easier way. Now I have a small problem with display flex cable (probably too much openings/day) so I'm considering buying another Relay before they're gone with no decent qwerty phone around. And I can leave the current one for spare parts. I had to put away my DZ because of the keyboard. Some keys started to write several characters instead of one and there was no easy way to fix it.
FYI ebay deals in your name with customs, so they charge you immediately and the phone is delivered to your door without customs holding it for a week.
If you wish to
T699 in the UK
Hi.
I did not owed the HTC, I used an Xpreia Pro prior to my S4 Relay. However I have the S4 relay for almost 1 year and I had no problems using it in the UK. I have traveled in Europe (France, Germany, Austria, Hungary, Romania) and I was able to use it without any problems. AFAIK it works just fine on 900 Mhz but in 2G. The big question is what freq of 3G is your network provider using. For example, in UK I'm on EE network which is using 2100 Mhz for 3G and 1800 Mhz for 2G so the device works perfectly. Ifyou are on Movistar Spain than your phone will work fine, since the company is offering 2G on: 900/1800 MHz (both supported by S4 relay) and 900/2100 MHz UMTS ( from which 2100 is supported by the device). In very simple translation 2g will work everywhere without any problem, it might happen that is some places you will not get 3G signal.
Hope it helps.
Emil
hi just purchased a USA htc win phone ,does anyone know if 4g will work in UK ,if so witch provider cheers
no body tried then
not much happening here then
Not sure
I have just bought from USA a HTC One M8 T-Mobile 0P6B140 which I have unlocked. It is working fine but although it shows it is on Vodafone UK 4G, using the app NET CHECK it reports 3G HSDPA/HSUPA 57mbit. The only thing that I haven't got working is MMS. I have entered the APN details for my contract Vodafone sim which I found on the net, and there are various, but it tells me it cannot send and to contact mobile op. for settings.
As for the 4G, I live in a rural area it may be that Vodafone are transmitting on band 20 (800 MHz) and this phone doesn't support that. Vodafone only have the 800 and 2600 frequencies, band 7 and 20. My phone uses 3 (1800), 4 (AWS). 7(2600), 13 (not sure). I might be wrong with these.
Overall I am pleased, the phone is superbly built and it gives me something to think about!
I have the mms working fine, it was just the APN/MMS settings. So it is just the 4G not working but I can stream video from my synology ds214play with the 3g HSDPA/HSUPA.
Hi, LTE support depends on which carrier version you are bringing to Europe. My Verizon version did not work because it supports only "non-European" LTE Bands.
Now that I am using the AT&T version I can use full LTE in Europe (except the 800mhz band, which doesn´t matter for my country).
Be also aware that AT&T and obviously T-Mobile change the firmware so the phone will display 4G when in reality it is on 3.5/3.75G and LTE when it is on real 4G.
Cheers,
T.
Hi,
I brought a Moto G from India, before coming the US for doing my masters.
The thing is here it does not pick up 3G or 4G bands. It just works on EDGE.
I wanted to ask if i can use the QPST method to unlock the bands? because I can see no information on it in the forums(for this phone). I am especially confused since it says nothing about dual sim phones and this is the dual sim variant of moto G
It would be great if someone would guide me how i could unlock the bands on my phone.
Regards,
Naved.
I'm almost a 100% sure this wont work but try installing a USA stock rom and a USA stock kernel. But I think the problem is with Sim card though.
Thanks for the help man. I am currently on T-Mobile planning to switch to at and t soon. You think that it'll at least pick up 3g after that?
Sent from my MotoG3 using XDA Free mobile app
Dear Akonsand, finally do you know if I can use the QPST method to unlock the bands of the Moto G3 (XT1541)?
I have the same problem that you...
I'm bumping this just in case there are some news on the subject.
I'm stuck on EDGE with an XT1541 in Argentina and i'm not really sure of what to do... Is there some sub-forum with phone exchanges around the world?
Maybe someone's interested on a trade!
There were some successful attempts at unlocking the bands on the Moto E 2015, but for now there's no hope for the G...
How do you guys see it? Do we have any chance? Should we wait?
Thanks everybody!
Very interested as I have a xt1550 but am on o2 UK and would like to enable lte for this carrier
akonsand said:
Hi,
I brought a Moto G from India, before coming the US for doing my masters.
The thing is here it does not pick up 3G or 4G bands. It just works on EDGE.
I wanted to ask if i can use the QPST method to unlock the bands? because I can see no information on it in the forums(for this phone). I am especially confused since it says nothing about dual sim phones and this is the dual sim variant of moto G
It would be great if someone would guide me how i could unlock the bands on my phone.
Regards,
Naved.
Click to expand...
Click to collapse
I am a little confused here... Your Indian model phone should get 3G in the US, but not LTE (I hate it when people say "4G", technically speaking even LTE isn't 4G but that is for another thread), in fact, assuming you have the correct SIM and APN settings, your model should get HSPA+ speeds. LTE is out though... let me explain
3G (HSPA/HSPA+) in the US is 850Mhz and 1900Mhz, in India it is 800Mhz and 1800Mhz, the Moto G supports all 4 of these bands, so it should work in the US just fine.
In the US, several bands are used for LTE such as 2, 4, 5, 12, 13, 17, 25, 26, and 41 (granted some bands are very limited or carrier specific), but in India LTE use is exclusively Band 40 by both Aircel and Airtel, and the LTE setup in the Moto G is specific for those countries and does not inter-operate.
So, long story short, with a GSM US carrier SIM and correct APN setup, you should get 3G HSPA+ data connections with no issues on your Indian Moto G, which is probably good enough for most uses and can exceed 8mbps down speeds in many areas.
acejavelin said:
I am a little confused here... Your Indian model phone should get 3G in the US, but not LTE (I hate it when people say "4G", technically speaking even LTE isn't 4G but that is for another thread), in fact, assuming you have the correct SIM and APN settings, your model should get HSPA+ speeds. LTE is out though... let me explain
3G (HSPA/HSPA+) in the US is 850Mhz and 1900Mhz, in India it is 800Mhz and 1800Mhz, the Moto G supports all 4 of these bands, so it should work in the US just fine.
In the US, several bands are used for LTE such as 2, 4, 5, 12, 13, 17, 25, 26, and 41 (granted some bands are very limited or carrier specific), but in India LTE use is exclusively Band 40 by both Aircel and Airtel, and the LTE setup in the Moto G is specific for those countries and does not inter-operate.
So, long story short, with a GSM US carrier SIM and correct APN setup, you should get 3G HSPA+ data connections with no issues on your Indian Moto G, which is probably good enough for most uses and can exceed 8mbps down speeds in many areas.
Click to expand...
Click to collapse
Hey thanks for the reply man.
I think even HSPA or HSPA+ might not work for me on this phone. I am using a T Mobile family plan here, and comparing th bands given on the website:
"4G (HSPA+)
With 4G, theoretical maximum download speeds range from 21 Mbps up to 42 Mbps. You can take advantage of incredibly fast download speeds, and even use voice and data services at the same time.
Frequencies: Band 2 (1900 MHz), Band 4 (1700/2100 MHz)
3G (HSPA)
With 3G, theoretical maximum download of 14 Mbps. With 3G, you can use voice and data services simultaneously.
Frequencies: Band 4 (1700/2100 MHz)"
and the bands my phone supports(from the motorola website)
"Moto G (XT1550)
LTE (1, 3, 7, 8, 28,40) UMTS/HSPA+ (900, 2100, 850 MHz)
GSM/GPRS/EDGE (850, 900, 1800, 1900 MHz)"
It seems that the uplink is unsupported by my phone and so the phone is unable to use the HSPA/HSPA+ bands. I think the only way to use it is to unlock the 1700 MHz band on my phone.
(BTW Tmobile quotes HSPA+ as 4G and thats hilarious lol)
akonsand said:
Hey thanks for the reply man.
I think even HSPA or HSPA+ might not work for me on this phone. I am using a T Mobile family plan here, and comparing th bands given on the website:
"4G (HSPA+)
With 4G, theoretical maximum download speeds range from 21 Mbps up to 42 Mbps. You can take advantage of incredibly fast download speeds, and even use voice and data services at the same time.
Frequencies: Band 2 (1900 MHz), Band 4 (1700/2100 MHz)
3G (HSPA)
With 3G, theoretical maximum download of 14 Mbps. With 3G, you can use voice and data services simultaneously.
Frequencies: Band 4 (1700/2100 MHz)"
and the bands my phone supports(from the motorola website)
"Moto G (XT1550)
LTE (1, 3, 7, 8, 28,40) UMTS/HSPA+ (900, 2100, 850 MHz)
GSM/GPRS/EDGE (850, 900, 1800, 1900 MHz)"
It seems that the uplink is unsupported by my phone and so the phone is unable to use the HSPA/HSPA+ bands. I think the only way to use it is to unlock the 1700 MHz band on my phone.
(BTW Tmobile quotes HSPA+ as 4G and thats hilarious lol)
Click to expand...
Click to collapse
Most us carriers say HSPA+ is 4G...
Tmobile is great in many regards, except if you have an international phone like the Moto G and they do not have the correct bands implemented in your area, which it appears they do not... Honestly, consider moving to AT&T Wireless or an AT&T based MVNO like Cricket, Straight Talk AT&T, or Go Phone, it might cost a little more but you could get HSPA+ with no issues. 850Mhz is AT&T's primary HSPA/HSPA+ frequency, and 1900Mhz is added to congested areas, but this varies by area... before going all in I suggest trying a SIM from a buddy or go the AT&T (corporate) store and ask to test a SIM just to be sure. But regardless you should get UMTS/GSM speeds on AT&T, which is way better than Edge, averaging anywhere from 500kbps-2mbps.
If TMo is essential or you can't change for whatever reason or live without HSPA+/LTE, consider getting a Blu phone or Moto E locally, they are relatively inexpensive (under $150) and are not amazing but will probably do the job.
acejavelin said:
Most us carriers say HSPA+ is 4G...
Tmobile is great in many regards, except if you have an international phone like the Moto G and they do not have the correct bands implemented in your area, which it appears they do not... Honestly, consider moving to AT&T Wireless or an AT&T based MVNO like Cricket, Straight Talk AT&T, or Go Phone, it might cost a little more but you could get HSPA+ with no issues. 850Mhz is AT&T's primary HSPA/HSPA+ frequency, and 1900Mhz is added to congested areas, but this varies by area... before going all in I suggest trying a SIM from a buddy or go the AT&T (corporate) store and ask to test a SIM just to be sure. But regardless you should get UMTS/GSM speeds on AT&T, which is way better than Edge, averaging anywhere from 500kbps-2mbps.
If TMo is essential or you can't change for whatever reason or live without HSPA+/LTE, consider getting a Blu phone or Moto E locally, they are relatively inexpensive (under $150) and are not amazing but will probably do the job.
Click to expand...
Click to collapse
Cool Alright. I actually had a chance to join AT & T family plan but didn't join it because T-mobile was giving more data :facepalm:
Ill see if i can switch to an AT & T network.
Thanks for your help one again man!
akonsand said:
Cool Alright. I actually had a chance to join AT & T family plan but didn't join it because T-mobile was giving more data :facepalm:
Ill see if i can switch to an AT & T network.
Thanks for your help one again man!
Click to expand...
Click to collapse
Try to test it first, just to be sure.
Sent from my MotoG3 using Tapatalk
akonsand said:
Hi,
I brought a Moto G from India, before coming the US for doing my masters.
The thing is here it does not pick up 3G or 4G bands. It just works on EDGE.
I wanted to ask if i can use the QPST method to unlock the bands? because I can see no information on it in the forums(for this phone). I am especially confused since it says nothing about dual sim phones and this is the dual sim variant of moto G
It would be great if someone would guide me how i could unlock the bands on my phone.
Regards,
Naved.
Click to expand...
Click to collapse
so far i know these are hardware specs and cannot be unlocked or changed.i mean to say moto g 2015 has different variants based upon hardware specs of their band support
If you started using att with your xt1550 ..how is it? Do you get 3g or lte?
I didn't start using it. Currently stuck with a group plan.. But I tried using a friends sim card.. 3g does work well with at n t.
Sent from my MotoG3 using XDA Free mobile app
Thanks for letting me know... I wish there was a way to get 'lte' ...someone has to come up with a way to unlock the bands lol. Thanks
I am currently having the samw problem, i bought a moto g which lte and 3g bands do not work in argentina. I tried the qpst method, but i got stuck in step 12 of the guide. If someone could make it work and explain how they did it, it would be awesome.
KentianAylomen said:
I am currently having the samw problem, i bought a moto g which lte and 3g bands do not work in argentina. I tried the qpst method, but i got stuck in step 12 of the guide. If someone could make it work and explain how they did it, it would be awesome.
Click to expand...
Click to collapse
Same here...I am trying qpst also but rf.nv manager keeps getting an error for me. Maybe we can work together on this. I also can't figure out the hidden menu..unless its *#*#4636#*#*
KentianAylomen said:
I am currently having the samw problem, i bought a moto g which lte and 3g bands do not work in argentina. I tried the qpst method, but i got stuck in step 12 of the guide. If someone could make it work and explain how they did it, it would be awesome.
Click to expand...
Click to collapse
hello i have the same problem with my moto g, i like to know if somebody have a solution (lo compre en andorra y aca en argentina no funciona, queria saber si aderribo o kentianAylomen lo habian resuelto mi correo es [email protected])
francoferrer said:
hello i have the same problem with my moto g, i like to know if somebody have a solution (lo compre en andorra y aca en argentina no funciona, queria saber si aderribo o kentianAylomen lo habian resuelto mi correo es [email protected])
Click to expand...
Click to collapse
Hey , I'm from argentina too and have the same problem. Could someone fix it? (hablemos en castellano)
The same problem with rf.nv manager. It always stops when I want to setting the COM. I edited some things of the program... Didn't work.
Hello,
I've got a LG Phoenix 2(K371) phone that I bought from Bestbuy and unlocked through AT&T
The phone is supposed to support the UMTS B1(2100 Mhz) frequency (as stated in specs).
I'm in North Africa right now for a business trip and unfortunately I wasn't able to get any 3G data with the local carrier that uses the UMTS 2100 Mhz frequency, I'm stuck with only 2G while my other phone works just fine.
I tried to change my Network Mode from 4G to 3G but the Network mode menu is missing!!!!!!
My questions are:
1- Does the K371 really supports the UMTS 2100 Mhz frequency ?
2- How can I change my Network mode from 4G/Lte to 3g/WCDMA?
Thanks
Did you ever get this sorted out? I am in Germany and can only get 2G also.
Same here in the UK! Only 2G.
My understanding is that either the official specifications of the phone are wrong - it doesn't support the HSDPA frequency of 2100 MHz, or (most likely) this frequency is disabled in the phone software settings since [email protected] doesn't use this frequency in the US. In any case it is very frustrating: I bought this phone convinced it is going to work while I am travelling in Europe, but obviously it doesn't as 2G data connection is useless.
Same problem in SE Asia. Phone doesn't have the right LTE bands but HSPC should work. Only getting 2G. No option in the hidden menu to change the modem RAT settings that I can see. *#546368#*371#
Anyone have any luck using the k371 overseas?
Same here...
I tried every single method I know in hopes that I could root the phone, but no luck!!!
I believe at&t disabled the said frequencies....
Our only bet is a proper root, and a custom rom..
any update on no UMTS 2100Mhz?
any solutoion on this issue?
I have found a solution. I am using it outside the US. I contacted my cellular provider, gave them the phone name (LG K371) and they sent me a text message with automatic settings for their data network. As soon as I opened it, I got a message like "data settings have been updated" and now it works on 3G and 4G without any issues. You may also be able to find these data configuration settings on your cell service provider's web site.
Seriously???
Please let me know is it AIRTEL service? since i am from INDIA.
we have the same problem in 2 mobiles..
Hmmm
I tried of calling and received setting for MMS , GPRS, INERNET but still i m seeing 2G symbol as E - edge detection
Please help me
Hi this is sainath
am also facing same problem, any one got solutions
please give reply.
tromal said:
Hello,
I've got a LG Phoenix 2(K371) phone that I bought from Bestbuy and unlocked through AT&T
The phone is supposed to support the UMTS B1(2100 Mhz) frequency (as stated in specs).
I'm in North Africa right now for a business trip and unfortunately I wasn't able to get any 3G data with the local carrier that uses the UMTS 2100 Mhz frequency, I'm stuck with only 2G while my other phone works just fine.
I tried to change my Network Mode from 4G to 3G but the Network mode menu is missing!!!!!!
My questions are:
1- Does the K371 really supports the UMTS 2100 Mhz frequency ?
2- How can I change my Network mode from 4G/Lte to 3g/WCDMA?
Thanks
Click to expand...
Click to collapse
Sorry for a late reply, but here's the real scoop about the LG K371 (AT&T)
First, being a "cheap" LG phone, there are very few bands actually included, and they only cover the main (not all) AT&T US frequencies, therefore it's no surprise that doesn't work on all overseas carriers. Again, they are covering only major US bands, and despite what it shows on the box or specs it may not be always true. B1 (2,100Mhz) band has different sub-bands, therefore it doesn't mean that the US B1 will work on an overseas B1, let alone the air-interface (2G/3G/4G/LTE) may not all be supported even if this sub-band exists.
Second, being that it's an AT&T phone, they are knows to load firmware with major restrictions for band selection called RAT Restrictions, which cannot be undone unless you can reflash it with a non-customized firmware, but you can't do that either due to the locked bootloader. A better option is to always go with the un-customized or Tmobile K7/K8 because they always have a lot more bands enabled than the AT&T version. Better yet, go with a Samsung which have more bands even on the AT&T models.
Bottom line, "cheap" phones along with AT&T restrictions will not work everywhere, despite the specs, and there's nothing you can do about it.
And my favorite old adage is "You get what you pay for!" LOL