[Q] HELP! Pandora Kernel rebooting problem - HTC Pico (Explorer)

Hi guyz i've installed Cyanogenmod10, rom works G8 but when i installed Pandora Kernel it caused bootloops problem.İt doesn't boot,everytime reboting on htc logo :crying: what's the problem is?
Note:I've sandisk ultra class10 sd with 1gb ext4 data and 64mb ext4 cache
sorry for bad english

anyone?

yag1z said:
anyone?
Click to expand...
Click to collapse
Pandora kernel is not supported by your pico so its bootlooping simple..
Or create a partition again then try if still not booting then the kernel is not supporting your device.

shubhojit89 said:
Pandora kernel is not supported by your pico so its bootlooping simple..
Click to expand...
Click to collapse
but why? every pico isn't same? i tried, the problem is every kernel on my pico

yag1z said:
but why? every pico isn't same? i tried, the problem is every kernel on my pico
Click to expand...
Click to collapse
Set the frequencies to 787 see if it bootloops if not its ok. But when you select 800 it bootloops then your device doesnt support 800 and beyond that.

shubhojit89 said:
Set the frequencies to 787 see if it bootloops if not its ok. But when you select 800 it bootloops then your device doesnt support 800 and beyond that.
Click to expand...
Click to collapse
every pll2 overclock kernel causing bootloops :crying:

Related

EMERGENCY! htc explorer crashes and reboots!

hi everyone!
i'm panic because since 2 days my phone crashes and restart without no reason! in some cases i had to remove the battery and reinsert it few times to make it works.
--> until yesterday evening!
i wasn't doing nothing especial with it, i was using facebook mobile and sms..when suddendly my phone crashed again but when i tried to remove and reinsert the battery a lot of time, the phone rebooted but it was always blocked on the white screen with HTC logo...
(i also noticed that if i put it on charging, the green battery icon doesn't appeared...)
..so i tried, using the recovery, a wipe/data factory reset..but it doesn't work...
this morning strangely my phone started regularly, but it worked nearly 5 minutes and then...it died again!
help me pleasee
sorry for my bad english..i hope you understand..
HTC EXPLORER, rooted, jaggyrom 2.6.1 overclocked 800mhz
Do you have a Stock backup
pchandra said:
Do you have a Stock backup
Click to expand...
Click to collapse
yes i've the stock rom to reinstall.. but i would know whats the problem that causes this malfunction!
angeldebby said:
yes i've the stock rom to reinstall.. but i would know whats the problem that causes this malfunction!
Click to expand...
Click to collapse
Jaggy Rom 2.6.1 oc version needs a good sd card.Check the thread for details
pchandra said:
Jaggy Rom 2.6.1 oc version needs a good sd card.Check the thread for details
Click to expand...
Click to collapse
i have an sd card class10 8gb!
i think it's good.... also because my phone worked very well in those 2 weeks since i've installed the rom!
Flash the Rom again. Maybe that will help. If it does not, try the 600 MHz version
Sent from my HTC Explorer A310e
angeldebby said:
i have an sd card class10 8gb!
i think it's good.... also because my phone worked very well in those 2 weeks since i've installed the rom!
Click to expand...
Click to collapse
Try a full wipe in the recovery

3D Max Rom on Optimus 3D P920

Is there anyone here flashed the 3D Max Rom of Acura Team on our Optimus 3D?
Is it working fine?
3D Capabilities like games camera movies?
Any known bugs?
Mine d/l now so I. Will flash and let u know
Sent from my LG-P925 using XDA
lazylu said:
Mine d/l now so I. Will flash and let u know
Sent from my LG-P925 using XDA
Click to expand...
Click to collapse
i already tried it.. after successfully flashing the latest 3d max rom v2 then reboot the phone it just stays on LG LOGO.. .
removed the battery then turn on again still, nothing happens.. .
i flashed it over to P920 stock rom v21e ~
Do full wipe (Format Data, System, cache, etc.)
And dnt flash kernel Maximum v1! Only ROM!
If u do like i say, all be fine
Sorry for my eng.
Evansir said:
Do full wipe (Format Data, System, cache, etc.)
And dnt flash kernel Maximum v1! Only ROM!
If u do like i say, all be fine
Sorry for my eng.
Click to expand...
Click to collapse
i did all of that.. nothing happens..
look here ..
http://forum.xda-developers.com/showpost.php?p=27917601&postcount=8
I do this:
Wipe data, cache
Install rom from CWM, reboot
Stuck on LG logo, wait 3 min.
Boot in CWM
Format data, system, wipe all
Install rom 1 more time, reboot
and all work good
Sorry for my eng.
Ive had the 3d max acura rom for a couple of days on my optimus 3d , and works well, so its a bit odd that its not working on yours :S did you format system in recovery mode??
rezzsha said:
Ive had the 3d max acura rom for a couple of days on my optimus 3d , and works well, so its a bit odd that its not working on yours :S did you format system in recovery mode??
Click to expand...
Click to collapse
Yes I Did .. Wiped data, cache dalvik cache even battery stats i wiped it too..
but when i booted the phone it stucks on LG Logo offcourse i waited until my battery gets heated up den i restore my backup coz nothing happens.. .
JastaPein said:
Yes I Did .. Wiped data, cache dalvik cache even battery stats i wiped it too..
but when i booted the phone it stucks on LG Logo offcourse i waited until my battery gets heated up den i restore my backup coz nothing happens.. .
Click to expand...
Click to collapse
Worked for me first wen i wiped system and data in advanced meny in cwm
Sent from my LG-P920 using xda premium
u need to format system, because ROM dnt do this automatically!
Sorry for my eng.
hmmmm ????
guys and where is the rom? I'd like to try it?
sorry for my english
wichniar said:
guys and where is the rom? I'd like to try it?
sorry for my english
Click to expand...
Click to collapse
https://www.wuala.com/caroceiro/optimus 3d/roms/acura/Acura3DMAX V2/?lang=en
Do The Usual Wipe Cache Wipe All Then goto Mounts IN CWM Mount System > Formart System > Mount Data Formart Data > Formart Cache > Install Acura3DMAX_V2.zip restart device
Kernels OC @ 1.2GHZ - Battery
1-V1-Maximo_V3(1200).zip
Kernels OC @ 1.3GHZ - Performance
1-V1-Maximo_V3(1300).zip
Kernels OC @ 1.4GHZ - Extreme LOL
1-V1-Maximo_V3(1400).zip
can someone tell me if this rom works?:good:
and that it is stable?
wichniar said:
can someone tell me if this rom works?:good:
and that it is stable?
Click to expand...
Click to collapse
it works and its stable
I tried installing the Acura 3D Max V2. I had it working with no problems at all except for the fact I could not get any connection with my carrier. I went into APN settings and it just told me reorganizing internal processes please try again after a short while. What would be the reason for me getting that error? Would it possibly be due to me using V20C? Do I have to switch basebands? And if I do what is the best one right now?
Thanks in advance
I have a little problem with the server, I can not get .. someone that he could give ... external link
thanks
wichniar said:
I have a little problem with the server, I can not get .. someone that he could give ... external link
thanks
Click to expand...
Click to collapse
I had that problem yesterday but just now i clicked and it's working now.. downloading as i write.
its very stable & very nice rom
I have the Acura3DMAX_V2 installed on my LG Thrill, works all well except I am using openvpn on Tmobile, whenever an app (Maps, etc) needs the gps location the data connection will be killed. It would try to reconnect of course, but while gps is still on, the process goes into a loop.
Internet research says this bug is linked to the supl setting of APN, but I have tried to use the *exactly* same APN setting with CM7, it worked just fine.
I wonder if any of you have had similar problem?
blkcavy98 said:
I tried installing the Acura 3D Max V2. I had it working with no problems at all except for the fact I could not get any connection with my carrier. I went into APN settings and it just told me reorganizing internal processes please try again after a short while. What would be the reason for me getting that error? Would it possibly be due to me using V20C? Do I have to switch basebands? And if I do what is the best one right now?
Thanks in advance
Click to expand...
Click to collapse
Same problem here, i´m with 21e, and installed Acura's V3.1 Rom. But the strange thing is when i install the rom with all formats, when i put the sim code, the phone give me a message that the sim code is wrong and i hat 3 more tries and after a while if found and regist in the network, this in a matter of minuts and i don´t do anything.
After that i can make a call about 10 min or less and then it goes to "reorganizing internal processes" all the time and i can´t make/receive any call. It´s been like that for a day.
Right now i'm trying to go back to my old rom.
Sorry for my english.

I need to find out the problem!

I have a HTC Sensation and it keeps freezing, i dont get it, i leave it and nothing happens but under an hour max itll freeze :crying:
I am running CM10 rom with faux kernal.
I have tried the trick by putting a piece of card on top of the battery and it didn't help much
Any help cause this is really frustrating me
imran429 said:
I have a HTC Sensation and it keeps freezing, i dont get it, i leave it and nothing happens but under an hour max itll freeze :crying:
I am running CM10 rom with faux kernal.
Any help cause this is really frustrating me
Click to expand...
Click to collapse
Well, you fixed your own problem. Faux kernel is ONLY COMPATIBLE WITH SENSE ICS!!!
Reflash the ROM and the kernel will be solved. Make sure you format all partitions before reflashing cm10.
Sent from my Ouya
AndroidSupporter318 said:
Well, you fixed your own problem. Faux kernel is ONLY COMPATIBLE WITH SENSE ICS!!!
Reflash the ROM and the kernel will be solved. Make sure you format all partitions before reflashing cm10.
Sent from my Ouya
Click to expand...
Click to collapse
I have CM10 but no sense installed also sorry its not faux kernal its sultan kernal (got mixed up)
Do you think having ICS instead of jelly bean will help?
imran429 said:
I have CM10 but no sense installed also sorry its not faux kernal its sultan kernal (got mixed up)
Do you think having ICS instead of jelly bean will help?
Click to expand...
Click to collapse
Nah, do you have this kernel? http://forum.xda-developers.com/showthread.php?p=35167538
Sent from my Ouya
AndroidSupporter318 said:
Nah, do you have this kernel? http://forum.xda-developers.com/showthread.php?p=35167538
Sent from my Ouya
Click to expand...
Click to collapse
Yes thats the one :laugh:
imran429 said:
Yes thats the one :laugh:
Click to expand...
Click to collapse
Did you try formatting all partitions except SD card and then flashing the ROM?
Sent from my Ouya
AndroidSupporter318 said:
Did you try formatting all partitions except SD card and then flashing the ROM?
Sent from my Ouya
Click to expand...
Click to collapse
I never made a partition and im sure i flashed the rom correctly
imran429 said:
I never made a partition and im sure i flashed the rom correctly
Click to expand...
Click to collapse
Which custom recovery do you have? 4ext is recommended by the way.
Go to wipe/format in custom recovery, and then select the option "format all partitions except SD card".
This will wipe your boot, system, data, and cache partitions on your phone (basically resetting your phone). Formatting all partitions is necessary because former Roms and software may leave incompatible files with cm10, so therefore that's why you need to "reset" or format all partitions on your phone.
Sent from my Ouya
AndroidSupporter318 said:
Which custom recovery do you have? 4ext is recommended by the way.
Go to wipe/format in custom recovery, and then select the option "format all partitions except SD card".
This will wipe your boot, system, data, and cache partitions on your phone (basically resetting your phone). Formatting all partitions is necessary because former Roms and software may leave incompatible files with cm10, so therefore that's why you need to "reset" or format all partitions on your phone.
Sent from my Ouya
Click to expand...
Click to collapse
Ill try that anything else you could recomened if that doesnt work?
imran429 said:
Ill try that anything else you could recomened if that doesnt work?
Click to expand...
Click to collapse
Hmm...I don't know. If that doesn't work, then I don't know what would work. Lagging is almost always associated with software, but a faulty digitizer could be the cause...
Sent from my Ouya
AndroidSupporter318 said:
Hmm...I don't know. If that doesn't work, then I don't know what would work. Lagging is almost always associated with software, but a faulty digitizer could be the cause...
Sent from my Ouya
Click to expand...
Click to collapse
Ill give it a go and let you know
also flash another kernel and see how it goes
rzr86 said:
also flash another kernel and see how it goes
Click to expand...
Click to collapse
Do you think changing the battery may help?
imran429 said:
Do you think changing the battery may help?
Click to expand...
Click to collapse
Try a different battery if you have one. If not it might be worth a shot picking up an Anker from Amazon - they're quite cheap and definitely worth it.
Try to monitor your CPU temps see if anything is out of the ordinary. Also sometimes Sultan kernel can be funny if flashed straight away, so maybe try reinstalling after wiping system/data/cache using recovery and then letting the ROM settle with stock kernel before flashing a new one.
Let me know how it goes.
AwsmStar said:
Try a different battery if you have one. If not it might be worth a shot picking up an Anker from Amazon - they're quite cheap and definitely worth it.
Try to monitor your CPU temps see if anything is out of the ordinary. Also sometimes Sultan kernel can be funny if flashed straight away, so maybe try reinstalling after wiping system/data/cache using recovery and then letting the ROM settle with stock kernel before flashing a new one.
Let me know how it goes.
Click to expand...
Click to collapse
okay so i tried the cpu moniter and at times it would use up 70-80+ of the cpu on using just whatsapp although it would fluctuate
im guessing this isnt a good thing :crying:
imran429 said:
okay so i tried the cpu moniter and at times it would use up 70-80+ of the cpu on using just whatsapp although it would fluctuate
im guessing this isnt a good thing :crying:
Click to expand...
Click to collapse
Whoa, 70-80 mb of RAM? That's a lot... if you use whatsapp often, then you will have to eliminate other processes/services that consume a lot of RAM.
Sent from my Ouya
imran429 said:
okay so i tried the cpu moniter and at times it would use up 70-80+ of the cpu on using just whatsapp although it would fluctuate
im guessing this isnt a good thing :crying:
Click to expand...
Click to collapse
I think 70 or 80% of CPU usage on Whatsapp is rather a lot although I've never used it myself so I can't compare. You could try maybe flashing something like HyperNonSense or ARHD and see how your phone behaves with that ROM. I've never used CM10.1 as my SIM card wouldn't work with it.
However I checked how much of the CPU my brothers phone was using and he's got a nexus 4, he was getting similar percentages.
But what I found out is that my phone heats up and reboots this may be a CPU fault
Sent from my HTC Sensation using xda app-developers app
Also I'm not using cm10 any more, I'm using AOKP initiate swagger ROM
Sent from my HTC Sensation using xda app-developers app
Hi,
Don't flash any kernel, flash the ROM once, and let it settle down, see if you get any freeze/reboot on iys own kernel...
Revelation™ ushered in a revolution... Right on, SebastianFM!

[Q] xperia L sudden freeze help!

well i was flashing phantom kernel to my xperia l (rooted and unlocked)
and after installing zip from cwm
i rebooted and the screen went off
now i remember the charge to be around 80%
after that i tried switching on the phone but no response it does vibrate once
on connection the wall charger the led shows red blinking light
i searched Google for the solution
some suggested a battery trick using the vol up button and power button for 20 sec
no success (multiple attempts)
PLEASE help me !!!
i am charging the phone right now (will wait for about 2 hours then try again)
Hi man, if you can't get to recovery on your phone, the only way to fix it that I know is to flash stock .ftf firmware via Flashtool using your PC (you can try to disable data and cache wiping if you didn't make backup) - both you can find and download here on XDA
Sent from my Sony C2105 using XDA Premium 4 mobile app
..
LoukaCZ said:
Hi man, if you can't get to recovery on your phone, the only way to fix it that I know is to flash stock .ftf firmware via Flashtool using your PC (you can try to disable data and cache wiping if you didn't make backup) - both you can find and download here on XDA
Sent from my Sony C2105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
well thanks i did that ,flashed the ftf and it worked
i found that bootloader was relocked
so i did unlock it again(didnt root this time )
flashed thunderzap via flashtool
but as for the next step to flash the zip in recovery,when i press the volume down button to get into recovery ,the phone gets stuck with the thunderzap logo and blue led light
what should i do
faced the same problem with phantom kernel
cant enter into recovery
http://forum.xda-developers.com/showthread.php?p=44243903 please take a look on third post if you did not anything wrong and if you use correct firmware version. Sorry in this case i can't help you more, i've never had this problem with my phone
Sent from my C2104 using XDA Premium 4 mobile app
,
LoukaCZ said:
http://forum.xda-developers.com/showthread.php?p=44243903 please take a look on third post if you did not anything wrong and if you use correct firmware version. Sorry in this case i can't help you more, i've never had this problem with my phone
Sent from my C2104 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks a lot for replying
i just re flashed stock ftf and completed the rooting and bootloader unlocking
gonna try thunderzap again
Good luck man, post your progress
Sent from my C2104 using XDA Premium 4 mobile app
..
LoukaCZ said:
Good luck man, post your progress
Sent from my C2104 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
well it all worked !! :laugh::laugh:
C2104
15.3.A.1.12
rooted and bootloader unlocked
running on thunderzap 3.1 ultra
the problems now i am facing are
1. random rebooting of the phone and after rebbot it shows android is installing application message
2.in trickster mod i just found the following features in the specific tab
multicore power savig
dynamic fsync
temp throttle
gpu governer
gpu max frequency
and cpu voltages
i was not able to find the other features mentioned in the kernel description
did i do something wrong or is this normal?
also where can i change the cpu frequency to 1.2ghz or something
(i ran antutu and result was 11640 approx and i saw someone getting 16k with this kernel
can someone please guide me for overclocking customization and the reboot problem...
;p
pettergriffin said:
2.in trickster mod i just found the following features in the specific tab
multicore power savig
dynamic fsync
temp throttle
gpu governer
gpu max frequency
and cpu voltages
i was not able to find the other features mentioned in the kernel description
did i do something wrong or is this normal?
also where can i change the cpu frequency to 1.2ghz or something
(i ran antutu and result was 11640 approx and i saw someone getting 16k with this kernel
can someone please guide me for overclocking customization and the reboot problem...
;p
Click to expand...
Click to collapse
That features are in specific tab..scroll to general tab,there you have frequency profile that you can set the frequency on your own
!!
faizalotai said:
That features are in specific tab..scroll to general tab,there you have frequency profile that you can set the frequency on your own
Click to expand...
Click to collapse
thanks i lot
i changed it and the scores really improved!!
but can u just help me out with the random reboot thing
its really annoying
the phone gets randomly rebooted and shows android is upgrading message for a moment
pettergriffin said:
thanks i lot
i changed it and the scores really improved!!
but can u just help me out with the random reboot thing
its really annoying
the phone gets randomly rebooted and shows android is upgrading message for a moment
Click to expand...
Click to collapse
can you tell me more what apps you've installed instead of stock..
did you flash any package that includes init.d files
the upgrading message is a normal thing for rooted phone as it write/check the cache file back
faizalotai said:
can you tell me more what apps you've installed instead of stock..
did you flash any package that includes init.d files
the upgrading message is a normal thing for rooted phone as it write/check the cache file back
Click to expand...
Click to collapse
do you mean the apps that need superuser permission?
titanium backup
trickster mod
luckypatcher
greenify
full!screen
well m not sure about the init.d file
i just flashed the phantom kernel first
and then the thunder zap ultra
edit : just found out someone having the same problem with the india firmware
http://forum.xda-developers.com/showthread.php?t=2603771
says to flash a diff country ftf
is that the only option
because i dont want to carry out the complete rooting,bootloader unlocking,kernel flashing and data restoring again
pettergriffin said:
do you mean the apps that need superuser permission?
titanium backup
trickster mod
luckypatcher
greenify
full!screen
well m not sure about the init.d file
i just flashed the phantom kernel first
and then the thunder zap ultra
edit : just found out someone having the same problem with the india firmware
http://forum.xda-developers.com/showthread.php?t=2603771
says to flash a diff country ftf
is that the only option
because i dont want to carry out the complete rooting,bootloader unlocking,kernel flashing and data restoring again
Click to expand...
Click to collapse
Maybe you can test by uninstalling greenify/fullscreen...enter cwm than wipe cache and dalvik..but before that please make nandroid backup....then see it for 1 day ..if the problem still occurred than you have to try flashing method
!!
faizalotai said:
Maybe you can test by uninstalling greenify/fullscreen...enter cwm than wipe cache and dalvik..but before that please make nandroid backup....then see it for 1 day ..if the problem still occurred than you have to try flashing method
Click to expand...
Click to collapse
i did that
but still the same problem (5 mins after booting just after wiping cache and dalvik
random reboot to xperia logo
:crying::crying:
edit
when wiping dalvik cache it shows
E: unknown volume for path [/sd-ext]
dalvik cache wiped
is this the right result command?
pettergriffin said:
i did that
but still the same problem (5 mins after booting just after wiping cache and dalvik
random reboot to xperia logo
:crying::crying:
edit
when wiping dalvik cache it shows
E: unknown volume for path [/sd-ext]
dalvik cache wiped
is this the right result command?
Click to expand...
Click to collapse
the wiping is correct then you have to try another method..
before flashing enter cwm, format system/cache/data then turn off the phone to make sure everything is cleaned..
i think your phone will stick with unlock bootloader..
for rooting just flash extended kernel...
for app and extra backup i suggest this app
normal
pro
..
faizalotai said:
the wiping is correct then you have to try another method..
before flashing enter cwm, format system/cache/data then turn off the phone to make sure everything is cleaned..
i think your phone will stick with unlock bootloader..
for rooting just flash extended kernel...
for app and extra backup i suggest this app
normal
pro
Click to expand...
Click to collapse
I'M ON IT
thanks for the reply
just one question
can i use this extended kernel
http://forum.xda-developers.com/showthread.php?t=2321550
by rachit rawat
pettergriffin said:
I'M ON IT
thanks for the reply
just one question
can i use this extended kernel
http://forum.xda-developers.com/showthread.php?t=2321550
by rachit rawat
Click to expand...
Click to collapse
Yes,of course..:good:
..
faizalotai said:
Yes,of course..:good:
Click to expand...
Click to collapse
i did that thanks a lot!:laugh::laugh::good:
now should i wait for a day or two to see the phone's behaviour
or should i download the rooted appsand flash the kernel now?(thunderzap)
pettergriffin said:
i did that thanks a lot!:laugh::laugh::good:
now should i wait for a day or two to see the phone's behaviour
or should i download the rooted appsand flash the kernel now?(thunderzap)
Click to expand...
Click to collapse
It would be better if we wait a day then you can proceed with thunderzap and others root app..

Rom/Kernel independent Reboots

Hey guys,
ive tried different roms (stock cm11s, mahdi, droidkang) with different kernels (stock, franco, ak).
I have completely wiped my device and set up everything new.
Still im getting reboots every now and then.
Mostly it happens to me while im surfing with chrome, but it also happened in the gallery, while watching movies and so on. Never had a problem while gaming.
Last_ksmg always says "kernel panic", followed by "failed to stop secondary cpus".
Please see the linked last_ksmg files.
https://dl.dropboxusercontent.com/u/16054199/last_kmsg6
https://dl.dropboxusercontent.com/u/16054199/last_kmsg7
Any help is highly appriciated, im getting really frustrated...
Are you using any kernel apps? What other apps are you using? Are you running Xposed?
The only app worth mentioning is lightflow, and i have changed dpi to 380 with texdroider.
thanks fir your reply
soulcrash said:
The only app worth mentioning is lightflow, and i have changed dpi to 380 with texdroider.
thanks fir your reply
Click to expand...
Click to collapse
Try reflashing everything through fastboot. Each individual partition, just to make sure everything is clear and wiped.
soulcrash said:
The only app worth mentioning is lightflow, and i have changed dpi to 380 with texdroider.
thanks fir your reply
Click to expand...
Click to collapse
I was having reboot issues will using both DPI changer and textdroider from the playstore. I would suggest getting rid of textdroider DPI and instead manually change it. Go into your file manger then system/build prop and look for LCD.density. It fixed my rebooting issues running Jedi Open Source rom.
Sent from my Oneplus one using XDA Free mobile app
Hey guys,
i have fastboot flashed the stock images of 25r, 33r and 38r, and even without installing one single app or changing any system settings, i get reboots.
Any ideas left, or is my hardware defect?
soulcrash said:
Hey guys,
i have fastboot flashed the stock images of 25r, 33r and 38r, and even without installing one single app or changing any system settings, i get reboots.
Any ideas left, or is my hardware defect?
Click to expand...
Click to collapse
Reboots are usually on the software level, but 38R actually had reboot problems. Best if you installed a custom kernel and tweaked it yourself, say AK.
Well, i have tried almost every possible rom-kernel-modem combination, including stock images with fastboot. I dont know where this could be a software problem...
soulcrash said:
Well, i have tried almost every possible rom-kernel-modem combination, including stock images with fastboot. I dont know where this could be a software problem...
Click to expand...
Click to collapse
Yes, but I and a couple of friends get those reboots too. It's a common problem, not easily diagnosed. If your last_kmsg gets written to, it's saying that a configuration has crashed and the software itself is requesting a forced reboot.
If the last_kmsg has nothing inside then it's obviously a hardware issue.
Sent from my OnePlus One using Tapatalk VIP
Hmmmm...
You say i should set up the ak kernel until it works on my device ... I have no clue what all these detailed settings, apart from mhz and voltage mean - can u recommend some "safe" settings for me?
soulcrash said:
Hmmmm...
You say i should set up the ak kernel until it works on my device ... I have no clue what all these detailed settings, apart from mhz and voltage mean - can u recommend some "safe" settings for me?
Click to expand...
Click to collapse
After you install ak, install UKM (flashable zip in recovery) and then install Synapse from the Play Store. Then go into Synapse and swipe the drawers to see these options.
CPU:
Set a safe non overclocking frequency
Governor: slim
Hotplug: CPU Boost by CyanogenMod
GPU Governor: msm-adreno-tz
Memory: Drop Caches Enabled
USB Fast Charge Disabled
Log Creation disabled.
Thanks for your help man, i still get reboots, im back at my nexus5 and wait if someone from the opo support answers me ... Frustrating.
have you the problem on all ROms after updating to R38? Some ppl are reporting that after R38 Update even other ROm Versions does the Random Reboot Bug....

Categories

Resources