bluetooth not working after update - ONE Q&A, Help & Troubleshooting

i updated CM11s and now bluetooth is not working anymore.
if i try to turn it on, it tries to activate bluetooth, then goes back off.
a full wipe didn't solved the problem, but it works with a clean rom (i tried mahdi, but i had to restore backup since monday i'm leaving for holidays and i don't have time to restore all i need on the mobile now).
i know i'm not giving many infos to have some help, but if you give me some directions i can try to fix it.
also, is it possible to reinstall CM11s with twrp or just through fastboot?
thanks!

I also have trouble with Bluetooth.
It tries to send file but either the app crashes or the file can't be sent.
Any info in that?

seems like noone has this kind of troubles

Hi! I just ran into the same problem: after upgrade to Cyanogen OS version 11.0-XNPH05Q, my bluetooth connection turns out to be unusable.
It first seems to connect (after "search for devices" is hit), but immediately when the call is initiated, the connection drops out (nokia BH-105).
Will check with my car installation too.
Is it possible to downgrade to previous Cyanogen OS version - I even don't know, which one was it... but at least it was working well!

Also having troubles with Bluetooth and my car-system since the 5Q update.
Before latest 5Q update everything works fine, but now neither of the devices can see the other one anymore
already deleted existing pairing in my car-system, but can't set up new pairing...
wondering if change of kernel can be a solution tho?

loth77 said:
i updated CM11s and now bluetooth is not working anymore.
if i try to turn it on, it tries to activate bluetooth, then goes back off.
a full wipe didn't solved the problem, but it works with a clean rom (i tried mahdi, but i had to restore backup since monday i'm leaving for holidays and i don't have time to restore all i need on the mobile now).
i know i'm not giving many infos to have some help, but if you give me some directions i can try to fix it.
also, is it possible to reinstall CM11s with twrp or just through fastboot?
thanks!
Click to expand...
Click to collapse
geri.st said:
I also have trouble with Bluetooth.
It tries to send file but either the app crashes or the file can't be sent.
Any info in that?
Click to expand...
Click to collapse
loth77 said:
seems like noone has this kind of troubles
Click to expand...
Click to collapse
nixnix33 said:
Hi! I just ran into the same problem: after upgrade to Cyanogen OS version 11.0-XNPH05Q, my bluetooth connection turns out to be unusable.
It first seems to connect (after "search for devices" is hit), but immediately when the call is initiated, the connection drops out (nokia BH-105).
Will check with my car installation too.
Is it possible to downgrade to previous Cyanogen OS version - I even don't know, which one was it... but at least it was working well!
Click to expand...
Click to collapse
J0ch3nK said:
Also having troubles with Bluetooth and my car-system since the 5Q update.
Before latest 5Q update everything works fine, but now neither of the devices can see the other one anymore
already deleted existing pairing in my car-system, but can't set up new pairing...
wondering if change of kernel can be a solution tho?
Click to expand...
Click to collapse
https://jira.cyanogenmod.org/browse/BACON-2822

nixnix33 said:
Hi! I just ran into the same problem: after upgrade to Cyanogen OS version 11.0-XNPH05Q, my bluetooth connection turns out to be unusable.
It first seems to connect (after "search for devices" is hit), but immediately when the call is initiated, the connection drops out (nokia BH-105).
Will check with my car installation too.
Is it possible to downgrade to previous Cyanogen OS version - I even don't know, which one was it... but at least it was working well!
Click to expand...
Click to collapse
this is still CM and not oxygen OS

Related

[Q] KitKat Update Issues

The OTA update showed up this morning. I chose to delay it because I was going to need my phone. Went to update it later and it just would not download. Did a factory reset and now when I go to system updates it says "checking for available update." for about a minute then says "check for update is not available at this time. Try again later." What am I missing here?
dwcosby said:
The OTA update showed up this morning. I chose to delay it because I was going to need my phone. Went to update it later and it just would not download. Did a factory reset and now when I go to system updates it says "checking for available update." for about a minute then says "check for update is not available at this time. Try again later." What am I missing here?
Click to expand...
Click to collapse
there have been quite a few people with this same issue. i havent seen any direct fix.
if you are locked, i would suggest you wait it out, or wait for the sbf file to get leaked. there is a way to sideload it, but its risky being locked and no sbf to save you if a problem comes up.
if you are unlocked, there are directions in the General forum to sideload the ota. there is no risk if you are unlocked.
if you are locked, the only thing i would suggest to try is re-flashing the stock 9.30.1 with rsd and see if it will pull the update afterwards. there is no guarantee this will work, but your phone will be 100% clean stock after the flash and give you the best chance to grab the ota if available.
dwcosby said:
The OTA update showed up this morning. I chose to delay it because I was going to need my phone. Went to update it later and it just would not download. Did a factory reset and now when I go to system updates it says "checking for available update." for about a minute then says "check for update is not available at this time. Try again later." What am I missing here?
Click to expand...
Click to collapse
Did you download it and then said to apply it later? If so, are you rooted? If so, hook up your phone to your PC and adb shell into it. Type "su" and hit enter to go into superuser mode.
Navigate to the /cache directory and you should see the OTA .zip file sitting in there. Copy it to your external SD card and then you can load it manually via the recovery.
If you're not rooted, then you won't be able to navigate into the /cache directory. Or, if you didn't have it download when you got the notice (or couldn't download it), then it won't be there.
More update issues
My wife & son both have the HD. My wife checked for the update this morning, said it was ready and proceeded to download. Update did as it was supposed to and when it was done, she had KitKat and that's when things went a bit wonky.
If she has Bluetooth turned on, WiFi connection drops after a few minutes. She googled possible workarounds and none really worked. As long as she is not using BT, WiFi stays up
Has anyone else seen this behavior? She refuses to let me root it and install a custom ROM as I have done on my Samsung GS4 from VZW.
In the mean time, we've told our son not to take the update until
we know more about a possible fix.
zeb carter said:
My wife & son both have the HD. My wife checked for the update this morning, said it was ready and proceeded to download. Update did as it was supposed to and when it was done, she had KitKat and that's when things went a bit wonky.
If she has Bluetooth turned on, WiFi connection drops after a few minutes. She googled possible workarounds and none really worked. As long as she is not using BT, WiFi stays up
Has anyone else seen this behavior? She refuses to let me root it and install a custom ROM as I have done on my Samsung GS4 from VZW.
In the mean time, we've told our son not to take the update until
we know more about a possible fix.
Click to expand...
Click to collapse
Fix was just posted recently. do a factory reset. It sucks, but its the only option.
Factory REst doesn't solve 4.4.2 WIFI issue on Razor MAxx HD
TXKSSnapper said:
Fix was just posted recently. do a factory reset. It sucks, but its the only option.
Click to expand...
Click to collapse
Android V 4.1.2 worked flawlessly since Nov 1023 upgrade. Decided to upgrade to KitKat via OTH. Had WIFI connection issues right away ( inability to obtain IP or lost connection, etc.) This happened with Bluetooth ON or OFF, no difference. The Signal strength was much lower than when on the previous android version and subsequent indicated connection speed was at least 1/2 of what I was getting previously.
Worked with Verizon and Motorola tech support personnel and did multiple factory resets with no improvement.
Since I wanted a factory solution and had insurance on the phone, I ordered a replacement phone. Thankfully, the new phone had 4.1.2 and worked perfectly. WIFI issues are gone.
Conclusion, KitKat is not ready for prime time yet. WIFI bug needs to be worked out before I will upgrade again.
egutwillig said:
Android V 4.1.2 worked flawlessly since Nov 1023 upgrade. Decided to upgrade to KitKat via OTH. Had WIFI connection issues right away ( inability to obtain IP or lost connection, etc.) This happened with Bluetooth ON or OFF, no difference. The Signal strength was much lower than when on the previous android version and subsequent indicated connection speed was at least 1/2 of what I was getting previously.
Worked with Verizon and Motorola tech support personnel and did multiple factory resets with no improvement.
Since I wanted a factory solution and had insurance on the phone, I ordered a replacement phone. Thankfully, the new phone had 4.1.2 and worked perfectly. WIFI issues are gone.
Conclusion, KitKat is not ready for prime time yet. WIFI bug needs to be worked out before I will upgrade again.
Click to expand...
Click to collapse
That's a shame because for me, the FDR fixed the Wifi/Blue-tooth issue as it did for many others. Might have been a hardware issue (faulty radio, etc).

[Q] Which unlock tool to unlock v4.1.1?

Hello I am still dealing with a weird problem that I posted on this forum over a year ago that was never resolved. Basically my tablet is stuck running Android version 4.1.1 (Build JRO03C.US_epad-10.4.4.25-20121228) because if I upgrade to any new versions (whether I do it as OTA or via micro USB) my wifi card stops functioning (it does not see any networks). Anyways I even went so far as to RMA it and Asus said they fixed it, shipped it back to me, but in reality all they did was roll me back to 4.1.1, saw the wifi was working and shipped it back to me saying they "fixed" it. Well of course the second I got it back I installed the OTA and wifi broke again... So I just rolled back to 4.1.1 and said screw it, I just won't update it anymore. Well this week I figured I'd try installing the latest OTA and hoped that this version would not kill my wifi, unfortunately the same exact issue has occurred and thus I have once again rolled back to v4.1.1 and my wifi works perfectly...
TLDR; Anyways apologize for the rant/story but basically I am stuck with using version 4.1.1 of Android and am considering flashing a custom rom to try and resolve some issues I am having with the stock rom's wifi, however the official bootloader unlock tools only say they work on version 4.0 (ICS) or version 4.2 (JB). I'm stuck on v4.1.1 so which tool should I use (or am I out of luck)? Thanks
v7 worked your JB version, but I think v8 will work as well. Just try them both - it's just an app. Either it works or not....
But that is the weirdest thing I've heard in a while (reg. WiFi).
What have you done on your router side? I cannot believe this is a problem with the tablet's wifi card.
Is this 'wifi not working' consistent on any router, any network?
Did you reset the router, change the channel?
Do you have possible interference: microwave, bluetooth speakers, bluetooth enabled or any other device that uses radio waves anywhere in the vicinity of the tablet?
berndblb said:
v7 worked your JB version, but I think v8 will work as well. Just try them both - it's just an app. Either it works or not....
But that is the weirdest thing I've heard in a while (reg. WiFi).
What have you done on your router side? I cannot believe this is a problem with the tablet's wifi card.
Is this 'wifi not working' consistent on any router, any network?
Did you reset the router, change the channel?
Do you have possible interference: microwave, bluetooth speakers, bluetooth enabled or any other device that uses radio waves anywhere in the vicinity of the tablet?
Click to expand...
Click to collapse
Thanks appreciate the reply - I just wasn't sure if using the wrong unlocker could brick my device... I'll give 8 a try first then 7 if necessary. The ironic part is that it requires a network connection to complete the unlock operation (I guess so Asus can cross your S/N forever off of their list of devices under warranty).
I agree that this is a strange problem as I have not seen anyone else report it. Basically I tried resolving this about 13 months ago with the help of this board and as mentioned I finally had to RMA it, but ASUS just rolled the version back instead of fixing anything and at that point I just wanted to enjoy using my tablet more than I wanted to fight with ASUS's customer service reps who effed up the first RMA job (the language barrier was also apparent in my interactions with them)...
Since over a year has gone by since the last time I tried an OTA, I hoped that the latest update would not have the same issues but alas, I'm not that fortunate.
As far as what I've tried - I have tried connecting to different networks and changing router channels and checking for interference, but the thing is, I'm quite certain the problem is with the tablet. When I first had the problem I lived in an apt building where I could 'see' 10+ wifi networks at any given time on all different channels with different routers/security settings etc. As soon as I applied the OTA the tablet could no longer 'see' any of them (even as I sat with my laptop/phone connected to wifi right next to it). I now live in a house (and have a different ISP, and a different router) and tablet works perfectly when on version 4.1.1. I don't have as many wifi networks visible from my house, but can still see a few of my neighbor's wifi networks both on the tablet (v4.1.1) and on other devices. But the second that I upgrade, all of them disappear from the tablet's view (but continue to be visible/work on other devices). I have turned wifi on/off, turned airplane mode on/off, tried connecting via wifi direct, rebooted, cold booted, booted into recovery, factory reset all data, etc. but nothing works because the tablet cannot see any wifi networks. And the second that I rollback to version 4.1.1 the wifi works perfectly... I have upgraded and rolled back probably at least 6 times and it is always the same result.
I do also get another weird side affect when I upgrade - the tablet refuses to turn off when I'm on any version higher than 4.1.1. So if I press "Shut Down", the tablet displays "shutting down" and the screen goes black and becomes non-responsive (as do the buttons, just as you would expect when turning off), but it does NOT actually shut down because if I come back 30 mins, an hour, 2 hours later I can feel it running very hot. The only way to truly shut it down is to let the battery drain...
So maybe a better question on my part would have been, do you think installing a custom ROM will even help resolve this issue? Or should I continue using 4.1.1 and not risk making the situation worse with custom ROMS?
WiFi problems are often kernel related..... Did you always take the update OTA?
Did you ever try to flash the latest firmware version manually? OTA updates do go wrong sometimes....
Although repeatedly???? It's weird. Maybe the server your tablet pulled the OTA from hosts a bad copy????
If you do not want to unlock, manually flashing the firmware would be one thing to try. OTA's patch the existing system, replace old files with new ones where necessary. Manually flashing the firmware replaces everything - a totally new installation of everything: bootloader, recovery, kernel, system and data.
But you cannot make it worse by flashing a custom rom. You unlock, flash a custom recovery (which does not change anything else on your system), then you make a nandroid (backup) of your current 4.1.1 system before you flash a rom. So you would always be able to go back to where you are now. On a custom rom you could even try out different kernels, which often are the root cause of wifi problems..
The thing is: If you want to flash a current custom rom like CROMi-X, based on Asus JB 4.2.2, or CROMBi-KK/CM11 which are KK roms, you always have to update your bootloader first. Your .25 bootloader is too old for any current rom.
You can easily do it once you have a custom recovery installed, but even easier would be to update to the latest Asus firmware 10.6.1.14.10 (after unlocking), then flash the custom recovery (TWRP 2.8.1.0), then flash a rom of your choosing.
Downside of this route would be you wouldn't have that 4.1.1 nandroid I mentioned earlier.....
Nahhh - thinking about it, I would recommend you go this route:
Unlock,
flash an older version of TWRP compatible with your current bootloader (TWRP 2.6.1.0 is ok)
make a nandroid of your current system
do a full wipe of cache, Dalvik and data in recovery
flash the 10.6.1.14.10 bootloader in recovery (I can talk you through it)
flash TWRP 2.8.1.0
flash a rom of your choice
Check out my guide, link in my signature, and let me know if you have questions
Thanks - I was able to successfully unlock my device with v7 of the unlock tool (v8 wouldn't even install). Thanks too for the advice on how to flash a custom rom safely. I've never flashed a custom rom before (have rooted a different android device before tho), so I appreciate any help.
I downloaded the blob file for TWRP 2.6.1.0 from here (techerrata.com/browse/twrp2/tf700t), but not sure how to proceed next, (also I don't see a link in your signature to your guide, but I am running a bunch of script blocking addins so maybe that's why) seems like all the guides I am finding say I need to get a copy of a fastboot program (but don't provide links), where can I find that? Again, I appreciate the help.
Sorry, my bad, I don't have a signature on XDA - wrong forum. LOL
My thread is here: http://forum.xda-developers.com/showthread.php?t=2688891
Ask any questions you may have in that thread, but it should cover your questions - I hope

Wifi Doesnt Show any available connection

hi,
I have a nexus 5 with lollipop 5.0.1, xposed (gravity box, amplify and greenify activated) and franco kernel.
My problem is that in the wifi settings i dont see any wifi available, my phone just connects to the few wify that i had already saved.
I donwload a third party app (wifi manager) and from the app i can see every connection available near me, so the problem must be rom related, not hardware related.
I tried flashing system and boot from 5.0 image, but that didnt solve the problem (i tought that going back to stock kernel and deactivating xposed would have helped). So i tried to flash 5.1 (i'm actually still with 5.0.1 because i want to use xposed), i flashed boot system radio and bootloader and that solved the problem, without wiping any data or app.
Since that solved the problem i thought that maybe bootloader or radio had something to do with it, ann i flashed again 5.0.1 with the new bootloader and the new radio but the bug was still there, nothing changed.
Is this a common bug?i searched in the forum and trough google but i couldnt find anyone with my exact problem, do you think you can help me?
If you need any log i'll post it here, just tell me what you need!
Thanks in advamce
AtField said:
hi,
I have a nexus 5 with lollipop 5.0.1, xposed (gravity box, amplify and greenify activated) and franco kernel.
My problem is that in the wifi settings i dont see any wifi available, my phone just connects to the few wify that i had already saved.
I donwload a third party app (wifi manager) and from the app i can see every connection available near me, so the problem must be rom related, not hardware related.
I tried flashing system and boot from 5.0 image, but that didnt solve the problem (i tought that going back to stock kernel and deactivating xposed would have helped). So i tried to flash 5.1 (i'm actually still with 5.0.1 because i want to use xposed), i flashed boot system radio and bootloader and that solved the problem, without wiping any data or app.
Since that solved the problem i thought that maybe bootloader or radio had something to do with it, ann i flashed again 5.0.1 with the new bootloader and the new radio but the bug was still there, nothing changed.
Is this a common bug?i searched in the forum and trough google but i couldnt find anyone with my exact problem, do you think you can help me?
If you need any log i'll post it here, just tell me what you need!
Thanks in advamce
Click to expand...
Click to collapse
http://forum.xda-developers.com/google-nexus-5/help/wifi-stuck-t2721643
beekay201 said:
http://forum.xda-developers.com/google-nexus-5/help/wifi-stuck-t2721643
Click to expand...
Click to collapse
Thanks for the answer but my WiFi actually turns on without any problem, and also connect to the few WiFi that I already had saved! And with a third party app i actually have no problem, It works as it should
Anyone?
Bump! I still have this problem

Hot Spot Issue - Continued

Hello everyone sorry for this new thread and but I wanted to make sure I give more information on a fresh thread so I can hopefully fix this issue.
The issue I'm having is: When Hotspot is enabled on my Mate 8 Device, the 4G connection does not work on the device itself. However, anyone connected to the hotspot that I enabled has internet access via my Mate 8. Both cannot work simultaneously, only one or the other. This started 3 days ago.
What I did to perhaps cause the issue:
I rooted the factory ROM and changed something with the "Disable Service" app. I diabled the FusedLocation service. I rebooted then it was stuck on bootloop
I proceeded to wipe the phone on TWRP and installed a B180 ROM(Basic, stock international room - rooted) - Problem with Wifi Hotspot persists.
I thought it was the ROM's issue so I upgraded to B320 OEM ROM via 'dload' method - Problem Persists
Installed TWRP 3.0.2 and flashed another L29 B3xx ROM - Problem persists.
every time I installed a new ROM I wiped everything off the phone before I did so.
I'm absolutely stumped.
Please see the image i attached to my findings on my phone.
As you can see when Hot Spot is on, the 4G is "disconnected" and does not get an IP address.
Image Link
https://drive.google.com/file/d/0B-rbvYjlRN26bC1rbkpZYUc0dDA/view?usp=sharing
Any help is greatly appreciated again. Thank you for your time!
Eddie
Hi, I have the exact same issue, I am using a completely stock phone, with stock recovery and not rooted.
Have you found a fix to this problem?
Thanks.

Broken bluetooth after perform a OTA

Hi guys i have a problem with the bluetooth after OTA 10.5.7 to 10.5.8 (Europe version).
My bluetooth was broken, and show "activation..." and turn automatically in loop.
The problem is that activation of bluetooth isn't possible after OTA.
Does anyone have an idea ?
Hi. I also updated to 10.5.8 my EU version. Just tested the bluetooth. No issues here with me... Sorry, not of much help
Ok I will try to port the rom to fastboot and make a clean flash (without wiping Internal Storage). Thank's for you reply.
Doesn't work, I have reinstalled OOS rom fully.
And bluetooth switch to on/off without any reason.
I have tried :
- Reinstall Rom
- Delete network data
- Stop bluetooth app clear data and cache and reboot
All doesn't work
Full flash with MSM if it does not work it's a hardware failure ?
TekCoco said:
Hi guys i have a problem with the bluetooth after OTA 10.5.7 to 10.5.8 (Europe version).
My bluetooth was broken, and show "activation..." and turn automatically in loop.
The problem is that activation of bluetooth isn't possible after OTA.
Does anyone have an idea ?
Click to expand...
Click to collapse
Hi @TekCoco , I found this thread only now, but I also have the same bt "activating" loop.
It started to happen to me last October when I updated via OTA 10.5.8 to 10.5.9.
Now I updated to 10.5.10 but sadly nothing changed.
It's been months since I cannot use BT at all.
I also opened a thread at the time: https://forum.xda-developers.com/t/bluetooth-not-working-after-ota-update-to-10-5-9.4183671/
How did you manage to solve that?
Thanks

Categories

Resources