Related
Good day everyone,
Thanks for taking the time to read this. I am in desperate need of your help. I recently purchased a HTC One S from an online store they told me it was new never used locked phone. Turns out phone was rooted, 4g does not work, and it could not recognize e drive, (internal sd card)
After reading the all in one i re-rooted it and install the teamwin version of recovery.
Now i never had any back ups or any factory files. as i got the phone rooted with software that did not work. My phone now has no rom and i cannot install from adb sideloader, or an other means. I am new to this and cannot seem to figure out how to get my phone back to even stock un-rooted etc. I tried multiple forums and download links but nothing.
i was able to install vipers rom at one point but despite several attempts to reinstall. recovery does not see files loaded. which i can see on my mac or pc.
the other strange thing i notice is that at the top in fastboot mode i sometimes see unlocked in pink only and other times i see both unlocked and tampered. when its unlock only none of my computers recognize connection.
I also tried boot.img for flash. The furthest my screen no goes is the htc logo, then goes black.
Please help, even to just point me in rite direction to have this resolved.
the boot.img, did you flash it via fastboot? (fastboot flash boot boot.img)
And, one question that comes to mind... they sold you a device as new, yet it wasnt.. Why didnt you return it?
Goatshocker said:
the boot.img, did you flash it via fastboot? (fastboot flash boot boot.img)
And, one question that comes to mind... they sold you a device as new, yet it wasnt.. Why didnt you return it?
Click to expand...
Click to collapse
Yes I tried several times loading the boot.img via fastboot.
As far as returning the device i trashed the mailing box but kept original packaging so no return address. I called the company which i made the purchase from "N1wireless" several times and sent several emails to them. They have yet to reply or answer any of my calls. Which is why I am so frustrated.
mnitllc said:
Yes I tried several times loading the boot.img via fastboot.
As far as returning the device i trashed the mailing box but kept original packaging so no return address. I called the company which i made the purchase from "N1wireless" several times and sent several emails to them. They have yet to reply or answer any of my calls. Which is why I am so frustrated.
Click to expand...
Click to collapse
Boot into recovery, select mount > mount usb storage. From pc move the Rom.zip to your sd card which should now be showing on your pc. After it is moved to your phone select unmount then press home button in twrp recovery. Then install the Rom. After install open up adb and type adb reboot bootloader then press enter. Now fastboot flash the boot img from inside the Rom.zip on your computer. After that reboot your phone and report back
Sent from my HTC One S using xda premium
bochocinco23 said:
Boot into recovery, select mount > mount usb storage. From pc move the Rom.zip to your sd card which should now be showing on your pc. After it is moved to your phone select unmount then press home button in twrp recovery. Then install the Rom. After install open up adb and type adb reboot bootloader then press enter. Now fastboot flash the boot img from inside the Rom.zip on your computer. After that reboot your phone and report back
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Hi, thanks for the reply, thats just the thing I cannot in recovery install any rom loaded to sd card. It fails. I tried reinstalling the recovery and it still not reading my sd card.
So my guess is i need a new twrc or how to do it from my mac, as now when i try on my pc it is failing as-well. Once I get the recovery to work I will try your other suggestions as I think it will work based on the steps you mentioned.
I am trying to figure out how to use terminal to reinstall recovery. any suggestions or links will be greatly appreciated.:good:
you install recoveries through fastboot, fastboot flash recovery recovery.img
Goatshocker said:
you install recoveries through fastboot, fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I reinstalled recovery several times now and it wont recognize the sd card. is there another recovery i can download and use? Also is there any instructions for a newby to use terminal to re-boot, everything from scratch. Meaning if the phone is completely blank except the fast boot and a recovery manager no backups or stock kernel etc. what is the format to be used in order for the computer and recovery to recognize the sd card?
I think I need a good recovery rom like cmod if there is one for the htc one s or the stock one if someone has it.
hi i had that problem
mnitllc said:
I reinstalled recovery several times now and it wont recognize the sd card. is there another recovery i can download and use? Also is there any instructions for a newby to use terminal to re-boot, everything from scratch. Meaning if the phone is completely blank except the fast boot and a recovery manager no backups or stock kernel etc. what is the format to be used in order for the computer and recovery to recognize the sd card?
I think I need a good recovery rom like cmod if there is one for the htc one s or the stock one if someone has it.
Click to expand...
Click to collapse
I had that problem the sd card would not be seen by my laptop and the phone would not boot at all if you plug in the phone to your go to start and then computer right click on your c drive go to manage and see if you can see it there if so try to format it and then reboot the phone if it works you can then install cwm as a recovery system then you can put what rom you wont on it i am use in zenRom 1.05 and to me its the best coz it like the htc rom that the phone come with if that don`t work let me know coz i have more tricks to try i hope this helps you out.
Theres only TWRP and CWM for the S afaik, and CWM sucks. TWRP is the one to use.
I had a similar problem a few days ago, luckily there's not such a bad solution.
1) Pick a custom ROM you want to install from the HTC One S developer forums (I went with Trickdroid) and download the ROM/boot image.
2) Then download and flash the stock recovery here: http://www.4shared.com/file/1UuxTh0k/stock_recovery.html
3) Boot into bootloader, clear storage and then reset to factory defaults.
4) Flash TWRP
5) Reboot into recovery, sdcard should now be mounted/visible
Then push the ROM to your sdcard with adb or mount USB storage and flash it/flash the boot image and you should be sorted.
Edit: Here's where I got the solution from btw (post #8):
http://forum.xda-developers.com/showthread.php?t=1630459
Hope that helped!
violentlighting said:
I had a similar problem a few days ago, luckily there's not such a bad solution.
1) Pick a custom ROM you want to install from the HTC One S developer forums (I went with Trickdroid) and download the ROM/boot image.
2) Then download and flash the stock recovery here: http://www.4shared.com/file/1UuxTh0k/stock_recovery.html
3) Boot into bootloader, clear storage and then reset to factory defaults.
4) Flash TWRP
5) Reboot into recovery, sdcard should now be mounted/visible
Then push the ROM to your sdcard with adb or mount USB storage and flash it/flash the boot image and you should be sorted.
Edit: Here's where I got the solution from btw (post #8):
http://forum.xda-developers.com/showthread.php?t=1630459
Hope that helped!
Click to expand...
Click to collapse
got it. will try it asap.
I could not get the stock recovery via that link you provided. If there is another link to the stock I would appreciate it. I had to flash it wit cwm twice then reflash with twrc to get it to identify the sd card. i had tried the viper rom but my 4g and wifi doesnt work. Will try trickmod hopefully that works with no more issues
violentlighting said:
I had a similar problem a few days ago, luckily there's not such a bad solution.
1) Pick a custom ROM you want to install from the HTC One S developer forums (I went with Trickdroid) and download the ROM/boot image.
2) Then download and flash the stock recovery here: http://www.4shared.com/file/1UuxTh0k/stock_recovery.html
3) Boot into bootloader, clear storage and then reset to factory defaults.
4) Flash TWRP
5) Reboot into recovery, sdcard should now be mounted/visible
Then push the ROM to your sdcard with adb or mount USB storage and flash it/flash the boot image and you should be sorted.
Edit: Here's where I got the solution from btw (post #8):
http://forum.xda-developers.com/showthread.php?t=1630459
Hope that helped!
Click to expand...
Click to collapse
Hey thanks allot for your suggestions. I made some progress. It kinda worked. However I my wifi and data connections no good. I tried the 9.1 update and then tried the tweaks.
Do you know if it is possible to get stock kernel and stock rome to undo changes on device?
My buddy is having a hard time flashing a new ROM on his tablet. Currently he's running Cyanogen with TWRP.
Apparently TWRP formatted his tablet randomly and he hasn't been able to install a new ROM because his tablet won't mount the system or cache. It keeps failing. Neither system or cache are selectable to mount and it says "E: unable to mount '/system' "
And ADB isn't pushing anything.
Any thoughts why?
Sunset Rider said:
My buddy is having a hard time flashing a new ROM on his tablet. Currently he's running Cyanogen with TWRP.
Apparently TWRP formatted his tablet randomly and he hasn't been able to install a new ROM because his tablet won't mount the system or cache. It keeps failing. Neither system or cache are selectable to mount and it says "E: unable to mount '/system' "
And ADB isn't pushing anything.
Any thoughts why?
Click to expand...
Click to collapse
TWRP formatted his tablet randomly??? Never heard of such a thing!
And we need more information:
What versions of bootloader, CM, TWRP and you are trying to push what in ADB?
Do you have access to fastboot? What rom are you trying to flash?
What did he do - as best as he can remember?
berndblb said:
TWRP formatted his tablet randomly??? Never heard of such a thing!
And we need more information:
What versions of bootloader, CM, TWRP and you are trying to push what in ADB?
Do you have access to fastboot? What rom are you trying to flash?
What did he do - as best as he can remember?
Click to expand...
Click to collapse
It wiped his data when he went to decrypt data and it asked for a password. He hit cancel and it said system memory 0gb
He has the newest twrp, he was on 10.2 trying to go to 11, and he was trying to push the mounting through adb and was getting errors. Because he is unable to select them In twrp
He has fastboot but it doesn't respond to commands at all.
Thank you for any help
fastboot
Sunset Rider said:
It wiped his data when he went to decrypt data and it asked for a password. He hit cancel and it said system memory 0gb
He has the newest twrp, he was on 10.2 trying to go to 11, and he was trying to push the mounting through adb and was getting errors. Because he is unable to select them In twrp
He has fastboot but it doesn't respond to commands at all.
Thank you for any help
Click to expand...
Click to collapse
Sounds like a soft brick.. Due to a wrong recovery flash or he flashed the newest version of twrp, and did a full data wipe.. It has known issues!!!!!
Becareful from here.. Like berndblb said we need verify we still have fastboot access!!:fingers-crossed:
What is the OS of the PC your using to fastboot from??
Well I tried installing cromi for him and it stalls at 87%
Sunset Rider said:
Well I tried installing cromi for him and it stalls at 87%
Click to expand...
Click to collapse
UPDATE: We restarted the tablet, mid installation because it froze, and it booted up to his old 10.2 just fine. I recommended he do a clean format now but he doesn't want to do anything lol.
So right now I'm just thanking God he didn't brick it hard
Sunset Rider said:
It wiped his data when he went to decrypt data and it asked for a password. He hit cancel and it said system memory 0gb
Click to expand...
Click to collapse
Did he have the tablet encrypted or did the request for a decryption password just show up unexpectedly? If it's the latter - I have read about this a number of times - unfortunately still cannot make rhyme or reason out of it, but I suspect it's a corrupted recovery....
He has the newest twrp, he was on 10.2 trying to go to 11, and he was trying to push the mounting through adb and was getting errors. Because he is unable to select them In twrp
Click to expand...
Click to collapse
The newest meaning 2.6.3.2?
He has fastboot but it doesn't respond to commands at all.
Thank you for any help
Click to expand...
Click to collapse
Which probably means he doesn't have the correct fastboot drivers installed. That would No. 1: Get fastboot working. Download the Google Universal Naked drivers, install them and try
Code:
fastboot devices
If that returns the tablet's serial number, you're in business. You could then flash CWM 6.0.4.6 in fastboot. I would probably wipe data (hope he has everything backed up) and flash the rom.
---------- Post added at 10:18 PM ---------- Previous post was at 10:10 PM ----------
lj50036 said:
Sounds like a soft brick.. Due to a wrong recovery flash or he flashed the newest version of twrp, and did a full data wipe.. It has known issues!!!!!
Becareful from here.. Like berndblb said we need verify we still have fastboot access!!:fingers-crossed:
What is the OS of the PC your using to fastboot from??
Click to expand...
Click to collapse
@lj50036 could you elaborate on the issues of TWRP 2.6.3.2.? sbdags included it it in his bootloader/TWRP flash package for CROMi-X and one guy just softbricked flashing CROMi_X after flashing that package, he seems to have done everything else correctly and I suspect the recovery is buggy???
TWRP
could you elaborate on the issues of TWRP 2.6.3.2.? sbdags included it it in his bootloader/TWRP flash package for CROMi-X and one guy just softbricked flashing CROMi_X after flashing that package, he seems to have done everything else correctly and I suspect the recovery is buggy???
Click to expand...
Click to collapse
My issues are first hand.. It flashes just fine, everything seems to function correctly.. It's only the wiping of data that has a issue.... It just hangs says its doing it thing but nothing ever happens..After a hard reboot TWRP now asking for password will not mount any storage of any kind... The fastest way to a soft brick.... I posted on the TWRP forum, about the issue... Maybe we need a new forum letting people know about the issue, so we dont end up with a riot!!!
lj50036 said:
My issues are first hand.. It flashes just fine, everything seems to function correctly.. It's only the wiping of data that has a issue.... It just hangs says its doing it thing but nothing ever happens..After a hard reboot TWRP now asking for password will not mount any storage of any kind... The fastest way to a soft brick.... I posted on the TWRP forum, about the issue... Maybe we need a new forum letting people know about the issue, so we dont end up with a riot!!!
Click to expand...
Click to collapse
Thanks! Though I would love to see what a riot on XDA looks like LOL
berndblb said:
Did he have the tablet encrypted or did the request for a decryption password just show up unexpectedly? If it's the latter - I have read about this a number of times - unfortunately still cannot make rhyme or reason out of it, but I suspect it's a corrupted recovery....
The newest meaning 2.6.3.2?
Which probably means he doesn't have the correct fastboot drivers installed. That would No. 1: Get fastboot working. Download the Google Universal Naked drivers, install them and try
Code:
fastboot devices
If that returns the tablet's serial number, you're in business. You could then flash CWM 6.0.4.6 in fastboot. I would probably wipe data (hope he has everything backed up) and flash the rom.
---------- Post added at 10:18 PM ---------- Previous post was at 10:10 PM ----------
@lj50036 could you elaborate on the issues of TWRP 2.6.3.2.? sbdags included it it in his bootloader/TWRP flash package for CROMi-X and one guy just softbricked flashing CROMi_X after flashing that package, he seems to have done everything else correctly and I suspect the recovery is buggy???
Click to expand...
Click to collapse
It was version 2.6.3.0.
He had no decrypted files he was just seeing what it did when he hit decrypt data. I asked for a password which he obviously never set and hit cancel. And it said he had nothing in internal storage.
However, after the install froze on an older Cromi version I put on his sd card (from my 700t), we held down the power button and rebooted. It booted up fine to his previous Cyanogen 10.2. WITH all of his internal storage still there, EVEN THOUGH, he did a format from TWRP already.
So it's definitely a problem with TWRP. His tablet is back to the way it was before the fiasco and he is afraid to do anything else.
Sunset Rider said:
It was version 2.6.3.0.
He had no decrypted files he was just seeing what it did when he hit decrypt data. I asked for a password which he obviously never set and hit cancel. And it said he had nothing in internal storage.
However, after the install froze on an older Cromi version I put on his sd card (from my 700t), we held down the power button and rebooted. It booted up fine to his previous Cyanogen 10.2. WITH all of his internal storage still there, EVEN THOUGH, he did a format from TWRP already.
So it's definitely a problem with TWRP. His tablet is back to the way it was before the fiasco and he is afraid to do anything else.
Click to expand...
Click to collapse
Are you sure about this???
Because TWRP 2.6.3.0 was too big for the recovery partition of the TF700 and never properly installed????
For any reliable advice you need to provide the bootloader version (which you still haven't given us) and if you have a working system, you should be able to boot into recovery and give us it's version number.
For installing CM 11 on the TF700 you need to be on the 10.6.1.14.10 bootloader and have the CWM 6.0.4.6 recovery.
TWRP 2.6.3.2 supposedly works with CM 11, but I would not trust it - read about too many problems with it....
And anyway - in terms of performance, neither CM 10.2 or CM 11 beats CROMi-X on this tablet - period.
Here I am
berndblb said:
Are you sure about this???
Because TWRP 2.6.3.0 was too big for the recovery partition of the TF700 and never properly installed????
For any reliable advice you need to provide the bootloader version (which you still haven't given us) and if you have a working system, you should be able to boot into recovery and give us it's version number.
For installing CM 11 on the TF700 you need to be on the 10.6.1.14.10 bootloader and have the CWM 6.0.4.6 recovery.
TWRP 2.6.3.2 supposedly works with CM 11, but I would not trust it - read about too many problems with it....
And anyway - in terms of performance, neither CM 10.2 or CM 11 beats CROMi-X on this tablet - period.
Click to expand...
Click to collapse
Hey guys, this is Wade, the cause of the whole fiasco.
It was the newest TWRP 2.3.6.2, but I imagine it might've been a problem with the bootloader? I had no idea that the bootloader needed updating; I thought that once you could boot what you wanted, that was it, but obviously I'm mistaken. Where do I find the bootloader version? It was the latest posting to the Asus download site, or the V8, 2013 bootloader edition for JB. 4.2
Basically, I had tried several times that day installing CM11 and the gapps with CWM 6.0.3.1 (which ROM manager says is the up to date version? WTF?) to no avail. It kept giving me md5sum errors, and I couldn't find anything to easily fix that. CWM would also not respond to commands from ROM manager other than backups... If i told it to bootload and flash, it would just reboot normally... ADB also would fail, despite saying that i COULD connect to fastboot.
So i read on the actual CM forum that the newest TWRP 2.6.3.2 would do the trick as well, and tried that. But ya, once i booted into twrp, it threw a password query at me. I never set a password, so I pressed cancel, and that's when the partition showed up as blank.
I went to reboot, but it warned that I had no OS installed. That's about when I freaked out. It would see my microSD fine, but wasn't able to talk to /system to actually flash anything, and ADB would just give "error:closed" if I tried any mount commands there.
So ya, I invited my buddy over, and he recommended we try flashing an old CROMI-X, and it WORKED! sort of. It started to flash, even though a previous CM 10.2 and it's gapps (which I was already running and knew worked) wouldn't!
Then it froze installing Youtube, and after ten mins we held down the power.
And it booted back into CM 10.2 like nothing had happened.
Even though TWRP said I had succesfully factory reset AND wiped AND formatted the internal by that point. Lies!
So ya, I imagine it's a combination of pilot error, and TWRP being a little fluky. My question - where did that 87% CROMI-X flash go, and how can I get rid of it? And i reflashed CWM 6.0.3.1, but I'm still wary of going into the bootloader, just in case bastard TWRP is still lurkin
UPDATE
Wadesauce said:
I had no idea that the bootloader needed updating; I thought that once you could boot what you wanted, that was it, but obviously I'm mistaken. Where do I find the bootloader version? It was the latest posting to the Asus download site, or the V8, 2013 bootloader edition for JB. 4.2
Click to expand...
Click to collapse
So it was definitely the old ASUS 4.2 bootloader I was using. I had no idea that dasunsrule32 wanted us to use his April 2013 bootloader for 10.2 as well, the site that told me how to put CM 10.2 on my tab said to use the old ASUS one.
Finally manned up and tried my first soft reboot, and it brought up the ASUS menu with the blue loading bar - it seemed like it wanted to go into bootloader. Then it went blank and the regular ASUS logo showed, and then the CM logo and booted. So i didn't walk away from this unscathed; something low-down got messed with...
Can I update the bootloader to his, despite the problems ive been having? How do I do that?
And why does ROM manager only offer 6.0.3.1??
And since CM11 is based on 4.4, wont it eventually be better than CROMi-X?
Wadesauce said:
So it was definitely the old ASUS 4.2 bootloader I was using. I had no idea that dasunsrule32 wanted us to use his April 2013 bootloader for 10.2 as well, the site that told me how to put CM 10.2 on my tab said to use the old ASUS one.
So can I update the bootloader to his, despite the problems ive been having? How do I do that?
And why does ROM manager only offer 6.0.3.1??
And since CM11 is based on 4.4, wont it eventually be better than CROMi-X?
Click to expand...
Click to collapse
Can you still boot into fastboot mode on your tablet and can your PC see the tablet in fastboot mode?? What is the OS on your PC??
i dunno
lj50036 said:
Can you still boot into fastboot mode on your tablet and can your PC see the tablet in fastboot mode?? What is the OS on your PC??
Click to expand...
Click to collapse
I haven't tried booting into bootloader, or even a full power down/power up yet. This is the device I use for school and right now would be a pretty sh**y time for anything serious to happen to it.
I am mainly afraid that TWRP hasn't left yet, or that I won't be able to access the CWM that ROM manager says I just successfully reflashed.
I don't really want to plug it back into the computer until I know more about what happened to it. Is it likely that the CROMI that we tried flashing or the old TWRP will cause me problems? Remember that CROMI said it was 87% successful (had loaded kernel and system and all that jazz)
And I have 64 bit Win7, it should have appropriate drivers
Feedback
Wadesauce said:
I haven't tried booting into bootloader, or even a full power down/power up yet. This is the device I use for school and right now would be a pretty sh**y time for anything serious to happen to it.
I am mainly afraid that TWRP hasn't left yet, or that I won't be able to access the CWM that ROM manager says I just successfully reflashed.
I don't really want to plug it back into the computer until I know more about what happened to it. Is it likely that the CROMI that we tried flashing or the old TWRP will cause me problems? Remember that CROMI said it was 87% successful (had loaded kernel and system and all that jazz)
And I have 64 bit Win7, it should have appropriate drivers
Click to expand...
Click to collapse
Well you just let me know.. I will be here to help out if you would like it ....As always thx lj
Wadesauce said:
Hey guys, this is Wade, the cause of the whole fiasco.
It was the newest TWRP 2.3.6.2, but I imagine it might've been a problem with the bootloader? I had no idea that the bootloader needed updating; I thought that once you could boot what you wanted, that was it, but obviously I'm mistaken. Where do I find the bootloader version? It was the latest posting to the Asus download site, or the V8, 2013 bootloader edition for JB. 4.2
Basically, I had tried several times that day installing CM11 and the gapps with CWM 6.0.3.1 (which ROM manager says is the up to date version? WTF?) to no avail. It kept giving me md5sum errors, and I couldn't find anything to easily fix that. CWM would also not respond to commands from ROM manager other than backups... If i told it to bootload and flash, it would just reboot normally... ADB also would fail, despite saying that i COULD connect to fastboot.
So i read on the actual CM forum that the newest TWRP 2.6.3.2 would do the trick as well, and tried that. But ya, once i booted into twrp, it threw a password query at me. I never set a password, so I pressed cancel, and that's when the partition showed up as blank.
I went to reboot, but it warned that I had no OS installed. That's about when I freaked out. It would see my microSD fine, but wasn't able to talk to /system to actually flash anything, and ADB would just give "error:closed" if I tried any mount commands there.
So ya, I invited my buddy over, and he recommended we try flashing an old CROMI-X, and it WORKED! sort of. It started to flash, even though a previous CM 10.2 and it's gapps (which I was already running and knew worked) wouldn't!
Then it froze installing Youtube, and after ten mins we held down the power.
And it booted back into CM 10.2 like nothing had happened.
Even though TWRP said I had succesfully factory reset AND wiped AND formatted the internal by that point. Lies!
So ya, I imagine it's a combination of pilot error, and TWRP being a little fluky. My question - where did that 87% CROMI-X flash go, and how can I get rid of it? And i reflashed CWM 6.0.3.1, but I'm still wary of going into the bootloader, just in case bastard TWRP is still lurkin
Click to expand...
Click to collapse
Jeez - where to start?
First of all: Do yourself a favor and ditch ROM Manager. It does not work well with the TF700 and several people have hard bricked using it. You have been very lucky so far!
Second: Do not flash anything until you are 150% sure you know what you are doing, you understand the requirements for your situation and have everything you need at hand.
Do not flash anything EVER if you do not know what bootloader version you have. That's like getting into your car blind folded and trusting that your GPS will drive you safely to your destination.
Every ROM has it's requirements in terms of bootloader version and recovery and they are usually clearly stated in the first couple of paragraphs in the OP of the rom thread. If not: Stay away from that rom unless you know exactly what you are doing!
TWRP 2.6.3.2 has major issues when formatting data from it. Stay away from it for now.
To find out what you can do to get a stable system back, you need to know where you are and what you have.
Boot into the bootloader (and do not use ROM Manager to do it!) and read the tiny script. It'll probably be 10.6.1.14.10 or .8
Post the result.
Boot into the recovery to check what you have installed. Versions matter!
The proper way of installing a custom recovery is in fastboot mode. Which is different from ADB, btw - you've been mixing those up I think.
Google "adb fastboot tutorial" and do some reading. Once you understand, get it set up on your PC, boot the tablet into the bootloader, connect both via original USB cable and test the connection with
Code:
fastboot devices
If it returns the serial number of your tablet, you are in business and we can continue from there.
Happy studying!
Getting there...
berndblb said:
Google "adb fastboot tutorial" and do some reading. Once you understand, get it set up on your PC, boot the tablet into the bootloader, connect both via original USB cable and test the connection with
Code:
fastboot devices
If it returns the serial number of your tablet, you are in business and we can continue from there.
Happy studying!
Click to expand...
Click to collapse
Alright, I have done some reading as far as all of this goes. I understand a lot of it better now.
So I'm positive now that it was because I hadn't updated my bootloader before trying through CWM. And TWRP obviously was no more useful.
I haven't quite checked what the bootloader version is - I think there may be something wrong with it still (given my weird boot-up) and I don't want to go there until I'm totally sure what I'm doing. I'd hate to hit bootloader and then realize something was seriously wrong, and my time was ticking.
However, I have never changed the bootloader since I used ASUS's one from their website originally - since it says v8, I imagine thats the .8 one?
Before I uninstalled ROM manager, I checked what it said my recovery was - and it said I had CWM 6.0.3.1 still, even though the TWRP fiasco has just gone down. I used ROM to reflash the same 6.0.3.1 from the device, and it said it was successful.
So before I begin, could i possibly ask a few questions?
1) Could I have corrupted the bootloader?
2) Can more than one recovery exist? Is it maybe true that CWM 6.0.3.1 would be the one I will boot into if I went into recovery? I REALLY don't want it to be TWRP again as it might not survive the experience (I had put TWRP on via fastboot). Should I just get to bootloader, flash a new recovery right away and go from there?
3) When I go to finally solve it, what are the hypothetical steps I should take? Right now, as far as I can tell, it will be:
a) Make sure all drivers are working, and files (including backup) are on my PC.
b) reboot into bootloader, check version.
c) flash the 10.6.1.14.4 bootloader
d) reboot
e) reboot into bootloader
f) flash CWM. 6.0.4.6
g) reboot
i) reboot into bootloader, into recovery, then flash CM 11 and gapps
j) reboot
Ya? No? Any help would be appreciated
Wadesauce said:
Alright, I have done some reading as far as all of this goes. I understand a lot of it better now.
So I'm positive now that it was because I hadn't updated my bootloader before trying through CWM. And TWRP obviously was no more useful.
I haven't quite checked what the bootloader version is - I think there may be something wrong with it still (given my weird boot-up) and I don't want to go there until I'm totally sure what I'm doing. I'd hate to hit bootloader and then realize something was seriously wrong, and my time was ticking.
However, I have never changed the bootloader since I used ASUS's one from their website originally - since it says v8, I imagine thats the .8 one?
Before I uninstalled ROM manager, I checked what it said my recovery was - and it said I had CWM 6.0.3.1 still, even though the TWRP fiasco has just gone down. I used ROM to reflash the same 6.0.3.1 from the device, and it said it was successful.
So before I begin, could i possibly ask a few questions?
1) Could I have corrupted the bootloader?
2) Can more than one recovery exist? Is it maybe true that CWM 6.0.3.1 would be the one I will boot into if I went into recovery? I REALLY don't want it to be TWRP again as it might not survive the experience (I had put TWRP on via fastboot). Should I just get to bootloader, flash a new recovery right away and go from there?
3) When I go to finally solve it, what are the hypothetical steps I should take? Right now, as far as I can tell, it will be:
a) Make sure all drivers are working, and files (including backup) are on my PC.
b) reboot into bootloader, check version.
c) flash the 10.6.1.14.4 bootloader
d) reboot
e) reboot into bootloader
f) flash CWM. 6.0.4.6
g) reboot
i) reboot into bootloader, into recovery, then flash CM 11 and gapps
j) reboot
Ya? No? Any help would be appreciated
Click to expand...
Click to collapse
1. No, your bootloader is still good because you still can boot into your system. You need your bootloader to initiate your hardware before your OS is booting.. I am very sure that is the case but it would be nice for someone to confirm it...
2. Your recovery partition is too small for two custom recoveries to exist. So it is almost impossible for you to have two recoveries..
Before you want to go further, it is easier to find out your bootloader and recovery versions so you know what is the next step that you need to do. Otherwise, it is just a guess or a shot in the dark... I think that you are fine but you need to wait for some experts to confirm it... Good luck...:fingers-crossed:
Please bear with me
LetMeKnow said:
Before you want to go further, it is easier to find out your bootloader and recovery versions so you know what is the next step that you need to do. Otherwise, it is just a guess or a shot in the dark... I think that you are fine but you need to wait for some experts to confirm it... Good luck...:fingers-crossed:
Click to expand...
Click to collapse
Sorry hahah, I know I must seem really frustrating...
I have held off for 2 reasons:
1. The first time I did a soft reboot after my fiasco, upon boot it went through the first series of steps trying to load into the bootloader, but then booted fine. Another time a few days after, it rebooted while i was using it, and just went blank after the asus logo. Holding the power down caused it to boot fine. Still, neither of those had ever happened before, and I am pretty sure that some point along the line of bootloader-->OS something is broken. Hopefully on the OS side.
2. I am not going to attempt to boot into recovery until I know that it isn't the same TWRP 2.6.3.2 that got me into this whole fiasco. I know it sounds like a catch 22, not wanting to reboot into recovery to check what it is, but I have NO IDEA how to get out of this TWRP as it stands. I had to flash a CROMI (which failed at 87%) and hard reboot. Not willing to go out on a limb and assume that hard-reboot will work during any step of that process.
So, why do I have to check it? Can't I boot into bootloader, flash a new bootloader, flash a new recovery, and then reboot normally? Assuming I'll be able to establish fastboot (drivers still work, so fingers crossed on that one).
Hi Guys,
Yesterday I installed Viper One S 3.0.0 on my Phone.
Installation went ok. Used TWRP by the way.
After the message of succesful installation i rebooted the Phone.
Now it's stuck in a bootloop. I can get into recovery, but there I cannot do anything. It doesn't seem to see the Internal storage, so restoring the backup I made of the stock ROM is also not possible.
Anyone an idea how to get this ROM to work, or how I can get back to the Stock firmware? I kinda need this Phone.
And does anyone know if the SD card is wiped? Or just not visible?
Any help would be much appriciated.:good::good::good:
mmarkvoort said:
Hi Guys,
Yesterday I installed Viper One S 3.0.0 on my Phone.
Installation went ok. Used TWRP by the way.
After the message of succesful installation i rebooted the Phone.
Now it's stuck in a bootloop. I can get into recovery, but there I cannot do anything. It doesn't seem to see the Internal storage, so restoring the backup I made of the stock ROM is also not possible.
Anyone an idea how to get this ROM to work, or how I can get back to the Stock firmware? I kinda need this Phone.
And does anyone know if the SD card is wiped? Or just not visible?
Any help would be much appriciated.:good::good::good:
Click to expand...
Click to collapse
Can you go in to fast boot and give this commanded
Fastboot getvar all
Hide your imei and serial number
also this should help you if you don't know who to go back to stock with a ruu http://forum.xda-developers.com/showthread.php?p=51016203
Sent from my SPH-L710 using Tapatalk
Flashalot said:
Can you go in to fast boot and give this commanded
Fastboot getvar all
Hide your imei and serial number
also this should help you if you don't know who to go back to stock with a ruu http://forum.xda-developers.com/showthread.php?p=51016203
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Thanks for the update. I Will do that tonight.
Also got the tip from Bilal to flash the Boor.img via fastboot and then try if it boots.
Will get back to you!
Hi,
I had the same problem, i had installed the viper rom twice (second time without wiping) and then it worked. I also had the 'no ds card found' error. This fixed it for me:
1) Use the All-in-One-Kit and flash your recovery back to stock
2) Boot into the bootloader and choose to "clear storage" and afterwards to reset to factory defaults.
3) Go back to the all-in-one-kit and flash a CWM recovery version again.
4) Reboot into recovery (CWM). Your /sdcard should now be mounted and visible.
Martin_Weterholt said:
Hi,
I had the same problem, i had installed the viper rom twice (second time without wiping) and then it worked. I also had the 'no ds card found' error. This fixed it for me:
1) Use the All-in-One-Kit and flash your recovery back to stock
2) Boot into the bootloader and choose to "clear storage" and afterwards to reset to factory defaults.
3) Go back to the all-in-one-kit and flash a CWM recovery version again.
4) Reboot into recovery (CWM). Your /sdcard should now be mounted and visible.
Click to expand...
Click to collapse
Thanks for the update. I have the Toolkit, but which button is for the Stock Recovery?
Ok so I'm a bit further. I Flashed an Original Recovery I found in the thread of the Toolkit. That didn't boot.
But afterwards I flashed the TWRP again. Now I see the SD card again.
Only problem now is to send a ROM to the SD card for installation.
ADB is not working properly on my WIndows 7 X64 machine.
Anybody any ideas on that??
mmarkvoort said:
Ok so I'm a bit further. I Flashed an Original Recovery I found in the thread of the Toolkit. That didn't boot.
But afterwards I flashed the TWRP again. Now I see the SD card again.
Only problem now is to send a ROM to the SD card for installation.
ADB is not working properly on my WIndows 7 X64 machine.
Anybody any ideas on that??
Click to expand...
Click to collapse
TWRP has a mount option. Connect your device to your computer then press MOUNT from twrp. That should solve your problem.
Sent from my One S
ka_55 said:
TWRP has a mount option. Connect your device to your computer then press MOUNT from twrp. That should solve your problem.
Sent from my One S
Click to expand...
Click to collapse
Ok cool. I will try it om my win7 laptop tonight. Just tried it on my work laptop, but that;s Win8 and doesn't see the Phone when I plug it in.
mmarkvoort said:
Ok cool. I will try it om my win7 laptop tonight. Just tried it on my work laptop, but that;s Win8 and doesn't see the Phone when I plug it in.
Click to expand...
Click to collapse
You can reboot your phone in recovery, in TWRP select mount, wait a minute, and then Windows 8 should 'see' your device
Martin_Weterholt said:
You can reboot your phone in recovery, in TWRP select mount, wait a minute, and then Windows 8 should 'see' your device
Click to expand...
Click to collapse
Ok, i'll give it a go!
Dank u
Hi Guys,
Got everything working again.
USB connected to my WIN8 machine after all, and i was able to copy the Viper 3.1.0 rom to the SD.
After 2 times installation (1 with TWRP Wipe, and then 1 with Wipe from Aroma installer) it worked.
1st install worked until I rebooted. Then bootloop again.
2nd time wipe from Aroma and all is working fine now.
Everybody thank you for helping. Much appriciated.:good::good::good::good::good:
mmarkvoort said:
Hi Guys,
Got everything working again.
USB connected to my WIN8 machine after all, and i was able to copy the Viper 3.1.0 rom to the SD.
After 2 times installation (1 with TWRP Wipe, and then 1 with Wipe from Aroma installer) it worked.
1st install worked until I rebooted. Then bootloop again.
2nd time wipe from Aroma and all is working fine now.
Everybody thank you for helping. Much appriciated.:good::good::good::good::good:
Click to expand...
Click to collapse
Nice going! goed gedaan!
Just 1 little thing I found. Maybe someone knows how to fix it.
Every now and then the Phone just reboots. Then it works fine for a while. Is this a known issue?
Besides that I'm loving this ROM. It's fast, customizable it just works great!! Respect to the Developer!!
Actually it might be a little more complicated...
Full story: I was trying to flash cyanogenmod so I unlocked the bootloader and flashed cwm and SuperSU. Until this point everything worked just fine. I copied the CM-zip to the root of my phone. When trying to install CM however I got an error saying "Some changes failed" (Status 7), basically this. Also I started having trouble booting the system normally. The phone would either get stuck at the bootloader unlocked screen or just boot into recovery. I had done a backup at some point (not prior to starting to try to flash CM, I didn't really think I'd need one since the phone was brand new and I didn't there was any data on it I'd miss... yeah, well...) and sometimes restoring it would enable me to boot normally. However, after the factory reset before my nth attempt to install CM, that was gone as well. After doing a bit of research I found this thread. Since I had version 6.0.13 of cwm as well, I flashed twrp v2.7.1.2 instead. The interface is a little friendlier, but other than that there have been no changes.
Now I can't boot the system normally, not even by selecting "System" when rebooting it from recovery, it will just keep booting into recovery. I can still fastboot, though. My CM-zip is gone since that infamous factory reset and I can't get it back on the phone, or anything else for that matter, since my pc only detects the phone when it's booted normally. I tried pushing CM with adb but when I try to mount any partition I get an error saying E: Unable to find storage partition to mount to USB.
Any ideas how I could fix this mess? Or suggestions on how to avoid ****ing it up any further...
If you can adb, you can adb push... You are just adb push'ing to the wrong place I suppose.
Code:
adb push blah.zip /sdcard/
Should work...
Or even better, just sideload (put phone in recovery & 'sideload mode' before running):
Code:
adb sideload blah.zip
Either way, CWM for our device is ancient and does not support the latest ROM's. The version of TWRP should work fine, as should the latest OpenRecovery (2.09 IIRC).
Sideload worked perfectly! Thank you so much!
cm11 working only TWRP here , with cwm appears same error
mmichaelalves said:
cm11 working only TWRP here , with cwm appears same error
Click to expand...
Click to collapse
Did you not read my post?
arrrghhh said:
Either way, CWM for our device is ancient and does not support the latest ROM's. The version of TWRP should work fine, as should the latest OpenRecovery (2.09 IIRC).
Click to expand...
Click to collapse
I'm screwed. I attempted to install an updated TWRP, so i selected that option in ROM Toolbox Pro. Everything installed correctly (TWRP 2.7??). I decide let me see if TWRP installer will replace that with the updated 2.8.5. I run TWRP installer and it installs correctly. My assumption was that the TWRP installer would overwrite the ROM Toolbox version. Well, i reboot into the 2.8.5 recover (like it suggested) and i hit Reboot and then it reboots into 2.7. From there it thinks there is no OS installed. Rebooting from there just reboots me back in 2.7 recovery. I can get into Fastboot, and then back in 2.8.5 recovery. I flashed a new ROM, but that didn't fix it. I attempted to flash an RUU but i can't seem to get that working either. Am I completely screwed and should i call insurance on it?
Help me XDA, you're my only hope.
theoden144 said:
I'm screwed. I attempted to install an updated TWRP, so i selected that option in ROM Toolbox Pro. Everything installed correctly (TWRP 2.7??). I decide let me see if TWRP installer will replace that with the updated 2.8.5. I run TWRP installer and it installs correctly. My assumption was that the TWRP installer would overwrite the ROM Toolbox version. Well, i reboot into the 2.8.5 recover (like it suggested) and i hit Reboot and then it reboots into 2.7. From there it thinks there is no OS installed. Rebooting from there just reboots me back in 2.7 recovery. I can get into Fastboot, and then back in 2.8.5 recovery. I flashed a new ROM, but that didn't fix it. I attempted to flash an RUU but i can't seem to get that working either. Am I completely screwed and should i call insurance on it?
Help me XDA, you're my only hope.
Click to expand...
Click to collapse
To solve this, you could get phone into Fastboot and flash Dottat's RUU for the M8 - he made several versions.
For sure, add HTC_Fastboot.exe to your ADB folder and use it, NOT regular fastboot.
It will overwrite your previous recovery with stock and fix your phone. Then later, you could flash TWRP 2.8.7 thru Fastboot.
I put Dottat's RUU on my external SD card and it loaded, however, whenever it goes to reboot, it still goes back into the wrong recovery.
It's probably not necessary to run an RUU. You incorrectly flashed the new recovery to the wrong partition. Flash the new recovery VIA FASTBOOT, boot into it through the bootloader screen, and either flash a rom or restore a backup and you should be good to go. You definitely don't need to be worrying about an insurance claim for now.
Edit: by VIA FASTBOOT I mean with the command fastboot flash recovery <nameofrecoveryfile>.img
cntryby429 said:
It's probably not necessary to run an RUU. You incorrectly flashed the new recovery to the wrong partition. Flash the new recovery VIA FASTBOOT, boot into it through the bootloader screen, and either flash a rom or restore a backup and you should be good to go. You definitely don't need to be worrying about an insurance claim for now.
Edit: by VIA FASTBOOT I mean with the command fastboot flash recovery <nameofrecoveryfile>.img
Click to expand...
Click to collapse
I would flash firmware or ruu, if indeed he flashed recovery to wrong partition, that partition needs the correct one which firmware wlil do, and ruu will 100% do.
Personally I'd run ruu, go to stock recovery and run a factory reset.
theoden144 said:
I put Dottat's RUU on my external SD card and it loaded, however, whenever it goes to reboot, it still goes back into the wrong recovery.
Click to expand...
Click to collapse
Gotta use ADB and HTC_Fastboot.exe
Thanks for all the tips. I tried re-installing the old ROM after I ran the RUU and it worked. Hopefully it cleared out the incorrect recovery. Lesson learned: don't use apps to update the recovery!
Again thanks for all the help!
theoden144 said:
Thanks for all the tips. I tried re-installing the old ROM after I ran the RUU and it worked. Hopefully it cleared out the incorrect recovery. Lesson learned: don't use apps to update the recovery!
Again thanks for all the help!
Click to expand...
Click to collapse
Twrp manager is not a safe way to flash recovery because they aren't flashing by block name yet. They are still hard-coded to block number. The partitions have changed during ota already...so the app does hose things up a bit.
Sent from my Nexus 6 using Tapatalk