Hi guys just rooted my phone with towelroot (d838) and was attempting to boot in to the bootloader while holding the power button and volume down and it restarted normally untill it had booted and the first thing I saw was, the words safe mode at the bottom of the screen in the left hand corner and when I opened up my phone, all my apps had gone and it appeard like I had just turned it on for the first time after another reboot its back to normal just woundered if anyone knows more about this?
Related
Hello. After bricking my device and getting it working again, I decided to factory set it. When it was booting, it came up with the yellow triangle. I can't seem to get out of it. PLEASE HELP. Thank you so much.
Edit to clarify: I wouldn't be so worried if this didn't happen while trying to reset my entire phone... Is there any way out of this? I can't seem to get into download mode.
Edit 2: It says SECURE FAIL: KERNEL at the screen and before the screen pops up, it says in the upper left hand corner in blue it says RECOVERY BOOTING...
Got it. Thank christ. Now Odin won't detect my phone.
Edit: I got it to work by holding volD+Home+Power. When the screen flashed the warning and is about to boot into the error, I pressed the volD button very fast until the warning for download mode came up.
EDIT: Surefire way to get into device: Make the screen go black if it isn't already by pressing the power button. After the screen goes black, hold down volDO+home for about two seconds and then, without releasing your fingers, start holding the power button. The download mode warning screen will flash briefly and then it will go off again. Once you see that screen flash, release your finger off of the power button. When the screen goes off, start holding the power button again. The next screen that loads should be the download mode warning. Instead of clicking "download mode" (unless that was your intent), click volDO to restart phone into regular mode.
Sorry, i am really new to this site, and never had a problem like this with a previous phone.
I get home from the grocery store and my phone is off, so it seems, plugged in it, got the M to pop up do the little world thing, then the screen goes to black,
i leave it to charge a little while, come back, and everthing on my phone is working , except for the actual display{now i know its not the display or screen because when i boot it there are no problems with the boot/restart} and if i touch around the screen it lightly vibrates, weird,
i put it to boot menu and my first time trying a normal restart nothing, so i go to motorolas website to get an application to back up my data or something get the motorola device manager and its useless, all it does is tell me my drivers are up to date, look around some more for an easy backup program can't find any except one that won't connect because i can't see where to press ok on the screen
just ended up copy pasting over all 5 gigs of hardrive space
i try to do factory reset, but if i click factory on the boot menu it just restarts it, if i go into recovery it pops up the picture of the opened android robot, and says no command, i have tried pressing volume up for 15 seconds, and then taping the power button to no avail,
interestingly enough once i managed to get the screen on for the phone then it faded to black like a screen saver never to come back.
Anyone know what i can do to unbrick the phone?a program that i can go in and restore it back to factory settings?
i recently updated to 5.0 maybe on friday, haven't had problems, or dropped phone since then
just extremely frustrating,
Recovery key combination was changed after lollipop. Press and hold power button for few seconds and then tap vol up (when you see android robot and no command)
Sent from my XT1033 using XDA Free mobile app
U can flash stock firmware also from your pc..press vol down + power button for fastbootmod then press vol down and then vol up and power button for recovery mod
Just some minutes ago my S7 froze because of Focus Gallery App. I don't exactly know what it did but the phone did not respond any more.
So pressing the power button did not bring back the phone either. After searching for a bit I found a way to simulate a bettery disconnect by pressing Volume Down + Power Button.
The Phone came back up and displayed the initial boot logo. Also the blue LED is on. But nothing happens from here on. I do not come to the "Samsung" boot animation and the phone simply
does nothing. Retriying Volume Down + Power Button doesn't seem to help too. I tryed all button combinations but nothing brings the phone back.
I also cannot enter the recovery menu. So no chance to reset to default settings.
I am running a stock Android on the phone. Nothing was done by me. No custom ROM, no root, just plain Samsung Android.
Is there sill something I can do?
Edit: I just got into whats seems to be ODIN Mode??? Can I do something from here?
Oddly this happened to me last night although I may have inadvertently done it. But the only way I was able to get my phone functioning again was reflashing the OS to the phone.
How did you manage to get the phone into Odin mode? I'm having the same issue with the phone being totally unresponsive but the blue LED on.
if you can reboot your phone with the VOL Down/Power, when the screen goes black, quickly press and hold VOL Up, Home and Power. it should enter recovery. or hold Vol down, Home and Power to enter the download screen.
I have the S7 Edge (rooted, custom ROM) and it's running fine. My girlfriend's regular S7 is having the same issue though.
When she plugged it in to charge last night, she checked it a few minutes later at which point the phone had (started to) reboot. The blue notification LED was on and the screen had frozen at the 'SA' from the 'SAMSUNG' startup logo. Forced a reboot with down+power, resulting in just the blue LED (no logo this time). Phone was unresponsive (couldn't force a reboot again) so left the battery to drain overnight. The phone is completely dead today even after charging - no LED, no boot, no anything.
I'm not sure if she had the phone scheduled to perform an update overnight and it froze halfway through, but that would be my first guess. So far, no fix.
Hi guys, this is my very first thread so here goes nothing,
I recently damaged my S8 + power button and it is no longer operational, however i have been able to boot to download mode and reset device after it going flat and not turning back on and staying in a bootloop while plugged in. Any way so my new problem is that it went flat again and i plugged it into charge and it automatically boots into recovery mode and when i manage to get it into download mode pressing volume up or down does not work. Any way to fix this and get my phone back up and running?
I can definitely see that being a ***** because you need the power button in sequence with Bixby and a vol button to get to download mode or recovery. Id prob root the phone and install quick shortcuts app that gives you on/off/reboot/restart/ options it might help you. But replacing the power button is a simple procedure and I'm sure it's very cheap to. Id fix that button and problem solved.
Was watching youtube videos last night before my phone died, now I can't get it to start boot into the OS. Not sure if this is relevant but my power button had been a little finnicky- rather maybe not the power button itself because it doesn't feel stuck or anything at all but I noticed that it would take an extra second or two after pressing the power button to get into my lock screen. I never really paid attention because it only happened once in a while and I would just restart my phone and be done with it. However I can't even get into the lock screen or anything now.
After my phone died last night I plugged it in right away and came back a while later to turn it on. I tried turning it on but noticed my phone just kept rebooting. It's still repeatedly rebooting and I can only get in the fastboot menu by holding down both volume buttons when rebooting. I get the options power off- which just reboots it after a while, start - which just reboots the phone, restart boot loader- which literally takes me back to the same menu, recovery mode- just reboots and show barcode which shows the barcode at the bottom of the menu.
I've tried downloading the qualcomm driver and trying to get into EDL mode but don't see it on my pc or msmtool, i'm also not even sure if i'm trying to get into EDL mode correctly. I've tried disable Driver signature Enforcement and then redownloading the qualcomm driver but still no luck. I don't know what else I should try. Someone please help me out, i'm pissed this happened just because my phone died, about to have ptsd whenever my phone is at 5% fml.
Also after seeing the 1+ logo and powered by android on the bottom, sometimes I would see like a line of color, which I would assume is text not being rendered all the way, fade out and then the phone shuts down and reboots itself.
yellownese said:
Was watching youtube videos last night before my phone died, now I can't get it to start boot into the OS. Not sure if this is relevant but my power button had been a little finnicky- rather maybe not the power button itself because it doesn't feel stuck or anything at all but I noticed that it would take an extra second or two after pressing the power button to get into my lock screen. I never really paid attention because it only happened once in a while and I would just restart my phone and be done with it. However I can't even get into the lock screen or anything now.
After my phone died last night I plugged it in right away and came back a while later to turn it on. I tried turning it on but noticed my phone just kept rebooting. It's still repeatedly rebooting and I can only get in the fastboot menu by holding down both volume buttons when rebooting. I get the options power off- which just reboots it after a while, start - which just reboots the phone, restart boot loader- which literally takes me back to the same menu, recovery mode- just reboots and show barcode which shows the barcode at the bottom of the menu.
I've tried downloading the qualcomm driver and trying to get into EDL mode but don't see it on my pc or msmtool, i'm also not even sure if i'm trying to get into EDL mode correctly. I've tried disable Driver signature Enforcement and then redownloading the qualcomm driver but still no luck. I don't know what else I should try. Someone please help me out, i'm pissed this happened just because my phone died, about to have ptsd whenever my phone is at 5% fml.
Also after seeing the 1+ logo and powered by android on the bottom, sometimes I would see like a line of color, which I would assume is text not being rendered all the way, fade out and then the phone shuts down and reboots itself.
Click to expand...
Click to collapse
Which OOS build are you on? And your device is unlocked or not?
Getting into EDL mode is tricky. Power off device completely. With the device powered off, hold down volume up and volume up at the same time, keep them pressed all the time, and during that time plug into PC (phone all the time powered off). Still hold both of the buttons. By the time you plug into PC, you should be in EDL mode, BUT it only lasts about 10 seconds. I mean you have to click start in this 10 seconds time bracket, other way phone exits EDL itself. After you click start, you can release button, obviously