Database Info

Keep root with JB update?

As we wait for the JB update in US, I was wondering if there's a proven method to keep root on note 10.1?

grimloktt said:
As we wait for the JB update in US, I was wondering if there's a proven method to keep root on note 10.1?
Click to expand...
Click to collapse
I always use voodoo root keeper just to be safe
Sent from my EVO using xda premium

Install the update through mobile ODIN....

Install root without odin?
ultramag69 said:
Install the update through mobile ODIN....
Click to expand...
Click to collapse
I updated via Keis (bad mistake!) and lost my root. Even worse, I lost the ability to boot into cmd -- every time I do the Control + power routine I get booted into Android Recovery. Without the ability to get my tablet into download mode, I can't connect with Odin.
Please help --
Either........ is there another way to boot into download mode?
Or........... is there a way to install cmd on my tablet without using odin?
Please....... I am not new to rooting but I need a bit of detailed description. I'm very afraid of bricking my lovely tablet.
thanks,
Barb

Volume down+power button will get you into download mode volume up+power will get you into recovery
Sent from my EVO using xda premium

Robert542 said:
Volume down+power button will get you into download mode volume up+power will get you into recovery
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks for the response -- however the process you describe does not work after this Kies upgrade. Volume down + power does not get me into download mode -- instead I get stuck in the Android system recovery (3e). (Same with the volume up+power.)
My only options in this Android sytem recovery are to:
reboot
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
I am wondering -- what if I were to place the clockword mod recovery zip file on my sd card and then use "apply update from external storage", or simply reboot.
Any thoughts or suggestions? I was also told I might be able to get into download mode through adb.
Thanks again for dialogue.
Barbara

No chance... Stock recovery needs the zip files to have samsung approval, not only that but it won't allow a different region rom to be flashed either.... Looks like you screwed the pooch on this little puppy...

nabour said:
I updated via Keis (bad mistake!) and lost my root.
Click to expand...
Click to collapse
Did you update to JB?

Just clarify, please
ultramag69 said:
No chance... Stock recovery needs the zip files to have samsung approval, not only that but it won't allow a different region rom to be flashed either.... Looks like you screwed the pooch on this little puppy...
Click to expand...
Click to collapse
So just to clarify, you are saying that it doesn't matter whether I can get into download mode or not (which I was able to do, with ADB), because ANY clockwork mod recovery file that I find will be unloadable (because it won't "play" with stock recovery)? Is that correct?
Don't want to sound argumentative, but does that mean that anyone who upgrades their firmware via "official Samsung" will be unable to root in the future? That's not too cool.
But if so, I can live with it.
Again, I appreciate your time.
Barb

I know with the S3 there is a root tool that allows rooting via ADB but I don't believe this has been developed for the Note 10.1 as yet. Everything is done via ODIN... Unless you wish to try the 1st method from this thread to get root access - http://forum.xda-developers.com/showthread.php?t=1831152 - then install a version of CWM manually...
Stock root is very picky about what it will or wont flash.... Even if you have a stock rom, if the CSC oodes, region, doesn't match it will error out...

grimloktt said:
Did you update to JB?
Click to expand...
Click to collapse
No........ that's the goofy part of it. I had an upgrade waiting for me (under "settings, upgrade" and so I stupidly assumed it was the official jellybean. Wrong, wrong! I was simply upgraded to 4.0.4. I can't see any noticeable changes, except for the Android Recovery system having booted out my Clockwork recovery (and the root, of course.)
I've decided to wait a week or so until I get the official jellybean and then decide what to do.

It will also have given you a new template in s-notes - landscape and the scroll bar... It will also have given you the ability to use an exFAT formatted sd card... There were a few other tweaks but not too much...

[GUIDE][I9500][Help Thread] Updating, Resolving soft bricks, root issues and stuff.

This is the guide for updating to 4.3 from stock unrooted state or while having a custom rom on it.
Many people have suffered bootlops or worse issues when trying to update to 4.2.2. Alright. Thisthread will also be used for helping people who hace bricked their devices and i will actively help whenever i can.​
This process is quite tedious for unpatient people so stay away from the thread if you cant follow all the steps.
Pre-requisites:
Galaxy S4 I9500 (exynos/octa)
odin version 3.09 (attached to 2nd post)
A stock 4.3 firmware package (take it from firmware thread)
cwm 6.0.4.4 by S.a.M.e.R_d (for root users) link: http://forum.xda-developers.com/showthread.php?t=2489234
adonis.pit (8.94 gb) (attached to 2nd post)
cf autoroot(for root users) link: http://forum.xda-developers.com/showthread.php?t=2292615
Degrated Shadow's KNOX Remover.zip script (attached to the post
some patience and brain (no links for these .. lol.. cant attach either)
Scenario 1: You aren't rooted and have all the status's official and old bootloader on 4.2.2
Best way for you is to connect to the kies and download and update and install it through kies.
Do not download otas.
For some people it gives bootlopping error and for some it just works alright. It bootlop'ed for my brother but not for my friend who were on same stock firmwares and all.
if it is bootlopping now
1. Go to recovery (when phone is switched off press power butoon+volume up+home button)
2. Wipe Data/Factory Reset (this will wipe your data and its necessary because now you cant downgrade without triggering you warranty bit)
Scenario 2: You are on prerooted stock firmware.
Download the 4.3 firmware package(with 4 files)
Set the drivers up on windows
1. Open Odin v3.09
2. Put appropriate files in AP BL CP CSC
AP=previously PDA
BL=bootloader
CP=Modem
CSC=file starting with CSC
3. Download the adonis it and put it in pit.
4. Connect device in download mode (when phone is switched off press and hold power button+volume down+home button)
Voila you are done.
Scenario 3: You are rooted and are on custom roms or a custom pit (adonis_c.pit comes with 11.82 gb storage which is incompatible with 4.3 firmwares.
1. Flash pit seperately without the firmware package in odin v3.09
2. Perform a battery pull then put the battery back
3. Go into download mode (when phone is switched off press and hold power button+volume down+home button).
4. Flash the 4 package file
AP=previously PDA
BL=bootloader
CP=Modem
CSC=file starting with CSC
5. Flash cf autoroot by chainfire by putting it in AP
let it root and install stock recovery
6. Go back to download mode and install GT-I9500-CWM-6.0.4.4.tar Build #1 as AP
Step 7 and following are to be followed for using custom roms although they arent available at the time this is posted. wanam has relesed 3.0 but is a test rom
7. Boot back into recovery and go to mounts and storage
Format everything except the ext sd card
8. Wipe Data/Factory Reset
Wipe Cache
Wipe Dalvik Cache(in advanced menu in cwm)
this whole step might seem unnecessary but always be at the safer side
9. Install the custom rom and boot back into android
10. Flash the KNOX remover script by me
11. YOU are good to go
Voila you are done
NOW FOR ROOT USERS
after setting up all accounts and stuff
1. Go to play store.
2. Update supersu.
3. Open supersu and install the binaries.
4. Flash the KNOX remover script by me OR Install Titanium Backup link: https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en
5. Freeze or delete all knox crap. ( I prefer deleting).
6. Reboot.
Now you are set and ready to install all the apps and root is working.
Scenario 4: you are on 4.3. want to flash a custom rom. and dont care about warranty.
1. Flash CF autoroot by chainfire/ Flash latest perseus kernel
2. Then power off. go to download mode (power button+Home button+volume down)(
3. Flash cwm 6.0.4.4
4. Flash any custom rom you want now from recovery. but remember to format system atleast once before that.
Credits: @Chainfire ( for cf autoroot)
@S.a.M.e.R_d (for cwm 6.0.4.4
@wanam (for explaining that the security policy is hardcoded into the kernel)
@nickboy360 (He will also help people in my absence because of boards)
@runedrune (for solving my doubts in day to day life)
Samsung (for knox crap, painful security policy, irritating enforcing mode of selinux, and the smoothest ever touchwiz ROM)

Alright. SO this thread will be used for hel;ping people who have soft bricked their devices or similar issues like not getting root or sound problems
My friend @nickboy360 is going to help you all in my absence although he will buzz me when there is a confusing case.
This place wont stand for spammes and they will be reported.
Peace
​
all the attachments are here

Dude you seriously made my ****ing day !!!! I LOVE YOU !!!!!! I have been cracking my head since i tried to boot rom !!!!!! YIPPI A kingCobra 4.3 is soon to be realesed . AGAIN I LOVE YOU . Rated 5 stars and shared

S.a.M.e.R_d said:
Dude you seriously made my ****ing day !!!! I LOVE YOU !!!!!! I have been cracking my head since i tried to boot rom !!!!!! YIPPI A kingCobra 4.3 is soon to be realesed . AGAIN I LOVE YOU . Rated 5 stars and shared
Click to expand...
Click to collapse
thanks and please share your recovery here too when it is updated.
thanks in advance

Degrated Shadow said:
thanks and please share your recovery here too when it is updated.
thanks in advance
Click to expand...
Click to collapse
No problem bro
BTW I will request this thread to be posted on XDA news i imagine noobs with out you .
I booted the rom with odin but not with my custom boot loop . As soon as i het home it will be test test test .

Why is there a need for the PIT file?

Simonetti2011 said:
Why is there a need for the PIT file?
Click to expand...
Click to collapse
Because by using pit file you can restore partitions to their correct size or automatically fix any partition error
Sent from my GT-I9500 using Tapatalk

i cant freeze knox services(there are 5). Its only on donation versions. Any ideas?

royts2007 said:
i cant freeze knox services(there are 5). Its only on donation versions. Any ideas?
Click to expand...
Click to collapse
download a root app
navigate to /system/apps
delete everything you find related to knox.

Degrated Shadow said:
download a root app
navigate to /system/apps
delete everything you find related to knox.
Click to expand...
Click to collapse
Can i have a link? And u sure its safe?

royts2007 said:
Can i have a link? And u sure its safe?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=en
perfectly safe.
dont go on a deleting rampage of other apks without asking thoug.
u see the word knox u select and delete it without a hitch

Degrated Shadow said:
https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=en
perfectly safe.
dont go on a deleting rampage of other apks without asking thoug.
u see the word knox u select and delete it without a hitch
Click to expand...
Click to collapse
Thank you it worked.
What about KLMSAggent.apk/odex ? Delete both of them too?

i have problem with my s4
after i flash pit and stock room, then i flash cfroot, them 6.044, after all of them i install wanam3 from cwm, reboot, after "SAMSUNG S4 i9500" text then blank.. all black... may u help me?

deadball80 said:
i have problem with my s4
after i flash pit and stock room, then i flash cfroot, them 6.044, after all of them i install wanam3 from cwm, reboot, after "SAMSUNG S4 i9500" text then blank.. all black... may u help me?
Click to expand...
Click to collapse
format all the things in mounts and storage in recovery except the ext sd card and install wanam 3.0 again.
you will be good. And follow the zteps carefully

royts2007 said:
Thank you it worked.
What about KLMSAggent.apk/odex ? Delete both of them too?
Click to expand...
Click to collapse
Yes delete the .odex files too only for knox and klmsagent.apk

hi, is there a "standard" 4.3 firmware I can use as my country hasn't released 4.3 yet? XFE (South Africa) is currently only on 4.2.2.

mattdt said:
hi, is there a "standard" 4.3 firmware I can use as my country hasn't released 4.3 yet? XFE (South Africa) is currently only on 4.2.2.
Click to expand...
Click to collapse
You can use the India or russian version
Can I restore a nandroid backup I made in 4.2.2 after updating to 4.3?

Guys I have installed the Russian official coming from arrows rom. Everything went well and I'm running 4.3 successfully. I now want to install wanams 4.3 but I'm not sure what the adonis.pit file is for? I have the I9500 32gb... do I just copy wanam to my sd and flash through recovery?
Sent from my GT-I9500 using xda app-developers app

atsavlis said:
Guys I have installed the Russian official coming from arrows rom. Everything went well and I'm running 4.3 successfully. I now want to install wanams 4.3 but I'm not sure what the adonis.pit file is for? I have the I9500 32gb... do I just copy wanam to my sd and flash through recovery?
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
root with cf root
flash cwm 6.0.4.4 in AP
go to recovery
format everything under mounts and storage menu ecpet ext sd card
flash wanam 3.0

OP updated with a knox remover script by me.
enjoy!!!!

Tab 2 will only boot to CWM

So we were trying to update my friend's Tab 2 to a 4.4.2 ROM. We got CWM 6.0.2.3 installed, and tried a ROM. Well this failed, and appeared to break other stuff as it now boot loops to CWM. Actually I think it's going every other book to CWM. Right now it's saying battery depleated. I've got it plugged intoa charger, hopefully it'll take a charge.
I did later realize we weren't using a new enough version of CWM, but regardless, any ideas how to recover from this? It does not appear to be able to go into download mode. It only goes to CWM. I've tried flashing other ROMs but that doesn't seem to be working either.
So...kinda stuck for the moment.
Thanks!

colema19 said:
So we were trying to update my friend's Tab 2 to a 4.4.2 ROM. We got CWM 6.0.2.3 installed (...)
Click to expand...
Click to collapse
We have a winner... the next one who didn't pay any attention - i.e. reading the OP post of the ROM thread.
ClockworkMod Recovery 6.0.x.y is ONLY for flashing CyanogenMod up to 10.1.3.
For flashing OMNI ROM or CyanogenMod 11 (both Android 4.4.2 at the time of writing) you _NEED_ to use TWRP (recommended for OMNI) or PhilzTouch Advanced Recovery or ClockworkMod Swipe Edition (recommended for CM11). See AndroidAndi's file repository to obtain a copy of the correct recovery for your particular model of the Tab 2.
Next thing to do: Download and install ODIN, install the "Samsung USB Drivers" (Google's your buddy), download the .tar.md5 of the recovery you want to flash (see above and make a choice), put the tablet into download mode, flash the recovery.
If that worked flash the custom ROM of choice (+gapps if CM11, +SuperSU if OMNI) through the custom recovery you just installed and be glad you didn't turn the tablet of your friend into a paperweight.

BoneWithABeagle said:
We have a winner... the next one who didn't pay any attention - i.e. reading the OP post of the ROM thread.
.
Click to expand...
Click to collapse
Speaking of not reading OPs and paying attention...I already said I realized that was the issue, and that I can't seem to get it to go into download mode, so that's likely paperweight land?

colema19 said:
Speaking of not reading OPs and paying attention...I already said I realized that was the issue, and that I can't seem to get it to go into download mode, so that's likely paperweight land?
Click to expand...
Click to collapse
If you're down to "can't get it into download mode anymore" (I start to assume the attempt to flash some 4.4.2 ROM through CWM 6.0.x.x may overwrite partitions it's not supposed to overwrite) the only way left to breathe life back into the tablet is to resort to JTAG (UART port connection, CASUAL restoration package, USB Jig to force the tablet into UART mode).
If you search on XDA you will discover tons of threads by AdamOutler dealing with that topic, maybe that's useful to you in any way to figure out if that's an option for you.

Does it stay in CWM once it boots? If so you can copy a TWRP 2.7.0.x zip file to your SD card and install it from there.
Sent from my Nexus 4 using XDA Premium HD app

shakatu said:
Does it stay in CWM once it boots? If so you can copy a TWRP 2.7.0.x zip file to your SD card and install it from there.
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
I'll keewp looking, but if you have a location I can get a flashable zip that will work for this, that'd be very helpful!
Thanks

Found a flash, flashed TWRP and got CM11 on it and working.
Thanks!

[How-To] Update to G900V_OA8 - 5.0 and KeepRoot (2/3/2015)

**You can begin the following process from any build/ROM but you must have both root and Safestrap installed before proceeding**
1. Place the G900V_OA8_100%_Stock_Rooted_ROM onto your ext-sdcard.
2. From Safestrap recovery press "Wipe" then "Advanced Wipe" and wipe everything but your ext-sdcard.
3. From the main menu press "Install," then select and install the G900V_OA8_100%_Stock_Rooted_ROM.
4. Once complete, from the main menu press "Reboot," then "System." Done!
After following the above process your phone will pause on the Verizon splash screen for about 2 minutes before rebooting.
Caution! Users are reporting issues after using TitaniumBackup to delete or freeze unwanted apps, e.g. rotation stops working. Additionally, users have reported that their device runs hotter with severe battery drain after updating to 5.0. The problem seems to stem from the SHealth pedometer, heart rate monitor, and Facebook Messenger running in the background. Consider disabling these items and rebooting to resolve the issue (Verizon Community Forum: https://community.verizonwireless.com/thread/851032?start=0&tstart=0).
Optional - Enable Native Tethering AddOn:
1. Place the G900V_OA8_TetherAddOn.zip onto your external sd-card.
2. Flash back the G900V_NK2_Stock_Kernel in order to access the Safestrap recovery splashscreen.
3. Flash the file using "Stock" Slot but do not wipe!
4. Last , press "Home", then reboot into Download Mode and re-flash the G900V_OA8_Stock_Kernel. Done!
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. This process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OA8 (BusyBox is also pre-installed).
3. Safestrap will no longer function after updating to OA8 5.0. However you can access Safestrap recovery on 5.0 by flashing back the G900V_NK2_Stock_Kernel (reflash the G900V_OA8_Stock_Kernel once you are done using Safestrap).
4. If you do not already have root access you must first flash the G900VVRU1ANCG_Full_Odin.tar (flash in Odin's PDA slot(AP in Odin v3.09+)), root with Towelroot (this version does not require internet access), install Safestrap, then proceed with the above process.

muniz_ri said:
**You can Odin back to NK2 at anytime after updating to OA8 5.0**
1. Place the G900V_OA8_100%_Stock_Rooted_ROM onto your ext-sdcard.
2. Use Safestrap's "Backup" function to backup your User Data.
3. Next, press "Home" and perform an "Advanced Wipe" and wipe everything but your ext-sdcard.
4. Flash the ROM using the "Stock Slot."
5. Once complete press "Home" then "Restore" and restore User Data.
6. Last, press "Reboot" and reboot into "Download Mode" and flash the G900V_OA8_Stock_Kernel in Odin's PDA slot(AP in Odin v3.09+). Done!
The phone will pause on the Verizon splash screen for about 2 minutes after following the above process before completing booting.
Notes:
1. The above process will not affect your User Data or Knox Warranty Flag.
2. This Custom ROM process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OA8.
3. Safestrap will no longer function after updating to OA8 5.0.
4. When flashing the kernel the most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Click to expand...
Click to collapse
Thank you very much for doing this!!!! I can upgrade straight to OA8 from NK2 (stock root)? Im in process of downloading the stock rom files now... Just a quick reminder on how to apply in 0din would be great. And also havent used SS yet ;/

Thanks for saving me from having to figure this out!
Upgraded and kept root. Wish I had safestrap, but oh well--I suppose in the scheme of things it's fortunate that there's even still root. Yes, "fortunate" ...
Best regards.

Thanks for the guide! I was already updated to OA8, but I just flashed a stock nk2 tar (didn't have an nk2 backup) then followed the ncg root method, went back to nk2, installed safestrap, and then followed your guide.

awesome thread.. i lold at ppl saying we wouldnt have root.. only downgrade is that if already on L you have to go back to a ss compatible rom to upgrade again.. i will be working on Extreme Syndicate when I get home! It will also be deodexed if all goes well
Sent from my SM-G900V using XDA Free mobile app
---------- Post added at 06:14 AM ---------- Previous post was at 06:09 AM ----------
elliwigy said:
awesome thread.. i lold at ppl saying we wouldnt have root.. only downgrade is that if already on L you have to go back to a ss compatible rom to upgrade again.. i will be working on Extreme Syndicate when I get home! It will also be deodexed if all goes well
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
speaking of, you mind if i use your roofed oa8 as a base? of course i will give proper creds!
Sent from my SM-G900V using XDA Free mobile app

elliwigy said:
awesome thread.. i lold at ppl saying we wouldnt have root.. only downgrade is that if already on L you have to go back to a ss compatible rom to upgrade again.. i will be working on Extreme Syndicate when I get home! It will also be deodexed if all goes well
Sent from my SM-G900V using XDA Free mobile app
---------- Post added at 06:14 AM ---------- Previous post was at 06:09 AM ----------
speaking of, you mind if i use your roofed oa8 as a base? of course i will give proper creds!
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
elliwigy are going to make a custom 5.0 ROM? Or update Syndicate? Wasn't sure what you meant but I'm waiting for a good ROM to come out for 5.0. Hopefully eclipse ROM gets updated

elliwigy said:
awesome thread.. i lold at ppl saying we wouldnt have root.. only downgrade is that if already on L you have to go back to a ss compatible rom to upgrade again.. i will be working on Extreme Syndicate when I get home! It will also be deodexed if all goes well
Sent from my SM-G900V using XDA Free mobile app
---------- Post added at 06:14 AM ---------- Previous post was at 06:09 AM ----------
speaking of, you mind if i use your roofed oa8 as a base? of course i will give proper creds!
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
No worries. Look forward to your ROM.

Can't wait to get home from work and try this out. So if I understand this right you can be on any rom base with root busybox and safe strap and this method will update you right? Or do you need to be on NK2 first?
Just finished the video I made on this process please check it out.
http://youtu.be/WUDIOVas81U

Tomsgt said:
Can't wait to get home from work and try this out. So if I understand this right you can be on any rom base with root busybox and safe strap and this method will update you right? Or do you need to be on NK2 first?
Click to expand...
Click to collapse
You can flash the ROM from any base. The process will update all partitions to OA8. Although someone just reported that their baseband remained at NK2 after flashing the ROM. Let me know if anyone else experiences that issue and I will check it out.

downloading it and the stock NK2 tar so I can go through the upgrade (I'm running Rick's ROM on NI2 currently, and pretty sure I need to ODIN back to stock first)
will report back

muniz_ri said:
You can flash the ROM from any base. The process will update all partitions to OA8. Although someone just reported that their baseband remained at NK2 after flashing the ROM. Let me know if anyone else experiences that issue and I will check it out.
Click to expand...
Click to collapse
Thanks I am planning on making a video on this process as soon as I can. Probably later tonight. I want to fully understand before I start. I will be interested to see more info about the baseband also. Awesome work by the way. I didnt think that lollipop would get root this quick and since it is downgradable anyone can root which is awesome.

Tomsgt said:
Thanks I am planning on making a video on this process as soon as I can. Probably later tonight. I want to fully understand before I start. I will be interested to see more info about the baseband also. Awesome work by the way. I didnt think that lollipop would get root this quick and since it is downgradable anyone can root which is awesome.
Click to expand...
Click to collapse
Yes, you guys were lucky the qfuse counter remained the same as previous firmware. I hope that ATT is as kind to us but doubt it.

Just a note that both of the download files say:
for the Samsung Galaxy S4, by muniz_ri
Click to expand...
Click to collapse
when you go to download them. The S4 thing is somewhat confusing...

Good Morning,
I understand the whole process and have all the files ready to go. Could some please inform me if I need ODIN to flash the Kernel, or can I use Safestrap to flash, can I flash the update and boot as normal and flash the kernel later? I ask because I do not have access to a computer and it looks like a long day here at the hospital.

muniz_ri said:
You can flash the ROM from any base. The process will update all partitions to OA8. Although someone just reported that their baseband remained at NK2 after flashing the ROM. Let me know if anyone else experiences that issue and I will check it out.
Click to expand...
Click to collapse
I am starting over from scratch and will let you know if the mismatch is still present.

kgoroway said:
Just a note that both of the download files say:
when you go to download them. The S4 thing is somewhat confusing...
Click to expand...
Click to collapse
Thanks but I think we are OK. I support many devices and variants and my file naming convention seems to be clear enough for most.

Does anyone know if I do a factory reset while on the ROOTED lollipop......will I keep root or will it be lost? Just curious....
Sent from my SM-G900V using XDA Premium 4 mobile app

So then does anyone know definitively if Xposed will be available for 5.0?
Sent from my SM-G900V using XDA Free mobile app

Jeff Speake said:
I am starting over from scratch and will let you know if the mismatch is still present.
Click to expand...
Click to collapse
Immediately after flashing the ROM in safestrap can you go to "Advanced" then press "copy log to sd" and send me the .txt file? Thx.

muniz_ri said:
**You can Odin back to NK2 at anytime after updating to OA8 5.0**
1. Place the G900V_OA8_100%_Stock_Rooted_ROM onto your ext-sdcard.
2. Use Safestrap's "Backup" function to backup your User Data.
3. Next, press "Home" and perform an "Advanced Wipe" and wipe everything but your ext-sdcard.
4. Flash the ROM using the "Stock Slot."
5. Once complete press "Home" then "Restore" and restore User Data.
6. Last, press "Reboot" and reboot into "Download Mode" and flash the G900V_OA8_Stock_Kernel in Odin's PDA slot(AP in Odin v3.09+). Done!
The phone will pause on the Verizon splash screen for about 2 minutes after following the above process before completing booting.
Notes:
1. The above process will not affect your User Data or Knox Warranty Flag.
2. This Custom ROM process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OA8.
3. Safestrap will no longer function after updating to OA8 5.0.
4. When flashing the kernel the most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Click to expand...
Click to collapse
I echo the earlier questions. Is there a way to do this process without access to a PC? I am currently on NI2 with full root and want to get to 5.0 hopefully still with root. The only computer I have is my work computer which will not allow me to install ODIN or Kies since I am not an administrator. Any help would be greatly appreciated and thank you all for your hard work on all of this stuff.

DISCONTINUED [VZW_Stock Based TW Rom][5.0 Lollipop BOD5 Build Deodexed]

Stock Verizon 5.0 BOD5 Based Lollipop Rom
Features
Rooted/Busybox/Init.d
Deodexed
Fixed Tethering
Fixed Private Mode
Added SBrowser
SD Card Fix
Download
VZW_BOD5_STOCK_ROM_6_22_15.zip

Extras-Addons​
Odin Tar Packages
Here is the BOD5 Full Factory Restore Tar
VZW-G900VVRU1BOD5-20150616161519.zip
Here is the the BOD5 Firmware with bootloaders modem and recovery
VZW_BOD5_RETAIL_FIRMWARE_ONLY.tar.md5
Here is the BOD5 Kernel Only
VZW_BOD5_RETAIL_KERNEL_ONLY.tar.md5
Rooting Tools SafeStrap Without Using Odin
Rooting_tools_for_sdcard_BOD5.zip
Debloat Zip
New One Coming Soon!

Themes​

Happy
I can't wait to try your new rom YES I love your work alot
Edit: It's 01:55 am And it loaded just fine. Looking forward to your theming it out shortly I love your Mod control app

Wow you are just amazing. It is great to have a device you are developing for. Thank you

jrkruse said:
Extras-Addons​
Odin Tar Packages
Here is the BOD5 Full Factory Restore Tar
VZW-G900VVRU1BOD5-20150616161519.zip
Here is the the BOD5 Firmware with bootloaders modem and recovery
VZW_BOD5_RETAIL_FIRMWARE_ONLY.tar.md5
Here is the BOD5 Kernel Only
VZW_BOD5_RETAIL_KERNEL_ONLY.tar.md5
Rooting Tools SafeStrap Without Using Odin
Rooting_tools_for_sdcard_BOD5.zip
Debloat Zip
New One Coming Soon!
Click to expand...
Click to collapse
I take it none of these are flashable zips yet can't wait to see if it's converted to moar. with the same mods ty @jrkruse
Sent from my SM-G900V using Tapatalk
---------- Post added at 01:18 PM ---------- Previous post was at 01:15 PM ----------
sean19661 said:
I take it none of these are flashable zips yet can't wait to see if it's converted to moar. with the same mods ty @jrkruse
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Sorry didn't see the zip above my bad
Sent from my SM-G900V using Tapatalk

@jrkruse what will be the difference between your new debloat zip and the previous ones?
Sent from my SM-G900V using XDA Free mobile app

killa408shark said:
@jrkruse what will be the difference between your new debloat zip and the previous ones?
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Just a ton more Verizon crap to get rid of. And I do mean a bunch! Im just trying to see what can be safely removed

There's way more bloat in od5 than oc4. It wasn't just the finger print fix they added.
Sent from my SM-G900V using Tapatalk

What exactly is rooting tools for sd card?
I'm on NK2, going to try and flash this in SS then Odin the fw with bootloaders and recovery. We shall see

joe3681 said:
What exactly is rooting tools for sd card?
I'm on NK2, going to try and flash this in SS then Odin the fw with bootloaders and recovery. We shall see
Click to expand...
Click to collapse
Rooting tools just puts everything on your sd card that you may need if you have to start all over. TR root BusyBox And SuperSu And Safstrap. It also install SafeStrap And the SafeStrap without odin apk on your current rom. Just click on Safestrap Icon grant SuperSu access and make sure Safestrap is installed . Then click on the SafeStrap Reboot app and click flash grant SuperUser access when prompted. Then click on the reboot to safestrap box. The phone will reboot toSafeStrap without having to use odin to flash a kitkat kernel. Then you can flash your rom. Then after you flash your rom you will need to flash the Lollipop Stock kernel zip located on your External SD card and Internal SD in a folder called .1Stock_Kernel_Zip it should be the first folder at the top of the list. Install the zip that matches your firmware. Then click reboot system. No need to use odin. The above process is if your on a Lollipop Rom already. If on a kitkat rom you will need to reboot to safestrap flash rom then reboot to download mode and flash firmware

SafeStrap app in the S5 root folder says it installs. Tap reboot to recovery button just reboots. What is "SafeStrap Reboot app"? This isn't making much sense here at all

Alright so, I'm a bit new at this part since I JUST got my phone rooted finally. What the difference between this and your BOC4?

Just flashed this last night coming from kk clean flash I didn't have time to play with it till this morning I noticed don't have the video call option anyone else having this.? I have it activated since this option was available for our phone
Sent from my SM-G900V using XDA Free mobile app

killa408shark said:
Just flashed this last night coming from kk clean flash I didn't have time to play with it till this morning I noticed don't have the video call option anyone else having this.? I have it activated since this option was available for our phone
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Edit: just try activating it first in the settings advanced calling features before doing below steps
Ok this happened to me also. The only way I got it to work was this. I put the BOD5 full factory image on my internal sd card and used flashfire and flashed the system image and the cache image and the boot image added a wipe to wipe data injected root. I also had it flash the SuperSU zip 2.49 just incase the inject root didnt work Once the rom installed I activated video calling it then worked. Then I used flashfire again did a full wipe and flashed this rom and its worked ever since. I think there must be something in the cache image that triggers it and once its triggerd its fine. There might be a better way but I cant get it to do it again so I even odin back to NCG firmware and started over and when I flashed BOD5 rom and firmware video calling worked right out of the hat. Maybe dirty flashing over BOC4 then making sure video calling works then reinstalling with a full wipe might also work

joe3681 said:
SafeStrap app in the S5 root folder says it installs. Tap reboot to recovery button just reboots. What is "SafeStrap Reboot app"? This isn't making much sense here at all
Click to expand...
Click to collapse
You have to use the SafeStrap Reboot app to reboot to SafeStrap not the SafeStrap App. The SafeStrap Reboot App Actually flashes the NI2 kernel without using odin. Then if you installed the rooting tools for sd BOD5 zip you will have a folder on your sd card named 1.Stock_Kernel_Zip it should be the very first folder in the list. Inside that folder is the Stock kernel you will need to flash in safestrap to reboot back to rom. Just flash the Stock_Kernel_Zip and then click reboot now or reboot system from safestrap.

Exmix said:
Alright so, I'm a bit new at this part since I JUST got my phone rooted finally. What the difference between this and your BOC4?
Click to expand...
Click to collapse
I didnt think there was alot at first but after looking through it there are alot of changes especially in the Video Calling And HD calling framework. I think Verizon must be getting ready to add calling over wifi because there is some of that framework in there as well

jrkruse said:
Edit: just try activating it first in the settings advanced calling features before doing below steps
Ok this happened to me also. The only way I got it to work was this. I put the BOD5 full factory image on my internal sd card and used flashfire and flashed the system image and the cache image and the boot image added a wipe to wipe data injected root. I also had it flash the SuperSU zip 2.49 just incase the inject root didnt work Once the rom installed I activated video calling it then worked. Then I used flashfire again did a full wipe and flashed this rom and its worked ever since. I think there must be something in the cache image that triggers it and once its triggerd its fine. There might be a better way but I cant get it to do it again so I even odin back to NCG firmware and started over and when I flashed BOD5 rom and firmware video calling worked right out of the hat. Maybe dirty flashing over BOC4 then making sure video calling works then reinstalling with a full wipe might also work
Click to expand...
Click to collapse
would you create a file folder in the OP so that we can be able to do this step by step please? PS I am using SS not flashfire so if you would include this options in this matter too that would really be great.
Thanks in advance:good:

jrkruse said:
I didnt think there was alot at first but after looking through it there are alot of changes especially in the Video Calling And HD calling framework. I think Verizon must be getting ready to add calling over wifi because there is some of that framework in there as well
Click to expand...
Click to collapse
So would you suggest this once over the BOC4?
I think so too, most of my friends have the S5 as well and I know one is through T-Mobile and they haver Wifi Calling.5

ProudMarine said:
would you create a file folder in the OP so that we can be able to do this step by step please? PS I am using SS not flashfire so if you would include this options in this matter too that would really be great.
Thanks in advance:good:
Click to expand...
Click to collapse
You cant flash a firmware file with safestrap only flashfire